标准号 |
中文名称 |
英文名称 |
| ANSI/EIA 469-C-1997 |
高可靠性瓷介质单片电容器的破坏性物理分析 |
Destructive Physical Analysis of High-Reliability Ceramic Monolithic Capacitors |
| ANSI/EIA 471-1995 |
静电敏感装置的符号和标签 |
Symbol and Label for Electrostatic Sensitive Devices |
| ANSI/EIA 473-1981 |
电子设备用继电器的定义和术语 |
Relays for Electronic Equipment, Definitions and Terminology for |
| ANSI/EIA 475C000-1989 |
FSMA型连接器分规范 |
Sectional Specification for Type FSMA Connectors |
| ANSI/EIA 475CA00-1989 |
FSMA型光纤光缆连接器装置空白详细规范.1类环境 |
Blank Detail Specification Connector Set for Optical Fibers and Cables, Type FSMA: Environmental Category I |
| ANSI/EIA 475CB00-1989 |
FSMA型光纤光缆连接器装置空白详细规范.2类环境 |
Blank Detail Specification Connector Set for Optical Fibers and Cables, Type FSMA: Environmental Category II |
| ANSI/EIA 475CC00-1989 |
FSMA型光纤光缆连接器装置空白详细规范.3类环境 |
Blank Detail Specification Connector Set for Optical Fibers and Cables, Type FSMA: Environmental Category Ill |
| ANSI/EIA 477-A-1990 |
人造石英 |
Cultured Quartz |
| ANSI/EIA 479-A-1993 |
50/60Hz倍压器电源的薄膜纸介质和薄膜介电电容器 |
Film-Paper, Film Dielectric Capacitors for 50/60 Hz Voltage Doubler Power Supplies |
| ANSI/EIA 480-1981 |
扳钮开关 |
Toggle Switches |
| ANSI/EIA 481-1-1990 |
自动定位用表面安装件的包装带 |
Taping of Surface-Mount Components for Automatic Placement |
| ANSI/EIA 481-2-1991 |
自动装配表面安装件的16mm和24mm带式包装 |
16-mm and 24-mm Embossed Carrier Taping of Surface Mount Components for Automatic Handling |
| ANSI/EIA 481-3-1991 |
自动装配表面安装件的32mm、44mm和56mm带式包装 |
32-mm, 44-mm, and 56-mm Embossed Carrier Taping of Surface-Mount Components for Automatic Handling |
| ANSI/EIA 481-B-2001 |
自动处理用表面固定件的8mm-200mm凸式传送带与8mm和12mm打孔传送带 |
8 mm through 200 mm Embossed Carrier Taping and 8 mm &12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling |
| ANSI/EIA 483-1981 |
高频多层陶瓷电容器有效串联电阻和电容的试验方法 |
Ceramic Capacitors at High Frequencies, Method of Test for Effective Series Resistance (ESR) and Capacitance for Multilayer |
| ANSI/EIA 484-A-1995 |
电子和机械界面特性和用在直接数字控制系统与用同步完全双向传输数字控制 设备之间系列数据链接的通信控制特性的线性控制协议 |
|
| ANSI/EIA 4899-2002 |
制备电子件管理计划标准 |
(Standard for Preparing an Electronic Components Management Plan ) |
| ANSI/EIA 4900-2002 |
利用超过制作特定温度范围的半导体器具 |
(Use of Semiconductor Devices Outside Manufacturers’ Specified Temperature Ranges ) |
| ANSI/EIA 492B000-1988 |
IV类单模光导纤维分规范 |
Sectional Specification for Class IV Single-Mode Optical Waveguide Fibers |
| ANSI/EIA 492BA00-1988 |
IVa级色散无漂移单膜光学波导纤维的空白详细规范. |
Blank Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Waveguide Fibers |
| ANSI/EIA 494-B-1992 |
用于NCM32位二进制CL(BCL)和7位ASCⅡCL(ACL)的输入格式 |
32-Bit Binary CL (BCL) and 7-Bit ASCII CL (ACL) Input Format for NCM |
| ANSI/EIA 495-A-1989 |
交流电用金属化纸电极薄膜介电电容器 |
Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications |
| ANSI/EIA 498AA00-1992 |
键盘开关的空白详细规范 |
Keyboard Switches, Blank Detail Specification for |
| ANSI/EIA 498AAAA-1992 |
短行键的详细规范 |
Detail Specification for Short Stroke Keypads |
| ANSI/EIA 500-A-1989 |
投影式阴极射线管X辐射测量的推荐规程 |
Measurement of X-Radiation from Projection Cathode Ray Tubes, Recommended Practice for |
| ANSI/EIA 501-A-1990 |
光栅扫描直观式数字显示阴极射线管X辐射测量的推荐规程 |
