标准号 |
中文名称 |
英文名称 |
ANSI/ASTM D2683-2004 |
限定外径的聚乙烯管用套节型聚乙烯配件规范 |
|
ANSI/ASTM D2699-2003 |
用研究法测定发动机燃料爆燃特性的试验(05.04) |
(Motor Fuels by the Research Method, Test for Knock Characteristics of (05.04) ) |
ANSI/ASTM D2699-2004 |
用研究法测定机动车燃料的抗爆特性 |
|
ANSI/ASTM D2699a-2004 |
火花点燃式发动机燃料的辛烷值研究的试验方法 |
|
ANSI/ASTM D2700-2004 |
火花点火发动机燃料的发动机辛烷值的试验方法 |
|
ANSI/ASTM D2700-2004 |
火花点火发动机燃料的发动机辛烷值的试验方法 |
(Test Method for Motor Octane Number of Spark-ignition Engine Fuel ) |
ANSI/ASTM D2700b-2004 |
火花点燃式发动机燃料的发动机辛烷值的试验方法 |
|
ANSI/ASTM D2729-2003 |
聚氯乙烯(PVC)污水管及配件规范 |
(Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings ) |
ANSI/ASTM D2737-2003 |
聚乙烯塑料管规范 |
(Specification for Polyethylene (PE) Plastic Tubing ) |
ANSI/ASTM D2749-2002 |
塑料管配件的尺寸表示符号 |
(Symbols for Dimensions of Plastic Pipe Fittings ) |
ANSI/ASTM D2756-2002 |
电绝缘清漆重量损失的测试方法 |
(Test Method for Weight Loss of Electrical Insulating Varnishes ) |
ANSI/ASTM D2782-2002 |
润滑液耐特压特性的测量方法(泰姆肯试验方法)(05.02) |
(Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method), Method for (05.02) ) |
ANSI/ASTM D2783-2003 |
润滑液极压特性测量的试验方法(四球法) |
(Test Method for Measurement of Extreme-pressure Properties of Lubricating Fluids Four-ball Method ) |
ANSI/ASTM D2837-2004 |
获得热塑性管道材料静水压设计基数的试验方法 |
|
ANSI/ASTM D2859-2002 |
加工的织物地板覆盖物材料的燃烧特性试验方法 |
(Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials ) |
ANSI/ASTM D2859-2004 |
精制纺织地板覆盖物着火特性试验方法 |
|
ANSI/ASTM D2880-2003 |
燃气轮机燃料油规范(05.02) |
(Gas Turbine Fuel Oils, Specification for (05.02) ) |
ANSI/ASTM D2881-2003 |
金属加工液和相关材料的分类(05.02) |
(Classification of Metal Working Fluids and Related Materials ) |
ANSI/ASTM D2885-2003 |
使用在线分析仪测定辛烷值的研究法和马达法(05.04) |
(Research and Motor Method Octane Ratings Using On-Line Analyzers, Test Method for (05.04) ) |
ANSI/ASTM D2887-2004 |
用气相色谱法测定石油馏分沸腾范围分布的试验方法 |
(Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography ) |
ANSI/ASTM D2887b-2004 |
气相色谱法测定石油馏份的沸腾范围分布的试验方法 |
|
ANSI/ASTM D2892-2004 |
原油的蒸馏方法(15理论板柱)(05.02) |
|
ANSI/ASTM D2892-2004 |
原油的蒸馏方法(15理论板柱)(05.02) |
(Distillation of Crude Petroleum (15 Theoretical Plate Column), Method for (05.02) ) |
ANSI/ASTM D2893-2003 |
极压润滑油氧化特性的试验方法 |
(Test Method for Oxidation Characteristics of Extreme Pressure Lubricating Oils ) |
ANSI/ASTM D2893-2004 |
超高压润滑油的氧化特性的试验方法 |
|
ANSI/ASTM D2896-2004 |
用电势高氯酸滴定法测定石油产品总碱值的试验方法(05.02) |
|
ANSI/ASTM D2896-2004 |
用电势高氯酸滴定法测定石油产品总碱值的试验方法(05.02) |
(Total Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration, Test Method for (05.02) ) |
ANSI/ASTM D2903-2003 |
电绝缘用交链氯化聚烯烃热缩管规范 |
(Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation ) |
ANSI/ASTM D2972-2003 |
水中砷测定方法 |
(Test Methods for Arsenic in Water ) |
ANSI/ASTM D2983-2004 |
用Brookfield粘度计测定机动车试验液体润滑剂的低温粘度的试验方法 |
