标准号 |
中文名称 |
英文名称 |
ANSI/ASTM E 1740-2001 |
用锥形量热计测定墙面覆层材料的热释放率及其它着火试验响应特性的试验方法 |
Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter |
ANSI/ASTM E 1742-1996 |
放射照相检验实用规程 |
Practice for Radiographic Examination |
ANSI/ASTM E 1753-2002 |
干漆膜中铅含量检测用现场定性化学试验整套工具的操作规程 |
Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films (04.11) |
ANSI/ASTM E 1762-1997 |
医疗保健信息的电子鉴定用规范 |
Specification for Electronic Authentication of Health Care Information |
ANSI/ASTM E 1769-1996 |
电子医疗记录和记录系统特性的指南 |
Guide for Properties of Electronic Health Records and Record Systems |
ANSI/ASTM E 1774-1996 |
电磁声学传感器指南 |
Guide to Electromagnetic Acoustic Transducers (Emats) |
ANSI/ASTM E 1775-2001 |
对铅的现场提取和用现场便携式电子化学或光度分光仪分析的工作的评价指南 |
Guide for Evaluating the Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ANSI/ASTM E 1776-2001 |
对铅的现场提取和用现场便携式电子化学或光度分光仪分析的工作的评价指南(04.07) |
Guide for Evaluating the Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead (04.07) |
ANSI/ASTM E 1779-1997 |
进行室外燥声测量用测量方案的拟定指南 |
Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements |
ANSI/ASTM E 1780-1997 |
户外附近固定声源的声音接收性测量指南 |
Guide for Measuring Outdoor Sound Received From a Nearby Fixed Source |
ANSI/ASTM E 1792-2002 |
表层灰土中擦取铅取样材料的规范 |
Specification for Wipe Sampling Materials for Lead In Surface Dust (04.11) |
ANSI/ASTM E 1795-1996 |
建筑物含铅漆用液体涂层封装产品规范 |
Specification for Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ANSI/ASTM E 1796-1996 |
建筑物含铅漆用液体涂层封装产品的选择和使用指南 |
Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ANSI/ASTM E 1797-1996 |
建筑物含铅漆用增强的液体涂层封装产品规范 |
Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ANSI/ASTM E 18-2002 |
金属材料的洛氏硬度和表面洛氏硬度的测试方法 |
Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials |
ANSI/ASTM E 1802-2002 |
光伏模块潮湿绝缘综合试验的试验方法 |
Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules |
ANSI/ASTM E 1807-2001 |
金属连接板及其相关的术语定义(04.11) |
Definitions of Terms Relating or Pertaining to Metal Connector Plates (04.11) |
ANSI/ASTM E 1814-1996 |
铸件的计算机断层摄影(CT)检查的实施规程范 |
Practice for Computed Tomographic (CT) Examination of Castings |
ANSI/ASTM E 1815-1996 |
工业放射摄影胶片系统分类用试验方法 |
Test Method for Classification of Film Systems for Industrial Radiography |
ANSI/ASTM E 1816-1996 |
用电磁声传导(EMAT)技术的超声波检验的实施规程 |
Practice for Ultrasonic Examinations Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
ANSI/ASTM E 1817-1996 |
使用质量表示指示仪(RQI)的放射检验的质量控制实用规程 |
Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators(Rqi-s) |
ANSI/ASTM E 1818-1997 |
能量在80至300Kev的放射处理用电子束设施中的剂量测定实用规程 |
Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies between 80 and 300 Kev |
ANSI/ASTM E 1822-2002 |
叠板椅实物的着火试验方法 |
Test Method for Fire Testing of Real Scale Stacked Chairs |
ANSI/ASTM E 1828-2002 |
涂料中铅含量检测用现场定性化学试验整套工具工作特性评价指南(04.11) |
Guide for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (04.11) |
ANSI/ASTM E 1830M-2002 |
