标准号 |
中文名称 |
英文名称 |
ANSI/ASTM D 4127-2002 |
用于离子选择电极的术语 |
Terminology Used with Ion-Selective Electrodes |
ANSI/ASTM D 4161-2001 |
使用柔性弹性密封对纤维玻璃(玻璃纤维增强热固树脂)管的接头的规范 |
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Joints Using Flexible Elastomeric Seals (08.04) |
ANSI/ASTM D 4167-1991 |
纤维增强塑料风扇和鼓风机规格 |
Specification for Fiber-Reinforced Plastic Fans and Blowers (08.04) |
ANSI/ASTM D 4170-1993 |
润滑脂对磨损侵蚀防护的试验方法 |
Test Method for Fretting Wear Protection by Lubricating Grease (05.02) |
ANSI/ASTM D 4171-1991 |
燃料系统防冻剂规范 |
Specification for Fuel System Icing Inhibitors (05.02) |
ANSI/ASTM D 4172-1994 |
润滑液防磨性的试验方法(四球法) |
Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method), Method of Test for (05.02) |
ANSI/ASTM D 4174-1989 |
石油液压系统的清洁、冲洗和净化实施规程 |
Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems, Practice for the (05.02) |
ANSI/ASTM D 4175-1992 |
石油、石油产品和润滑脂相关术语 |
Petroleum, Petroleum Products, and Lubricants, Terminology Relating to (05.03) |
ANSI/ASTM D 4176-2002 |
蒸馏燃料中游离水和粒子污染物的试验方法(清洁和透明通过/停止程序) |
Test Method for Free Water and Particulate Contamination in Distillate Fuels (Clear and Bright Pass/Fail Proceedings) (05.02) |
ANSI/ASTM D 4177-1982 |
石油及石油产品的自动取样的方法 |
Automatic Sampling of Petroleum and Petroleum Products, Method for the (05.02) |
ANSI/ASTM D 4178-1982 |
湿气分析仪校准的实施规程 |
Calibrating Moisture Analyzers, Practice for (05.02) |
ANSI/ASTM D 4181-1995 |
乙缩醛(POM)模塑挤压材料的规范 |
Specification for Acetal (POM) Molding and Extrusion Materials (08.02) |
ANSI/ASTM D 4195-2001 |
反渗透应用的水分析指南 |
Guide for Water Analysis for Reverse Osmosis Application |
ANSI/ASTM D 4203-1995 |
苯乙烯丙烯氰注射和挤压材料规范 |
Specification for Styrene Acrylonitrile (SAN) Injection and Extrusion Materials (08.02) |
ANSI/ASTM D 4216-1992 |
刚性聚氯乙烯(PVC)和相关塑料建筑产品组分的标准规格 |
Rigid Poly (Vinyl Chloride) (PVC) and Related Plastic Building Products Compounds, Standard Specification for (08.04) |
ANSI/ASTM D 4218-1996 |
使用隔焰炉技术对聚乙烯化合物中碳黑含量的试验方法 |
Test Method for Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique (08.03) |
ANSI/ASTM D 4225-1990 |
苯乙烯-丁二烯薄板规范 |
Specification for Styrene-Butadiene Sheeting (08.03) |
ANSI/ASTM D 4226-1995 |
刚性聚氯乙烯(PVC)建筑产品抗冲击性的试验方法 |
Test Method for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products (95-1, Item 42) (08.02) |
ANSI/ASTM D 4241-1992 |
气体涡轮发电机润滑油系统的设计 |
Gas Turbine Generator Lubricating Oil System, Design of (05.02) |
ANSI/ASTM D 4244-1995 |
重负载和超重负载丙烯腈丁二烯聚氯乙烯(NBR PVC)电线和电缆护套通用规范 |
Specification for General-Purpose, Heavy-Duty and Extra-Heavy Duty Acrylonitrile-Butadiene Polyvinyl Chloride (NBR PVC) Jackets for Wire and Cable (10.02) |
ANSI/ASTM D 4247-1995 |
黑色重负载和超重负载聚氯丁二烯电线和电缆护套通用规范 |
Specification for General-Purpose Black Heavy-Duty and Black Extra-Heavy Duty Polychloroprene Jackets for Wire and Cable (10.02) |
ANSI/ASTM D 4248-1992 |
蒸气涡轮发电机供油系统的设计 |
Design of Steam Turbine Generator Oil Systems (05.02) |
ANSI/ASTM D 4272-1999 |
通过装有测量仪器的镖坠落法测量塑料薄膜耐冲击性的试验方法 |
Plastic Film by Instrumented Dart Drop, Test Method for Impact Resistance of (08.03) |
ANSI/ASTM D 4273-1995 |
聚氨基甲酸乙酯原材料的试验方法:聚醚多醇初始羟基含量的测定 |
