标准号 |
中文名称 |
英文名称 |
ANSI/ASME B 18.18.6M-1998 |
由第三方认可系统提供的紧固件质量保证规划 |
Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System |
ANSI/ASME B 18.18.7M-1998 |
用户验收控制规划中提供的紧固件的质量保证规划 |
Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan |
ANSI/ASME B 18.2.1-1996 |
四方和六角形螺栓和螺钉(英寸系列) |
Square and Hex Bolts and Screws (Inch Series) |
ANSI/ASME B 18.2.2-1987 |
英制系列四角和六角螺帽 |
Square and Hex Nuts (Inch Series) |
ANSI/ASME B 18.2.3.10M-1996 |
四方头螺栓(米制系列) |
Square Head Bolts (Metric Series) |
ANSI/ASME B 18.2.3.1M-1979 |
螺钉,米制六角型螺帽 |
Screws, Metric Hex Cap |
ANSI/ASME B 18.2.3.2M-1979 |
螺钉,米制六角型 |
Screws, Metric Formed Hex |
ANSI/ASME B 18.2.3.3M-1979 |
螺钉, 米制重六角型 |
Screws, Metric Heavy Hex |
ANSI/ASME B 18.2.3.4M-1984 |
米制六角头法兰螺钉 |
Screws, Metric Hex Flange |
ANSI/ASME B 18.2.3.5M-1979 |
螺栓, 米制六角型 |
Bolts, Metric Hex |
ANSI/ASME B 18.2.3.6M-1979 |
螺栓, 米制重六角型 |
Bolts, Metric Heavy Hex |
ANSI/ASME B 18.2.3.7M-1979 |
螺栓, 米制重六角型结构 |
Bolts, Metric Heavy Hex Structural |
ANSI/ASME B 18.2.3.9M-1984 |
米制加重六角头带法兰螺钉 |
Metric Heavy Hex Flange Screws |
ANSI/ASME B 18.2.4.1M-2002 |
1型米制六角螺母 |
Hex Nuts, Style 1, Metric |
ANSI/ASME B 18.2.4.2M-1979 |
六角型螺母,2型,米制 |
Hex Nuts, Style 2, Metric |
ANSI/ASME B 18.2.4.3M-1979 |
六角型螺母,有槽缝,米制 |
Hex Nuts, Slotted, Metric |
ANSI/ASME B 18.2.4.5M-1979 |
六角卡住螺母,米制 |
Hex Jam Nuts, Metric |
ANSI/ASME B 18.2.4.6M-1979 |
重型六角螺母,米制 |
Hex Nuts, Heavy, Metric |
ANSI/ASME B 18.2.6-1996 |
结构应用中使用的固定器 |
Fasteners for Use in Structural Applications |
ANSI/ASME B 18.2.7.1M-2002 |
米制12-花键法兰螺钉 |
Metric 12-Spline Flange Screws |
ANSI/ASME B 18.21.1-1994 |
锁紧垫圈(英寸系列) |
Lock Washers (Inch Series) |
ANSI/ASME B 18.21.2M-1994 |
锁紧垫圈(米制系列) |
Lock Washers (Metric Series) |
ANSI/ASME B 18.22.1-1965 |
水平垫圈 |
Plain Washers |
ANSI/ASME B 18.24.1-1996 |
B18外螺纹产品部分鉴定(PIN)编码系统标准 |
Part Identifying Number (PIN) Code System Standard for B18 Externally Threaded Products |
ANSI/ASME B 18.24.3-1998 |
B18非螺纹产品部分识别数字编码系统 |
Part Identifying Number (PIN) Code System Standard for B18 Non-Threaded Products |
ANSI/ASME B 18.25.1M-1996 |
四方型和矩型键和键槽 |
Square and Rectangular Keys and Keyways |
ANSI/ASME B 18.25.2M-1996 |
半圆键和键槽 |
Woodruff Keys & Keyways |
ANSI/ASME B 18.25.3M-1998 |
四方形和矩形键和键槽.宽度公差和大于基本尺寸的变化 |
Square and Rectangular Keys and Keyways - Width Tolerances and Deviations Greater than Basic Size |
ANSI/ASME B 18.27.1-1998 |
锥形渐减交叉档圈(英寸系列) |
Tapered and Reduced Cross Section Retaining Rings (Inch Series) (External Type - NA1; Internal Type - NA2; E-Ring Type - NA3) |
ANSI/ASME B 18.27.2-1998 |
锥形渐减交叉外档圈(英寸系列) |
Tapered and Reduced Cross Section External Retaining Rings (Inch Series) (Heavy Duty External - NA4; Reinforced E Rings - NA5; C Type Rings - NA6) |
