标准号 |
中文名称 |
英文名称 |
| ANSI/IPC 2578-2001 |
材料和产品设计结构数据清单供应链通信系统的分要求.产品数据交换 |
Sectional Requirements for Supply Chain Communication of Bill of Material and Product Design Configuration Data - Product Data eXchange |
| ANSI/IPC 2581-2004 |
制造描述数据和转换方法的印制板装配产品的一般要求 |
|
| ANSI/IPC 4101A-2002 |
硬质多层印制电路板基底材料的规范 |
(Specification for Base Materials for Rigid and Multilayer Printed Boards ) |
| ANSI/IPC 4101AAMD 1-2002 |
硬性和多层印制电路板的基底材料规范 |
(Specification for Base Materials for Rigid and Multi-layer Printed Boards ) |
| ANSI/IPC 4110-1998 |
确定印制板用非织物多孔板特性的方法和规范 |
Specification and Characterization Methods for Nonwoven Cellulose Based Paper for Printed Boards |
| ANSI/IPC 4121-1999 |
多层印制线路板的选择芯结构指南 |
Guidelines for Selecting Core Constructions for Multilayer Printed Wiring Boards |
| ANSI/IPC 4202-2002 |
柔性印制线路用柔性裸绝缘材料 |
(Flexible Bare Dielectrics for Use in Flexible Printed Wiring ) |
| ANSI/IPC 4203-2002 |
作柔性印制线路和柔性粘合膜片覆盖层用的涂覆粘合剂的绝缘膜 |
(Adhesive coated Dielectric Films for Use as Cover Sheets for Flexible Printed Wiring and Flexible Adhesive Bonding Films ) |
| ANSI/IPC 4204-2002 |
制备柔性印制线路用的柔性金属包覆的绝缘材料 |
(Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Wiring ) |
| ANSI/IPC 4411-1999 |
非织物增强的测定特性的方法和规范 |
Specification and Characterization Methods for Nonwoven Para-Aramid Reinforcement |
| ANSI/IPC 4412-2002 |
印制电路板用“E“级成品编织物规范 |
(Specification for Finished Fabric Woven from “E“ Glass for Printed Boards ) |
| ANSI/IPC 4552-2002 |
印制电路板用无电镍/浸金(EMIG) 印纹规范 |
(Specification for Electroless Nickel/Immersion Gold (EMIG) Plating for Printed Circuit Boards ) |
| ANSI/IPC 4553-2005 |
印制电路板用浸银电镀规范 |
|
| ANSI/IPC 6016-1999 |
高密度互连层或板的性能规范和质量 |
Qualification and Performance Specification for High Density Interconnect (HDI) Layers or Boards |
| ANSI/IPC 6018A-2002 |
微波终端产品电路板监测和试验 |
(Microwave End Product Board Inspection and Test ) |
| ANSI/IPC 7095-2000 |
BGAs用的设计和组件加工应用 |
Design and Assembly Process Implementation for BGAs |
| ANSI/IPC 7525-2000 |
模板设计指南 |
Stencil Design Guidelines |
| ANSI/IPC 7912A-2004 |
印制电路板组件的末端装置DPMO |
|
| ANSI/IPC 9504-1998 |
非IC常件的评价组件加工模拟 |
Assembly Process Simulation for Evaluation of Non-IC Components |
| ANSI/IPC 9701-2002 |
表面安装焊料附件的合格和性能试验方法 |
(Qualification and Performance Test Methods for Surface Mount Solder Attachments ) |
| ANSI/IPC 9850-2002 |
表面安装设备特性描述 |
(Surface Mount Equipment Characterization ) |
| ANSI/IPC A-22-1991 |
保险商实验室标准UL796和UL746试验模型工艺和试样制备 |
Test Pattern Artwork and Sample Preparation for Underwriters Laboratories Standards UL 796 and UL 746 |
| ANSI/IPC A-600E-1996 |
印制板的可接受性 |
Acceptability of Printed Boards |
| ANSI/IPC A-610B-1995 |
印制板组件的合格条件 |
Acceptability of Printed Board Assemblies |
| ANSI/IPC A-610D-2005 |
印刷板组件的合格判定 |
|
| ANSI/IPC AC-62-1986 |
接地端子焊料水清洗指南 |
Post Solder Aqueous Cleaning Handbook |
| ANSI/IPC BP-421-1981 |
带有压配合触点的硬印制底板 |
Backplanes with Press-Fit Contacts, Rigid Printed Board |
| ANSI/IPC CC-830-1984 |
印制板组件的电绝缘化合物的合格条件和性能 |
Electrical Insulating Compound for Printing Board Assemblies, Qualifications and Performance of |
| ANSI/IPC CC-830B-2002 |
印制板组件的电绝缘化合物的合格条件和一致性 |
(Electrical Insulating Compound for Printing Board Assemblies, Qualifications and Performance of ) |