Measurement of X-Radiation from Raster-Scanned Direct-View Data Display Cathode Ray Tubes, Recommended Practice for |
| ANSI/EIA 503-A-1990 |
直观电视显像管X辐射测量的推荐规程 |
Measurement of X-Radiation from Direct View Television Picture Tubes, Recommended Practice for |
| ANSI/EIA 508-1987 |
电视广播发射机电气性能标准 |
Electrical Performance Standards for Television Broadcast Transmitters |
| ANSI/EIA 512-1-1990 |
1kHz至1GHz石英晶体振子等效电气参数测量的标准方法(ANSI/EIA 512-1985的补充件) |
Standard Methods for Measurement of the Equivalent Electrical Parameters of Quartz Crystal Units, 1 khz to 1 GHz (addendum to ANSI/EIA 512-1985) |
| ANSI/EIA 512-1985 |
1kHz至1GHz石英晶体振子等效电气参数测量的标准方法 |
Equivalent Electrical Parameters of Quartz Crystal Units, 1 kHz to 1 GHz, Standard Methods for Measurement of |
| ANSI/EIA 514-1985 |
电话排斥键接口 |
Telephone Exclusion-Key Interface |
| ANSI/EIA 5150000-1986 |
光学纤维和电缆分线器的一般规范 |
Generic Specification for Optical Fiber and Cable Splices |
| ANSI/EIA 515B000-1987 |
气密架空、埋设、地下光纤光缆接头盒的分规范 |
Sectional Specification for Splice Closures for Pressurized Aerial, Buried, and Underground Fiber Optic Cables |
| ANSI/EIA 5200000-D-2000 |
已质量认证的专用电机开关的总规范 |
Generic Specification for Special-Use Electromechanical Switches of Certified Quality |
| ANSI/EIA 520A000-A-1992 |
质量认证的按钮开关分规范 |
Sectional Specification for Pushbutton Switches of Certified Quality |
| ANSI/EIA 520AAAA-A-1991 |
单极接触式非灵敏按钮开关详细规范 |
Non-Sensitive Pushbutton Switch Single-Pole Contact, Detail Specification for |
| ANSI/EIA 520AAAB-A-1991 |
瞬时接触式非灵敏按钮开关详细规范 |
Detail Specification for Non-Sensitive Pushbutton Switch Momentary Contact |
| ANSI/EIA 520B000-1991 |
已质量认证的数字开关(指轮开关、按钮开关和传动杆开关)分规范 |
Digital Switches (Thumbwheel, Pushbutton, and Lever Actuated) of Certified Quality, Sectional Specification for |
| ANSI/EIA 520C000-1987 |
已质量认证的灵敏开关分规范 |
Sectional Specification: Sensitive Switches of Certified Quality |
| ANSI/EIA 520CA00-A-1992 |
已质量认证的专用灵敏开关空白详细规范 |
Special Use Sensitive Switches of Certified Quality Blank Detail Specification for |
| ANSI/EIA 520CAAA-A-1991 |
基本尺寸单开路触点灵敏开关的详细规范 |
Sensitive Switches, Single Break Contacts, Basic Size, Detail Specification for |
| ANSI/EIA 520CAAB-A-1991 |
小尺寸单开路触点灵敏开关的详细规范 |
Sensitive Switches, Single Break Contacts, Miniature Size, Detail Specification for |
| ANSI/EIA 520CAAC-A-1992 |
超小尺寸单开路触点灵敏开关详细规范 |
Sensitive Switches, Single-Break Contacts, Subminiature Size, Detail Specification for |
| ANSI/EIA 520CAAD-A-1992 |
超小尺寸7安培单开路触点灵敏开关详细规范 |
Sensitive Switches, Single-Break Contacts, Sub-Subminiature Size 7A, Detail Specification for |
| ANSI/EIA 520E000-A-2000 |
已质量认证的直插式开关分规范 |
Sectional Specification for In-Line Switches of Certified Quality |
| ANSI/EIA 520EAAC-1990 |
已质量认证的双列直插式开关详细规范 |
Detail Specification for Dual-In-Line Switches |
| ANSI/EIA 520EAAD-1990 |
升降滑动驱动双列直插式开关详细规范 |
Detail Specification on Dual-In-Line Package Switches, Raised and Recessed Slide-Actuated |
| ANSI/EIA 520F000-A-1996 |
已质量认证的旋转式开关分规范(2安培以下的低电流) |
Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less) |
| ANSI/EIA 520FA00-1992 |
已质量认证的专用旋转式开关空白详细规范 |
Blank Detail Specification for Special-Use Rotary Switches of Certified Quality |
