标准号 |
中文名称 |
英文名称 |
ANSI/ASTM E2255-2003 |
执行建筑物中铅危害视觉评定的实施规范 |
(Practice for Conducting Visual Assessments for Lead Hazards in Buildings ) |
ANSI/ASTM E2255-2004 |
建筑物中铅危害目视评定的实施规程 |
|
ANSI/ASTM E2257-2003 |
墙壁和天花板材料和组件的房屋着火试验 |
(Room Fire Test of Wall and Ceiling Materials and Assemblies ) |
ANSI/ASTM E2265-2003 |
混凝土和砖石工程中锚固件和紧固件的术语 |
(Terminology for Anchors and Fasteners in Concrete and Masonry ) |
ANSI/ASTM E2268-2004 |
用快速脉冲气压差法进行外窗、天窗和门的水渗透性试验方法 |
|
ANSI/ASTM E2269-2003 |
用气相色谱法测定密封绝缘玻璃组件中氩浓度的试验方法 |
(Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Gas Chromatography ) |
ANSI/ASTM E2270-2003 |
不安全状态下对建筑物的正面进行周期性检验的实施规范 |
(Practice for Periodic Inspection of Building Facades for Unsafe Conditions ) |
ANSI/ASTM E2271-2003 |
随着铅危害作用在独院住宅和儿童设施中的逐渐降低检验安全距离的实施规范 |
(Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-family Dwellings and Child-occupied Facilities ) |
ANSI/ASTM E2271-2004 |
随着铅危害作用在独院住宅和儿童设施中的逐渐降低检验安全距离的实施规程 |
|
ANSI/ASTM E2273-2003 |
外部绝缘和精整系统(EIFS)包壁组件排水效率的测定的试验方法 |
(Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies ) |
ANSI/ASTM E2280-2003 |
配备有保健设施的病房内具有软垫座椅的表面火险评估指南 |
(Guide for the Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities ) |
ANSI/ASTM E2284-2003 |
当样品中出现零反应时使用属性数据为不合格项的系数或数量或不合格发生率设定上置信限的实施规范 |
(Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-conforming Items, or a Rate of Occurence for Non-conformities, Using Attribute Data, When There Is a Zero Response in the Sample ) |
ANSI/ASTM E23-2002 |
金属材料切口试棒冲击试验的试验方法 |
(Test Methods for Notched Bar Impact Testing of Metallic Materials ) |
ANSI/ASTM E23-2005 |
金属材料的切口试条冲击试验的试验方法 |
|
ANSI/ASTM E230-2002 |
温度规范.标准化热电偶的电动势(EMF)表 |
(Specification for Temperature - Electromotive Force (EMF) Tables for Standardized Thermocouples ) |
ANSI/ASTM E2304a-2003 |
LIF荧光照相胶片剂量测定系统使用的实施规程 |
(Practice for Use of a LIF Photo-Fluorescent Film Dosimetry System ) |
ANSI/ASTM E2307-2004 |
使用中型多层测试仪器测定周边挡火墙系统耐火性的试验方法 |
|
ANSI/ASTM E2319-2004 |
通过特定压差下的样品测定通过外窗、幕墙和门的正面和侧面的空气流的试验方法 |
|
ANSI/ASTM E2320-2004 |
热环境和室内空气条件下用办公室设施的适用性分类 |
|
ANSI/ASTM E2335-2004 |
实验室监视器指南 |
|
ANSI/ASTM E2336-2004 |
防火润滑脂管道封装系统的试验方法 |
|
ANSI/ASTM E2343-2004 |
常规剂量测定系统的性能表征标准实施规范 |
|
ANSI/ASTM E2343-2004 |
常规剂量测定系统的性能表征标准实施规范 |
(Standard Practice for Performance Characterization of Routine Dosimetery Systems ) |
ANSI/ASTM E2354-2004 |
评估密封绝缘玻璃装置内吸收性电色涂层耐用性的指南 |
|
ANSI/ASTM E2355-2004 |
镶玻璃表面上吸收性电色涂层一致性测量的试验方法 |
|
ANSI/ASTM E2364-2004 |
健康护理中的语音识别技术产品指南 |
|
ANSI/ASTM E2369-2004 |
护理记录的连续性规范 |
|
ANSI/ASTM E2381-2004 |
流化床和液体流的辐射处理中剂量测定指南 |
|
ANSI/ASTM E2405-2005 |
使用垂直定向样品的中型试验测定材料耐火和耐热参数的试验方法 |
|
ANSI/ASTM E241-2004 |
提高房屋建筑物抗水损坏耐久性的实施规程 |
|
ANSI/ASTM E283-2004 |
通过样品的规定压差测定外窗、幕墙和门的漏气率的试验方法 |
|
ANSI/ASTM E329-2003 |
建筑材料试验和/或检验机构的规范 |
(Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction ) |
ANSI/ASTM E329-2005 |
从事施工材料试验和/或检验的机构的规范 |
|
ANSI/ASTM E330-2002 |