|
ANSI/ASTM D2983a-2002 |
用布鲁克非尔德度粘度计测量机动车液体润滑剂低温粘度的试验方法 |
(Low-Temperature Viscosity of Automotive Test Fluid Lubricants Measured by Brookfield Viscometer, Method of Test for (05.02) ) |
ANSI/ASTM D2989-2002 |
卤化有机溶剂及其添加剂的酸碱性的试验方法 |
(Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and their Admixtures ) |
ANSI/ASTM D3004-2002 |
挤压热固和热塑性半导体和绝缘护套规范(10.02) |
(Specification for Extruded Thermosetting and Thermoplastic Semi-Conducting Conductor and Insulation Shields (10.02) ) |
ANSI/ASTM D3016-2003 |
液体排组色谱法术语和关联的使用的实施规程 |
(Practice for Use of Liquid Exclusion Chromatography Terms and Relationships ) |
ANSI/ASTM D3032-2003 |
连接线绝缘的试验方法(10.02) |
(Hookup Wire Insulation, Test Method for (10.02) ) |
ANSI/ASTM D3032-2004 |
连接线绝缘的试验方法 |
|
ANSI/ASTM D3034-2004 |
PSM 型聚氯乙烯排水管材和管件的规范 |
|
ANSI/ASTM D3035-2003 |
以受控外径为基准的聚乙烯塑料管(SPR-PR)规范 |
(Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter ) |
ANSI/ASTM D3082-2003 |
水中硼的试验方法 |
(Test Method for Boron In Water ) |
ANSI/ASTM D3117-2002 |
馏出燃料的蜡的外观点的试验方法(05.02) |
(Test Method for Wax Appearance Point of Distillate Fuels (05.02) ) |
ANSI/ASTM D3120a-2003 |
用氧化微库仑分析法测定轻质液态石油烃类中硫的痕量的试验方法 |
(Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry, Method of Test for (05.02) ) |
ANSI/ASTM D3138-2002 |
丙烯腈-丁二烯-苯乙烯共聚物管及配件和聚氯乙烯无压管道系统构件之间转换接头用溶剂粘结剂规范 |
(Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components ) |
ANSI/ASTM D3138-2004 |
丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液状粘固剂规范 |
|
ANSI/ASTM D3138-2004 |
丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液状粘固剂规范 |
|
ANSI/ASTM D3223-2002 |
水中整体水银试验方法 |
(Test Method for Total Mercury in Water ) |
ANSI/ASTM D3227-2004 |
汽油、煤油、航空涡轮和馏出燃料中硫醇含量的试验方法(电势滴定法) |
|
ANSI/ASTM D3228-2004 |
用改良的基耶达法测定润滑油中总氮量的试验方法(05.02) |
|
ANSI/ASTM D3228-2004 |
用改良的基耶达法测定润滑油中总氮量的试验方法(05.02) |
(Total Nitrogen in Lubricating Oils by Modified Kjeldahl Method, Method of Test for (05.02) ) |
ANSI/ASTM D3230-2005 |
电势滴定法测定原油中盐的试验方法 |
|
ANSI/ASTM D3231-2002 |
测定汽油中磷的试验方法(05.02) |
(Phosphorus in Gasoline, Method of Test for (05.02) ) |
ANSI/ASTM D3235-2002 |
石蜡中溶剂萃取物,(05.02)的试验方法 |
(Solvent Extractables in Petroleum Waxes, Method of Test for (05.02) ) |
ANSI/ASTM D3237-2002 |
用原子吸收光谱测定法测定汽油中铅含量的试验方法(05.02) |
(Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02) ) |
ANSI/ASTM D3241-2004 |
测定航空涡轮燃料热氧化稳定性的试验方法(JFTOT程序) |
|
ANSI/ASTM D3241-2005 |
测定航空涡轮机燃料热氧化稳定性的试验方法(JFTOT程序) |
|
ANSI/ASTM D3241a-2002 |
航空燃气涡轮机燃料热氧化稳定性的试验方法(JFTOT程序) |
(Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) (05.02) ) |
ANSI/ASTM D3245-2003 |
工业燃料油可泵性的试验方法(05.02) |
(Test Method for Pumpability of Industrial Fuel Oils (05.02) ) |
ANSI/ASTM D3251-2004 |
薄膜绝缘磁性金属丝用电绝缘清漆的热老化特性的试验方法 |
|