| ANSI/EIA 520FAAA-1995 |
已质量认证的(低电流比率)12位置最大的旋转式开关的详细规范 |
Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum |
| ANSI/EIA 520FAAB-1995 |
已质量认证的(低电流比率)16位置最大的旋转式开关的详细规范 |
Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum |
| ANSI/EIA 521-1993 |
多层陶瓷电容器的应用指南.电气 |
Application Guide for Multilayer Ceramic Capacitors - Electrical |
| ANSI/EIA 526-2-1989 |
接入OFSTP-2单模光缆的发送器有效输出功率 |
OFSTP-2, Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable |
| ANSI/EIA 526-3-1989 |
FOTP-3光纤终端设备接收器灵敏度和最大输入 |
FOTP-3, Fiber Optic Terminal Equipment Receiver Sensitivity and Maximum Receiver Input |
| ANSI/EIA 527-1986 |
彩色显像管屏幕定义 |
Screen Definition for Color Picture Tubes |
| ANSI/EIA 535BAAC-A-1998 |
1型防护的固定钽片状电容器.标准电容量范围 |
Fixed Tantalum Chip Capacitor Style 1 Protected - Standard Capacitance Range |
| ANSI/EIA 535BAAD-1990 |
1型固定钽薄片电容器防护.扩展电容范围 |
Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range |
| ANSI/EIA 5400000-A-1996 |
用于电子设备的集成线路包装插座的一般规范 |
Generic Specification for Sockets for Integrated Circuit (IC) Packages for Use in Electronic Equipment |
| ANSI/EIA 540A000-A-1990 |
用于电子设备的载芯片插座的分规范 |
Sectional Specification for Sockets for Chip Carriers for Use in Electronic Equipment |
| ANSI/EIA 540AA00-1991 |
电子设备用无引线A、B或D型片载插孔的空白详细规范 |
Chip Carrier Sockets for Leadless type A,B,D Chip Carriers for use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540AAAA-1990 |
电子设备用无引线A型1.27mm(0.50英寸)间隙片载插孔的详细规范 |
Chip Carrier Sockets for Leadless Type A 1.27 mm (.050) Spacing Chip Carriers for Use in Electronic Equipment |
| ANSI/EIA 540AB00-1991 |
电子设备用塑料方形扁平组件片载插孔的空白详细规范 |
Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540ABAA-1991 |
引线间隙为0.635mm(0.25英寸)的塑料方形扁平组件片载插孔的详细规范 |
Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing) |
| ANSI/EIA 540AC00-1991 |
电子设备用J型引线塑料芯片载体(PCC)组件的片载插孔的空白详细规范 |
Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with J Type Leads for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540ACAA-1991 |
引线间隙为1.27mm(0.50英寸)的塑料片载(PCC)系列的片载插孔详细规范 |
Chip Carrier Sockets for Plastic Chip Carrier Family 1.27 mm (0.50 inch) Lead Spacing, Detail Specification for |
| ANSI/EIA 540AD00-1991 |
电子设备用针状栅极阵列插孔的适配器载体方形平板组件的详细规范 |
Adapter-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540ADAA-1992 |
电子设备用针状栅极阵列插孔的适配器载体方形平板组件的详细规范 |
Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for |
| ANSI/EIA 540B000-1989 |
电子设备用带2.54mm X 2.54mm (0.1英寸 X 0.1英寸)间隙的针状栅极阵列器件插孔的分规范 |
Sectional Specification for Sockets for Pin-Grid Array Devices with 2.54 mm ?2.54 mm (0.1 ?0.1) Spacing for Use in Electronic Equipment |
| ANSI/EIA 540B0AA-2001 |
用于电子设备的1.27mm空间的BGA插座的详细规范 |
Detail Specification for Production Ball Grid Array (BGA) Sockets with 1.27 mm (0.050 in) Spacing for Use in Electronic Equipment |
| ANSI/EIA 540B0AE-2000 |
有1.27mm空间插座的用于电气设备的生产陆地栅极排列的详细规范 |
Detail Specification for Production Land Grid Array (LGA) Socket with 1.27 mm (0.050 in) Spacing for Use in Electronic Equipment |
| ANSI/EIA 540BA00-1990 |
电子设备用带2.54mm X 2.54mm (0.1英寸 X 0.1英寸)间隙的针状栅极阵列器件插孔的空白详细规范 |
Blank Detail Specification: Sockets for Pin Grid Array Devices with 2.54 mm ?2.54 mm (0.1 ?0.1) Spacing for Use in Electronic Equipment |