Method for Testing Polyurethane Raw Materials: Determination of Primary Hydroxyl Contents of Polyether Polyols (08.02) |
ANSI/ASTM D 4274-1994 |
聚氨酯多醇原材料的测试方法:多醇羟基数的测定 |
Method for Testing Polyurethane Polyol Raw Materials: Determination of Hydroxyl Numbers of Polyols (08.03) |
ANSI/ASTM D 4275-1991 |
用气相色谱法对乙烯高聚物和乙烯乙酸乙烯共聚物的丁基化羟基甲苯的试验方法 |
Test Method for Determination of Butylated Hydroxytoluene (BHT) in Polymers of Ethylene and EthyleneVinyl Acetate (EVA) Copolymers by Gas Chromatography (08.03) |
ANSI/ASTM D 4276-1996 |
有限通道面积实施规程 |
Practice for Confined Area Entry |
ANSI/ASTM D 4278-1996 |
无机化学分析用木质样品制备的湿灰化程序的试验方法 |
Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis |
ANSI/ASTM D 4289-1995 |
弹性润滑脂兼容性的试验方法 |
Method of Testing Compatibility of Lubricating Grease with Elastomers (05.02) |
ANSI/ASTM D 4290-1988 |
加速状态下测定汽车轮轴承脂漏泄倾向的试验方法 |
Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions, Method of Test for (05.02) |
ANSI/ASTM D 4291-1993 |
用过的发动机油中痕量乙二醇的试验方法 |
Trace Ethylene Glycol in Used Engine Oil, Test Method for (05.02) |
ANSI/ASTM D 4292-1992 |
煅烧石油焦振动松密度的试验方法 |
Vibrated Bulk Density of Calcined Petroleum Coke, Test Method for (05.03) |
ANSI/ASTM D 4293-1983 |
涡轮机润滑用磷酸盐酯基液体规范 |
Phosphate Ester Based Fluids for Turbine Lubrication, Specification for (05.02) |
ANSI/ASTM D 4294-1998 |
用非色散X射线荧光光谱分析法测定石油产品中硫含量的试验方法 |
Sulfur in Petroleum Products by Non-Dispersive X-Ray Fluorescence Spectrometry, Method of Test for (05.02) |
ANSI/ASTM D 4298-1991 |
确定溯源性的比对渗透管指南 |
Guide for Intercomparing Permeation Tubes to Establish Traceability |
ANSI/ASTM D 4302-1995 |
在低温和轻负载条件下用气线和操作燃料火星点火内燃引擎磨损和沉积结构 抑制自动引擎油评估的试验方法 |
Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustions Engine Fueled with Gasline and Operated under Low-Temperature, Light-Duty Conditions (06.02) |
ANSI/ASTM D 4304-1984 |
汽轮机或蒸气轮机用矿物润滑油的规范 |
Mineral Lubricating Oil Used in Steam or Gas Turbines, Specification for (05.02) |
ANSI/ASTM D 4305-1994 |
低温下航空燃料滤膜流动的试验方法 |
Filter Flow of Aviation Fuels at Low Temperature, Method of Test for (05.02) |
ANSI/ASTM D 4306-2001 |
由痕量污染引起的试验航空燃料取样的操作规范 |
Practice for Sampling Aviation Fuel for Tests Affected by Trace Contamination (05.02) |
ANSI/ASTM D 4307-1994 |
用作分析标准的液态混合物制备的实施规程 |
Preparation of Liquid Blends for Use as Analytical Standards, Practice for (05.02) |
ANSI/ASTM D 4308-1995 |
用精密仪表对液态烃电导率的测试方法 |
Electrical Conductivity of Liquid Hydrocarbons by Precision Meter, Test Method for (05.02) |
ANSI/ASTM D 4309-2002 |
为测定水中总金属含量而使用密闭容器微波加热技术分解样品的实施规范 |
Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water |
ANSI/ASTM D 4310-1983 |
抑制机油淤泥和腐蚀趋势测定的试验方法 |
Sludging Tendencies of Inhibited Mineral Oils, Test Method for the Determination of the (05.02) |
ANSI/ASTM D 4314-1995 |
重负载和超重负载交叉链环的氯磺化聚乙烯电线和电缆护套的通用规范 |
Specification for General Purpose Heavy-Duty and Extra-Heavy-Duty Crosslinked Chlorosulfonated Polyethylene Jackets for Wire and Cable (10.02) |
ANSI/ASTM D 4321-1991 |
塑料薄膜包装能力的试验方法 |
Test Method for Package Yield of Plastic Film (08.02) |
ANSI/ASTM D 4323-1992 |
通过反射变化的比率对空气中硫化氢的试验方法 |
Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance |
ANSI/ASTM D 4340-1998 |
在排热条件下发动机冷却剂中铸造铝合金腐蚀性的试验方法 |
Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions |
ANSI/ASTM D 4349-1989 |
聚苯撑乙醚材料的规格 |
Specification for Polyphenylene Ether (PPE) Materials (08.03) |
ANSI/ASTM D 4350-1986 |
塑料和填料的腐蚀性指数的测试方法 |
Plastics and Fillers, Test Method for Corrositivity Index of (08.03) |
ANSI/ASTM D 4352-1997 |
电气级氧化镁中磁性材料杂质测定用试验方法 |
Test Method for Determination of Magnetic Material Impurities in Electrical Grade Magnesium Oxide |
ANSI/ASTM D 4356-1997 |
建立一致性试验方法公差的实施规范 |
Practice for Establishing Consistent Test Method Tolerances |
ANSI/ASTM D 4357-1985 |
粗纱和线纱玻璃织物制塑料层压制品规格 |
Plastic Laminates Made from Woven Roving and Woven Yarn Glass Fabrics, Specification for (08.03) |
ANSI/ASTM D 4364-1994 |
用聚集自然阳光法实施塑料加速室外气候老化的实施规程 |
Practice for Performing Accelerated Outdoor Weathering of Plastics Using Concentrated Natural Sunlight (08.03) |
ANSI/ASTM D 4376-1998 |
蒸汽脱脂级四氯乙烯规范 |
Specification for Vapor-Degreasing Grade Perchloroethylene |
ANSI/ASTM D 4377-1993 |
原油滴定中水的试验方法 |
Test Method for Water in Crude Oils (Karl Fischer) Titration (05.02) |
ANSI/ASTM D 4378-1992 |
蒸气和燃气轮机用矿物轮机油的运转中监测 |
In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines (05.02) |
ANSI/ASTM D 4385-1995 |
热固增强塑料产品视觉缺陷分级的实施规程 |
Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products (94-3, Items 58, 100) (08.03) |
ANSI/ASTM D 4392-1993 |
塑料曝露用耐水和耐光仪表(荧光UV-冷凝型)的操作规程 |
Practice for Operating Light-and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Plastics (08.03) |
ANSI/ASTM D 4396-1992 |
无压管道产品(X-15-358)的硬质聚氯乙烯(PVC)和有关塑料化合物的规范 |
Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04) |
ANSI/ASTM D 4397-1991 |
建筑、工业和农业用聚乙烯板材规格 |
Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications (08.03) |
ANSI/ASTM D 4413-2001 |
工作场所空气中环氧乙烷测定的试验方法(活性碳管法) |
Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology) |
ANSI/ASTM D 4418-1988 |
燃气轮机接收、存储与处理的实施规程 |
Receipt, Storage, and Handling of Fuels for Gas Turbines, Practice for (05.02) |
ANSI/ASTM D 4419-1990 |
用差分扫描热量计测定石油蜡转变温度的试验方法 |
Test Method for Determination of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (05.02) |
ANSI/ASTM D 4420-1989 |
用气相色谱法测定汽油成品中芳香化合物的试验方法 |
Test Method for Aromatics in Finished Motor Gasoline by Gas Chromatography (05.02) |
ANSI/ASTM D 4421-1994 |
石油焦化易挥发物的试验方法 |
Test Method for Volatile Matters in Petroleum Coke (05.02) |
ANSI/ASTM D 4422-1994 |
石油焦化分析灰分的试验方法 |
Test Method for Ash in Analysis of Petroleum Coke (05.02) |
ANSI/ASTM D 4423-1991 |
测定C4烃中羰基的试验方法 |
Test Method for Determination of Carbonyls in C4 Hydrocarbons (05.02) |
ANSI/ASTM D 4424-1990 |
用气相色谱法分析丁烯的试验方法 |
Test Method for Butylene Analysis by Gas Chromatography (05.02) |
ANSI/ASTM D 4425-1990 |
离心法从润滑脂中分离油的试验方法(Koppers法) |
Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method) (05.02) |
ANSI/ASTM D 4430-2001 |
测定气象测量的操作可比性的实施规程 |
Practice for Determining the Operational Comparability of Meteorological Measurements |
ANSI/ASTM D 4440-2001 |
使用动态机械程序流变测量多聚体融合物的实施规程 |
Practice for Rheological Measurement of Polymer Melts Using Dynamic Mechanical Procedures (08.03) |
ANSI/ASTM D 4441-1991 |
聚四氟乙烯的水溶液扩散性的规范 |
Specification for Aqueous Dispersions of Polytetrafluorethylene (08.03) |
