标准号 |
中文名称 |
英文名称 |
| ANSI/ASME MFC-6M-1998 |
用涡流流量计测量管道中的液体流量 |
Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of |
| ANSI/ASME MFC-7M-1987 |
利用临界流量文氏喷嘴管测量气体流量 |
Gas Flow by Means of Critical Flow Venturi Nozzles, Measurement of |
| ANSI/ASME MFC-8M-1988 |
密封管道中液体流量.主设备和副设备之间压力信号传导的连接 |
Fluid Flow in Closed Conduits - Connections for Pressure Signal Transmission Between Primary and Secondary Devices |
| ANSI/ASME MH 1.1.2-1996 |
涉及托盘及相关结构的定义和术语 |
Definitions and Terminology Covering Pallets and Related Structures |
| ANSI/ASME MH 1.2.2M-1989 |
托盘尺寸 |
Pallet Sizes |
| ANSI/ASME MH 1.4.1M-1996 mh 1-1997 |
托盘试验程序 |
Procedures for Testing Pallets |
| ANSI/ASME MH 1.5M-1993 |
薄衬纸 |
Slip Sheets |
| ANSI/ASME MH 1.6-1996 mh 1-1997 |
木制托盘和相关结构耐久性测定用标准程序 |
Standard Procedures for Determination of Durability of Wooden Pallets and Related Structures |
| ANSI/ASME MH 1.7M-1996 mh 1-1997 |
托盘及相关结构的组配用传动紧固件 |
Driven Fasteners for Assembly of Pallets and Related Structures |
| ANSI/ASME MH 1.8M-1996 |
木制托盘 |
Wood Pallets |
| ANSI/ASME MH 1a Part IV-1998 |
出口商品用托盘 |
Export Pallets |
| ANSI/ASME MH 1b-2000 |
成组货件用托盘、滑板和其他底座 |
Pallets, Slip Sheets, and Other Bases for Unit Loads |
| ANSI/ASME MH1-2003 |
成组货件用托盘、滑板和其它基板 |
(Pallets, Slip Sheets, and Other Bases for Unit Loads ) |
| ANSI/ASME MH1-2005 |
成组货件用托盘、滑板和其它基板 |
|
| ANSI/ASME N 278.1-1975 |
与安全相关的自动和机动阀门功能规范标准 |
Self-Operated and Power Operated Safety-Related Valves Functional Specification Standard |
| ANSI/ASME N 509-1989 |
核电厂空气净化设备和部件 |
Nuclear Power Plant Air Cleaning Units and Components |
| ANSI/ASME N 510-1989 |
核空气净化系统的测试 |
Testing of Nuclear Air-Cleaning Systems |
| ANSI/ASME N 626.3-1993 |
特殊专业工程师的资格鉴定和责任 |
Qualifications and Duties of Specialized Professional Engineers |
| ANSI/ASME N509-2002 |
核电厂空气净化设备和部件 |
(Nuclear Power Plant Air Cleaning Units and Components ) |
| ANSI/ASME NOG-1-2002 |
桥式和门式起重机(支承桥和多横梁)的制造规则 |
Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder), Rules for Construction of |
| ANSI/ASME NOG-1-2004 |
桥式和门式起重机(支承桥和多横梁)的制造规则 |
|
| ANSI/ASME NQA-1-2004 |
核设施的质量保证要求 |
|
| ANSI/ASME NQA-1a-2002 |
核设施的质量保证要求 |
(Quality Assurance Requirements for Nuclear Facility Applications ) |
| ANSI/ASME NUM-1-1996 |
起重机、单轨铁路和提升机的制造规则(带有悬桥或悬挂式吊车或悬挂式提升机) |
Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type) |
| ANSI/ASME NUM-1-2004 |
起重机、单轨吊车和提升机的制造规则(带有悬桥或悬挂式吊车或悬挂式提升机) |
|
| ANSI/ASME NUM-1a-2002 |
起重机、单轨和提升机的建造规则 |
(Rules for Construction of Cranes, Monorails and Hoists ) |
| ANSI/ASME NUM-1b-2002 |
起重机、单轨铁路和提升机的制造规则 |
(Rules for Construction of Cranes, Monorails, and Hoists ) |
| ANSI/ASME OM Code-2001 |
核动力工厂的维护和操作 |
Operation and Maintenance of Nuclear Power Plants |
| ANSI/ASME OM-1990 |
核电站的运行和养护 |
Operation and Maintenance of Nuclear Power Plants |
