标准号 |
中文名称 |
英文名称 |
ANSI/ASTM A 1018-2001 |
片钢和带钢、重厚度卷材、热轧、高强度低合金结构碳钢以及改良可模塑性高强度钶或钒低合金钢规范 |
Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy With Improved Formability |
ANSI/ASTM A 1020-2001 |
热交换和冷凝用的锅炉,超级加热炉熔焊,碳和碳锰钢管规范 |
Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
ANSI/ASTM A 1022-2001 |
混凝土加筋用刻痕和普通不锈钢丝和焊接钢丝规范 |
Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
ANSI/ASTM A 125-2001 |
热处理螺旋形钢弹簧规范 |
Specification for Steel Springs, Helical, Heat-Treated |
ANSI/ASTM A 131/A 131M-2001 |
船用结构钢规范 |
Specification for Structural Steel for Ships |
ANSI/ASTM A 134-1996 |
电熔(电弧)焊钢管(NPS为16英寸和16英寸以上)的规范 |
Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes Nps 16 and Over) |
ANSI/ASTM A 144-1996 |
钨铁合金规范 |
Specification for Ferrotungsten |
ANSI/ASTM A 167-1999 |
不锈钢和耐热铬镍钢板、薄钢板及带材规范 |
Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
ANSI/ASTM A 183-1998 |
钢轨用碳素钢螺栓和螺母规范 |
Specification for Carbon Steel Track Bolts and Nuts |
ANSI/ASTM A 185-2001 |
普通的混凝土加筋用焊接钢丝网规范 |
Specification for Steel Welded Wire Fabric, Plain, for Concrete Reinforcement |
ANSI/ASTM A 2-1996 |
普通型、带槽和防护型碳素钢平底轨规范 |
Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
ANSI/ASTM A 203-1996 |
压力容器用镍合金钢板规范 |
Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
ANSI/ASTM A 210-1996 |
锅炉和过热器用无缝中碳素钢管规范 |
Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
ANSI/ASTM A 214-1996 |
热交换器与冷凝器用电阻焊接碳素钢管规范 |
Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
ANSI/ASTM A 226-1996 |
高压锅炉与过热器用电阻焊接碳素钢管规范 |
Specification for Electric-Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure Service |
ANSI/ASTM A 227/A 227M-1999 |
机械弹簧用冷拉钢丝规范 |
Specification for Steel Wire, Cold-Drawn for Mechanical Springs |
ANSI/ASTM A 229-1996 |
机械弹簧用油回火钢丝规范 |
Specification for Steel Wire, Oil-Tempered for Mechanical Springs |
ANSI/ASTM A 230-1996 |
阀门用油回火优质碳素弹簧钢丝规范 |
Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
ANSI/ASTM A 231-1996 |
铬钒合金钢弹簧丝规范 |
Specification for Chromium-Vanadium Alloy Steel Spring Wire |
ANSI/ASTM A 232/A 232M-1999 |
阀弹簧络-钒合金钢丝的规范 |
Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
ANSI/ASTM A 252-1998 |
焊接钢和无缝钢管桩规范 |
Specification for Welded and Seamless Steel Pipe Piles |
ANSI/ASTM A 254-1996 |
铜焊钢管规范 |
Specification for Copper-Brazed Steel Tubing |
ANSI/ASTM A 29-1996 |
热锻及冷加工碳素钢和合金钢棒一般要求的规范 |
Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for |
ANSI/ASTM A 299-1996 |
压力容器用锰硅碳钢板规范 |
Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
ANSI/ASTM A 302-1996 |
压力容器用锰钼和锰钼镍合金钢板规范 |
Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
ANSI/ASTM A 304-1996 |
有端部淬火硬性要求的碳素钢及合金钢棒规范 |
Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
ANSI/ASTM A 314-1996 |
锻造用不锈钢坯及钢棒规范 |
Specification for Stainless Steel Billets and Bars for Forging |
ANSI/ASTM A 321-1996 |
经淬火和回火的碳素钢棒规范 |
Specification for Steel Bars, Carbon, Quenched and Tempered |
ANSI/ASTM A 322-1996 |
标准级合金钢棒规范 |
Specification for Steel Bars, Alloy, Standard Grades |
ANSI/ASTM A 34-2001 |
磁性材料的采购检验和抽样实施规范 |
Practice for Procurement Testing and Sampling of Magnetic Materials |
ANSI/ASTM A 340-2001 |
与磁化试验有关的符号和定义的术语 |
Terminology of Symbols and Definitions Relating to Magnetic Testing |
ANSI/ASTM A 343-1997 |
