标准号 |
中文名称 |
英文名称 |
ANSI/ASTM D 1018-1991 |
石油馏分中氢含量的试验方法 |
Test Method for Hydrogen in Petroleum Fractions (05.01) |
ANSI/ASTM D 1025-1991 |
聚丁二烯中不挥发性残渣的试验方法 |
Test Method for Nonvolatile Residue of Polymerization Grade Butadiene (05.01) |
ANSI/ASTM D 1034-1996 |
氟铬砷酸盐苯酚规范 |
Specification for Fluor-Chrome-Arsenate-Phenol |
ANSI/ASTM D 1035-1996 |
氟铬砷酸盐苯酚化学分析的试验方法 |
Test Methods for Chemical Analysis of Fluor-Chrome-Arsenate-Phenol |
ANSI/ASTM D 1039-1994 |
用作电绝缘的玻璃胶合云母的试验方法 |
Method of Testing Glass-Bonded Mica Used as Electrical Insulation (10.01) |
ANSI/ASTM D 1043-1992 |
用扭力试验方法对塑料作为温度功能的硬度特性的试验方法 |
Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test (08.01) |
ANSI/ASTM D 1045-1995 |
塑料用增塑剂的取样与试验方法(08.01) |
Methods of Sampling and Test Plasticizers used in Plastics (08.01) |
ANSI/ASTM D 1047-1995 |
电线及电缆用聚氯乙烯套管规范(10.01) |
Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable (10.01) |
ANSI/ASTM D 1067-2002 |
水的酸性和碱性试验方法 |
Test Methods for Acidity or Alkalinity of Water |
ANSI/ASTM D 1085-1965 |
石油和石油产品的计量方法 |
Gaging Petroleum and Petroleum Products, Method of (05.01) |
ANSI/ASTM D 1091-1991 |
润滑油和添加剂中磷含量的试验方法 |
Test Methods for Phosphorus in Lubricating Oils and Additives (05.01) |
ANSI/ASTM D 1092-1993 |
润滑脂表观粘度的试验方法 |
Test Method for Apparent Viscosity of Lubricating Greases (05.01) |
ANSI/ASTM D 1093-1985 |
蒸馏残余物或烃液的酸性的试验方法 |
Acidity of Distillation Residues or Hydrocarbon Liquids, Method of Test for (05.01) |
ANSI/ASTM D 1094-1992 |
航空燃料水反应试验方法 |
Water Reaction of Aviation Fuels, Method of Test for (05.01) |
ANSI/ASTM D 1122-1998 |
用液体比重计测量发动机冷却剂及其浓缩物比重的试验方法 |
Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants by the Hydrometer |
ANSI/ASTM D 1123-1999 |
卡尔.费歇尔试剂法测定发动机冷却剂浓缩物中水含量的试验方法 |
Test Method for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
ANSI/ASTM D 1129-2002 |
与水有关的术语 |
Terminology Relating to Water |
ANSI/ASTM D 115-1993 |
电绝缘用清漆的试验方法 |
Test method for Varnishes Used for Electrical Insulation (10.01) |
ANSI/ASTM D 1157-1991 |
轻质烃中抑制剂总含量的试验方法 |
Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons (05.01) |
ANSI/ASTM D 1159-2001 |
用电势滴定法测定石油馏分和商用脂肪族烯烃溴值的试验方法 |
Bromine Number of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration, Test Method for (05.01) |
ANSI/ASTM D 1160-2002 |
石油产品减压蒸馏试验方法 |
Test Method for Distillation of Petroleum Products at Reduced Pressures (05.01) |
ANSI/ASTM D 1203-1994 |
采用活性碳方法对塑料挥发损失的试验方法 |
Test Method for Volatile Loss from Plastics Using Activated Carbon Methods (08.01) |
ANSI/ASTM D 1204-1994 |
非刚性热塑片或膜在升高的温度下线性规格变化的试验方法 |
Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature (08.01) |
ANSI/ASTM D 1217-1993 |
采用宾汉比重瓶对液体密度和比重的试验方法 |
Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer (05.01) |
ANSI/ASTM D 1218-1992 |
液态烃折射率和折射色散的试验方法 |
Refractive Index and Refractive Dispersion of Hydrocarbon Liquids, Method of Test for (05.01, 10.03) |
ANSI/ASTM D 1220-1965 |
立式圆筒形储罐的测量和校准方法 |
