标准号 |
中文名称 |
英文名称 |
| ANSI/ASTM D 3561-2002 |
用离子吸收光谱法测试微咸水、海水和盐水中的锂、钾和钠离子的方法 |
Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry |
| ANSI/ASTM D 3567-1991 |
增强热固树脂管和配件的尺寸的测定方法(08.04) |
Practice for Determining Dimensions of Reinforced Thermosetting Resin Pipe (RTRP) and Fittings (08.04) |
| ANSI/ASTM D 3575-2001 |
由烯烃聚合物生产的柔性多孔材料的试验方法 |
Test Methods for Flexible Cellular Materials Made from Olefin Polymers |
| ANSI/ASTM D 3576-1994 |
硬质多孔塑料的孔径的试验方法(08.02) |
Test Method for Cell Size of Rigid Cellular Plastics (08.02) |
| ANSI/ASTM D 3590-2002 |
水中克耶达(Kjeldahl)氮总含量的试验方法 |
Test Methods for Total Kjeldahl Nitrogen in Water |
| ANSI/ASTM D 3595-1991 |
聚三氟氯乙烯挤塑薄板和薄膜规范(08.03) |
Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film (08.03) |
| ANSI/ASTM D 3596-2001 |
通用聚氯乙烯树脂中凝胶的实施规程(08.03) |
Practice for Determination of Gels (Fisheyes) in General-Purpose Poly(Vinyl Chloride) (PVC) Resins |
| ANSI/ASTM D 3601-1988 |
含水介质中的泡沫(瓶试验)方法(05.02) |
Foam in Aqueous Media (Bottle Test), Test Method for (05.02) |
| ANSI/ASTM D 3602-1990 |
航空涡轮燃料的水分离特性(现场试验)试验(05.02) |
Water Separation Characteristics of Aviation Turbine Fuels (Field Test), Test for (05.02) |
| ANSI/ASTM D 3603-1993 |
在有水的情况下蒸气涡轮油的防锈特性试验方法(卧式圆盘法)(05.02) |
Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method), Test for (05.02) |
| ANSI/ASTM D 3605-1991 |
用原子吸收和喷焰光谱法测定燃气涡轮机燃料中痕量金属的试验方法(05.02) |
Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy (05.02) |
| ANSI/ASTM D 3606-1992 |
用气相色谱法测定机动车和航空用汽油中苯和甲苯的试验方法(05.02) |
Test Method for Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography (05.02) |
| ANSI/ASTM D 3607-1985 |
用剥离法除去用过的机油中挥发性污物的试验方法(05.02) |
Removing Volatile Contaminants from Used Engine Oils by Stripping (05.02) |
| ANSI/ASTM D 3609-2001 |
渗透管校准技术的实施规程 |
Practice for Calibration Techniques Using Permeation Tubes |
| ANSI/ASTM D 3614-1990 |
实验室进行抽样、空气分析和排放的指南 |
Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions |
| ANSI/ASTM D 3631-2001 |
测量表面大气压的试验方法 |
Test Methods for Measuring Surface Atmospheric Pressure |
| ANSI/ASTM D 3634-1999 |
测定发动机冷却剂中痕量氯离子的试验方法 |
Test Method for Trace Chloride Ion in Engine Coolants |
| ANSI/ASTM D 3636-1995 |
实心绝缘材料的抽样和质量评定(05.02) |
Sampling and Judging Quality of Solid Electrical Insulating Materials (10.02) |
| ANSI/ASTM D 3651-2002 |
微咸水、海水和盐水中的钡离子的测试方法 |
Test Method for Barium in Brackish Water, Seawater, and Brines |
| ANSI/ASTM D 3675-2001 |
用辐射热能源测定柔性多孔材料的表面易燃性的试验方法 |
Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
| ANSI/ASTM D 3676-2001 |
地毯或地毯垫衬用橡胶多孔垫层规范 |
Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay |
| ANSI/ASTM D 3678-2001 |
硬质聚氯乙烯内定形挤压件规范 |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior Profile Extrusions (08.04) |
| ANSI/ASTM D 3679-1995 |
硬质聚氯乙烯边缘修整规范(08.04) |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding (08.04) |
| ANSI/ASTM D 368-1996 |
杂酚油及油质防腐剂比重的试验方法 |
Test Method for Specific Gravity of Creosote and Oil-Type Preservatives |
| ANSI/ASTM D 3681-2001 |
在偏转条件下纤维玻璃(玻璃纤维增强树脂)管耐化学性的试验方法(08.04) |
