标准号 |
中文名称 |
英文名称 |
| ANSI/AWWA B600-2005 |
粉末状活性碳 |
|
| ANSI/AWWA B601-2005 |
焦亚硫酸钠 |
|
| ANSI/AWWA B603-2003 |
高锰酸钾 |
(Potassium Permanganate ) |
| ANSI/AWWA C 104/A 21.4-1995 |
延性铁水管和配件用水泥砂浆衬 |
Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water |
| ANSI/AWWA C 105/A 21.5-1999 |
球墨铸铁管系统用聚乙烯包装物 |
Polyethylene Encasement for Ductile-Iron Pipe Systems |
| ANSI/AWWA C 110/A 21.10-1998 |
水和其他液体用球墨铸铁和灰口铸铁配件3-48英寸(75mm-1200mm) |
Ductile-Iron and Gray-Iron Fittings, 3 in through 48 in (75 mm through 1200 mm), for Water and Other Liquids |
| ANSI/AWWA C 111/A 21.11-2000 |
球墨铸铁压力管和配件用橡胶垫接头 |
Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings |
| ANSI/AWWA C 115/A 21.15-1994 |
水处理.带延性铁或灰口铸铁螺纹法兰的法兰延性铁管 |
Water Treatment - Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges |
| ANSI/AWWA C 116/A 21.16-1998 |
给水服务用的可锻铁和灰铁配件的内外表面的防护熔断粘合环氧涂层 |
Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service |
| ANSI/AWWA C 150/A 21.50-1996 |
延性铁管的厚度设计 |
Thickness Design of Ductile-Iron Pipe |
| ANSI/AWWA C 151/A 21.51-1996 |
离心铸造的延性铁水管 |
Ductile-Iron Pipe, Centrifugally Cast, for Water |
| ANSI/AWWA C 153/A 21.53-2000 |
给水用球墨铸铁压实配件3-24英寸(76mm-610mm)及54-64英寸(1400mm-1600mm) |
Ductile-Iron Compact Fittings, 3 in. through 24 in. (76 mm Through 610 mm) and 54 in. through 64 in. (1,400 mm Through 1,600 mm), for Water Service |
| ANSI/AWWA C 200-1997 |
钢制水管.大于和等于6英寸(150mm) |
Steel Water Pipe - 6 in (150 mm) and Larger |
| ANSI/AWWA C 203-1997 |
钢制水管用煤焦油保护覆层和衬.瓷漆和胶带.热用 |
Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied |
| ANSI/AWWA C 203a-1999 |
钢制供水管道的煤焦油保护涂层和内衬标准.搪瓷和胶带.热应用 |
Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied |
| ANSI/AWWA C 205-2000 |
钢制水管用水泥砂浆保护衬和覆层.大于等于4英寸(100mm).车间用 |
Cement-Mortar Protective Lining and Coating for Steel Water Pipe - 4 in (100 mm) and Larger - Shop Applied |
| ANSI/AWWA C 206-1997 |
钢制水管的现场焊接 |
Field Welding of Steel Water Pipe |
| ANSI/AWWA C 207-2001 |
给水工程用钢制管法兰.4英寸-144英寸(100mm-3600mm) |
Steel Pipe Flanges for Waterworks Service -- Sizes 4 in. through 144 in. (100 mm through 3,600 mm) |
| ANSI/AWWA C 208-1996 |
预制钢水管配件尺寸 |
Fabricated Steel Water Pipe Fittings, Dimensions for |
| ANSI/AWWA C 209-2000 |
钢制供水管道专用型钢、连接件和配件外部的低温用胶带包覆层 |
Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C 210-1997 |
钢制水管线的内外部用液体环氧树脂涂层系统 |
Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C 213-1996 |
钢制水管线的内外部用熔融粘结环氧树脂涂层 |
Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C 214-2000 |
钢制供水管道外部的胶带包覆系统 |
Tape Coating Systems for the Exterior of Steel Water Pipelines |
| ANSI/AWWA C 215-1999 |
钢制供水管道外部的模压聚烯烃涂层 |
Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines |
| ANSI/AWWA C 216-2000 |
钢制供水管道专用型钢、连接件和配件外部的可热收缩交联的聚烯烃涂层 |
Heat Shrinkable Crosslinked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C 217-1999 |
钢制供水管道专用型钢、连接件和配件外部的低温用矿脂带和矿脂腊油带包覆层 |
Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coating for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines |
| ANSI/AWWA C 218-1999 |
地面钢制供水管道和配件外部的涂覆 |
Coating the Exterior of Aboveground Steel Water Pipelines and Fittings |
| ANSI/AWWA C 219-2001 |
平头管用栓接套筒型联接器 |
Bolted, Sleeve-Type Couplings for Plain-End Pipe |
| ANSI/AWWA C 220a-1999 |
不锈钢管.4英寸.(100 mm) 及更大. ANSI/AWWA C220a-98的附录 |
Stainless Steel Pipe, 4 In. (100 mm) and Larger, Addendum to ANSI/AWWA C220a-98 |
| ANSI/AWWA C 221-2001 |
生产钢制机械套筒式补偿器 |
Fabricated Steel Mechanical Slip-Type Expansion Joints |
| ANSI/AWWA C 222-1999 |
钢水管和配件的内或外的聚氨基甲酸乙酯涂层 |
Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings |
| ANSI/AWWA C 224-2001 |
钢水管、连接件、配件及特殊部件的内、外的两层尼龙11基聚酰胺涂覆系统 |
Two Layer Nylon-11 Based Polyamide Coating System for Interior and Exterior of Steel Water Pipe, Connections, Fittings and Special Sections |
| ANSI/AWWA C 300-1997 |
水及其他液体用钢制圆柱形增强混凝土压力管 |
Reinforced Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids |
| ANSI/AWWA C 301-1999 |
水和其他液体用的预应力混凝土压力管,钢瓶型 |
Prestressed Concrete Pressure Pipe, Steel Cylinder Type, for Water and Other Liquids |
| ANSI/AWWA C 302-1995 |
非圆柱形增强混凝土压力管 |
Reinforced Concrete Pressure Pipe, Noncylinder Type |
| ANSI/AWWA C 303-1995 |
钢制圆柱形条绕的混凝土压力管 |
Concrete Pressure Pipe, Bar-Wrapped, Steel Cylinder Type |
| ANSI/AWWA C 304-1999 |
预应力混凝土筒体管的设计 |
Design of Prestressed Concrete Cylinder Pipe |
| ANSI/AWWA C 400-1993 |
水及其他液体用4到6英寸的石棉水泥配给管 |
Asbestos-Cement Distribution Pipe, 4 in through 16 in, for Water and Other Liquids |
| ANSI/AWWA C 401-1993 |
给水系统用4到6英寸(100mm到400mm)的石棉水泥压力管的选择 |
Selection of Asbestos-Cement Pressure Pipe, 4-in through 16-in (100-mm through 400-mm) for Water Distribution Systems |
| ANSI/AWWA C 402-2000 |
给水站用石棉水泥传输管18 英寸至 42 英寸 (450 mm 至 1,050 mm) |
Asbestos-Cement Transmission Pipe, 18 in through 42 in (450 mm through 1,050 mm), for Water Supply Service |
| ANSI/AWWA C 403-2000 |
给水站用石棉水泥传输供水主管18 英寸至 42 英寸 (450 mm 至 1,050 mm)的选择 |
Selection of Asbestos-Cement Transmission and Feeder Main Pipe, Sizes 18 in through 42 in (450 mm through 1050 mm), Practice for the |
| ANSI/AWWA C 500-1993 |
水和排水系统的滑门阀 |
Gate Valves for Water and Sewage Systems |
| ANSI/AWWA C 502-1994 |
干桶式防火给水栓 |
Hydrants, Dry Barrel Fire |
| ANSI/AWWA C 502a-1994 |
干桶式防火给水栓 |
Hydrants, Dry Barrel Fire |
| ANSI/AWWA C 504-1994 |
橡胶垫密封蝶阀 |
Rubber-Seated Butterfly Valves |
| ANSI/AWWA C 508-2001 |
2in(50mm)-24in(600mm)NPS水厂设备用摆动止回阀 |
Swing-Check Valves for Waterworks Service, 2 in (50 mm) through 24 in (600 mm) NPS |
| ANSI/AWWA C 509-2001 |
给水用弹性带座闸阀 |
Resilient-Seated Gate Valves for Water Supply Service |
| ANSI/AWWA C 513-1997 |
明渠.预制金属滑动门 |
Open Channel, Fabricated-Metal Slide Gates |
| ANSI/AWWA C 540-1993 |
阀门和水闸门用机动装置 |
Power-Actuating Devices for Valves and Sluice Gates |
| ANSI/AWWA C 560-2001 |
铸铁水闸 |
Cast-Iron Sluice Gates |
| ANSI/AWWA C 602-2000 |
4英寸及更大的现场用输水管道的水泥砂浆衬 |
Cement-Mortar Lining of Water Pipelines in Place - 4 in (100 mm) and Larger |
| ANSI/AWWA C 603-1996 |
石棉水泥压力管的安装 |
Installation of Asbestos-Cement Pressure Pipe |