ANSI/ASTM D 4445-1996 |
控制未处理木材的变色和形状用杀菌剂的试验方法(实验室法) |
Method for Testing Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
ANSI/ASTM D 4446-1996 |
暴露在液态水环境下未处理木材的膨胀差和防水配方的抗膨胀效率测定的试验方法 |
Test Method for Determining the Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood when Exposed to Liquid Water Environments |
ANSI/ASTM D 445-1994 |
透明和不透明液体运动粘度的试验方法(和动粘度的计算) |
Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity), Method of Test for (05.01) (10.03) |
ANSI/ASTM D 446-1989 |
玻璃毛细管运动粘度计的使用说明和试验方法 |
Operating Instructions for Glass Capillary Kinematic Viscometers, Test Method for (05.01) |
ANSI/ASTM D 4470-1997 |
静电起电的试验方法 |
Test Method for Static Electrification (10.02) |
ANSI/ASTM D 4473-2001 |
使用动态机械特性对热固树脂弯曲特性的测量 |
Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03) |
ANSI/ASTM D 4474-1991 |
苯乙烯热塑塑料弹性注模和挤压材料的规格 |
Specification for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (08.03) |
ANSI/ASTM D 4477-1997 |
硬质PVC拱面规范 |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Soffit (08.04) |
ANSI/ASTM D 4485-2001 |
引擎油性能规范 |
Specification for Performance of Engine Oils |
ANSI/ASTM D 4486-1991 |
挥发性和活性液体动粘度的试验方法 |
Test Method for Kinematic Viscosity of Volatile and Reactive Liquids (05.02) |
ANSI/ASTM D 4490-1996 |
用探测管测量有毒气体或蒸气浓度的实施规程 |
Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
ANSI/ASTM D 4495-1995 |
用落锤法对聚氯乙烯刚性外形抗冲击性的试验方法 |
Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight (08.04) |
ANSI/ASTM D 4508-1992 |
塑料小片冲击强度的测试方法 |
Test Methods for Chip Impact Strength of Plastics (08.03) |
ANSI/ASTM D 4509-1997 |
测定新吹净PET(生产环境测试)瓶的24小时气室乙醛含量的试验方法 |
Test Methods for Determining the 24-Hour Gas (Air) Space Acetaldehyde Content of Freshly Blown PET Bottles |
ANSI/ASTM D 4514-1995 |
断裂带规范 |
Specification for Friction Tape (10.02) |
ANSI/ASTM D 4515-2001 |
估算含有机组分的水样品保持时间的实施规程 |
Practice for Estimation of Holding Time for Water Samples Containing Organic Constituents |
ANSI/ASTM D 4529-1995 |
评定航空燃料燃烧净热值的测试方法 |
Estimation of Net Heat of Combustion of Aviation Fuels, Test Method for (05.02) |
ANSI/ASTM D 4530-1985 |
石油产品残留微粒碳的测试方法 |
Micro Carbon Residue of Petroleum Products, Test Method for (05.02) |
ANSI/ASTM D 4532-1992 |
工作场所大气中可吸入灰尘的试验方法 |
Test Method for Respirable Dust in Workplace Atmospheres |
ANSI/ASTM D 4539-1994 |
通过低温流动试验对柴油燃料的可滤性的试验方法 |
Test Method for Filterability of Diesel Fuels by the Low Temperature Flow Test (Lift) Method (05.02) |
ANSI/ASTM D 4549-1985 |
聚苯乙烯模塑和挤压材料规范(PS) |
Specification for Polystyrene Molding and Extrusion Materials (PS) (95-1, Item 24) (08.03) |
ANSI/ASTM D 4550-1992 |
热塑醚.酯类弹性体规范 |
Specification for Thermoplastic Elastomer-Ether-Ester (TEEE) (08.03) |
ANSI/ASTM D 4551-2001 |
聚氯乙烯塑料柔性隐蔽式含水薄膜的规范 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane (08.04) |
ANSI/ASTM D 4565-1994 |
远程通信用电线和电缆绝缘和外壳的物理和环境性能特性的试验方法 |
Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
ANSI/ASTM D 4566-1994 |
电信电线和电缆护套及绝缘的电操作性能的测试方法 |
Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable (10.02) |
ANSI/ASTM D 4568-1993 |
评价电缆填充物和溢流件和聚烯烃线和电缆材料之间兼容性的试验方法 |
Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials (10.02) |