| ANSI/EIA 540BAAA-A-1996 |
详细规范:用于电子设备的格网排列装置的2.54mm和2.55mm空间的低插入机械启动插座 |
Detail Specification: Mechanically Actuated (Zero and Low Insertion Force) Sockets for Pin Grid Array Devices with 2.54 mm ?2.54 mm (0.1 ?0.1) Spacing for Use in Electronic Equipment |
| ANSI/EIA 540BAAB-1990 |
电子设备用带2.54mm X 2.54mm (0.1英寸 X 0.1英寸)间隙的针状栅极阵列器件的非机械推动插孔 |
Non-Mechanically Activated Sockets for Pin Grid Array Devices with 2.54 mm ?2.54 mm (0.1 ?0.1) Spacing for Use in Electronic Equipment |
| ANSI/EIA 540BAAC-1990 |
电子设备用针状栅极阵列非机械推动挠性载体插孔的详细规范 |
Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment, Detail Specification for |
| ANSI/EIA 540C000-1988 |
电子设备用继电器插孔的分规范 |
Sectional Specification for Sockets for Relays for Use in Electronic Equipment |
| ANSI/EIA 540CA00-1989 |
继电器插孔的空白详细规范 |
Blank Detail Specification on Relay Sockets |
| ANSI/EIA 540CAAA-1989 |
平衡衔铁继电器用10A插孔的详细规范 |
Detail Specification on Relay Sockets - 10A for Balanced Armature Relay |
| ANSI/EIA 540CAAB-1989 |
平衡衔铁继电器用5A插孔的详细规范 |
Detail Specification for Relay Sockets - 5A for Balanced Armature Relay |
| ANSI/EIA 540CAAC-1990 |
双极10安继电器插孔的详细规范 |
Detail Specification for 2-Pole 10A Relay Sockets |
| ANSI/EIA 540CAAD-A-1999 |
双极 5A 继电器插孔的详细规范 |
Detail Specification for 2-Pole, 5A Relay Sockets |
| ANSI/EIA 540CAAE-A-1999 |
3极 10A 继电器插孔的详细规范 |
Detail Specification for 3-Pole 10A Relay Sockets |
| ANSI/EIA 540D000A-1991 |
电子设备用直插式组件插孔的分规范 |
In-Line Package Sockets for Use in Electronic Equipment, Sectional Specification for |
| ANSI/EIA 540D0AA-A-1991 |
双列直插式组件插孔规范 |
Dual-In-Line Package Sockets, Specification for |
| ANSI/EIA 540DA00-1991 |
电子设备用双列直插式组件插孔的空白详细规范 |
Dual-In-Line Package Sockets for Use in Electronic Equipment, Blank Detail Specification for |
| ANSI/EIA 540DAAA-A-1993 |
电子设备用双列直插式2件接触式插孔的详细规范 |
Detail Specification for Dual-in-Line 2-Piece Contact Socket for Use in Electronic Equpiment |
| ANSI/EIA 540DAAB-1991 |
用于电子设备的柔性双线插座的详细规范 |
Detail Specification for Flexible Carrier 2-Piece Dual-In-Line Socket for Use in Electronic Equipment |
| ANSI/EIA 540DB00-1993 |
退耦合电容器双列直插式组件插孔的空白详细规范 |
Blank Detail Specification for Decoupling Capacitor Dual-in-Line Package Sockets |
| ANSI/EIA 540DBAA-1994 |
电子设备用退耦合电容器双列直插式组件插孔的详细规范 |
Detail Specification for Decoupling Capacitor Dual-In-Line Package Sockets for Use in Electronic Equipment |
| ANSI/EIA 540E000-1992 |
圆形插孔的分规范 |
Sectional Specification for Round Style Sockets |
| ANSI/EIA 540EA00-1997 |
园形插座的空白详细规范 |
Blank Detail Specification for Round Style Sockets |
| ANSI/EIA 540EAAA-1997 |
园形插座的详细规范 |
Detail Specification for Round Style Sockets |
| ANSI/EIA 540F000-1991 |
电子设备用多组件插孔的分规范 |
Multi-Package Module Sockets for Use in Electronic Equipment, Sectional Specification for |
| ANSI/EIA 540FAAA-1992 |
电子设备用间距100密耳多插件垂直安装组件插孔的详细规范 |
Detail Specification for Multi-Package 100 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA 540FAAB-1992 |
电子设备用间距100密耳的多插件成角度安装组件插孔的详细规范 |
Detail Specification for Multi-Package 100 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA 540FAAC-1992 |
电子设备用间距50密耳的多插件竖直安装组件插孔的详细规范 |