| ANSI/AWWA C 605-1994 |
水处理.聚氯乙烯压力水管和配件的地下安装 |
Water Treatment - Underground Installation of Polyvinyl Chloride PVC Pressure Pipe and Fittings for Water |
| ANSI/AWWA C 652-1992 |
存水设备的消毒 |
Disinfection of Water-Storage Facilities |
| ANSI/AWWA C 653-1997 |
水处理设备的消毒 |
Disinfection of Water Treatment Plants |
| ANSI/AWWA C 654-1997 |
井的消毒 |
Disinfection of Wells |
| ANSI/AWWA C 700-1995 |
冷水表.位移型青铜外壳体 |
Cold-Water Meters - Displacement Type, Bronze Main Case |
| ANSI/AWWA C 702-2001 |
复合型冷水表 |
Cold Water Meters - Compound Type |
| ANSI/AWWA C 703-1996 |
防火型冷水表 |
Cold Water Meters - Fire Service Type |
| ANSI/AWWA C 704-1970 |
主管线用旋桨式冷水表 |
Cold-Water Meters - Propeller Type for Main Line Applications |
| ANSI/AWWA C 706-1996 |
冷水表用直接读取的遥控读数系统 |
Direct-Reading Remote-Registration Systems for Cold-Water Meters |
| ANSI/AWWA C 707-1982 |
冷水表用编码器式遥控读数系统 |
Water Meters, Encoder-Type, Remote-Registration Systems for Cold |
| ANSI/AWWA C 708-1996 |
多喷嘴式冷水表 |
Cold-Water Meters - Multijet Type |
| ANSI/AWWA C 708a-1997 |
冷水表.多喷水口型 |
Cold-Water Meters - Multijet Type |
| ANSI/AWWA C 710-1995 |
冷水表.位移型.塑料外壳体 |
Cold Water Meters - Displacement Type - Plastic Main Case |
| ANSI/AWWA C 712-2002 |
冷水表.单头喷射型 |
Cold-Water Meters - Singlejet Type |
| ANSI/AWWA C 800-2001 |
地下管道阀门和配件 |
Underground Service Line Valves and Fittings |
| ANSI/AWWA C 901-1996 |
给水用1/2到3英寸(13-76毫米)聚乙烯压力管 |
Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in (13 mm) through 3 in (76 mm), for Water Service |
| ANSI/AWWA C 906-1999 |
配水用聚乙烯压力管和配件,4英寸至63英寸 |
Polyethylene (PE) Pressure Pipe and Fittings, 4 in through 63 in for Water Distribution |
| ANSI/AWWA C 908-1997 |
聚氯乙烯管用聚氯乙烯自攻T字接头 |
PVC Self-Tapping Saddle Tees for Use on PVC Pipe |
| ANSI/AWWA C 950-2001 |
玻璃纤维压力管 |
Fiberglass Pressure Pipe |
| ANSI/AWWA C104/A 21.4-2004 |
球墨铸铁水管和配件用水泥砂浆衬 |
|
| ANSI/AWWA C104/A 21.4-2004 |
球墨铸铁水管和配件用水泥砂浆衬 |
(Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ) |
| ANSI/AWWA C110/A 21.10-2003 |
水和其它液体用球墨铸铁和灰口铁配件3-48英寸(75mm-1200mm) |
(Ductile-Iron and Gray-Iron Fittings, 3 in through 48 in (75 mm through 1200 mm), for Water and Other Liquids ) |
| ANSI/AWWA C116/A 21.16-2003 |
给水设备用球墨铸铁和灰铁配件的内外表面的防护熔融胶合环氧涂层 |
(Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service ) |
| ANSI/AWWA C213a-2002 |
钢制水管内外熔融胶合环氧树脂涂层 |
(Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines ) |
| ANSI/AWWA C215-2004 |
钢制水管的外层用挤压聚烯烃涂层 |
|
| ANSI/AWWA C218-2002 |
地面钢制供水管道和配件外部的涂覆 |
(Coating the Exterior of Aboveground Steel Water Pipelines and Fittings ) |
| ANSI/AWWA C223-2002 |
结构钢和不锈钢开口套管 |
(Fabricated Steel and Stainless Steel Tapping Sleeves ) |
| ANSI/AWWA C225-2002 |
钢制水管外层用溶解的聚烯烃涂覆系统 |
(Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines ) |
| ANSI/AWWA C300-2004 |
水及其他液体用钢制圆柱形加筋混凝土压力管 |
|
| ANSI/AWWA C302-2004 |
非圆柱形钢筋混凝土压力管 |
|
| ANSI/AWWA C303-2002 |
钢制圆柱形条绕的混凝土压力管 |
(Concrete Pressure Pipe, Bar-Wrapped, Steel Cylinder Type ) |
| ANSI/AWWA C401-2003 |