| ANSI/ASME OM-S/Ga-2001 |
核动力工厂的维护和操作的标准和指南 |
Standards and Guides for Operation and Maintenance of Nuclear Power Plants |
| ANSI/ASME OM-S/Ga-2004 |
核电站的运行和维护的标准和指南 |
|
| ANSI/ASME OMaCode-2005 |
核电厂的操作和维修规范 |
|
| ANSI/ASME OMb-S/G-2003 |
核电站的操作和维修标准和指南 |
(Standards and Guides for Operation and Maintenance of Nuclear Power Plants ) |
| ANSI/ASME OMb-S/G-2005 |
核电厂操作和维护的标准和指南 |
|
| ANSI/ASME OMbCode-2003 |
核电站的操作和维修 |
(Operation and Maintenance of Nuclear Power Plants ) |
| ANSI/ASME OMCode-2004 |
核电厂的维护和操作标准 |
|
| ANSI/ASME PALD-1997 |
便携式自动提升装置 |
Portable Automotive Lifting Devices |
| ANSI/ASME PALD-2003 |
便携式自动提升装置 |
(Portable Automotive Lifting Devices ) |
| ANSI/ASME PALDb-2002 |
可移动自动升降装置 |
Portable Automotive Lifting Devices |
| ANSI/ASME PCC-1-2000 |
压力界限法兰连接接头组件的导则 |
Guidelines for Pressure Boundary Bolted Flange Joint Assembly |
| ANSI/ASME PTC 10-1974 |
性能测试规范.压缩机及排气机 |
Performance Test Code - Compressors and Exhausters |
| ANSI/ASME PTC 10.1-1997 |
压缩机和排气器的临时试验标准 |
Interim Test Code on Compressors and Exhausters |
| ANSI/ASME PTC 11-1984 |
风扇 |
Fans |
| ANSI/ASME PTC 12.1-1978 |
性能测试规范.密封式供水加热器 |
Performance Test Code - Closed Feedwater Heaters |
| ANSI/ASME PTC 12.2-1998 |
蒸汽冷凝装置的性能试验标准 |
Performance Test Code - Steam-Condensing Apparatus |
| ANSI/ASME PTC 12.3-1997 |
空气分离器 |
Deaerators |
| ANSI/ASME PTC 12.4-1992 |
脱湿器再热炉 |
Moisture Separator Reheaters |
| ANSI/ASME PTC 12.5-2000 |
单相热交换器 |
Single Phase Heat Exchangers |
| ANSI/ASME PTC 14-1970 |
性能测试规范.蒸发装置 |
Performance Test Code - Evaporating Apparatus |
| ANSI/ASME PTC 16-1958 |
性能测试规范.气体发生器和连续气体发生器 |
Performance Test Code - Gas Producers and Continuous Gas Generators |
| ANSI/ASME PTC 17-1973 |
性能试验规范.往复式内燃机 |
Performance Test Code - Reciprocating Internal-Combustion Engines |
| ANSI/ASME PTC 18-1992 |
水轮机 |
Hydraulic Turbines |
| ANSI/ASME PTC 19.1-1998 |
测量不确定度.仪器和装置 |
Measurement Uncertainty - Instruments and Apparatus |
| ANSI/ASME PTC 19.11-1997 |
动力循环中水和蒸汽的取样、调节和分析 |
Steam and Water Sampling, Conditioning and Analysis in the Power Cycle |
| ANSI/ASME PTC 19.2-1987 |
压力测量仪器仪表.第2部分 |
Pressure Measurement Instruments and Apparatus - Part 2 |
| ANSI/ASME PTC 19.22-1986 |
仪器仪表.数字系统技术 |
Instruments and Apparatus - Digital Systems Techniques |
| ANSI/ASME PTC 19.23-1980 |
模型试验指导手册.仪器仪表 |
Guidance Manual for Model Testing - Instruments and Apparatus |
| ANSI/ASME PTC 19.3-1974 |
性能测试规范.温度测量 |
Performance Test Code - Temperature Measurement |
| ANSI/ASME PTC 19.7-1980 |
轴功率测量.仪器仪表 |
Measurement of Shaft Horsepower - Instruments and Apparatus |
| ANSI/ASME PTC 19.8-1970 |
性能测试规范.测量指示功率用仪器仪表 |
Performance Test Code - Measurement of Indicated Power, Instruments and Apparatus |
| ANSI/ASME PTC 2-1980 |
性能测试规范.定义和数值 |