ANSI/ASME B 18.27.3-1998 |
锥形渐减交叉外档圈(英寸系列) |
Tapered and Reduced Cross Section Retaining Rings (Inch Series) (Bowed External-NA7; Bowed Internal-NA8; Bowed External E-NA9) |
ANSI/ASME B 18.29.1-1993 |
空转的和螺钉锁定的英制螺旋线圈螺钉用螺纹垫片 |
Helical Coil Screw Thread Inserts - Free Running and Screw Locking (Inch Series) |
ANSI/ASME B 18.3-1998 |
六角键和花键圆柱头有肩定位螺钉 |
Socket Cap, Shoulder, and Set Screws (Inch Series) |
ANSI/ASME B 18.3.1M-1986 |
米制系列内六角螺钉 |
Screws, Socket Head Cap (Metric Series) |
ANSI/ASME B 18.3.2M-1979 |
六角钻头(米制系列) |
Keys and Bits, Hexagon (Metric Series) |
ANSI/ASME B 18.3.3M-1986 |
米制系列内六角轴肩螺钉 |
Hexagon Socket Head Shoulder Screws (Metric Series) |
ANSI/ASME B 18.3.4M-1986 |
米制系列内六角圆头螺钉 |
Screws, Hexagon Socket Button Head Cap (Metric Series) |
ANSI/ASME B 18.3.5M-1986 |
米制系列内六角扁平沉头螺钉 |
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series) |
ANSI/ASME B 18.3.6M-1986 |
米制系列内六角紧定螺钉 |
Screws, Hexagon Socket Set (Metric Series) |
ANSI/ASME B 18.5-1990 |
园头螺栓(英寸系列) |
Round Head Bolts (Inch Series) |
ANSI/ASME B 18.5.2.1M-1996 |
螺栓,米制园头短四方杆 |
Bolts, Metric Round Head Short Square Neck |
ANSI/ASME B 18.5.2.2M-1982 |
米制圆头方颈螺栓 |
Bolts, Metric Round Head Square Neck |
ANSI/ASME B 18.5.2.3M-1990 |
米制大圆头方颈螺栓 |
Round Head Square Neck Bolts With Large Head (Metric) |
ANSI/ASME B 18.6.1-1981 |
木螺丝(英寸系列) |
Wood Screws (Inch Series) |
ANSI/ASME B 18.6.2-1995 |
槽缝头帽螺钉,四角型头配套螺钉,和槽缝非头状配套螺钉 |
Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws |
ANSI/ASME B 18.6.3-1972 |
有狭槽和凹口头的机床螺钉和螺母 |
Slotted and Recessed Head Machine Screws and Machine Screw Nuts |
ANSI/ASME B 18.6.4-1998 |
成型或切割形成螺纹的螺钉,攻丝金属,英寸系列 |
Screws, Tapping and Metallic Drive, Inch Series, Thread Forming and Cutting |
ANSI/ASME B 18.6.5M-1986 |
米制自攻螺钉和攻丝自攻螺钉 |
Metric Thread Forming and Thread Cutting Tapping Screws |
ANSI/ASME B 18.6.7M-1985 |
米制机用螺钉 |
Metric Machine Screws |
ANSI/ASME B 18.7-1972 |
半管形铆钉,全管型铆钉,分裂式铆钉和铆钉帽,一般目的 |
Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps, General Purpose |
ANSI/ASME B 18.7.1M-1984 |
米制通用半管形铆钉 |
Rivets, Metric General Purpose Semi-Tubular |
ANSI/ASME B 18.8.1-1994 |
U形夹销和开尾销(英寸系列) |
Clevis Pins and Cotter Pins (Inch Series) |
ANSI/ASME B 18.8.2-1995 |
锥形销、定位销、直销、有槽销和弹簧销(英制系列) |
Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series) |
ANSI/ASME B 18.8.3M-1995 |
米制系列螺旋弹簧销 |
Spring Pins - Coiled Type (Metric Series) |
ANSI/ASME B 18.8.4M-1994 |
有槽弹簧销(米制系列) |
Spring Pins - Slotted (Metric Series) |
ANSI/ASME B 18.8.5M-1994 |
机器榫钉.硬质的(米制系列) |
Machine Dowel Pins - Hardened Ground (Metric Series) |
ANSI/ASME B 18.8.6M-1995 |
米制系列开尾销 |