在电力频率下用瓦特计-安培计-伏特计法和25厘米艾普斯亭(EPSTEIN)机架测定材料交流电磁性能的试验方法 |
Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-Cm Epstein Test Frame |
ANSI/ASTM A 351/A 351M-2000 |
压力容器部件用奥氏体、奥氏体铁铸件规范 |
Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts |
ANSI/ASTM A 370-2001 |
钢制品机械试验的试验方法和定义 |
Test Methods and Definitions for Mechanical Testing of Steel Products |
ANSI/ASTM A 381-1996 |
高压输送系统用金属弧焊钢管规范 |
Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems |
ANSI/ASTM A 383-1996 |
出口及一般工业用未经处理的碳素钢铁路轮轴规范 |
Specification for Axles, Railway, Carbon Steel, Untreated for Export and General Industrial Use |
ANSI/ASTM A 427-1996 |
冷轧和热轧用锻制合金钢辊规范 |
Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
ANSI/ASTM A 450-1996 |
碳素钢管、铁素体合金钢管及奥氏体合金钢管规范 |
Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes |
ANSI/ASTM A 478-1996 |
铬镍不锈钢和耐热钢制的编织钢丝规范 |
Specification for Chromium-Nickel Stainless and Heat-Resisting Steel Weaving and Knitting Wire |
ANSI/ASTM A 496-2001 |
混凝土加筋用刻痕钢丝的规范 |
Specification for Steel Wire, Deformed, for Concrete Reinforcement |
ANSI/ASTM A 497-2001 |
混凝土加筋用刻痕焊接钢丝网规范 |
Specification for Steel Welded Wire Fabric, Deformed, for Concrete Reinforcement |
ANSI/ASTM A 498-1998 |
带整体散热片的无缝和焊接碳钢、铁素体和奥氏体合金钢热交换管规范 |
Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger Tubes with Integralfins |
ANSI/ASTM A 503/A 503M-2001 |
大的锻制曲轴超声检查规范 |
Specification for Ultrasonic Examination of Large Forged Crankshafts |
ANSI/ASTM A 511-1996 |
无缝不锈钢机械管规范 |
Specification for Seamless Stainless Steel Mechanical Tubing |
ANSI/ASTM A 512-1996 |
冷拉对缝焊碳素钢机械管规范 |
Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
ANSI/ASTM A 515-1996 |
中温及高温压力容器用碳素钢板规范 |
Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ANSI/ASTM A 519-1996 |
无缝碳素钢与合金钢机械管规范 |
Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
ANSI/ASTM A 521-1996 |
一般工业用闭式压模钢锻件规范 |
Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
ANSI/ASTM A 523-1996 |
高压管型电缆线路用平端无缝与电阻焊钢管规范 |
Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
ANSI/ASTM A 524-1996 |
常温和低温用无缝碳素钢管规范 |
Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
ANSI/ASTM A 555-1996 |
不锈钢丝和钢条一般要求的规范 |
Specification for General Requirements for Stainless Steel Wire and Wire Rods |
ANSI/ASTM A 556-1996 |
无缝冷拉碳素钢给水加热器管规范 |
Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
ANSI/ASTM A 568/A 568M-2001 |
热轧和冷轧、高强度、低合金碳钢薄板材规范.一般要求 |
Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
ANSI/ASTM A 575-1996 |
商品级碳素钢棒(M级)规范 |
Specification for Steel Bars, Carbon, Merchant Quality, M-Grades |
ANSI/ASTM A 587-1996 |
化学工业用电阻焊低碳钢管规范 |
Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
ANSI/ASTM A 589-1996 |
水井用无缝和焊接碳素钢管规范 |
Specification for Seamless and Welded Carbon Steel Water-Well Pipe |
ANSI/ASTM A 623-2000 |
马口铁产品规范,一般要求 |
Specification for Tin Mill Products, General Requirements |
ANSI/ASTM A 627-1996 |
安全设备用均质不易加工的钢棒规范 |
Specification for Homogeneous Tool-Resisting Steel Bars for Security Applications |
ANSI/ASTM A 629-1996 |
安全设备用不易加工的扁钢棒和型材规范 |
Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications |
ANSI/ASTM A 632-2001 |
一般应用的焊接的和无缝的奥氏体不锈钢规范 |
Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
ANSI/ASTM A 633/A 633M-2001 |
标准化的高强度低合金结构钢板规范 |
Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