Test Method for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition (08.04) |
| ANSI/ASTM D 3685/D 3685M-2001 |
烟气中颗粒物的取样和测定的试验方法 |
Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| ANSI/ASTM D 3687-2001 |
用活性碳管吸收法收集的有机化合物蒸汽的分析规程 |
Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| ANSI/ASTM D 369-1996 |
杂酚油馏份与残渣比重的测试方法 |
Test Method for Specific Gravity of Creosote Fractions and Residues |
| ANSI/ASTM D 3698-1996 |
溶剂蒸气脱脂操作实施规程 |
Practice for Solvent Vapor Degreasing Operations |
| ANSI/ASTM D 3699-1992 |
煤油规范(05.02) |
Kerosine, Specification for (05.02) |
| ANSI/ASTM D 370-1996 |
油质防腐剂脱水作用的试验方法 |
Test Method for Dehydration of Oil-Type Preservatives |
| ANSI/ASTM D 3700-2001 |
用浮动活塞缸获取液态烃样品的试验 |
Hydrocarbon Fluid Samples Using a Floating Piston Cylinder, Test for Obtaining (05.02) |
| ANSI/ASTM D 3701-2001 |
低分辨核磁共振光谱法测定航空涡轮机燃料中氢含量的试验方法 |
Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry (05.02) |
| ANSI/ASTM D 3702-1994 |
用止推垫圈试验机测定在非润滑摩擦接触中材料的磨损率的试验(05.02) |
Wear Rate of Materials in Unlubricated Rubbing Contact Using a Thrust Washer Testing Machine, Test for (05.02) |
| ANSI/ASTM D 3703-1992 |
航空涡轮燃料的过氧化物的数量的试验(05.02) |
Peroxide Number of Aviation Turbine Fuels, Test for (05.02) |
| ANSI/ASTM D 3704-1990 |
在震荡运动中用润滑剂耐热耐压试验机测定润滑脂的耐磨损特性的试验(05.02) |
Wear Preventive Properties of Lubrication Greases Using the (Falex) Ring and Block Test Machine in Oscillating Motion, Test for (05.02) |
| ANSI/ASTM D 3707-1989 |
用烘炉试验法测定油中含水乳液的存储稳定性的试验方法(05.02) |
Storage Stability of Water-in-Oil Emulsions by the Oven Test Method, Test Method for (05.02) |
| ANSI/ASTM D 3709-1989 |
低于室温循环条件下的油中含水乳液的稳定性的试验方法(05.02) |
Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions, Test Method for (05.02) |
| ANSI/ASTM D 3710-1988 |
用气相色谱法测定汽油和汽油馏份的沸点范围分布的试验方法(05.02) |
Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography, Test Method for (05.02) |
| ANSI/ASTM D 3711-1995 |
薄膜液体和蒸气的沉积趋势的试验方法(05.02) |
Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (05.02) |
| ANSI/ASTM D 3712-1991 |
用液相色谱法分析可溶性石油硫化盐的方法(05.02) |
Method for Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography (05.02) |
| ANSI/ASTM D 374-1994 |
固体电绝缘材料厚度的测试方法 |
Test Methods for Thickness of Solid Electrical Insulation (10.01) |
| ANSI/ASTM D 3748-1994 |
评价高密度硬性多孔热塑料的实施规程(08.02) |
Practice for Evaluating High Density Rigid Cellular Thermoplastics (08.02) |
| ANSI/ASTM D 3749-1995 |
用液上气相色谱法测定聚乙烯树脂中残留乙烯单体的试验方法(08.03) |
Test Method for Residual Vinyl Chloride Monomer in Poly (Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique (08.03) |
| ANSI/ASTM D 374M-1994 |
固体电绝缘材料厚度的测试方法(米制) |
Test Methods for Thickness of Solid Electrical Insulation (Metric) (10.01) |
| ANSI/ASTM D 3754-2001 |
纤维玻璃污水管和工业用压力管规范(08.04) |
Specification for Fiberglass Sewer and Industrial Pressure Pipe (08.04) |
| ANSI/ASTM D 3763-1986 |
用载荷-位移传感器测定塑料的高速刺穿特性的试验方法(08.03) |
Plastics Using Load and Displacement Sensors, Test Method for High-Speed Puncture Properties of (08.03) |
| ANSI/ASTM D 3764-2001 |
工业生产液流分析仪校验的实施规范 |