Cotter Pins, Metric Series |
ANSI/ASME B 18.8.7M-1994 |
无头U形夹销(米制系列) |
Headless Clevis Pins (Metric Series) |
ANSI/ASME B 18.8.8M-1994 |
有夹U形夹销(米制系列) |
Headed Clevis Pins (Metric Series) |
ANSI/ASME B 18.8.9M-1998 |
带槽的销子.米制系列 |
Grooved Pins Metric Series |
ANSI/ASME B 18.9-1996 |
犁头螺栓 |
Plow Bolts (Inch Series) |
ANSI/ASME B 19.1-1995 |
空气压缩机系统的安全标准 |
Safety Standard for Air Compressor Systems |
ANSI/ASME B 19.3-1991 |
加工工业用压缩机的安全标准 |
Safety Standard for Compressors for Process Industries |
ANSI/ASME B 20.1-1996 |
输送机及其相关设备的安全标准 |
Safety Standard for Conveyors and Related Equipment |
ANSI/ASME B 29.10M-1997 |
重型旁置外链片传动链和链齿 |
Heavy Duty Offset Sidebar Transmission Roller Chains and Sprocket Teeth |
ANSI/ASME B 29.11M-1994 |
组合链、附件及链齿 |
Combination Chains, Attachments, and Sprocket Teeth |
ANSI/ASME B 29.12M-1997 |
钢套筒无滚子链、附件及链齿 |
Steel Bushed Rollerless Chains, Attachments, and Sprocket Teeth |
ANSI/ASME B 29.14M-1996 |
H型碾磨链、附件及链齿 |
H Type Mill Chains, Attachments, and Sprocket Teeth |
ANSI/ASME B 29.15M-1997 |
钢辊型传送链、附件和链齿 |
Steel Roller Type Conveyor Chains, Attachments, and Sprocket Teeth |
ANSI/ASME B 29.17M-1983 |
绞接式平顶输送机链和链齿 |
Hinge Type Flat Top Conveyor Chains and Sprocket Teeth |
ANSI/ASME B 29.19M-1996 |
农用滚子链、附件和链轮 |
Agricultural Roller Chains, Attachments, and Sprockets |
ANSI/ASME B 29.200-2001 |
焊接钢型轧链条.焊接钢牵引链.附件和链轮齿 |
Welded Steel Type Mill Chains, Welded Steel Drag Chains, Attachments and Sprocket Teeth |
ANSI/ASME B 29.21M-1996 |
水、污水处理设备用700级焊接钢和铸造链、附件及链轮 |
700 Class Welded Steel and Cast Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants |
ANSI/ASME B 29.22M-1995 |
锻造的无铆钉链、链齿传动链和传动支架 |
Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs |
ANSI/ASME B 29.23M-1985 |
柔性链联接器 |
Flexible Chain Couplings |
ANSI/ASME B 29.24M-1995 |
高架提升机用滚子载重链 |
Roller Load Chains for Overhead Hoists |
ANSI/ASME B 29.25M-1994 |
开口桶形钢制斜栓节传送链、附件及链轮 |
Open Barrel Steel Pintle-Type Conveyor Chains, Attachments, and Sprockets |
ANSI/ASME B 29.26M-1996 |
动力传动滚子链的疲劳试验 |
Fatigue Testing Power Transmission Roller Chain |
ANSI/ASME B 29.6M-1993 |
钢制活络链、附件和链轮 |
Steel Detachable Link Chains, Attachments, and Sprockets |
ANSI/ASME B 30.1-1998 |
千斤顶 |
Jacks |
ANSI/ASME B 30.10-1993 |
吊钩 |
Hooks |
ANSI/ASME B 30.11-1998 |
单轨起重机和悬挂式桥吊 |
Monorails and Underhung Cranes |
ANSI/ASME B 30.12-2001 |
旋翼机悬吊货物装卸荷载 |
Handling Loads Suspended from Rotorcraft |
ANSI/ASME B 30.13-1996 |
储存和回收(S/R)机械及辅助设备 |
Storage/Retrieval (S/R) Machines and Associated Equipment |
ANSI/ASME B 30.14-1996 |
侧臂式拖拉机的安全标准 |
Safety Standard for Side Boom Tractors |
ANSI/ASME B 30.16-1993 |
高架悬挂提升机 |
Overhead Hoists (Underhung) |