Performance Test Codes - Definitions and Values |
| ANSI/ASME PTC 20.1-1977 |
汽轮发电机组的速度和负载调节系统 |
Speed and Load Governing Systems for Steam Turbine Generator Units |
| ANSI/ASME PTC 20.2-1965 |
汽轮发电机组的超速切断系统 |
Overspeed Trip Systems for Steam Turbine - Generator Units |
| ANSI/ASME PTC 20.3-1970 |
性能测试规范.汽轮发电机组用压力控制系统 |
Performance Test Code - Pressure-Control Systems Used on Steam Turbine-Generator Units |
| ANSI/ASME PTC 21-1991 |
散粒物质集聚设备 |
Particulate Matter Collection Equipment |
| ANSI/ASME PTC 22-1997 |
燃气轮机的性能试验规则 |
Performance Test Code on Gas Turbines |
| ANSI/ASME PTC 23-1986 |
大气水冷却设备 |
Atmospheric Water Cooling Equipment |
| ANSI/ASME PTC 25-1994 |
减压设备 |
Pressure Relief Devices |
| ANSI/ASME PTC 28-1965 |
性能测试规范.细微散粒物质的特性测定 |
Performance Test Code - Determining the Properties of Fine Particulate Matter |
| ANSI/ASME PTC 29-1980 |
水力涡轮发电机组的速度调节系统 |
Speed-Governing Systems for Hydraulic Turbine-Generator Units |
| ANSI/ASME PTC 3.1-1974 |
性能测试规范.柴油机和燃烧器的燃料 |
Performance Test Code - Diesel and Burner Fuels |
| ANSI/ASME PTC 3.2-1990 |
性能测试规范.煤和焦炭 |
Performance Test Code - Coal and Coke |
| ANSI/ASME PTC 3.3-1974 |
性能测试规范.气体燃料 |
Performance Test Code - Gaseous Fuels |
| ANSI/ASME PTC 30-1991 |
空气冷却换热器 |
Air Cooled Heat Exchangers |
| ANSI/ASME PTC 31-1973 |
性能测试规范.离子交换器 |
Performance Test Code - Ion Exchange Equipment |
| ANSI/ASME PTC 32.1-1969 |
性能测试规范.核装置蒸汽供给系统 |
Performance Test Code - Nuclear Steam Supply Systems |
| ANSI/ASME PTC 32.2-1978 |
轻水反应堆中核燃料性能测试方法 |
Nuclear Reactor Fuel in Light Water Reactors, Methods of Measuring the Performance of |
| ANSI/ASME PTC 33-1978 |
大型焚化炉的性能测试规范 |
Large Incinerators, Performance Test Code for |
| ANSI/ASME PTC 33a-1980 |
大型焚化炉的性能测试规范 |
Large Incinerators, Performance Test Code for |
| ANSI/ASME PTC 36-1985 |
工业声音的测量 |
Industrial Sound, Measurement of |
| ANSI/ASME PTC 38-1980 |
性能测试规范.气流中散粒物质浓度的测定 |
Concentration of Particulate Matter in a Gas Stream, Determining - Performance Test Code |
| ANSI/ASME PTC 39.1-1980 |
性能测试规范.蒸汽系统中消除凝结物装置 |
Condensate Removal Devices for Steam Systems - Performance Test Code |
| ANSI/ASME PTC 4.1-1964 |
性能测试规范.蒸气发生器(包括ASME1968及1969的补充件) |
Performance Test Code - Steam Generating Units (includes ASME 1968 and 1969 addenda) |
| ANSI/ASME PTC 4.2-1969 |
性能试验规范.煤炭粉碎机 |
Performance Test Code - Coal Pulverizers |
| ANSI/ASME PTC 4.3-1974 |
性能测试规范.空气加热器 |
Performance Test Code - Air Heaters |
| ANSI/ASME PTC 4.4-1981 |
燃气轮机热回收蒸汽发电机 |
Gas Turbine Heat Recovery Steam Generators |
| ANSI/ASME PTC 40-1991 |
烟道脱硫装置 |
Flue Gas Desulfurization Units |
| ANSI/ASME PTC 42-1988 |
风力涡轮机 |
Wind Turbines |
| ANSI/ASME PTC 46-1996 |
总体工厂性能 |
Overall Plant Performance |
| ANSI/ASME PTC 6 App-1982 |
汽轮机的性能试验标准(ANSI/ASME PTC 6的补充) |