Validation of Process Stream Analyzers, Practice for (05.02) |
| ANSI/ASTM D 3795-1980 |
用转矩流变仪测定热固性塑料的热流量和固化特性的试验方法(15.04) |
Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04) |
| ANSI/ASTM D 3796-1990 |
S型皮氏流量测定管的校准实施规程 |
Practice for Calibration of Type-S Pitot Tubes |
| ANSI/ASTM D 381-2001 |
用射流蒸发法测定燃料中现存煤末的试验方法 |
Existent Gum in Fuels by Jet Evaporation, Method of Test for (05.01) |
| ANSI/ASTM D 3825-1990 |
用快速发泡技术测定动态表面张力的试验方法(15.02) |
Test Method for Dynamic Surface Tension by the Fast Bubble Technique (15.02) |
| ANSI/ASTM D 3826-1998 |
用张力测定可降解的聚烯烃中降解末端点的实施规程 |
Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile |
| ANSI/ASTM D 3827-1992 |
石油和其他有机液体中气体的可溶解性的评估方法(05.02) |
Solubility of Gases in Petroleum and Other Organic Liquids, Method for Estimation of (05.02) |
| ANSI/ASTM D 3828-1987 |
用Setaflash闭合试验机测定闪点的试验(05.02) |
Flash Point by Setaflash Closed Tester, Test for (05.02) |
| ANSI/ASTM D 3829-1993 |
机油的边界泵送温度的预测试验(05.02) |
Predicting the Borderline Pumping Temperature of Engine Oil, Test for (05.02) |
| ANSI/ASTM D 3831-2001 |
用原子吸收光谱测定法测定汽油中锰的含量的试验(05.02) |
Manganese in Gasoline by Atomic Absorption Spectrometry, Test for (05.02) |
| ANSI/ASTM D 3835-1995 |
用毛细管流变器测定热塑料的流变性能的试验方法(08.03) |
Test Method for Measuring the Rheological Properties of Thermoplastics with a Capillary Rheometer (08.03) |
| ANSI/ASTM D 3840-2001 |
非压力下用增强塑料砂浆管配件规范(08.04) |
Specification for Reinforced Plastic Mortar Pipe Fittings for Non-Pressure Applications (08.04) |
| ANSI/ASTM D 3841-2001 |
玻璃纤维增强聚酯塑料板规范 |
Specification for Glass Fiber-Reinforced Polyester Plastic Panels (08.04) |
| ANSI/ASTM D 3844-1996 |
卤化烃溶剂容器标记实施规程 |
Practice for Labeling Halogenated Hydrcarbon Solvent Containers |
| ANSI/ASTM D 3850-1994 |
热重分析仪对固体电绝缘材料快速热降解的试验方法 |
Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (10.02) |
| ANSI/ASTM D 3856-1995 |
水取样和分析实验室中良好实验室实施规程指南 |
Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water |
| ANSI/ASTM D 3861-1998 |
薄膜过滤器中水的可萃取物质量的试验方法 |
Test Method for Quantity of Water-Extractable Matter in Membrane Filters |
| ANSI/ASTM D 3864-1996 |
水分析连续在线监测系统指南 |
Guide for Continual On-Line Monitoring Systems for Water Analysis |
| ANSI/ASTM D 3865-2002 |
水中钚的试验方法 |
Test Method for Plutonium in Water |
| ANSI/ASTM D 3866-2002 |
水中银的试验方法 |
Test Methods for Silver in Water |
| ANSI/ASTM D 3873-2001 |
氨铜砷酸盐溶液的砷化合物化合价状态的试验方法 |
Test Method for Valency State of the Arsenic Component of Ammoniacal Copper Arsenate Solutions |
| ANSI/ASTM D 3894-1988 |
用小角结构对硬质多孔塑料耐火性能的评定方法 |
Method for Evaluation of Fire Response of Rigid Cellular Plastics Using a Small Corner Configuration (08.03) |
| ANSI/ASTM D 3895-1995 |
差别扫描量热法测定聚烯烃氧化感应时间的试验方法 |
Test Method for Oxidative Induction Time of Polyolefins by Thermal Analysis (08.03) |
| ANSI/ASTM D 390-1996 |
海上、陆地及淡水中用木桩、电杆和木材的防腐处理用煤焦油杂酚油规范 |
Specification for Coal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbers of Marine, Land, and Fresh Water Use |
| ANSI/ASTM D 3904-1990 |
从油页岩中提取油的试验方法(用USBM费歇尔分析法) |