ANSI/ASME B 30.16a-2001 |
悬吊提升机(悬) |
Overhead Hoists (Underhung) |
ANSI/ASME B 30.17-1998 |
高架和龙门起重机(单梁顶行桥架悬挂提升机) |
Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist) |
ANSI/ASME B 30.18-1993 |
堆垛用起重机(多梁顶行或底行桥架悬挂式提升机) |
Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist) |
ANSI/ASME B 30.19-1993 |
索道 |
Cableways |
ANSI/ASME B 30.2-2001 |
高架和龙门起重机(单梁或多梁顶行桥架、顶行起重机) |
Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist) |
ANSI/ASME B 30.20-1993 |
下吊钩提升装置 |
Below-the-Hook Lifting Devices |
ANSI/ASME B 30.20a-2001 |
钩在下提升装置 |
Below-the-Hook Lifting Devices |
ANSI/ASME B 30.21-1994 |
手动操作杆式提升机 |
Manually Lever Operated Hoists |
ANSI/ASME B 30.22-1993 |
活节悬臂起重机 |
Articulating Boom Cranes |
ANSI/ASME B 30.25-1998 |
废料和物料装卸搬运设备 |
Scrap and Material Handlers |
ANSI/ASME B 30.3-1996 |
施工用塔式起重机 |
Construction Tower Cranes |
ANSI/ASME B 30.4-1990 |
龙门座起重机、塔式起重机和转柱起重机 |
Portal, Tower, and Pedestal Cranes |
ANSI/ASME B 30.5-1994 |
汽车起重机和机车起重机 |
Mobile and Locomotive Cranes |
ANSI/ASME B 30.5a-2002 |
移动式起重机和机车起重机 |
Mobile and Locomotive Cranes |
ANSI/ASME B 30.6-1995 |
桅杆起重机 |
Derricks |
ANSI/ASME B 30.7-1994 |
基座固定卷筒提升机 |
Base Mounted Drum Hoists |
ANSI/ASME B 30.8-1993 |
水上起重机和水上桅杆起重机 |
Floating Cranes and Floating Derricks |
ANSI/ASME B 30.9-1996 |
吊索 |
Slings |
ANSI/ASME B 31.1-2001 |
动力管道 |
Power Piping |
ANSI/ASME B 31.3-2002 |
工艺管道 |
Process Piping |
ANSI/ASME B 31.4-1992 |
烃类、液化石油气、无水氨和醇类用液体输送系统 |
Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia, and Alcohols |
ANSI/ASME B 31.4a-2001 |
液烃和其他液体用管道输送系统 |
Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids |
ANSI/ASME B 31.5-2001 |
制冷管道 |
Refrigeration Piping |
ANSI/ASME B 31.8-1995 |
气体输送和分配管道系统 |
Gas Transmission and Distribution Piping Systems |
ANSI/ASME B 31.8S-2002 |
气体管道的管理系统完整性 |
Managing System Integrity of Gas Pipelines |
ANSI/ASME B 31.9-1996 |
建筑物服务设施用压力管道标准 |
Building Services Piping Code for Pressure Piping |
ANSI/ASME B 31G-1991 |
用于测定受腐蚀管道剩余强度的手册 |
Manual for Determining the Remaining Strength of Corroded Pipelines |
ANSI/ASME B 32.3M-1984 |
板状金属制品的优选米制尺寸 |
Metric Sizes for Flat Metal Products, Preferred |
ANSI/ASME B 32.6M-1984 |
除管道外的管形金属制品与英制尺寸相当的优选米制尺寸 |
Tubular Metal Products Other Than Pipe, Preferred Metric Equivalents of Inch Sizes for |
ANSI/ASME B 36.10M-1996 |
焊接锻钢管和无缝锻钢管 |
Welded and Seamless Wrought Steel Pipe |
ANSI/ASME B 36.19M-1985 |
不锈钢管 |
Stainless Steel Pipe |
ANSI/ASME B 40.1-1991 |
量规.压力刻度指示表.弹性件 |
Gauges - Pressure Indicating Dial Type - Elastic Element |
ANSI/ASME B 40.2-1991 |
隔膜式密封件 |
Diaphragm Seals |
ANSI/ASME B 40.200-2001 |
直接读和远读的量热仪 |
Thermometers, Direct Reading and Remote Reading |