Performance Test Code - Steam Turbines (appendix to ANSI/ASME PTC 6) |
| ANSI/ASME PTC 6-1996 |
汽轮机的性能试验标准6 |
Performance Test Code 6 on Steam Turbines |
| ANSI/ASME PTC 6R-1985 |
性能试验规范.汽轮机中不确定性测量的评定指南 |
Performance Test Code - Steam Turbines, Guidance for Evaluation of Measurement Uncertainty |
| ANSI/ASME PTC 6S-1988 |
性能测试规范.蒸汽涡轮机例行试验简化程序 |
Performance Test Code - Steam Turbines, Simplified Procedures for Routine Tests |
| ANSI/ASME PTC 9-1974 |
性能试验规范.容积式压缩机、真空泵和鼓风机 |
Performance Test Code - Displacement Compressors, Vacuum Pumps and Blowers |
| ANSI/ASME PTC1-2004 |
性能试验规则.通用说明书 |
|
| ANSI/ASME PTC18-2002 |
水轮机和泵.涡轮机 |
(Hydraulic Turbines and Pump - Turbines ) |
| ANSI/ASME PTC19.2-2004 |
压力测量仪器仪表.第2部分 |
|
| ANSI/ASME PTC19.5-2002 |
流量测量 |
(Flow Measurement ) |
| ANSI/ASME PTC19.5-2004 |
流量测量 |
|
| ANSI/ASME PTC22-2005 |
燃气轮机的性能试验规程 |
|
| ANSI/ASME PTC23-2003 |
大气水冷却设备 |
(Atmospheric Water Cooling Equipment ) |
| ANSI/ASME PTC29-2005 |
水力涡轮发电机组的速度调节系统 |
|
| ANSI/ASME PTC39.1-2005 |
凝水排除器 |
|
| ANSI/ASME PTC50-2002 |
燃料电池动力系统性能 |
(Fuel Cell Power Systems Performance ) |
| ANSI/ASME PTC6.2-2004 |
联合循环蒸汽涡轮机 |
|
| ANSI/ASME PVHO-1-2002 |
人占用的压力容器的安全标准 |
Safety Standard for Pressure Vessels for Human Occupancy |
| ANSI/ASME PVHO-2-2003 |
人用压力容器的安全标准.PVHO丙烯酸窗口在使用中的指南= |
(Safety Standard for Pressure Vessel for Human Occupancy In-Service Guidelines for PVHO Acrylic Windows ) |
| ANSI/ASME QEI-1-1993 |
电梯检验员的资格鉴定 |
Qualification of Elevator Inspectors |
| ANSI/ASME QEI-1-2004 |
电梯检验员的资格鉴定 |
|
| ANSI/ASME QEI-1b-2003 |
电梯检验员的资格鉴定 |
(Qualification of Elevator Inspectors ) |
| ANSI/ASME QFO-1-1998 |
高效能矿物燃料燃烧设备操作人员的资格鉴定 |
Qualification of High Capacity Fossil Fuel Fired Plant Operators |
| ANSI/ASME QHO-1-1994 |
危险废物焚烧炉操作人员的资格鉴定和认证 |
Qualification and Certification of Hazardous Waste Incinerator Operators |
| ANSI/ASME QHO-1-2004 |
危险废物焚烧炉操作人员的资格鉴定和认证 |
|
| ANSI/ASME QHO-1-2004 |
危险废物焚烧炉操作人员的资格鉴定和认证 |
(Qualification and Certification of Hazardous Waste Incinerator Operators ) |
| ANSI/ASME QME-1-1994 |
第QV节:核电站现用阀门组件的功能合格的鉴定要求(ANSI/B16.41-83(R89)的修订和更换代号) |
Section QV Functional Qualification Requirements for Active Valve Assemblies for Nuclear Power Plants |
| ANSI/ASME QME-1-2002 |
核电站现用机械设备的质量要求 |
(Qualification of Active Mechanical Equipment for Nuclear Power Plants ) |
| ANSI/ASME QRO-1-1994 |
资源回收设施操作人员的资格鉴定和认证 |
Qualification and Certification of Resource Recovery Facility Operators |
| ANSI/ASME QRO-1-2005 |
资源回收设施操作人员的资格鉴定和认证 |
|
| ANSI/ASME RA-S-2002 |
核动力厂设施的概率风险评估 |
Probabilistic Risk Assessment for Nuclear Power Plant Applications |
| ANSI/ASME RA-Sa-2003 |
核动力厂设施的概率风险评估 |
(Probabilistic Risk Assessment for Nuclear Power Plant Applications ) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com