Test Method for Oil from Oil Shale (Resource Evaluation by the USBM Fischer Assay Procedure) (05.02) |
| ANSI/ASTM D 3915-1992 |
压力塑料管和配件用刚性聚氯乙烯(PVC)和氯化聚氯乙烯复合物规范 |
Specification for Poly (Vinyl Chloride) (PVC) and Related Plastic Pipe and Fitting Compounds (08.04) |
| ANSI/ASTM D 3916-1994 |
挤拔玻璃纤维增强塑料棒张力特性的试验方法 |
Test Method for Tensile Properties of Pultruded Glass Fiber-Reinforced Plastic Rod (08.02) |
| ANSI/ASTM D 3917-1994 |
热固玻璃纤维增强塑料挤拔型材的尺寸公差规格 |
Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes (08.02) |
| ANSI/ASTM D 3935-1994 |
聚碳酸酯非填充和加固材料规范 |
Specification for Polycarbonate (PC) Unfilled and Reinforced Materials (08.02) |
| ANSI/ASTM D 3944-1988 |
石油蜡凝点 |
Solidification Point of Petroleum Wax (05.02) |
| ANSI/ASTM D 3945-1986 |
用柴油机喷嘴对含有液体聚合物的剪切应力稳定性的试验方法 |
Shear Stability of Polymer-Containing Fluids, Using a Diesel Injection Nozzle, Test Method for (05.02) |
| ANSI/ASTM D 3946-1992 |
评价馏出水金属加工液抗菌性的试验方法 |
Bioresistance of Water-Soluble Metal-Working Fluids (05.02) |
| ANSI/ASTM D 3948-1987 |
用便携式分类计测定航空燃气涡轮发动机用燃料脱水特性的试验方法 |
Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer, Field Test Method for (05.02) |
| ANSI/ASTM D 3949-1994 |
电绝缘用涂覆玻璃织物规范 |
Specification for Coated Glass Fabrics Used for Electrical Insulation (10.02) |
| ANSI/ASTM D 3955-1995 |
电气绝缘清漆规范 |
Specification for Electrical Insulating Varnishes (10.02) |
| ANSI/ASTM D 396-1992 |
燃料油规范 |
Fuel Oils, Specification for (05.01) |
| ANSI/ASTM D 3965-1994 |
管和配件用刚性丙烯腈-丁二烯-苯乙烯共聚物规格 |
Specification for Rigid Acrylonitrile Butadiene-Styrene (ABS) Compounds for Pipe and Fittings (08.03, 08.04) |
| ANSI/ASTM D 3972-2002 |
用放射化学法进行水中同位素铀的试验方法 |
Test Method for Isotopic Uranium in Water by Radiochemistry |
| ANSI/ASTM D 3975-1999 |
沉积物分析方法的联合实验室试验用样品的研发与使用(制备)实施规程 |
Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments |
| ANSI/ASTM D 3976-1996 |
化学分析用沉积样品制备的实施规程 |
Practice for Preparation of Sediment Samples for Chemical Analysis |
| ANSI/ASTM D 3981-1989 |
通用和包装用中密度聚乙烯薄膜规格 |
Specification for Medium-Density Polyethylene Films for General Use and Packaging Applications (08.03) |
| ANSI/ASTM D 3982-1992 |
常规接触压模制玻璃纤维增强热固树脂护罩规格 |
Specification for Custom Contact-Pressure-Molded Glass-Fiber-Reinforced Thermosetting Resin Hoods (08.04) |
| ANSI/ASTM D 4000-1991 |
特殊用途塑料材料的分类系统 |
Classification System for Specifying Plastic Materials (08.03) |
| ANSI/ASTM D 4006-1981 |
用蒸馏法测定原油中的水含量 |
Water in Crude Oil by Distillation (05.03) |
| ANSI/ASTM D 4007-1981 |
用离心法测定原油中水和沉淀物的含量(实验室法) |
Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedures) (05.02) |
| ANSI/ASTM D 4019-1994 |
通过电量测定法对塑料中潮气的试验方法 |
Test Method for Moisture in Plastics by Coulometry (08.03) |
| ANSI/ASTM D 4020-1992 |
超高分子聚乙烯模压和挤压材料的规格 |
Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials (08.02) |
| ANSI/ASTM D 4024-1994 |
机器造纤维玻璃法兰规范 |
Specification for Reinforced Thermosetting Resin (Rtr) Flanges (08.04) |
| ANSI/ASTM D 4025-2001 |
地下注入水形成沉积物的检验和分析报告结果的实施规程 |
Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection |
| ANSI/ASTM D 4042-1992 |