Measurement and Calibration of Upright Cylindrical Tanks, Methods for (available as separate reprint only) (05.01, 05.02) |
ANSI/ASTM D 1238-1994 |
利用挤压式塑性计测试热塑性塑料流率的试验方法 |
Flow Rate of Thermoplastics by Extrusion Plastometer, Test Method for (08.01) |
ANSI/ASTM D 1239-1992 |
用化学制剂测试萃取塑料薄膜阻力的方法 |
Test Method for Resistance of Plastic Films to Extraction by Chemicals (08.01) |
ANSI/ASTM D 1242-1992 |
塑性材料抗磨损的试验方法 |
Test Methods for Resistance of Plastic Materials to Abrasion (08.01) |
ANSI/ASTM D 1243-1995 |
氯乙烯聚合物的稀溶液粘度的试验方法 |
Test Method for Dilute Solutions Viscosity of Vinyl Chloride Polymers (08.01) |
ANSI/ASTM D 1249-1992 |
辛基邻苯二甲酸酯增塑剂规范 |
Specification for Octyl OrthoPhthalate Ester Plasticizers (X-153691) |
ANSI/ASTM D 1250-1980 |
石油测量用表(由单页表格组成.为获得成套表格可同API或ASTM联系) |
Petroleum Measurement Tables (consists of a single sheet listing of the tables. Contact API or ASTM for the complete tables.) (05.01, 10.03) |
ANSI/ASTM D 1263-1994 |
机动车车轮轴承润滑脂的泄漏倾向.(05.01)试验方法 |
Leakage Tendencies of Automotive Wheel Bearing Greases, Method of Test for (05.01) |
ANSI/ASTM D 1264-1987 |
润滑脂的水冲洗特性的试验方法(05.01) |
Test Method for Water Washout Characteristics of Lubricating Greases (05.01) |
ANSI/ASTM D 1265-1992 |
液化石油气取样的实施规程(05.01) |
Practice for Sampling Liquefied Petroleum (LP) Gases (05.01) |
ANSI/ASTM D 1266-1991 |
石油产品中硫的试验方法(灯法)(05.01) |
Test Method for Sulfur in Petroleum Products (Lamp Method) (05.01) |
ANSI/ASTM D 1267-1995 |
液化石油气的蒸气压力(液化石油气法).(05.01,05.05)试验方法 |
Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method), Method of Test for (05.01, 05.05) |
ANSI/ASTM D 127-1987 |
石油蜡(包括石油)滴落熔点的测试方法 |
Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum (05.01, 15.09) |
ANSI/ASTM D 128-1994 |
润滑油脂分析方法 |
Analysis of Lubricating Grease, Methods of (05.01) |
ANSI/ASTM D 1287-1998 |
发动机冷却剂和防锈剂的pH值的测试方法 |
Test Method for pH of Engine Coolants and Antirusts |
ANSI/ASTM D 129-1995 |
石油产品中硫含量的试验方法(一般氧弹法) |
Test Method for Sulfur in Petroleum Products (General Bomb Method) (05.01) |
ANSI/ASTM D 1291-2001 |
与氯要求或水的需要或二者兼有的评价的操作规程 |
Practice for Estimation of Chlorine Requirement or Demand of Water, or Both |
ANSI/ASTM D 1298-1985 |
原油和液化石油产品的密度、比重或API重力(比重计法).(05.01,10.03)试验方法 |
Density, Specific Gravity, or API Gravity of Crude Petroleum and Liquid Petroleum Products (Hydrometer Method), Method of Test for (05.01, 10.03) |
ANSI/ASTM D 130-1994 |
用铜片失去光泽试验检查石油产品对铜腐蚀性的测试方法 |
Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test, Method for (05.01, 06.04) |
ANSI/ASTM D 1317-1989 |
新的及用过的润滑剂中的氯(醇化钠法).(05.01)试验方法 |
Chlorine in New and Used Lubricants (Sodium Alcoholate Method), Method of Test for (05.01) |
ANSI/ASTM D 1319-2002 |
用荧光指示剂吸附法测定液化石油产品中烃类的试验方法 |
Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, Test Method for (05.01) |
ANSI/ASTM D 1321-1986 |
石蜡的针入度.(05.01,15.09)试验方法 |
Needle Penetration of Petroleum Waxes, Method of Test for (05.01, 15.09) |