测定光伏模块的机械集成性的试验方法(米制) |
Test Methods for Determining the Mechanical Integrity of Photovoltaic Modules (Metric) |
ANSI/ASTM E 1836-2002 |
设备管理用建筑物地板面积测量的标准分类 |
Standard Classification for Building Floor Area Measurements for Facility Management |
ANSI/ASTM E 1851-1997 |
耐久硬质墙壁浮动结构电磁屏蔽效果的试验方法 |
Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
ANSI/ASTM E 1856-1997 |
用于由普通试验机上获得数据的计算机化数据获得系统评估的指南 |
Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines |
ANSI/ASTM E 186-1996 |
重壁(2-4 1/2-in./51-114 mm)钢铸件用参考射线照片 |
Reference Radiographs for Heavy-Walled (2 to 4 1/2-In./51 to 114-Mm) Steel Castings |
ANSI/ASTM E 1862-1997 |
用红外成像辐射仪测量和均衡反射温度的试验方法 |
Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers |
ANSI/ASTM E 1902-1997 |
口授、翻译和录制健康记录的安全机密性管理指南 |
Guide for Mangement of the Confidentiality and Security of Dictation, Transcription, and Transcribed Health Record |
ANSI/ASTM E 1907-1997 |
面层对吸收潮气敏感的混凝土楼板有关潮气吸收性测定的实施规程 |
Practices for Determining Moisture-Related Acceptability of Concrete Floors to Receive Moisture-Sensitive Finishes |
ANSI/ASTM E 1908-1997 |
毒性溶浸过程试验用的来自于建筑改建或除铅工程中的碎料废物样品的选择指南 |
Guide for Sample Selection of Debris Waste from a Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) |
ANSI/ASTM E 1918-1997 |
现场测量水平和低斜表面太阳反射性的试验方法 |
Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
ANSI/ASTM E 1919-1997 |
有关粒子和喷雾特性的世界范围公布标准的指南 |
Guide for Worldwide Published Standards Relating to Particle and Spray Characterization |
ANSI/ASTM E 192-1996 |
航天设备的蜡模钢铸件的参考射线照相 |
Reference Radiographs for Investment Steel Castings of Aerospace Applications |
ANSI/ASTM E 1933-1999 |
使用红外成像辐射计测量和补偿发射率的试验方法 |
Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers |
ANSI/ASTM E 1936-1997 |
评价辐射摄影数字化系统性能的参考辐射摄影 |
Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems |
ANSI/ASTM E 1939-1998 |
血液辐照剂量测定的实施规程 |
Practice for Blood Irradiation Dosimetry |
ANSI/ASTM E 1940-2001 |
无菌释放计划用昆虫辐照剂量测定的指南 |
Guide for Dosimetry for Irradiation of Insects for Sterile Release Programs |
ANSI/ASTM E 1956-2001 |
辐射处理用热致发光剂量测定(TLD)系统使用的操作规程 |
Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing |
ANSI/ASTM E 196-1995 |
地板和平屋顶承重测试的实施规程 |
Practice for Gravity Load Testing of Floors and Flat Roofs (04.11) |
ANSI/ASTM E 1966-1998 |
耐火连接系统的试验方法 |
Test Method for Fire Resistive Joint Systems |
ANSI/ASTM E 1985-1998 |
用户鉴定和授权指南 |
Guide for User Authentication and Authorization |
ANSI/ASTM E 1994-1998 |
使用过程导向的平均质量检查最低限和批量允许不良率的抽样方案的操作规程 |
Practice for Use of Process Oriented AOQL and LTPD Sampling Plans |
ANSI/ASTM E 1995-1998 |
在单个闭室中利用水平试样测量烟雾昏暗度的试验方法 |
Test Method for Measurement of Smoke Obscuration Using in a Single Closed Chamber, with the Test Specimen Oriented Horizontally |
ANSI/ASTM E 1998-1998 |
评定减压诱导的通风燃气用具回流和溢出的新标准指南 |
New Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
ANSI/ASTM E 2003M-1999 |
中子射线摄影束纯度显示器制造的实施规程 |
Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators [Metric] |
ANSI/ASTM E 2010-2001 |
窗组件正压燃烧试验的试验方法 |
Test Method for Positive Pressure Fire Test of Window Assemblies |
ANSI/ASTM E 2013-1999 |
在价值分析研究中绘制功能分析系统技术图和进行功能分析的实施规程 |
Practice for Constructing Fast Diagrams and Performing Function Analysis During Value Analysis Study |
ANSI/ASTM E 2016-1999 |
工业纺织金属丝布规范 |
Specification for Industrial Woven Wire Cloth |
ANSI/ASTM E 2023-1999 |
中子射线摄影敏感度显示器制造的实施规程 |
Practice for Fabrication of Neutron Radiographic Sensitivity Indicator |
ANSI/ASTM E 2024-1999 |
用热导泄漏探测器测定大气泄漏的试验方法 |
Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
ANSI/ASTM E 2025-1999 |
门窗部件和组件耐冲击力评定的试验方法 |
Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies |
ANSI/ASTM E 2029-1999 |
用示踪气体溶液法测量管道中体积和质量流量率的试验方法 |
Test Method for Volumetric and Mass Flow, Rate Measurement in a Duct Using Tracer Gas Dilution |
ANSI/ASTM E 2030-2001 |
荧光安全标志推荐使用指南 |
Guide for Recommended Uses of Photoluminescent Safety Markings |
ANSI/ASTM E 2032-1999 |
耐火试验数据的扩展 |
Extension of Data from Fire Endurance Tests |
ANSI/ASTM E 2033-1999 |
计算机辐射(光刺激照明法)实施规程 |
Practice for Computed Radiology (Photostimulable Luminescence Method) |
ANSI/ASTM E 2052-1999 |
设备中铅危害识别和管理指南 |
Guide for Identication and Management of Lead Hazards in Facilities |
ANSI/ASTM E 2058-2001 |
使用火焰传播仪器测量合成聚酯材料易燃性的试验方法 |
Methods of Test for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus |
ANSI/ASTM E 2061-2001 |
铁路运输车辆火灾评估指南 |
Guide for Fire Hazard Assessment of Rail Transportation Vehicles |
ANSI/ASTM E 2067-2000 |
完全氧燃烧热量测量火灾试验实施规程 |
Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
ANSI/ASTM E 2072-2001 |
荧光(磷光)安全标志规范 |
Specification for Photoluminescent (Phosphorescent) Safety Markings |
ANSI/ASTM E 2073-2001 |
荧光(磷光)安全标志的可见光发光率的试验方法 |
Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings |
ANSI/ASTM E 2084-2000 |
用数字符号鉴定医疗保健信息的规范 |
Specification for Authentication of Healthcare Information using Digital Signatures |
ANSI/ASTM E 2085-2001 |
医疗保健信息安全框架指南 |
Guide on Security Framework for Healthcare Information |
ANSI/ASTM E 2086-2000 |
Internet和Intranet医疗保健安全指南 |
Guide for Internet and Intranet Healthcare Security |
ANSI/ASTM E 2097-2000 |
完全氧燃烧热量测量火灾试验实施规程 |
Practice for Full Scale Oxygen Consumption Calorimetry Fire Tests |
ANSI/ASTM E 2098-2000 |
PB级外绝缘涂层系统(EIFS)中使用的玻璃纤维增强网暴露于氢氧化钠溶液后拉伸断裂强度测定的试验方法 |
Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation Finish Systems (EIFS), After Exposure to a Sodium Hydroxide Solution |
ANSI/ASTM E 2099-2000 |
外墙系统预制造实验室模型规范和评定的实施规程 |
Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
ANSI/ASTM E 2102-2000 |
使用锥形辐射加热器测量屏蔽的质量损失和可燃性的方法 |
Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
ANSI/ASTM E 2104-2001 |
高级航空和涡轮机材料和件的射线照相检查实施规程 |
Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
ANSI/ASTM E 2110-2001 |