ANSI/ASTM D3262-2003 |
增强塑料砂浆污水管规范 |
(Specification for Reinforced Plastic Mortar Sewer Pipe (08.04) ) |
ANSI/ASTM D3262-2004 |
增强塑料砂浆排污水管规范 |
|
ANSI/ASTM D3263-2003 |
除去水成沉积物用溶剂系统腐蚀性的试验方法 |
(Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits ) |
ANSI/ASTM D3288-2003 |
电磁线漆包用漆的试验方法(10.02) |
(Test Methods for Magnet-Wire Enamels (10.02) ) |
ANSI/ASTM D3294-2003 |
聚四氟乙烯树脂模制薄板材和模制基础型材规范 |
(Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes ) |
ANSI/ASTM D3338-2004 |
航空燃料的燃烧热估算方法 |
|
ANSI/ASTM D3339-2002 |
用半微量彩色指示剂滴定法测定酸度总值的试验方法(05.02) |
(Total Acid Number by Semi-Micro Color Indicator Titration, Method of Test for (05.02) ) |
ANSI/ASTM D3353-2004 |
纤维绝缘磁性金属线的试验方法 |
|
ANSI/ASTM D3380-2003 |
塑料片基微波电路基片的相对透电率(介电常数)和耗散因数的试验方法 |
(Test Method for Relative Permittivity (dielectric Constant) and Dissipation Factor of Plastic-based Microwave Circuit Substrates ) |
ANSI/ASTM D341-2004 |
粘度.液态石油产品的温度图 |
|
ANSI/ASTM D3427-2004 |
石油气泡分离时间的试验方法(05.02) |
|
ANSI/ASTM D3427-2004 |
石油气泡分离时间的试验方法(05.02) |
(Gas Bubble Separation Time of Petroleum Oils, Test Method for (05.02) ) |
ANSI/ASTM D3485-2002 |
预先装配导线和电缆用可盘旋光滑壁聚乙烯导管规范 |
(Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable ) |
ANSI/ASTM D3517-2003 |
“纤维玻璃“(玻璃纤维增强热固性树脂)规范 |
(Specification for “Fiberglass“ (Glass-Fiber-Reinforced Thermosetting Resin)(08.04)) |
ANSI/ASTM D3517-2004 |
纤维玻璃(玻璃纤维增强热固性树脂)规范 |
|
ANSI/ASTM D3520-2004 |
热处理液体淬火时间的试验方法.磁性冷却速度试验器法 |
|
ANSI/ASTM D3527-2002 |
机动车轮轴承润滑脂的寿命性能的试验方法(05.02) |
(Test Method for Life Performance of Automotive Wheel Bearing Greases ) |
ANSI/ASTM D3557-2002 |
水中镉试验方法 |
(Test Methods for Cadmium in Water ) |
ANSI/ASTM D3559-2003 |
水中铅的试验方法 |
(Test Methods for Lead in Water ) |
ANSI/ASTM D3561-2002 |
用离子吸收光谱法测试微咸水、海水和盐水中的锂、钾和钠离子的方法 |
(Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry ) |
ANSI/ASTM D3590-2002 |
水中克耶达(Kjeldahl)氮总含量的试验方法 |
(Test Methods for Total Kjeldahl Nitrogen in Water ) |
ANSI/ASTM D3645-2003 |
水中铍的试验方法 |
(Test Methods for Beryllium in Water ) |
ANSI/ASTM D3648-2003 |
放射性测量规程 |
(Practices for the Measurement of Radioactivity ) |
ANSI/ASTM D3651-2002 |
微咸水、海水和盐水中的钡离子的测试方法 |
(Test Method for Barium in Brackish Water, Seawater, and Brines ) |
ANSI/ASTM D3664-2004 |
电气设备中电容器用双轴取向的聚乙烯对苯二酸脂薄膜规范 |
|
ANSI/ASTM D3679-2003 |
硬质聚氯乙烯挡板规范 |
(Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding (08.04) ) |
ANSI/ASTM D3679-2004 |
硬质聚氯乙烯挡板规范 |
|
ANSI/ASTM D3699-2003 |
煤油规范(05.02) |
(Specification for Kerosine ) |
ANSI/ASTM D3699-2005 |
煤油规范 |
|
ANSI/ASTM D3712-2005 |
用液相色谱法分析油溶性石油硫酸盐的试验方法 |
|
ANSI/ASTM D3753-2005 |
玻璃纤维增强聚酯检查孔规范 |
|
ANSI/ASTM D3754-2003 |
纤维玻璃污水管和工业用压力管规范(08.04) |
(Specification for Fiberglass Sewer and Industrial Pressure Pipe (08.04) ) |
ANSI/ASTM D3754-2004 |
纤维玻璃污水管和工业用压力管规范 |
|
ANSI/ASTM D381-2003 |
用射流蒸发法测定燃料中原在胶的试验方法 |
(Existent Gum in Fuels by Jet Evaporation, Method of Test for (05.01) ) |
ANSI/ASTM D3828-2002 |
用Setaflash闭合试验机测定闪点的试验(05.02) |
(Flash Point by Setaflash Closed Tester, Test for (05.02) ) |
ANSI/ASTM D3828-2005 |
用小型闭杯试验器测定闪点的试验方法 |
|
ANSI/ASTM D3829-2002 |
机油的边界泵送温度的预测试验(05.02) |
(Predicting the Borderline Pumping Temperature of Engine Oil, Test for (05.02) ) |
ANSI/ASTM D3839-2002 |
柔性增强热固性树脂管和增强塑料砂浆管的地下安装惯例(08.04) |
(Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04) ) |
ANSI/ASTM D3865-2002 |
水中钚的试验方法 |
(Test Method for Plutonium in Water ) |
ANSI/ASTM D3866-2002 |
水中银的试验方法 |
(Test Methods for Silver in Water ) |
ANSI/ASTM D3867-2004 |
水中亚硝-亚硝测定方法 |
|
ANSI/ASTM D3868-2004 |
微咸水、海水和盐水中氟离子的试验方法 |
|
ANSI/ASTM D3869-2004 |
微咸水、海水和盐水中碘化物和溴化物离子的试验方法 |
|
ANSI/ASTM D3875-2003 |
微咸水、海水和盐水中碱性的试验方法 |
(Test Method for Alkalinity in Brackish Water, Seawater, and Brines ) |
ANSI/ASTM D3919-2004 |
用石墨炉原子吸收光谱法测量水中痕量素的实施规程 |
|
ANSI/ASTM D3948-2004 |
用便携式分离计进行航空涡轮燃料脱水特性的现场试验方法 |
|
ANSI/ASTM D3955-2004 |
电绝缘漆规范 |
|
ANSI/ASTM D396-2005 |
燃料油规范 |
|
ANSI/ASTM D396a-2002 |
燃料油规范 |
(Fuel Oils, Specification for (05.01) ) |
ANSI/ASTM D3972-2002 |
用放射化学法进行水中同位素铀的试验方法 |
(Test Method for Isotopic Uranium in Water by Radiochemistry ) |
ANSI/ASTM D3981-2003 |
通用和包装用中密度聚乙烯薄膜规格 |
(Specification for Medium-density Polyethylene Films for General Use and Packaging Applications ) |
ANSI/ASTM D4000-2003 |
特殊用途塑料材料的分类系统(08.03) |
(Classification System for Specifying Plastic Materials (08.03) ) |
ANSI/ASTM D4007a-2002 |
离心法测定原油中的水和沉积物(实验室法) |
(Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedures) (05.02) ) |
ANSI/ASTM D4045-2004 |
利用加氢分解作用和速率测定比色法测试石油产品中硫的含量 |
|
ANSI/ASTM D4048-2002 |
用铜带生锈试验检测润滑油对铜腐蚀的方法 |
(Method for Detection of Copper Corrosion from Lubricating Grease by the Copper Strip Tarnish Test (05.02) ) |
ANSI/ASTM D4055-2002 |
薄膜过滤法测定戊烷不溶性 |
(Pentane Insolubles by Membrane Filtration (05.02) ) |
ANSI/ASTM D4055-2004 |
薄膜过滤法测定戊烷不溶物 |
|
ANSI/ASTM D4127-2002 |
用于离子选择电极的术语 |
(Terminology Used with Ion-Selective Electrodes ) |
ANSI/ASTM D4171-2004 |
燃料系统防冻剂规范 |
|
ANSI/ASTM D4175-2002 |
石油、石油产品和润滑脂相关术语 |
(Petroleum, Petroleum Products, and Lubricants, Terminology Relating to (05.03) ) |
ANSI/ASTM D4176-2002 |
蒸馏燃料中游离水和粒子污染物的试验方法(清洁和透明通过/停止程序) |
(Test Method for Free Water and Particulate Contamination in Distillate Fuels (Clear and Bright Pass/Fail Proceedings) (05.02) ) |
ANSI/ASTM D4190-2003 |
用直流氩等离子体原子发射光谱法测定水中素的试验方法 |
(Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy ) |
ANSI/ASTM D4191-2003 |
原子吸收分光光度法测定水中钠含量的试验方法 |
(Test Method for Sodium in Water by Atomic Absorption Spectrophotometry ) |