ANSI/ASTM D 1322-1997 |
航空涡轮燃料的烟点.(05.01)试验方法 |
Smoke Point of Aviation Turbine Fuels, Method of Test for (05.01) |
ANSI/ASTM D 1356-2001 |
有关空气取样和分析的术语 |
Terminology Relating to Sampling and Analysis of Atmospheres |
ANSI/ASTM D 1357-2001 |
大气取样规划的实施规程 |
Practice for Planning the Sampling of the Ambient Atmosphere |
ANSI/ASTM D 1367-1990 |
石墨的润滑质量规范(05.01) |
Specifications for Lubricating Qualities of Graphites (05.01) |
ANSI/ASTM D 1368-1989 |
主要参考燃料中铅的浓度.(05.01)试验方法 |
Concentrations of Lead in Primary Reference Fuels, Method of Test for (05.01) |
ANSI/ASTM D 1384-1998 |
玻璃器皿中发动机冷却剂腐蚀试验的试验方法 |
Test Method for Corrosion Test for Engine Coolants in Glassware |
ANSI/ASTM D 1385-2001 |
水中水合肼的试验方法 |
Test Method for Hydrazine in Water |
ANSI/ASTM D 1394-1996 |
分析仪器和计算机系统间信息传输规范 |
Specification for Transferring Information between Clinical Instruments and Computer Systems |
ANSI/ASTM D 1401-1995 |
石油和合成流体中水的可分离性的试验方法(05.01) |
Test Method for Water Separability of Petroleum Oils and Synthetic Fluids (05.01) |
ANSI/ASTM D 1403-1991 |
用四分之一和二分之一标度的锥度设备测定润滑脂针入度的试验方法(05.01) |
Test Method for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment (05.01) |
ANSI/ASTM D 1404-1994 |
润滑脂中有害颗粒的评价.(05.01)试验方法 |
Estimation of Deleterious Particles in Lubricating Grease, Method for (05.01) |
ANSI/ASTM D 1405-1995 |
航空燃料消耗的净热量的评价方法(05.01) |
Method for Estimation of Net Heat of Combustion of Aviation Fuels (05.01) |
ANSI/ASTM D 1406-1965 |
水箱的校准(05.01) |
Liquid Calibration of Tanks (05.01) |
ANSI/ASTM D 1407-1965 |
驳船的测量和校准.(05.01)试验方法 |
Measurement and Calibration of Barges, Method for (05.01) |
ANSI/ASTM D 1408-1965 |
球状容器的测量和校准.(05.01)试验方法 |
Measurement and Calibration of Spheres and Spheroids, Method for (05.01) |
ANSI/ASTM D 1409-1965 |
油罐车的测量和校准(05.01) |
Measurement and Calibration of Tank Cars (05.01) |
ANSI/ASTM D 1410-1965 |
水平水箱的测量和校准.(05.01)试验方法 |
Measurement and Calibration of Horizontal Tanks, Method for (05.01) |
ANSI/ASTM D 1429-1999 |
水和盐水比重的试验方法 |
Test Methods for Specific Gravity of Water and Brine |
ANSI/ASTM D 1430-1991 |
聚氯三氟乙烯(PCTFE)塑料规范(08.01) |
Specification for Polychlorotrifluoroethylene (PCTFE) Plastics (08.01) |
ANSI/ASTM D 1435-1994 |
塑料的抗户外风化的实施规程 |
Practice for Outdoor Weathering of Plastics (08.01) |
ANSI/ASTM D 1457-1992 |
聚四氟乙烯模塑和挤塑材料规范(08.01) |
Specification for Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.01) |
ANSI/ASTM D 1458-1997 |
电绝缘用完全硫化硅橡胶涂层的玻璃布与玻璃带的试验方法 |
Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
ANSI/ASTM D 1459-1993 |
电绝缘用硅氧烷清漆玻璃布规范(10.01) |
Specification for Silicone Varnished Glass Cloth and for Electrical Insulation (10.01) |
ANSI/ASTM D 1460-1996 |
基本卫生知识模数的定义和分配(医疗逻辑模数用Arden语法)规范 |
Specification for Defining and Sharing Modular Health Knowledge Bases (Arden Syntax for Medical Logic Modules) |
ANSI/ASTM D 1465-1990 |
石蜡的烫印温度.(05.01,15.09)试验方法 |
Blocking Point of Petroleum Wax, Method of Test for (05.01, 15.09) |