ANSI/ASTM A 635/A 635M-2001 |
热轧碳钢薄板、带钢和粗带钢卷规范 |
Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled |
ANSI/ASTM A 645/A 645M-1999 |
压力容器用经特殊处理的5%镍合金钢板规范 |
Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated |
ANSI/ASTM A 660-1996 |
高温用离心铸造碳素钢管规范 |
Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
ANSI/ASTM A 662-1996 |
中温和较低温压力容器用碳锰板规范 |
Specification for Pressure Vessel Plates, Carbon-Manganese, for Moderate and Lower Temperature Service |
ANSI/ASTM A 668-1996 |
一般工业用碳素钢和合金钢锻件规范 |
Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
ANSI/ASTM A 671-1996 |
常温和较低温用电熔焊钢管规范 |
Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
ANSI/ASTM A 672-1996 |
中温高压设备用电熔焊钢管规范 |
Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
ANSI/ASTM A 673-1996 |
结构钢冲击试验的取样程序规范 |
Specification for Sampling Procedure for Impact Testing of Structural Steel |
ANSI/ASTM A 689-1996 |
弹簧用碳素钢及合金钢棒的规范 |
Specification for Carbon and Alloy Steel Bars for Springs |
ANSI/ASTM A 693-1999 |
沉淀硬化不锈钢和耐热钢板、薄板和带材规范 |
Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
ANSI/ASTM A 695-1996 |
流体动力设备专用热锻碳素钢棒规范 |
Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications |
ANSI/ASTM A 698/A 698M-1997 |
在衰减交变磁场中磁屏蔽效果的试验方法 |
Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields |
ANSI/ASTM A 704-1996 |
混凝土加筋用焊接普通钢棒或杆的钢筋网的规范 |
Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
ANSI/ASTM A 711-1996 |
钢锻件坯料规范 |
Specification for Steel Forging Stock |
ANSI/ASTM A 717/A 717M-2001 |
单条样品的表面绝缘耐性的试验方法 |
Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
ANSI/ASTM A 719-1997 |
磁性材料层叠系数的试验方法 |
Test Method for Lamination Factor of Magnetic Materials |
ANSI/ASTM A 720-1997 |
无取向电工钢延展性的试验方法 |
Test Method for Ductility of Nonoriented Electrical Steel |
ANSI/ASTM A 724/A 724M-1999 |
压力容器用调制碳钢钢板规范.用于焊接的分层的压力容器 |
Specification for Pressure Vessel Plates, Carbon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
ANSI/ASTM A 734-1996 |
经淬火和回火的合金钢与高强度低合金钢压力容器板规范 |
Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched and Tempered |
ANSI/ASTM A 735-1999 |
中温和较低温压力容器用低碳锰钼钶合金钢板规范 |
Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
ANSI/ASTM A 737/A 737M-1999 |
压力容器用高强度低合金钢板规范 |
Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
ANSI/ASTM A 749-1996 |
热轧碳素和高强度低合金钢带材一般要求的规范 |
Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
ANSI/ASTM A 750-1996 |
阻挡区域用钢制通风格栅的规范 |
Specification for Steel Air Ventilating Grille Units for Detention Areas |
ANSI/ASTM A 751-1996 |
钢制品化学分析的试验方法、操作和术语 |
Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
ANSI/ASTM A 765/A 765M-2001 |
具有强制性韧度要求的碳钢和低合金钢压力容器部件的锻件规范 |
Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
ANSI/ASTM A 768-1996 |
涡轮机转子及轴用经真空处理的12/T%铬合金钢锻件规范 |
Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
ANSI/ASTM A 773/A 773M-2001 |
D-C电子磁滞曲线记录仪的使用响铃和参数过程的材料的D-C磁化特性的试验方法 |
Test Method for D-C Magnetic Properties of Materials Using Ring and Permeameter Procedures with D-C Electronic Hysteresigraphs |
ANSI/ASTM A 793-1996 |
不锈钢轧制楼板的规范 |
Specification for Rolled Floor Plate, Stainless Steel |
ANSI/ASTM A 794-1996 |
商品级冷轧薄钢板规范(最高含碳量为0.16%-0.25%) |
Specification for Steel, Sheet (Carbon 0.16% Maximum to 0.25% Maximum), Cold-Rolled, Commercial Quality |