ANSI/ASTM D 4591-2001 |
用差式扫描比色仪对荧光聚合物过渡期温度和热量测定的试验方法 |
Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
ANSI/ASTM D 4597-1992 |
活性碳扩散取样器收集有机气体或蒸气的工作场所大气取样实施规程 |
Practice for Sampling Workplace Atmospheres to Collect Organic Gases or Vapors with Activated Charcoal Diffusional Samplers |
ANSI/ASTM D 4600-1995 |
测定工作场所中可溶性苯颗粒物的方法 |
Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres |
ANSI/ASTM D 4603-1997 |
测定聚对苯二甲酸乙二醇酯的固有粘度的测试方法 |
Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) (08.03) |
ANSI/ASTM D 4624-1993 |
在高温和高剪切率条件下用毛细管粘度计测量表面粘度的测试方法 |
Measuring Apparent Viscosity by Capillary Viscometer at High Temperature and High Shear Rates, Test Method for (05.02) |
ANSI/ASTM D 4625-1992 |
在43℃(110°F)时测试馏出燃料存储稳定性的方法 |
Distillate Fuel Storage Stability at 43C (110F), Test Method for (05.02) |
ANSI/ASTM D 4626-1995 |
气相色谱法响应因数的计算规程 |
Calculation of Gas Chromatographic Response Factors, Practice for (05.02) |
ANSI/ASTM D 4627-1992 |
水溶性金属加工液的铁屑腐蚀试验 |
Water Soluble Metal Working Fluids, Iron Chip Corrosion Test for (05.02) |
ANSI/ASTM D 4628-1996 |
利用原子吸收光谱学分析报废的润滑油中钡、钙、锰和锌的试验方法 |
Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry, Method for (05.02) |
ANSI/ASTM D 4629-1997 |
用氧化燃烧和化学发光检测法测定液态石油烃中有机痕量氮的试验方法 |
Test Method for Organically Bound Trace Nitrogen in Liquid Petroleum Hydrocarbons by Oxidative Combustion and Chemiluminescence Detection (05.02) |
ANSI/ASTM D 4634-1986 |
苯乙烯-马来酐材料规格 |
Styrene-Maleic Anhyride Materials (S/MA), Specification for (08.03) |
ANSI/ASTM D 4635-2001 |
一般和包装使用的低密度聚乙烯膜规范 |
Specification for Low-Density Polyethylene Films for General Use and Packaging Applications (08.03) |
ANSI/ASTM D 4636-1986 |
液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性的试验方法 |
Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils, Test Method for (05.03) |
ANSI/ASTM D 4659-1993 |
测定聚氨基甲酸乙酯-异氰酸盐原料比重的试验方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Specific Gravity, Method for Testing (11.01) |
ANSI/ASTM D 4660-1990 |
测定聚氨酯异氰酸盐原料同分异构体含量的测试方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Isometer Content, Method for Testing (08.03) |
ANSI/ASTM D 4661-1992 |
测定聚氨酯异氰酸盐原料总氯含量的测试方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Total Chlorine, Method for Testing (08.03) |
ANSI/ASTM D 4662-1993 |
测定聚氨基甲酸乙酯原料酸碱度的试验方法 |
Polyurethane Raw Materials, Determination of Acid and Alkalinity Numbers of Polyors, Method for Testing (08.03) |
ANSI/ASTM D 4663-1992 |
测定聚氨酯异氰酸盐原料水解氯的测试方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Hydrolyzable Chlorine, Method for Testing (08.03) |
ANSI/ASTM D 4667-1987 |
测定聚氨酯异氰酸盐原料酸性的测试方法 |
Polyurethane-Isocyanate Raw Materials, Determination of Acidity, Method for Testing (08.03) |
ANSI/ASTM D 4669-1993 |
测定聚氨基甲酸乙酯原料比重的试验方法 |
Polyurethane Raw Materials, Determination of Specific Gravity of Polyels, Method for Testing (08.03) |
ANSI/ASTM D 4670-1992 |
测定聚氨酯多醇原料悬浮物的测试方法 |
Urethane-Polyol Raw Materials, Determination of Suspended Matter, Method for Testing (08.03) |
ANSI/ASTM D 4671-1987 |
聚氨酯原材料的试验方法:多醇不饱和度的测定 |
Polyurethane Raw Materials, Determination of Unsaturation of Polyols, Method for Testing (08.03) |