ANSI/ASTM D 1478-1991 |
滚珠轴承润滑脂的低温扭矩的试验方法(05.01) |
Test Method for Low-Temperature Torque of Ball Bearing Greases (05.01) |
ANSI/ASTM D 1480-1993 |
用BINGHAM比重计测定粘性材料的密度和相对密度(比重)的试验方法(05.01) |
Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer (05.01) |
ANSI/ASTM D 1481-1993 |
用LIPKIN双毛细管比重计测定粘性材料的密度和相对密度(比重)的试验方法(05.01) |
Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (05.01) |
ANSI/ASTM D 149-1995 |
固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法(10.01) |
Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01) |
ANSI/ASTM D 1494-2001 |
增强塑料板的散射光传递因数的试验方法 |
Test Method for Diffuse Light Transmission Factor of Reinforced Plastic Panels (08.01, 08.04) |
ANSI/ASTM D 1499-1992 |
塑料曝光用光水曝露装置(碳弧型)的操作规程(08.01) |
Practice for Operating Light-and Water-Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics (08.01) |
ANSI/ASTM D 1500-1991 |
石油产品的ASTM颜色的试验方法(05.01) |
Test Method for ASTM Color of Petroleum Products (05.01) |
ANSI/ASTM D 1523-1995 |
90℃操作时电线和电缆用合成橡胶绝缘的规范(10.01) |
Specification for Synthetic Rubber Insulation for Wire and Cable, 90鳦 Operations (10.01) |
ANSI/ASTM D 1525-1991 |
塑料的维卡软化温度的试验方法(08.01) |
Test Method for Vicat Softening Temperature of Plastics (08.01) |
ANSI/ASTM D 1531-1995 |
用液体排量法测定相对介电常数和功耗因数的试验方法(10.01) |
Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures (10.01) |
ANSI/ASTM D 1550-1994 |
ASTM丁二烯测量表(05.01) |
ASTM Butadiene Measurement Tables (05.01) |
ANSI/ASTM D 1552-1995 |
石油产品中硫的试验方法(高温法)(05.01) |
Sulfur in Petroleum Products (High-Temperature Method), Method of Test for (05.01) |
ANSI/ASTM D 1553-1990 |
用作润滑剂的石墨的分析方法(05.01) |
Analysis of Graphites Used as Lubricants, Methods for (05.01) |
ANSI/ASTM D 156-1994 |
石油产品的赛波特比色试验方法(赛波特比色计法) |
Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) (05.01) |
ANSI/ASTM D 1593-1992 |
非刚性氯乙烯塑料薄板的规范(08.01) |
Specification for Nonrigid Vinyl Chloride Plastic Sheeting (08.01) |
ANSI/ASTM D 1600-1995 |
有关塑料的缩写术语(08.01) |
Terminology for Abbreviated Terms Relating to Plastics (08.01) |
ANSI/ASTM D 1601-1986 |
乙烯聚合物的稀释溶液粘度的试验方法(08.02) |
Dilute Solution Viscosity of Ethylene Polymers, Test Method for (08.02) |
ANSI/ASTM D 1608-2001 |
燃气产品中氮的氧化物的试验方法(酚醛二磺酸法) |
Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedure) |
ANSI/ASTM D 1622-1992 |
刚性泡沫塑料的表观密度的试验方法(08.02) |
Test Method for Apparent Density of Rigid Cellular Plastics (08.02) |
ANSI/ASTM D 1655-1994 |
航空涡轮燃料的规范(05.01) |
Specification for Aviation Turbine Fuels (05.01) |
ANSI/ASTM D 1657-1989 |
用压力比重计测定轻烃类的密度或相对密度的试验方法(05.01) |
Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer, Method of Test for (05.01) |
ANSI/ASTM D 1662-1992 |
切割液中活性硫的试验方法(05.01) |
Active Sulfur in Cutting Fluids, Method of Test for (05.01) |
ANSI/ASTM D 1673-1994 |
电绝缘用膨胀多孔塑料的相对介电常数和功耗因数的试验方法(10.01) |
Test Methods for Relative Permitivity and Dissipation Factor of Expanded Cellular Plastics Used for Electrical Insulation (10.01) |
ANSI/ASTM D 1675-1995 |
聚四氟乙烯管的试验方法(10.01) |
Test Methods for Polytetrafluoroethylene Tubing (10.01) |
ANSI/ASTM D 1687-2002 |
水中铬的测试方法 |
Test Methods for Chromium in Water |
ANSI/ASTM D 1693-2001 |
乙烯塑料的周围应力断裂的试验方法(08.01) |
Test Method for Environmental Stress-Cracking of Ethylene Plastics (08.01) |
ANSI/ASTM D 1694-1987 |
纤维玻璃(玻璃纤维增强热固树脂)管螺纹(60-Deg.Stub)标准规范(08.04) |
Threads (60-Deg. Stub) for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe, Standard Specification for (08.04) |
ANSI/ASTM D 1708-1997 |
用微型抗拉试样测试塑料抗拉特性的试验方法 |
Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
ANSI/ASTM D 1709-2001 |
用自由落体法测定聚乙烯薄膜抗冲击的试验方法(08.02) |
Test Method for Impact Resistance of Polyethylene Film by the Free-Falling Dart Method (08.02) |
ANSI/ASTM D 1710-1991 |
聚四氟乙烯基本型材、杆材和重壁管(08.02) |
Polytetrafluoroethylene (PTFE) Basic Shapes, Rod and Heavy-Walled Tubing (08.02) |
ANSI/ASTM D 1711-1996 |
有关电绝缘的术语(10.01) |
Terminology Relating to Electrical Insulation (10.01) |
ANSI/ASTM D 1712-1989 |
塑料耐硫化物侵蚀的试验方法(08.02) |
Test Method for Resistance of Plastics to Sulfide Staining (08.02) |
ANSI/ASTM D 1739-2001 |
落尘的收集和测量的试验方法(可沉淀颗粒物质) |
Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
ANSI/ASTM D 1740-1991 |
航空涡轮燃料光度计数目的试验方法(05.01) |
Test Method for Luminometer Numbers of Aviation Turbine Fuels (05.01) |
ANSI/ASTM D 1742-1994 |
存储期间油和润滑脂分离的试验方法(05.01) |
Oil Separation from Lubricating Grease during Storage, Test Method for (05.01) |
ANSI/ASTM D 1743-1987 |
润滑脂防腐蚀特性的试验方法(05.01) |
Corrosion Prevention Properties of Lubricating Greases, Method of Test for (05.01) |
ANSI/ASTM D 1746-1997 |
塑料薄板的透明度的试验方法(X-40-3)(08.02) |
Test Method for Transparency of Plastic Sheeting (X-40-3) (08.02) |
ANSI/ASTM D 1747-1994 |
粘性材料折射率的试验方法(05.01) |
Test Method for Refractive Index of Viscous Materials (05.01) |
ANSI/ASTM D 1748-1983 |
在潮湿室测定金属保护剂的防锈性的试验方法(05.01) |
Rust Protection by Metal Preservatives in the Humidity Cabinet, Method of Test for (05.01) |
ANSI/ASTM D 1755-2001 |
聚氯乙烯树脂规范(08.02) |
Specification for Poly(Vinyl Chloride) Resins |
ANSI/ASTM D 1758-1996 |
用木桩现场试验评定木材防腐剂的试验方法 |
Test Method for Evaluating Wood Preservatives by Field Tests with Stakes |
ANSI/ASTM D 1760-2001 |
木材产品的压力处理规范 |
Specification for Pressure Treatment of Timber Products |
ANSI/ASTM D 1763-1994 |
环氧树脂规范(08.01) |
Specification for Epoxy Resins (08.01) |
ANSI/ASTM D 1784-1992 |
刚性聚氯乙烯合成物规范(08.02,08.04) |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds (08.02, 08.04) |
ANSI/ASTM D 1785-1999 |
聚氯乙烯(PVC)塑料管规范.表40、80和120 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
ANSI/ASTM D 1786-2001 |
甲苯二异氰酸盐规范 |
Toluenedisocyanate, Specifications for (08.02) |
ANSI/ASTM D 1790-1994 |
用冲击法测定塑料薄板的脆化温度的试验方法(08.01) |
Test Method for Brittleness Temperature of Plastic Sheeting by Impact (08.01) |
ANSI/ASTM D 1796-1983 |
用分离法测定原油和燃料油中水和沉淀的试验方法(05.01) |
Test for Water and Sediment in Crude Oils and Fuel Oils by Centrifuge, Method of (05.01) |