ANSI/ASTM A 811-1997 |
粉末冶金技术制造的软磁铁零件规范 |
Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques |
ANSI/ASTM A 812-1996 |
多层焊接压力容器用热轧高强度低合金钢薄板规范 |
Specification for Steel Sheet, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure Vessels |
ANSI/ASTM A 82-2001 |
钢筋混凝土用无节钢丝规范 |
Specification for Steel Wire, Plain, for Concrete Reinforcement |
ANSI/ASTM A 832/A 832M-1999 |
压力容器用铬-钼-钒合金钢板的规范 |
Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
ANSI/ASTM A 833-1996 |
用比较硬度测试仪测量金属材料压痕硬度的实施规范 |
Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
ANSI/ASTM A 837-1996 |
渗碳用合金钢锻件规范 |
Specification for Steel Forgings, Alloy, for Carburizing Applications |
ANSI/ASTM A 838-1997 |
继电器用易切铁素体不锈软磁合金规范 |
Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications |
ANSI/ASTM A 839-1997 |
软磁性磷铁粉末冶金技术零件规范 |
Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications |
ANSI/ASTM A 848/A 848M-2001 |
低碳磁铁规范 |
Specification for Low Carbon Magnetic Iron |
ANSI/ASTM A 851-1996 |
高频感应焊接的未退火奥氏体钢冷凝器管规范 |
Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes |
ANSI/ASTM A 865-1996 |
钢管接头用黑色或镀锌焊接或无缝钢螺纹联接套筒规范 |
Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
ANSI/ASTM A 866-2001 |
防摩擦轴承用中碳钢规范 |
Specification for Medium Carbon Anti-Friction Bearing Steel |
ANSI/ASTM A 873-1996 |
压力容器用铬钼合金钢薄板和带材规范 |
Specification for Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels |
ANSI/ASTM A 880-1996 |
钢、不锈钢及相关合金的检验与检查组织和测试实验室评定准则的标准实施规程 |
Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys |
ANSI/ASTM A 882-1996 |
涂环氧树脂的七股预应力钢丝绳规范 |
Specification for Epoxy Coated Seven-Wire Prestressing Steel Strand |
ANSI/ASTM A 883-2001 |
非金属磁性材料铁磁共振行距和旋磁比率试验方法 |
Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials |
ANSI/ASTM A 889-1997 |
在低感应条件下用万用表法和25厘米艾普斯亭(Epstein)框测定材料交流磁特性的试验方法 |
Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame |
ANSI/ASTM A 900-2001 |
非晶磁性带材叠装系数的测试方法 |
Test Method for Lamination Factor of Amorphous Magnetic Strip |
ANSI/ASTM A 901-1997 |
半成品型非晶形磁芯合金规范 |
Specification for Amorphous Magnetic Core Alloys Semi-Processed Types |
ANSI/ASTM A 906/A 906M-1999 |
架空提升用合金钢链式吊索规范 |
Specification for Alloy Steel Chain Slings for Overhead Lifting |
ANSI/ASTM A 908-1996 |
不锈钢针管规范 |
Specification for Stainless Steel Needle Tubing |
ANSI/ASTM A 914/A 914M-1996 |
符合限制的顶端淬火要求的钢棒规范 |
Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
ANSI/ASTM A 919-1996 |
金属热处理的相关术语 |
Terminology Relating to Heat Treatment of Metals |
ANSI/ASTM A 920-1996 |
具有机械特性的微合金热锻高质量钢棒规范 |
Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
ANSI/ASTM A 921/A 921M-1996 |
特殊质量微量合金热锻钢棒规范.后续热锻件规范 |
Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
ANSI/ASTM A 931-1996 |
金属丝绳和绞线拉伸试验的试验方法 |
Test Method for the Tension Testing of Wire Ropes and Strand |
ANSI/ASTM A 932-2001 |
使用万用表法在电源频率下测试片状试样非晶材料交流电磁特性的试验方法 |
Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens |
ANSI/ASTM A 937/A 937M-2001 |
使用两个相临的试验表面的绝缘涂层的层间电阻测定的试验方法 |
Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces |
ANSI/ASTM A 939-1996 |
圆柱体锻件表面砂心的超声波检验的试验方法 |
Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
ANSI/ASTM A 940-1996 |
涡轮转子用的差温热处理真空处理合金钢锻件规范 |
Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |