标准号 |
中文名称 |
英文名称 |
ANSI/SAE J 1344-1993 |
塑料部件的标志 |
Marking of Plastic Parts |
ANSI/SAE J 1351-1993 |
绝缘材料加热气味的测试 |
Insulation Materials, Hot Odor Test for |
ANSI/SAE J 1355-1993 |
测量弹性绝缘填料厚度的试验方法 |
Test Method for Measuring Thickness of Resilient Insulating Paddings |
ANSI/SAE J 1362-1991 |
越野自行式工作机械驾驶员操作和显示用图形符号 |
Graphical Symbols for Operator Controls and Displays on Off-Road Self-Propelled Work Machines |
ANSI/SAE J 1368-1997 |
儿童乘车安全带的固定和连接金属件 |
Child Restraint Anchorages and Attachment Hardware |
ANSI/SAE J 1369-1997 |
在后座位中设置儿童减震系绳搭板的锚固规定 |
Anchorage Provisions for Installation of Child Restraint Tether Straps in Rear Seating Positions |
ANSI/SAE J 1371-1993 |
液压挖掘机摆动的最低性能和评定程序 |
Hydraulic Excavator Swing Minimum Performance and Rating Procedure |
ANSI/SAE J 1375-1993 |
起动马达的应用考虑 |
Cranking Motor Application Considerations |
ANSI/SAE J 1384-1993 |
驾驶员座位振动性能的评价 |
Vibration Performance Evaluation of Operator Seats |
ANSI/SAE J 1389-1993 |
绝缘材料的腐蚀试验 |
Corrosion Test for Insulation Materials |
ANSI/SAE J 1394-1991 |
米制非金属空气制动系统管件 |
Metric Nonmetallic Air Brake System Tubing |
ANSI/SAE J 1401-1993 |
使用非石油基液压流体的道路车辆的液压制动软管组件 |
Road Vehicle - Hydraulic Brake Hose Assemblies for Use with Non-Petroleum Base Hydraulic Fluids |
ANSI/SAE J 1404-1993 |
脚刹车结构完整性要求.10000Ib(4500kg)以上车辆 |
Service Brake Structural Integrity Requirements - Vehicles Over 10 000 lb (4500 kg) GVWR |
ANSI/SAE J 1406-1993 |
机动车辆液压制动软管的应用 |
Application of Hydraulic Brake Hose to Motor Vehicles |
ANSI/SAE J 1409-1988 |
空气制动阀测试程序 |
Air Brake Valves Test Procedure |
ANSI/SAE J 141-1995 |
安全带金属附件性能要求 |
Seat Belt Hardware Performance Requirements |
ANSI/SAE J 1424-1993 |
12000 Ib GVWR下车辆使用的货物装卸照明灯 |
Cargo Lamps for Use on Vehicles Under 12 000 lb GVWR |
ANSI/SAE J 1441-1998 |
机动车搬运用主观额定标度 |
Subjective Rating Scale for Vehicle Handling |
ANSI/SAE J 1453-1993 |
O型环表面密封附件 |
Fitting - O-Ring Face Seal |
ANSI/SAE J 1459-1988 |
多楔带和皮带轮 |
V-Ribbed Belts and Pulleys |
ANSI/SAE J 1461-1991 |
手动减速调整器的试验程序 |
Manual Slack Adjuster Test Procedure |
ANSI/SAE J 1463-1984 |
拉型离合器传动装置安装尺寸 |
Pull-Type Clutch - Transmission Installation Dimensions |
ANSI/SAE J 1467-1993 |
封管机的固定件 |
Clip Fastener Fitting |
ANSI/SAE J 1468-1993 |
气冷式润滑油冷却气的冷却性能应用试验 |
Application Testing of Oil-to-Air Oil Coolers for Cooling Performance |
ANSI/SAE J 1470-1987 |
加速的公路车辆发出噪声的测量 |
Measurement of Noise Emitted by Accelerating Highway Vehicles |
ANSI/SAE J 1472-1987 |
碾压机的制动性能 |
Braking Performance - Roller Compactors |
ANSI/SAE J 1488-1989 |
乳化水/燃料分离测试程序 |
Emulsified Water/Fuel Separation Test Procedure |
ANSI/SAE J 1493-1986 |
启动系统供能的屏蔽 |
Shielding of Starter Systems Energization |
ANSI/SAE J 1494-1989 |
蓄电池放大器电缆 |
Battery Booster Cables |
ANSI/SAE J 1503-1986 |
空气调节的、加热的和通风的越野自行式工作机械的性能测试 |
Performance Test for Air-Conditioned, Heated, and Ventilated Off-Road Self-Propelled Work Machines |
ANSI/SAE J 1508-1993 |
软管夹具规格 |
Hose Clamp Specifications |
ANSI/SAE J 1527-1993 |
船用燃料软管 |
Marine Fuel Hoses |
ANSI/SAE J 1548-1993 |
农用轮式拖拉机牵引杆 |
Drawbars - Agricultural Wheel Tractors |
ANSI/SAE J 1674-1998 |
机动车事故信息保存和早期获得 |
Early Acquisition and Preservation of Information in a Motor Vehicle Accident |
ANSI/SAE J 1699/2-1998 |
OBD-II相关SAE规范验证.试验过程 |
OBD-II Related SAE Specification Verification - Test Procedures |
ANSI/SAE J 1737-1997 |
通过回收由燃料管,软管,配件,和燃料组件烃损失测定的试验过程 |
Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation |
ANSI/SAE J 1742-1998 |
道路电气车辆线路使用高压连接.试验方法和一般性能要求 |
Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements |
ANSI/SAE J 1748-1998 |
聚合材料暴露于汽油/氧化燃料混合物的物理特性测定的方法 |
Methods for Determining Physical Properties of Polymeric Materials Exposed to Gasoline/Oxygenate Fuel Mixtures |
ANSI/SAE J 1790-1998 |
自推动式清扫器和擦洗器控制方向要求.单电路液压辅助服务系统 |
Self-Propelled Sweepers and Scrubbers Steering Requirements - Single-Circuit Hydraulic Servo-Assisted Systems |
ANSI/SAE J 1802-1993 |
制动块有效性额定值RP |
Brake Block Effectiveness Rating RP |
ANSI/SAE J 1850-1998 |
B级数据通信网络接口 |
Class B Data Communication Network Interface |
ANSI/SAE J 19-1997 |
机动车用的浸胶乳商品和覆层 |
Latex-Dipped Goods and Coatings for Automotive Applications |
ANSI/SAE J 1939/31-1997 |
网络层 |
Network Layer |
ANSI/SAE J 198-1993 |
卡车、公共汽车和多用途车辆的风挡刮水器系统 |
Windshield Wiper Systems - Trucks, Buses, and Multipurpose Vehicles |
ANSI/SAE J 2038-APR-1990 |
发动机重量和尺寸 |
Engine Weight and Dimensions |
ANSI/SAE J 2056/1-1993 |
C类应用要求条件 |
Class C Application Requirement Considerations |
ANSI/SAE J 2069-1993 |
乘用车、有篷货车和轻型卡车的恢复连接点 |
Recovery Attachment Points for Passenger Cars, Vans, and Light Trucks |
ANSI/SAE J 2081-1997 |
一面为塑料的安全抛光材料耐模拟老化测定的试验程序 |
Resistance of Safety Glazing Materials, of which One Surface Is Plastic, to Simulated Weathering, Test Procedure for Determining |
ANSI/SAE J 2130-1997 |
自推进扫路机 |
Self-Propelled Sweepers |
ANSI/SAE J 2178-2-1997 |
B级数据通信网络接口.第2部分:数据参数定义 |
Class B Data Communication Network Messages - Part 2: Data Parameter Definitions |
ANSI/SAE J 2178/3-1998 |
B级数据通信网络接口.第3部分:单字节形式标题的帧标识符 |
Class B Data Communication Network Messages - Part 3: Frame IDs for Single-Byte Forms of Headers |
ANSI/SAE J 2180-1993 |
重型卡车静态翻转限度测量的斜置台方法 |
A Tilt Table Procedure for Measuring the Static Rollover Threshold for Heavy Trucks |
ANSI/SAE J 2214-1997 |
机动车电子编程站(VEPS).在 OEM 组装设备上的编程件系统规范 |
Vehicle Electronic Programming Stations (VEPS) System Specification for Programming Components at OEM Assembly Plants |
ANSI/SAE J 2286-2000 |
初始设备制造厂家(OEM)组装操作用售主件程序数据文档接口 |
Vendor Component Program Data File Interface for OEM Assembly Operations |
ANSI/SAE J 229-1993 |
制动结构性一体化试验程序.小轿车 |
Service Brake Structural Integrity Test Procedure - Passenger Car |
ANSI/SAE J 2293/2-1997 |
电气车辆的能量传输系统.第2部分:网络结构的通信要求 |
Energy Transfer System for Electric Vehicles - Part 2: Communication Requirements and Network Architecture |
ANSI/SAE J 2315-1998 |
轮螺母座强度 |
Wheel Nut Seat Strength |
ANSI/SAE J 2316-1998 |
乘坐车和轻型卡车轮螺母座系统试验过程和性能要求 |
Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks |
ANSI/SAE J 2333-1998 |
轮船系统和设备液压系统.过滤器选择参数 |
Ship Systems and Equipment Hydraulic Systems - Filter Selection Parameters |
ANSI/SAE J 2376-1998 |
新车辆碰撞修理信息 |
New-Vehicle Collision Repair Information |
ANSI/SAE J 2383-1998 |
空气干燥器安装程序 |
Air Dryer Installation Procedure |
ANSI/SAE J 2387-1997 |
制冷系统软管尺寸和公差 |
Dimensions and Tolerances for Coolant System Hoses |
ANSI/SAE J 2394-1998 |
ABS动力用7导体电缆 |
Seven-Conductor Cable for ABS Power |
ANSI/SAE J 240-1993 |
汽车蓄电池的寿命测试 |
Automotive Storage Batteries, Life Test for |
ANSI/SAE J 2403-1998 |
中/重型负载E/E系统诊断术语 |
Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature |
ANSI/SAE J 2405-1997 |
低渗燃料过滤和通风管 |
Low-Permeation Fuel Fill and Vent Tube |
ANSI/SAE J 2417-1998 |
林业设备Knuckle-Boom圆木装载车提升容积的计算方法 |
Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment |
ANSI/SAE J 2418-1998 |
正面碰撞减震系统件水平评价.重型卡车 |
Occupant Restraint System Evaluation Frontal Impact Component Level - Heavy Trucks |
ANSI/SAE J 2419-1998 |
正面碰撞减震系统水平评价.重型卡车 |
Occupant Restraint System Evaluation Frontal Impact System Level - Heavy Trucks |
ANSI/SAE J 2420-1998 |
COE正面强度评价动态负载重型卡车 |
COE Frontal Strength Evaluation Dynamic Loading Heavy Trucks |
ANSI/SAE J 2421-1998 |
COE正面强度评价Quasi-动态 |
COE Frontal Strength Evaluation Quasi-Static |
ANSI/SAE J 2422-1998 |
Quzsi-静态负载重型卡车箱顶强度评价 |
Cab Roof Strength Evaluation Quasi-Static Loading Heavy Trucks |
ANSI/SAE J 2423-1998 |
箱顶强度评价动态负载.重型卡车 |
Cab Roof Strength Evaluation Dynamic Loading - Heavy Trucks |
ANSI/SAE J 2424-1998 |
重型卡车箱内自由移动头形物体冲击试验 |
Free Motion Headform Impact Tests of Heavy Truck Cab Interiors |
ANSI/SAE J 2426-1998 |
重型卡车边缘翻转系统减震系统评价 |
Occupant Restraint System Evaluation Lateral Rollover System-Level Heavy Trucks |
ANSI/SAE J 2455-1998 |
驱动火车振动分析.数据要求 |
Drivetrain Systems Vibration Analysis - Data Requirements |
ANSI/SAE J 2456-1998 |
汞开关移动过程 |
Mercury Switch Removal Process |
ANSI/SAE J 2458-1998 |
耗尽电动机发电机组断路器试验和额定能力计算过程 |
Exhaust Brake Dynamometer Test and Capability Rating Procedure |
ANSI/SAE J 294-1993 |
制动结构性一体化试验程序.4500kg(10 000 1b)GVWR以上的车辆 |
Service Brake Structural Integrity Test Procedure-Vehicles Over 4500 kg (10 000 lb) GVWR |
ANSI/SAE J 328-1994 |
轮子.乘用车.性能要求和测试程序 |
Wheels - Passenger Cars - Performance Requirements and Test Procedures |
ANSI/SAE J 339-1994 |
座位安全带组件的带子磨损测试程序 |
Seat Belt Assembly Webbing Abrasion Test Procedure |
ANSI/SAE J 382-1994 |
卡车、公共汽车和多用途车辆挡风除霜系统的性能导则 |
Windshield Defrosting Systems Performance Guidelines - Trucks, Buses, and Multipurpose Vehicles |
ANSI/SAE J 384-1994 |
机动车辆座位安全带固定的测试程序 |
Motor Vehicle Seat Belt Anchorages - Test Procedure |
ANSI/SAE J 444-1993 |
喷丸硬化和清理用铸造铁丸和磨料粒度规范 |
Cast Shot and Grit Size Specifications for Peening and Cleaning |
ANSI/SAE J 537-1994 |
蓄电池 |
Storage Batteries |
ANSI/SAE J 551/11-1996 |
车辆电磁干扰.越野车辆源 |
Vehicle Electromagnetic Immunity - Off-Vehicle Source |
ANSI/SAE J 551/12-1996 |
车辆电磁干扰.机载发射机模拟 |
Vehicle Electromagnetic Immunity - On-Board Transmitter Simulation |
ANSI/SAE J 551/13-1996 |
车辆电磁干扰.体电流输入 |
Vehicle Electromagnetic Immunity - Bulk Current Injection |
ANSI/SAE J 551/2-1996 |
车辆、电动船和火花点燃式发动机驱动的无线电干扰特性的测量方法和试验限值 |
Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles, Motorboats, and Spark-Ignited Engine-Driven Devices |
ANSI/SAE J 551/4-1996 |
150kHz-1000MHz宽谱带和窄谱带,车辆和装置无线电干扰特性的测量方法和试验限值 |
Test Limits and Methods of Measurement of Radio Disturbance Characteristics of Vehicles and Devices, Broadband and Narrowband, 150 kHz to 1000 MHz |
ANSI/SAE J 583-1993 |
前雾灯 |
Front Fog Lamps |
ANSI/SAE J 663-1994 |
制动块的制动衬片和螺栓用铆钉 |
Rivets for Brake Linings and Bolts for Brake Blocks |
ANSI/SAE J 673-1993 |
汽车的安全玻璃 |
Automotive Safety Glazing |
ANSI/SAE J 694-1998 |
盘状车轮/毂或鼓轮界面尺寸.商用机动车 |
Disc Wheel/Hub or Drum Interface Dimensions - Commercial Vehicles |
ANSI/SAE J 712-1993 |
工业和农业用盘轮 |
Industrial and Agricultural Disc Wheels |
ANSI/SAE J 714-1993 |
工业和农业用盘轮的轮安装件 |
Wheel Mounting Elements for Industrial and Agricultural Disc Wheels |
ANSI/SAE J 902-1993 |
乘用车挡风除霜系统 |
Passenger Car Windshield Defrosting Systems |
ANSI/SAE J 964-1998 |
测定后视镜反射率的试验方法 |
Test Procedure for Determining Reflectivity of Rear-View Mirrors |
ANSI/SAE J2004-1992 |
内燃机活塞环.膨胀/多段合成控油环 |
|
ANSI/SAE TSB 001-1993 |
SAE 技术标准局的标准和规则 |
SAE Technical Standards Board Rules and Regulations |
ANSI/SAE Z 26.1-1996 |
地面道路上运行的装配有玻璃的汽车及汽车设备用安全玻璃材料.安全标准 |
Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard |
ANSI/SBS 1-2004 |
小型板.脚印图尺寸 |
|
ANSI/SBS 1-2004 |
小型板.“脚印图“尺寸 |
(Microplates - Footprint Dimensions ) |
ANSI/SBS 2-2004 |
小型板.高度尺寸 |
|
ANSI/SBS 2-2004 |
小型板.高度尺寸 |
(Microplates - Height Dimensions ) |
ANSI/SBS 3-2004 |
小型板.底部外缘尺寸 |
|
ANSI/SBS 3-2004 |
小型板.底部外缘尺寸 |
(Microplates - Bottom Outside Flange Dimensions ) |
ANSI/SBS 4-2004 |
小型板.井位置 |
|
ANSI/SBS 4-2004 |
小型板.井位置 |
(Microplates - Well Positions ) |
ANSI/SCTE 01-1996 |
F端口(阴性室外)物理尺寸 |
F Port (Female Outdoor) Physical Dimensions |
ANSI/SCTE 03-1997 |
同轴电缆结构回波损耗试验方法 |
Test Method for Coaxial Cable Structural Return Loss |
ANSI/SCTE 04-1997 |
F 连接器回波损耗试验方法 |
Test Method for F Connector Return Loss |
ANSI/SCTE 05-1999 |
F 连接器回波损耗线对试验方法 |
Test Method for F Connector Return Loss In-Line Pair |
ANSI/SCTE 06-1999 |
复合畸变测量 |
Composite Distortion Measurement (Composite Triple Beat & Composite Second Order) |
ANSI/SCTE 07-2000 |
电缆电视的数字视频传输 |
Digital Video Transmission for Cable Television |
ANSI/SCTE 10-2001 |
柔性同轴电缆冲击试验方法 |
Test Method for Flexible Coaxial Cable Impact Test |
ANSI/SCTE 100-2004 |
75 Ohm平滑铝制用户接入电缆规范 |
|
ANSI/SCTE 102-2005 |
中继和配电连接器的电缆保持力测试 |
|
ANSI/SCTE 103-2004 |
F连接器和F81筒的分接电缆的直流接触电阻的试验方法 |
|
ANSI/SCTE 104-2005 |
压缩系统通信应用程序接口(API)的自动系统 |
|