用均匀静态大气压差法测定外窗、隔墙和门结构性能的试验方法(04.11) |
(Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) ) |
ANSI/ASTM E405-2004 |
窗磨损试验旋转操作的试验方法 |
|
ANSI/ASTM E424-2002 |
片材的太阳能量传输性和反射性(陆地上)的试验方法 |
(Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials ) |
ANSI/ASTM E455-2004 |
建筑物构架楼板或屋顶隔板结构的静态负载试验方法 |
|
ANSI/ASTM E456-2002 |
质量和统计学的相关术语 |
(Terminology Relating to Quality and Statistics ) |
ANSI/ASTM E529-2004 |
房屋建筑用桁条和大梁的弯曲试验执行指南 |
|
ANSI/ASTM E535-2005 |
着火试验响应标准编写的实施规程 |
|
ANSI/ASTM E535-2005 |
着火试验响应标准编写的实施规程 |
|
ANSI/ASTM E535a-2005 |
着火试验反应标准编写规程 |
|
ANSI/ASTM E541-2002 |
从事建造建筑物的系统分析和符合性保证的机构的准则 |
(Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building ) |
ANSI/ASTM E648-2003 |
用辐射热能源测定地板包覆材料临界辐射通量的试验方法 |
(Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source ) |
ANSI/ASTM E648-2004 |
使用辐射热源的地板覆盖系统的临界辐射通量的试验方法 |
|
ANSI/ASTM E651-2002 |
对从事建造建筑物的系统分析和符合性保证的机构的能力评价导则 |
(Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building ) |
ANSI/ASTM E699-2003 |
检验机构评价的标准规程 |
(Practice for Criteria for Evaluation of Agencies Involved in Testing ) |
ANSI/ASTM E72-2002 |
建筑结构用板条的传导强度的试验方法 |
(Methods of Conducting Strength Tests of Panels for Building Construction (04.11) ) |
ANSI/ASTM E8-2004 |
金属材料抗拉试验的试验方法 |
|
ANSI/ASTM E800-2005 |
着火时存在或产生的气体测量指南 |
|
ANSI/ASTM E814-2002 |
穿透防火墙的着火试验方法 |
(Methods for Fire Tests of Through-Penetration Fire Stops ) |
ANSI/ASTM E833a-2002 |
建筑经济学术语 |
(Terminology of Building Ergonomics (04.07) ) |
ANSI/ASTM E84-2003 |
建筑材料表面燃烧特性的试验方法 |
(Test Method for Surface Burning Characteristics of Building Materials ) |
ANSI/ASTM E84-2004 |
建筑材料的表面燃烧特性的试验方法 |
|
ANSI/ASTM E84-2005 |
建筑材料表面燃烧特性的试验方法 |
|
ANSI/ASTM E865-2003 |
蜂窝夹层结构板用结构膜粘结剂规范 |
(Specification for Structural Film Adhesives for Honeycomb Sandwich Panels (04.11) ) |
ANSI/ASTM E8M-2004 |
金属材料抗拉试验的试验方法(米制) |
|
ANSI/ASTM E906-2004 |
材料和产品的热和可见烟雾释放率的试验方法 |
|
ANSI/ASTM E917-2002 |
测定建筑物和建筑系统使用期成本的实施规程 |
(Practice for Measuring Life-Cycle Costs of Buildings and Building Systems (04.11) ) |
ANSI/ASTM E990-2004 |
蜂窝状夹层遮蔽板用芯层拼接粘结剂规范 |
|
ANSI/ASTM F 1000-1997 |
管道系统制图符号实施规程 |
Practice for Piping System Drawing Symbols |
ANSI/ASTM F 1002-1996 |
防止工人遭受特种熔化物质和有关高温侵害用防护服装的性能规范 |
Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
ANSI/ASTM F 1003-1997 |
摩托救生艇探照灯规范 |
Specification for Searchlights on Motor Lifeboats |
ANSI/ASTM F 1005-1997 |
采暖、通风与空调导管形状的实施规程.设计配置的描述和识别 |
Practice for HVAC Duct Shapes; Identification and Description of Design Configuration |
ANSI/ASTM F 1006-1997 |
船用管道装置用液滴分离器规范 |
Specification for Entrainment Separators for Use in Marine Piping Applications |
ANSI/ASTM F 1007-1997 |
船用套装滑动成型的管道膨胀节规范 |
Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
ANSI/ASTM F 1020-1997 |
船用暗线阀实施规程 |
Practice for Line Blind Valves for Marine Applications |
ANSI/ASTM F 1040-2001 |
空气调节粘性冲击、干式、可置换的收尘器装置规范 |
Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceabl |
ANSI/ASTM F 1041-1995 |
聚烯烃燃气压力管和配件的挤压指南 |
Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Fittings |
ANSI/ASTM F 1052-1996 |
气密的全密封化工防护套服的加压试验实施规程 |
Practice for Pressure Testing of Gas-Tight Totally Encapsulating Chemical-Protective Suits |
ANSI/ASTM F 1053-1997 |
钢制船体结构公差指南 |
Guide for Steel Hull Construction Tolerances |
ANSI/ASTM F 1055-1996 |
外径控制的聚乙烯管和管路用电熔型聚乙烯配件规范 |
Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing |
ANSI/ASTM F 1056-1996 |
套管熔融连接聚乙烯管和配件用套管熔融工具规范 |
Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings |
ANSI/ASTM F 1074-1997 |
焊接喇叭型绳栓规范 |
Specification for Cleats, Welded Horn Type |
ANSI/ASTM F 1076-1997 |
管用扩张焊接及银黄铜套管连接件实施规程 |
Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
ANSI/ASTM F 1092-1997 |
挤拔玻璃纤维增强塑料制露天防风暴和方型防护扶手规范 |
Specification for Fiberglass (Grp) Pultruded Open-Weather Storm- and Guard-Square Handrails |
ANSI/ASTM F 1097-1997 |
耐火灰浆(高温,空气凝固)规范 |
Specification for Mortar, Refractory (High Temperature, Air Setting) |
ANSI/ASTM F 1134-1997 |
船用电动机和发电机绝缘电阻监测器规范 |
Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
ANSI/ASTM F 1145-1997 |
冷锻、焊接、锻制松紧螺纹扣规范 |
Specification for Turnbuckles, Swaged, Welded, Cast, Forged |
ANSI/ASTM F 1163-2001 |
赛马运动和骑马用安全帽规范 |
Specification for Headgear Used in Horse Sports and Horseback Riding |
ANSI/ASTM F 1173-2001 |
船用热固树脂玻璃纤维管和配件规范 |
Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications |
ANSI/ASTM F 1176-2001 |
最大工作压力为63psi(磅/平方英寸)热塑灌溉系统的设计和安装实施规程 |
Practice for Design and Installation of Thermoplastic Irrigation Systems with Maximum Working Pressure of 63 PSI |
ANSI/ASTM F 1178-1997 |
上光系统、烘烤、金属连接装置和家具规范 |
Specification for Enameling System, Baking, Metal Joiner Work and Furniture |
ANSI/ASTM F 1179-1997 |
螺栓螺纹锁定厌氧复合物的检验程序的实施规程 |
Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs |
ANSI/ASTM F 1182-1997 |
阳极镀锌合金规范 |
Specification for Anodes, Sacrificial Zinc Alloy |
ANSI/ASTM F 1198-1997 |
舰艇防火监视系统指南 |
Guide for Shipboard Fire Detection Systems |
ANSI/ASTM F 1207-1997 |
监视激活电子系统中接地电阻用电绝缘监视器规范 |
Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems |
ANSI/ASTM F 1240-1997 |
鞋靴在有不同外来杂质界面的通道表面上的防滑性测量分类结果指南 |
Guide for Categorizing Results of Footwear Slip Resistance Measurements on Walkway Surfaces with an Interface of Various Foreign Substances |
ANSI/ASTM F 1245-1997 |
船舶用压缩和自闭型、单式与双式水龙头规范 |
Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
ANSI/ASTM F 1248-1996 |
测定聚氯乙烯管抗环境应力破裂性的试验方法 |
Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe |
ANSI/ASTM F 1271-1997 |
船上储罐液体过压保护装置用溢流阀规范 |
Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ANSI/ASTM F 1273-1997 |
防火用油罐通气孔规范 |
Specification for Tank Vent Flame Arresters |
ANSI/ASTM F 1291-1999 |
利用加热的人体模型测量衣服隔热性的试验方法 |
Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
ANSI/ASTM F 1298-1997 |
船用柔性扩展型球连接规范 |
Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
ANSI/ASTM F 1301-1990 |
化工防护服装标记的实施规程 |
Practice for Labeling Chemical Protective Clothing |
ANSI/ASTM F 1310-1997 |
65加仑配药罐规范 |
Specification for 65-Gallon Dispensing Tank |
ANSI/ASTM F 1311-1997 |
大直径制造的碳钢法兰规范 |
Specification for Large-Diameter Fabricated Carbon Steel Flanges |
ANSI/ASTM F 1326-1996 |
测量通用真空吸尘器的最大干燥空间的试验方法 |
Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
ANSI/ASTM F 1330-1997 |
金属研磨法除去管内氧化皮指南 |
Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe |
ANSI/ASTM F 1331-1997 |
电气和电子操作室中可移动板上乙烯铺面覆盖物的安装程序实施规程 |
Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces |
ANSI/ASTM F 1333-1997 |
消防和泡沫灭火站操纵室结构规范 |
Specification for Construction of Fire and Foam Station Cabinets |
ANSI/ASTM F 1334-1996 |
测定真空吸尘器噪声能量级别的试验方法 |
Test Method for Determining Sound Power Level of Vacuum Cleaners |
ANSI/ASTM F 1336-2001 |
装密封垫的聚氯乙烯(PVC)下水道管件规范 |
Specification for Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
ANSI/ASTM F 1337-1997 |
海船和海洋系统、设备用人体工效要求实施规程 |
Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities |
ANSI/ASTM F 1338-1997 |
船用主动力中速柴油发动机覆盖性能和机组最小工作范围指南 |
Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
ANSI/ASTM F 1342-1996 |
防护服装耐穿刺能力的测试方法 |
Test Method for Protective Clothing Material Resistance to Puncture |
ANSI/ASTM F 1347-1997 |
手工操作的加燃料软管卷盘规范 |
Specification for Manually Operated Fueling Hose Reels |
ANSI/ASTM F 1348-1997 |
气动转式去氧化皮规范 |
Specification for Pneumatic Rotary Descaling Machines |
ANSI/ASTM F 1380-1996 |
聚丁烯(PB)管用金属插入配件规范 |
Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
ANSI/ASTM F 1386-1997 |
油罐测深用测深管和操作板的结构指南 |
Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
ANSI/ASTM F 1409-1996 |
清洁地毯时吸尘器直线移动的试验方法 |
Test Method for Straight Line Movement of Cleaners while Cleaning Carpets |
ANSI/ASTM F 1412-2001 |
腐蚀废物的下水道系统用聚烯烃管和配件规范 |
Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
ANSI/ASTM F 1414-1999 |
身体下部(腿)所穿防护服装耐链锯切割性测量的试验方法 |
Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing |
ANSI/ASTM F 1417-1996 |
使用低压空气对塑料自流排水管道安装验收试验方法 |
Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air |
ANSI/ASTM F 1446-2001 |
防护头盔性能特征评定用设备和程序的试验方法 |
Test Methods for Equipment, and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ANSI/ASTM F 1449-1996 |
耐燃烧和热防护服装的维护和维修指南 |
Guide for Care and Maintenance of Flame Resistant and Thermally Protective Clothing |
ANSI/ASTM F 147-2001 |
高效颗粒状空气过滤器系统的空气净化性能的试验方法 |
Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air-Filter System |
ANSI/ASTM F 1471-1993 |
高效颗粒空气过滤系统的空气净化性能试验方法 |
Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air-Filter System |
ANSI/ASTM F 1473-2001 |
测量聚乙烯管和树脂抗裂纹缓慢增长的切口拉伸试验的试验方法 |
Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth Polyethylene Pipes and Resins |
ANSI/ASTM F 1475-1997 |
最大250升配料箱规范 |
Specification for Dispensing Tanks, 250 Litre Maximum |