碾油轧钢机扩散体中粉尘和总含铁量的取样及试验 |
Rolling Oils, Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of (05.03) |
| ANSI/ASTM D 4045-1992 |
利用氢解作用和速率计的色度术测试石油产品中的硫 |
Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry (05.02) |
| ANSI/ASTM D 4046-1991 |
用分光光度法对柴油机燃料中烷基硝酸盐的试验方法 |
Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (05.02) |
| ANSI/ASTM D 4047-1991 |
用喹啉磷钼酸盐法对润滑油及添加剂中磷含量的试验方法 |
Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method (05.02) |
| ANSI/ASTM D 4048-1991 |
用铜带生锈试验检测润滑油对铜腐蚀的方法 |
Method for Detection of Copper Corrosion from Lubricating Grease by the Copper Strip Tarnish Test (05.02) |
| ANSI/ASTM D 4049-1993 |
润滑脂耐水喷洒性的试验方法 |
Resistance of Lubricating Grease to Water Spray, Test Method for (05.02) |
| ANSI/ASTM D 4051-1989 |
低压气体混合物制备方法 |
Preparation of Low-Pressure Gas Blends, Method for (05.02) |
| ANSI/ASTM D 4052-1996 |
用数字式密度计测定液体密度和相对密度的试验方法 |
Test Method for Density and Relative Density of Liquids by Digital Density Meter (05.02) |
| ANSI/ASTM D 4053-1991 |
用火焰分光光度计对机动车和航空汽油中苯的试验方法 |
Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy (05.02) |
| ANSI/ASTM D 4054-1981 |
添加航空涡轮燃料和飞行器燃料系统材料的兼容性评价 |
Evaluating the Compatability of Additives with Aviation Turbine Fuels and Aircraft Fuel System Materials (05.02) |
| ANSI/ASTM D 4055-2001 |
薄膜过滤法测定戊烷不溶性 |
Pentane Insolubles by Membrane Filtration (05.02) |
| ANSI/ASTM D 4056-2001 |
烃类和脂肪族脂化润滑剂中水的可溶性 |
Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants (05.02) |
| ANSI/ASTM D 4057-1988 |
石油及石油产品人工取样 |
Manual Sampling of Petroleum and Petroleum Products (05.02) |
| ANSI/ASTM D 4064-2001 |
通过热过程对功能孔的保存处理的操作规程 |
Practice for Preservative Treatment of Utility Poles by the Thermal Process |
| ANSI/ASTM D 4065-2001 |
塑料动态机械特性测定和报告规程 |
Practice for Determining and Reporting Dynamic Mechanical Properties of Plastics (08.03) |
| ANSI/ASTM D 4066-1995 |
尼龙注塑和挤压材料的规范 |
Specification for Nylon Injection and Extrusion Materials (PA) (08.02) |
| ANSI/ASTM D 4067-1990 |
增强和填入聚亚苯基硫化物注射模塑和挤压材料的规格 |
Specification for Reinforced and Filled Polyphenylene Sulfide Injection Molding and Extrusion Materials (08.03) |
| ANSI/ASTM D 4068-2001 |
隐含水密封薄板用氯化聚乙烯薄板规范 |
Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane (08.04) |
| ANSI/ASTM D 4092-2001 |
与塑料动力机械测量有关的术语的描述和定义 |
Definitions and Description of Terms Relating to Dynamic Mechanical Measurements on Plastics (08.03) |
| ANSI/ASTM D 4093-1991 |
透明和半透明塑性材料双折射及残余应变的光弹性测量的试验方法 |
Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials (08.02) |
| ANSI/ASTM D 4096-1991 |
大气中总悬浮颗粒测定的试验方法 |
Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High Volume Sampler Method) |
| ANSI/ASTM D 4097-2001 |
纤维玻璃增强的热固树脂耐化学药品罐的规范 |
Specification for Conduct Molded Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D 4099-1989 |
上等聚氯乙烯窗户规格 |
Specification for Poly(Vinyl Chloride) (PVC) Prime Windows (08.04) |
| ANSI/ASTM D 4101-2001 |
丙烯塑料注塑和挤压材料规范 |
Propylene Plastic Injection and Extrusion Materials, Specification for (08.03) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com