配水系统用4到16英寸(100mm到400mm)的石棉水泥压力管的选择 |
(Selection of Asbestos-Cement Pressure Pipe, 4-in through 16-in (100-mm through 400-mm) for Water Distribution Systems ) |
| ANSI/AWWA C500-2002 |
水和排水系统的滑门阀 |
(Gate Valves for Water and Sewage Systems ) |
| ANSI/AWWA C503-2005 |
湿筒消防栓 |
|
| ANSI/AWWA C507-2005 |
从6英寸(150mm)到48英寸(1200mm)的球阀 |
|
| ANSI/AWWA C512-2004 |
给水装置用放气阀、空气/真空和混合空气阀 |
|
| ANSI/AWWA C513-2005 |
明渠预制金属滑动闸门和明渠预制金属溢流堰闸门 |
|
| ANSI/AWWA C540-2002 |
阀门和水闸门用机动装置 |
(Power-Actuating Devices for Valves and Sluice Gates ) |
| ANSI/AWWA C550-2005 |
阀门和给水栓用防护性内部涂层 |
|
| ANSI/AWWA C561-2004 |
装配式不锈钢推拉门的AWWA标准 |
|
| ANSI/AWWA C561-2004 |
装配式不锈钢推拉门的AWWA标准 |
(AWWA Standard for Fabricated Stainless Steel Slide Gates ) |
| ANSI/AWWA C563-2004 |
预制合成滑动门 |
|
| ANSI/AWWA C606-2004 |
带槽和带肩的接头 |
|
| ANSI/AWWA C651-2005 |
消毒总水管 |
|
| ANSI/AWWA C653-2002 |
水处理设备的消毒 |
(Disinfection of Water Treatment Plants ) |
| ANSI/AWWA C654-2003 |
井的消毒 |
(Disinfection of Wells ) |
| ANSI/AWWA C700-2002 |
位移型青铜外壳体冷水表 |
(Cold-Water Meters - Displacement Type, Bronze Main Case ) |
| ANSI/AWWA C701-2002 |
用户用涡轮式冷水表 |
(Cold Water Meters - Turbine Type for Customer Service ) |
| ANSI/AWWA C704-2002 |
主管线用旋桨式冷水表 |
(Cold-Water Meters - Propeller Type for Main Line Applications ) |
| ANSI/AWWA C707-2005 |
冷水表用编码器式遥控读数系统 |
|
| ANSI/AWWA C708-2005 |
多喷嘴式冷水表 |
|
| ANSI/AWWA C710-2002 |
位移型.塑料外壳体冷水表 |
(Cold Water Meters - Displacement Type - Plastic Main Case ) |
| ANSI/AWWA C712-2002 |
冷水表.单头喷射型 |
(Cold-Water Meters - Singlejet Type ) |
| ANSI/AWWA C713-2005 |
冷水表.射流振荡器型 |
|
| ANSI/AWWA C750-2003 |
全闭路导管中渡越时间流量计 |
(Transit-Time Flowmeters in Full Closed Conduits ) |
| ANSI/AWWA C800-2005 |
地下管道阀门和配件 |
|
| ANSI/AWWA C901-2002 |
给水用1/2到3英寸(13-76毫米)聚乙烯压力管 |
(Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in (13 mm) through 3 in (76 mm), for Water Service ) |
| ANSI/AWWA C903-2005 |
给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管 |
|
| ANSI/AWWA D 100-1996 |
储水用钢制焊接箱 |
Welded Steel Tanks for Water Storage |
| ANSI/AWWA D 102-1997 |
有涂层的钢制储水箱 |
Coating Steel Water - Storage Tanks |
| ANSI/AWWA D 104-1997 |
自动控制的钢制水箱内部的外加电流阴极保护 |
Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks |
| ANSI/AWWA D 110-1995 |
绕组环形预应力混凝土水箱 |
Wire-Wound, Circular Prestressed Concrete Water Tanks |
| ANSI/AWWA D 110a-1996 |
金属丝和金属丝绳缠绕的环形预应力混凝土 |
Wire- and Strand-Wound Circular-Prestressed Concrete |
| ANSI/AWWA D 115-1995 |
带有环形预应力钢筋的环形预应力混凝土水箱标准 |
Standard for Circular Prestressed Concrete Water Tanks with Circumferential Tendons |
| ANSI/AWWA D 130-1996 |
便携式储水用柔性薄膜衬和浮动式盖材料 |
Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage |
| ANSI/AWWA D102-2003 |
有涂层的钢制储水箱 |
(Coating Steel Water - Storage Tanks ) |
| ANSI/AWWA D120-2002 |
热固玻璃增强纤维塑料水箱 |
(Thermosetting Fiberglass-Reinforced Plastic Tanks ) |
| ANSI/AWWA D130-2002 |
便携式储水装置用柔性薄膜衬和浮动式盖材料 |
(Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage ) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com