| ANSI/IPC CF-148-1990 |
印制线路板用树脂覆层金属 |
Resin-Coated Metal for Printed Boards |
| ANSI/IPC CF-150E-1981 |
印制线路用铜箔的规范 |
Copper Foil for Printed Wiring Applications, Specification for |
| ANSI/IPC CH-65-1991 |
印制电路板的清洗导则 |
Guidelines for Cleaning of Printed Boards |
| ANSI/IPC CM-770C-1987 |
印制板件安装指南 |
Printed Board Component Mounting, Guidelines for |
| ANSI/IPC D-310C-1990 |
图模制作和测量技术导则 |
Guidelines for Phototool Generation and Measurement Techniques |
| ANSI/IPC D-317-1990 |
高速电子技术封装设计导则 |
Design Guidelines for Electronic Packaging Utilizing High-Speed Techniques |
| ANSI/IPC D-322-1984 |
用标准板面尺寸选择印制线路板尺寸的导则 |
Selecting Printed Wiring Board Sizes Using Standard Panel Sizes, Guidelines for |
| ANSI/IPC D-325A-1995 |
印制电路板、组件和配套图形的文件编制要求 |
Documentation Requirements for Printed Boards, Assemblies and Support Drawings |
| ANSI/IPC D-326-1991 |
生产印制电路板组件的信息要求 |
Information Requirements for Manufacturing Printed Board Assemblies |
| ANSI/IPC D-356-1992 |
数字形式裸板电气测试信息 |
Bare Board Electrical Test Information in Digital Form |
| ANSI/IPC D-859-1990 |
厚膜多层混合电路设计标准 |
Design Standard for Thick Film Multilayer Hybrid Circuits |
| ANSI/IPC DW-425A-1990 |
分立线路板的设计及最终产品要求 |
Wiring Boards, Design and End-Product Requirements for Discrete |
| ANSI/IPC FC-241C-1992 |
制造挠性印制线路用的覆金属的挠性电介质规范 |
Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Wiring |
| ANSI/IPC FC-250A-1987 |
单面和双面挠性印制线路规范 |
Specification for Single- and Double-Sided Flexible Printed Wiring |
| ANSI/IPC HDBK-610-2002 |
IPC-A-610的手册和指南(包括IPC-A-610B和C的比较) |
(Handbook and Guide to IPC-A-610 (Includes IPC-A-610B and C Comparison) ) |
| ANSI/IPC HF-318A-1991 |
微波终端产品宽频带检验及试验 |
Microwave End Product Board Inspection and Test |
| ANSI/IPC J-STD-001D-2005 |
焊接的电气和电子组件的要求 |
|
| ANSI/IPC J-STD-004A-2004 |
助焊剂的要求 |
|
| ANSI/IPC MB-380-1990 |
模制互连装置指南 |
Guidelines for Molded Interconnection Devices |
| ANSI/IPC PC-90-1990 |
统计过程控制实施的一般要求 |
General Requirements for Implementation of Statistical Process Control |
| ANSI/IPC PC-90/1-1993 |
审查样板 |
Audit Templates |
| ANSI/IPC QF-143-1992 |
印制电路板用石英(纯净熔融硅石)丝织成的成品纤维规范 |
Finished Fabric Woven from Quartz (Pure Fused Silical) for Printed Boards, Specification for |
| ANSI/IPC RF-245-1987 |
刚性弯曲印制电路板性能规范 |
Rigid-Flex Printed Boards, Performance Specification for |
| ANSI/IPC S-815B-1987 |
钎焊电子互连件的一般要求 |
Soldering Electronic Interconnections, General Requirements for |
| ANSI/IPC SC-60A-1999 |
软钎焊焊剂清洁手册 |
Post Solder Solvent Cleaning Handbook |
| ANSI/IPC SG-141-1992 |
用S玻璃丝编的印制电路板用成品玻璃丝 |
Finished Fabric Woven from S Glass for Printed Boards |
| ANSI/IPC SM-782-1987 |
印制电路板表面安装接点形式(配置和设计规则) |
Printed Circuits - Surface Mount Land Patterns (Configurations and Design Rules) |
| ANSI/IPC SM-784-1990 |
电路板上芯片技术实施导则 |
Guidelines for Chip-on Board Technology Implementation |
| ANSI/IPC SM-785-1993 |
表面安装焊接件加速可靠测试 |
Accelerated Reliability Testing of Surface Mount Solder Attachments |
| ANSI/IPC SM-840C Amendment 1-2000 |
永久焊接罩的性能和质量要求 |
Qualification and Performance of Permanent Solder Mask |
| ANSI/IPC T-50E-1992 |
电子线路互连及封装的术语和定义 |
Terms and Definitions for Interconnecting and Packaging Electronic Circuits |
| ANSI/IPC WHMA-A-620-2002 |
电缆和导线系列组件的要求和验收 |