Detail Specification for Multi-Package 50 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA 540FAAD-1992 |
电子设备用间距50密耳的多插件成角度安装组件插孔的详细规范 |
Detail Specification for Multi-Package 50 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
| ANSI/EIA 540G000-1993 |
电子设备用烧进插孔分规范 |
Sectional Specification for Burn-In Sockets for Use in Electronic Equipment |
| ANSI/EIA 540GA00-1993 |
电子设备用带模制垫圈的片载组件烧进插孔空白详细规范 |
Blank Detail Specification for Burn-In Socket for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment |
| ANSI/EIA 540GAAA-1993 |
电子设备用带模制垫圈的片载组件烧进插孔分规范 |
Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use with Electronic Equipment |
| ANSI/EIA 540H000-1997 |
电子设备用圆栅极阵列器件烧进插孔的分规范 |
Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
| ANSI/EIA 540HA00-2000 |
用于电子设备的使用球形栅极排列装置的预烧插座的空白详细规范 |
Blank Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
| ANSI/EIA 540HAAA-2000 |
在电子设备中用的带球形网格排列组件烙上插座的详细规范 |
Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
| ANSI/EIA 540J000-2000 |
用于电子设备的电池座的分规范 |
Sectional Specification for Battery Holders for Use in Electronic Equipment |
| ANSI/EIA 540J0AA-2000 |
用于电子设备的圆柱形电池座标准文件的详细规范 |
Detail Specification for Cylindrical Battery Holders, Standard Profile, for use in Electronic Equipment |
| ANSI/EIA 540J0AB-2001 |
用于电子设备的触点式空间电池座的详细规范 |
Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment |
| ANSI/EIA 542-1997 |
电缆电势频道识别方案 |
Cable Television Channel Identification Plan |
| ANSI/EIA 554-1-1996 |
百万分之几平均输出质量水平的评估 |
Assessment of Average Outgoing Quality Levels in Parts Per Million (PPM) |
| ANSI/EIA 554-2-1996 |
百万分之几不合格水平的估价 |
Assessment of Nonconforming Levels in Parts Per Million (PPM) |
| ANSI/EIA 554-A-1996 |
百万分之几输出不合格水平的估价 |
Assessment of Outgoing Nonconforming Levels in Parts Per Million (PPM) |
| ANSI/EIA 555-1988 |
验证符合规定质量水平PPM量级符合程度的批量验收程序 |
Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Level (SQL) in PPM |
| ANSI/EIA 556-B-1999 |
电子设备.运输集装箱外部条码标签标准 |
Electronics - Outer Shipping Container Bar Code Label Standard |
| ANSI/EIA 557-1989 |
统计过程控制系统 |
Statistical Process Control Systems |
| ANSI/EIA 557A-1995 |
统计过程控制系统 |
Statistical Process Control Systems |
| ANSI/EIA 564-1992 |
用应力裂纹法鉴定聚碳酸酯化学混合性的试验方法 |
Test Method for Chemical Compatibility of Polycarbonate by Stress Crazing Evaluation |
| ANSI/EIA 5670000-1991 |
EIA商业件模式规范 |
EIA Commercial Component Model Specification |
| ANSI/EIA 575-1990 |
通用表面安装矩形电阻器 |
Resistors, Rectangular, Surface Mount, General Purpose |
| ANSI/EIA 576-1990 |
精密表面安装矩形电阻器 |
Resistors, Rectangular, Surface Mount, Precision |
| ANSI/EIA 580A000-1991 |
金属化电极和聚对苯二甲酸乙酯介质固定片状电容器的分规范 |
Fixed Chip Capacitors with Metallized Electrodes and Polyethylene-Terephthalate Dielectric, Sectional Specification for |
| ANSI/EIA 580A0AC-1998 |
固定金属对苯二甲酸酯聚乙烯薄膜介质轴加铅直流电容器详细规范 |
Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Axial Leaded |
| ANSI/EIA 580AA00-1991 |
直流电用封装的固定金属聚对苯二甲酸乙酯薄膜介质片状电容器的空白详细规范 |
Fixed Metalized Polyethylene-Terephthalate Film Dielectric Chip Capacitors for Direct Current - Encapsulated, Blank Detail Specification for |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com