外部绝缘和涂层系统的术语 |
Terminology for Exterior Insulation and Finish Systems (EIFS) |
ANSI/ASTM E 2115-2000 |
对常用于儿童的住宅建筑和其它财产进行铅危害性评估的指南 |
Guide for Conducting Lead Hazard Assessments of Residential Housing and Other Properties Frequented by Children |
ANSI/ASTM E 2116-2001 |
自含干燥源辐射器的剂量测定实施规程 |
Practice for Dosimetry for a Self-Contained Dry Source Irradiator |
ANSI/ASTM E 2118-2000 |
电子医疗记录环境和网络结构内医疗实验室服务机构的合作指南 |
Guide for Coordination of Clinical Laboratory Services Within the Electronic Health Record Environment and Networked Architectures |
ANSI/ASTM E 2120-2000 |
涂料薄膜中铅含量测量用便携式X射线荧光光谱仪性能评估的实施规程 |
Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films |
ANSI/ASTM E 2121-2001 |
在已有的低层住宅建筑中安装氡减轻系统的实施规程 |
Practice for Installing Radon Mitigation Systems in Existing Low Rise Residential Buildings |
ANSI/ASTM E 2127-2001 |
建筑物构造中隔墙系统抵抗拉伸与横向荷载的组合用静荷载的试验方法 |
Test Methods for Static Load Test for Combined Tensile and Transverse Load Resistance of Panel Wall Systems in Building Construction |
ANSI/ASTM E 2128-2001 |
建筑墙体漏水性评价指南 |
Guide for Evaluating Water Leakage of Building Walls |
ANSI/ASTM E 2129-2001 |
建筑部件持续评定用数据采集的实施规程 |
Practice for Data Collection for Sustainability Assessment of Building Elements |
ANSI/ASTM E 213-1996 |
金属管道的超声检验实施规程 |
Practice for Ultrasonic Examination of Metal Pipe and Tubing |
ANSI/ASTM E 2134-2001 |
外部绝缘和涂层系统粘着抗拉强度性能评定的试验方法 |
Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System |
ANSI/ASTM E 2136-2001 |
单系列附属和独立住房建筑物的性能说明和评价指南.耐久性 |
Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings - Durability |
ANSI/ASTM E 214-1996 |
用脉冲纵向波反射法做金属浸入超声检验的实施规程 |
Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves |
ANSI/ASTM E 2140-2001 |
用静水压差测定金属屋顶板组件的渗水性的试验方法 |
Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
ANSI/ASTM E 2141-2001 |
密封绝缘玻璃组件上可吸收性电化色涂层的耐久性的评定方法 |
Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Note 1) |
ANSI/ASTM E 2145-2001 |
医疗健康信息建模实施规程 |
Practice for Modeling in Health Informatics |
ANSI/ASTM E 2150-2001 |
生物圈运行要素的分类.环境成本要素结构 |
Classification for Life-Cycle Environmental Work Elements - Environmental Cost Elements Structure |
ANSI/ASTM E 2151-2001 |
单系列附属和独立住房建筑物的性能说明和评价指南术语.耐久性 |
Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
ANSI/ASTM E 2156-2001 |
符合一户附联式住宅和独建式住宅性能标准指南的比较设计、交替系统和材料的经济实效评定指南 |
Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance With Performance Standard Guides for Single-Family Attached and Detached Dwellings |
ANSI/ASTM E 2166-2001 |
组织和管理建筑数据规程 |
Practice for Organizing and Managing Building Data |
ANSI/ASTM E 2167-2001 |
石料固结性的选择和应用指南 |
Guide for the Selection and Use of Stone Consolidants |
ANSI/ASTM E 2168-2001 |
建筑施工评估中的津贴、预算外费用和储备金的分类 |
Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating |
ANSI/ASTM E 2174-2001 |
安装的挡火物的现场检验操作规程 |
Practice for On-Site Inspection of Installed Firestops |
ANSI/ASTM E 2179-2001 |
实验室测量地板覆盖物减缓撞击声音通过混凝土地面传输的有效性的试验方法 |
Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
ANSI/ASTM E 2182-2002 |
保健中临床XML DTDs规范 |
Specification for Clinical XML DTDs in Healthcare |
ANSI/ASTM E 2183-2002 |
XML DTD设计、构造和实施规范/指南 |
Practice/guide for XML DTD Design, Architecture and Implementation |
ANSI/ASTM E 2184-2002 |
保健文件格式规范 |
Specification for Healthcare Document Formats |
ANSI/ASTM E 2185-2001 |
独立数字听写系统与工作站之间数字声音数据传送规范 |
Specification for Transferring Digital Voice Data Between Independent Digital Dictation Systems and Workstations |
ANSI/ASTM E 2187-2002 |
测量香烟引火强度的试验方法 |
Test Method for Measuring the Ignition Strength of Cigarettes |
ANSI/ASTM E 23-2002 |
金属材料切口试棒冲击试验的试验方法 |
Test Methods for Notched Bar Impact Testing of Metallic Materials |
ANSI/ASTM E 241-1990 |
建筑结构防水损坏提高耐久性的实施规程 |
Practices for Increasing Durability of Building Constructions Against Water-Induced Damage (04.11) |
ANSI/ASTM E 242-2001 |
作为一些参数的射线摄影图像而出现的参考射线摄影 |
Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed |
ANSI/ASTM E 243-1997 |
铜及铜合金管的电磁(涡流)检验实施规范 |
Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes |
ANSI/ASTM E 272-1997 |
高强度铜基和镍铜合金铸件用参考射线照片 |
Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings |
ANSI/ASTM E 273-2001 |
径向焊接管道的超声检验操作规程 |
Practice for Ultrasonic Examination of Longitudinal Welded Pipe and Tubing |
ANSI/ASTM E 280-1996 |
重壁(4 1/2-12in.)(114-305 mm)钢铸件的基准射线照相 |
Reference Radiographs for Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings |
ANSI/ASTM E 283-1991 |
通过样品的具体压差测定由外窗、窗帘墙和门泄露空气比率的试验方法 |
Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen (04.11) |
ANSI/ASTM E 292-2001 |
材料断裂缺口拉伸试验的执行时间的试验方法 |
Test Methods for Conducting Time for Rupture Notch Tension Tests of Materials |
ANSI/ASTM E 309-1995 |
用磁化饱和对钢管产品的边际电流检验的操作规程 |
Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation |
ANSI/ASTM E 310-1996 |
锡青铜铸件用参考射线照相 |
Reference Radiographs for Tin Bronze Castings |
ANSI/ASTM E 317-1996 |
不使用电子测量仪的超声波脉冲回音系统的性能特征评估的实施规程 |
Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Systems Without the Use of Electronic Measurement Instruments |
ANSI/ASTM E 329-2002 |
从事建筑材料试验和/或检验的机构的规范 |
Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction |
ANSI/ASTM E 330-1996 |
通过均一静态空气压差测定外窗、窗帘墙和门结构性能的试验方法 |
Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) |
ANSI/ASTM E 331-1996 |
通过均一静态空气压差测定门、窗帘墙、外窗水渗透的试验方法 |
Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) |
ANSI/ASTM E 336-1997 |
建筑物中隔音性能的测量试验方法 |
Test Method for Measurement of Airborne Sound Insulation In Buildings |
ANSI/ASTM E 376-1996 |
用磁场或涡流(电磁的)试验法测量覆层厚度的实施规程 |
Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods |
ANSI/ASTM E 390-2001 |
钢熔焊接的参考射线摄影 |
Reference Radiographs for Steel Fusion Welds |
ANSI/ASTM E 405-1989 |
窗磨损试验旋转操作的试验方法 |
Test Methods for Wear Testing Rotary Operations for Windows (04.11) |