(Requirements and Acceptance for Cable and Wire Harness Asssemblies ) |
| ANSI/IPC/EIA J-STD-001C-2000 |
钎焊电气和电子组件的要求 |
Requirements for Soldered Electrical and Electronic Assemblies |
| ANSI/IPC/EIA J-STD-002B-2003 |
件引线、终端、接线片和电线的可钎焊性试验 |
(Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires ) |
| ANSI/IPC/EIA J-STD-006A, AM1-2002 |
电子钎焊用电子级钎料合金及助熔和不助熔固体钎料的要求 |
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications |
| ANSI/IPC/EIA J-STD-006A-2002 |
电子钎焊用电子级钎料合金及助熔和不助熔固体钎料的要求 |
(Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications ) |
| ANSI/IPC/JEDEC J-STD-020B-2002 |
远程通信.湿敏件的分类 |
(Telecommunications - Classification of Moisture Sensitive Components ) |
| ANSI/IPC/JEDEC J-STD-033A-2002 |
对潮气/回流敏感的表面安装器械的搬运、包装、船运和使用 |
(Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices ) |
| ANSI/IPC/JPCA 4104-1999 |
高密度互连材料规范 |
Specification for High Density Interconnect (HDI) and Mcrovia Materials |
| ANSI/ISA 12.00.01-2002 |
在I级0、1或2区危险位置上用的电气设备:一般要求 |
(Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements ) |
| ANSI/ISA 12.00.01-2005 |
在I级0和1区危险场所用的电气设备.一般要求 |
|
| ANSI/ISA 12.02.01-2002 |
I级0,1,&2危险区使用的电气设备.内在防爆安全“i“ |
(Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations - Intrinsic Safety “i“ ) |
| ANSI/ISA 12.10.05-2004 |
20,21和22危险区域(已划分的)中使用的电气装置.20,21和22危险区域的分类 |
|
| ANSI/ISA 12.12.02-2003 |
I级2区危险场所用电气设备.“n“型防护电气设备 |
(Electrical Apparatus for Use in Class I Zone 2 Hazardous (Classified) Locations - Type of Protection “n“ ) |
| ANSI/ISA 12.13.01-2000 |
性能要求,燃烧气体检测器 |
Performance Requirements, Combustible Gas Detectors |
| ANSI/ISA 12.13.01-2002 |
燃烧气体检测器的性能要求 |
(Performance Requirements, Combustible Gas Detectors ) |
| ANSI/ISA 12.16.01(IEC 60079-7)-2002 |
I类1型地带灾害地址设置用电子设备:增加安全性“e“的防护类型 |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
| ANSI/ISA 12.16.01-2002 |
I级1危险区使用的电气设备.防护类型:增安型“e“ |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
| ANSI/ISA 12.27.01-2002 |
电系统和易燃加工流体间加工密封要求 |
(Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids ) |
| ANSI/ISA 60079-1(12.22.01)-2005 |
等级I、危险区域1(已分级)场所用电气器具:保护类型.阻燃d型 |
|
| ANSI/ISA 60079-18(12.23.01)-2005 |
等级I、危险区域1(已分级)场所用电气器具:保护类型.密封m型 |
|
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
测量、控制和实验室用电气设备的安全要求.第1部分:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
测量、控制和实验室用电气设备的安全要求.第1部分:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01), CSA-C 22.2, No. 1010-1, UL-61010-1-2004 |
电气和电子试验、测量、控制和相关设备:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01)-2004 |
电力和电子试验、测量、控制和相关设备:一般要求 |
|
| ANSI/ISA 67.06.01-2002 |
在核发电厂中有关和仪器频道安全的性能监测 |
(Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants ) |
| ANSI/ISA 75.01.01-2002 |
尺寸控制阀用流量方程式 |
(Flow Equations for Sizing Control Valves ) |
| ANSI/ISA 75.08.01-2002 |
整体式带凸缘的球型控制阀体的面对面尺寸(类型125、150、250、300和600) |
(Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) ) |
| ANSI/ISA 75.08.02-2003 |
无凸缘的控制阀端面间的尺寸(级别150、300和600) |
(Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) ) |
| ANSI/ISA 75.08.05-2002 |
端头对焊球型控制阀的面对面尺寸(类型150、300、600、900、1500和2500) |
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ) |
| ANSI/ISA 75.08.06-2002 |
带凸缘的球型控制阀体的面对面尺寸(类型900、1500和2500) |
(Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) ) |
| ANSI/ISA 75.08.09-2005 |
滑动杆无凸缘控制阀的端面间尺寸(类型150、300和600) |
|
| ANSI/ISA 76.00.02-2002 |
表面安装流体分配件用模块化件.第1部分:合成橡胶密封件 |
(Modular Component Interfaces for Surface-Mount Fluid Distribution Components--Part 1: Elastomeric Seals ) |
| ANSI/ISA 77.20-2005 |
矿物燃料发电厂模拟器.功能要求 |
|
| ANSI/ISA 77.41.01-2005 |
矿物燃料发电厂锅炉燃烧控制装置 |
|
| ANSI/ISA 77.44.02-2001 |
化石燃料动力工厂蒸气温度控制系统.一体型 |
Fossil Fuel Power Plant Steam Temperature Control System - Once-Through Type |
| ANSI/ISA 77.70-2005 |
矿物燃料发电厂设备管道安装 |
|
| ANSI/ISA 84.00.01Part 1-2004 |
功能安全.加工工业部门的安全仪表测量系统.第1部分:框架、定义、系统、硬件和软件要求 |
|
| ANSI/ISA 84.00.01Part 2-2004 |
功能安全.加工工业部门的安全仪表测量系统.第2部分:应用指南.信息 |
|
| ANSI/ISA 84.00.01Part 3-2004 |
功能安全.加工工业部门的安全仪表化系统.第3部分:所要求的安全完整性等级的测定指南.信息化 |
|
| ANSI/ISA 88.00.03-2003 |
按批控制.第3部分:总的生产模式和现场生产模式以及表示法 |
(Batch Control Part 3: General and Site Recipe Models and Representation ) |
| ANSI/ISA 95.00.01-2000 |
企业整体控制集成.第1部分:模型和术语 |
Enterprise-Control System Integration, Part 1: Models and Terminology |
| ANSI/ISA 95.00.02-2001 |
企业控制系统一体化.第2部分:对象模型属性 |
Enterprise-Control System Integration - Part 2: Object Model Attributes |
| ANSI/ISA 98.00.01-2002 |
控制系统技术员的资格和认证 |
(Qualifications and Certification of Control System Technicians ) |
| ANSI/ISA RP 12.15 Part II-1990 |
硫化氢检测工具的安装、操作和维修 |
Installation, Operation, and Maintenance of Hydrogen Sulfide Detection Instruments |
| ANSI/ISA RP 12.6-1995 |
危险场所的布线实施规程.工具.第I部分:内部安全 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
| ANSI/ISA RP12.13.02-2002 |
可燃气体检测装置的安装、运行和维护推荐实施规程 |
(Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments ) |
| ANSI/ISA S 12.01.01-1999 |
危险地点电气装置的信息和定义 |
Definitions and Information Pertaining to Electrical Apparatus in Hazardous (Classified) Locations |
| ANSI/ISA S 12.06.01-1995 |
危险(分级)地区的布线规程.设备.第I部分: 内在安全性 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
| ANSI/ISA S 12.12-1994 |
I、II级、2区和III级、1、2区危险场所用不易燃电气设备 |
Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations |
| ANSI/ISA S 12.22.01-2001 |
I级1区危险地带使用的电驱动装置:防护型.防火d |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof d |
| ANSI/ISA S 5.4-1991 |
测量环路图示 |
Instrument Loop Diagrams |
| ANSI/ISA S 50.02 Part 2-1992 |
工业控制系统用字段总线标准.第2部分:物理层规范和服务定义 |
Fieldbus Standard for Use in Industrial Control Systems Part 2: Physical Layer Specification and Service Definition |
| ANSI/ISA S 67.04 Part 1-1994 |
核安全相关仪器的设置点 |
Setpoints for Nuclear Safety-Related Instrumentation |
| ANSI/ISA S 67.10-1994 |
核电站中使用的抽样线管道标准 |
Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants |
| ANSI/ISA S 67.14-1994 |
核设施中测量和控制技术的鉴定和认证 |
Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities |
| ANSI/ISA S 7.0.01-1996 |
测量气体的质量标准 |
Quality Standard for Instrument Air |
| ANSI/ISA S 71.03-1995 |
工艺测量和控制用环境条件:机械的影响 |
Environmental Conditions for Process Measurements and Control: Mechanical Influences |
| ANSI/ISA S 75.08.03-2001 |
承插焊接端头和螺旋端头球状控制阀的面到面尺寸 |
Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/ISA S 75.08.04-2001 |
对焊端头球状控制阀的面到面尺寸 |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves |
| ANSI/ISA S 75.08.07-2001 |
独立法兰球状控制阀的面到面尺寸 |
Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com