标准号 |
中文名称 |
英文名称 |
| ASME B16.12-1998 |
铸铁螺纹排水管件 |
(Cast iron threaded drainage fittings) |
| ASME B16.14-1991 |
带有管螺纹的铁管塞、管套、锁紧螺母 |
(Ferrous pipe plugs, bushings, and locknuts with pipe threads) |
| ASME B16.15-1985 |
铸青铜螺纹管件 |
(Cast bronze threaded fittings) |
| ASME B16.18-2001 |
铸铜合金软钎焊连接压力管件 |
(Cast copper alloy solder joint pressure fittings) |
| ASME B16.21-1992 |
管法兰用非金属平密封垫 |
(Nonmetallic flat gaskets for pipe flanges) |
| ASME B16.21-2005 |
管法兰用非金属平垫圈 |
|
| ASME B16.22-2001 |
锻铜和铜合金钎焊压力配件 |
(Wrought copper and copper alloy solder joint pressure fittings) |
| ASME B16.23 Errata-2003 |
铸铜合金软钎焊连接排水管件.DWV.勘误 |
|
| ASME B16.23-2002 |
DWV类铸铜合金钎焊连接排水管件 |
(Cast copper alloy solder joint drainage fittings: DWV) |
| ASME B16.24-2001 |
150、300、400、600、900、1500和2500 类铸铜合金管法兰和法兰配件 |
(Cast copper alloy pipe flanges and flanged fittings: Classes 150, 300, 400, 600, 900, 1500, and 2500) |
| ASME B16.25-1997 |
对接焊端 |
(Buttwelding ends) |
| ASME B16.26-1988 |
青铜扩口管用铸铜合金配件 |
(Cast copper alloy fittings for flared copper tubes) |
| ASME B16.28-1994 |
可锻钢对接焊弧形弯头和回转管 |
(Wrought steel buttwelding short radius elbows and returns) |
| ASME B16.29-2001 |
DWV类可锻铜和可锻铜合金钎焊连接排水管接头 |
(Wrought copper and wrought copper alloy solder joint drainage fittings - DWV) |
| ASME B16.3-1998 |
可锻铁螺纹配件.等级150和300 |
(Malleable iron threaded fittings; Classes 150 and 300) |
| ASME B16.33-2002 |
125表压及以下的气体管道系统中使用的手动金属气阀 |
(Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2)) |
| ASME B16.34-1996 |
阀门.法兰、螺纹和焊接端 |
(Valves - Flanged, threaded, and welding end) |
| ASME B16.34-2004 |
带凸缘、加螺纹和焊接端阀门 |
|
| ASME B16.34a Addenda-1998 |
带螺纹的法兰式阀门和焊接端.附录 |
(Valves - Flanged, threaded, and welding end; Addenda) |
| ASME B16.36-1996 |
孔板法兰 |
(Orifice flanges) |
| ASME B16.38-1985 |
气体分配系统中用手动大型金属阀门(NPS 2 1/2到12,其最大允许表压不超过125巴) |
(Large metallic valves for gas distribution (manually operated, NPS 2 1/2 to 12, 125 psig maximum)) |
| ASME B16.39-1998 |
可锻铁螺纹管活接头:等级150、250和300 |
(Malleable iron threaded pipe unions; Classes 150, 250, and 300) |
| ASME B16.4-1998 |
灰口铁螺纹配件.等级150和300 |
(Gray iron threaded fittings; Classes 125 and 250) |
| ASME B16.40 Erratum-2003 |
气体分配系统中手工操纵的热塑性气体关闭器和阀门.勘误 |
|
| ASME B16.40-2002 |
气体分配系统中的手动热塑性气体截流阀及阀门 |
(Manually operated thermoplastic gas shutoffs and valves in gas distribution systems) |
| ASME B16.42-1998 |
球墨铸铁管法兰及法兰配件.等级150和300 |
(Ductile iron pipe flanges and flanged fittings - Classes 150 and 300) |
| ASME B16.47-1996 |
NPS 26 - NPS 60的大直径钢法兰 |
(Large diameter steel flanges - NPS 26 through NPS 60) |
| ASME B16.48-1997 |
钢丝绳用坯件 |
(Steel line blanks) |
| ASME B16.49-2000 |
传输和分配系统用工厂预制锻钢对焊感应管弯头 |
(Factory-made wrought steel buttwelding induction bends for transportation and distribution systems) |
| ASME B16.5-1996 |
管法兰和法兰管件.NPS 1/2 - NPS 24 |
(Pipe flanges and flanged fittings - NPS 1/2 through NPS 24) |
| ASME B16.5-2003 |
管法兰和法兰管件:NPS 1/2-24 |
|
| ASME B16.50-2001 |
锻造铜及铜合金硬焊结合压力配件 |
(Wrought copper and copper alloy braze-joint pressure fittings) |
| ASME B16.5a Addenda-1998 |
管法兰和法兰管件.NPS 1/2至NPS 24.附录 |
(Pipe flanges and flanged fittings - NPS 1/2 through NPS 24; Addenda) |
| ASME B16.9-2001 |
工厂制锻钢对焊配件 |
(Factory-made wrought steel buttwelding fittings) |
| ASME B16.9-2003 |
工厂制锻钢对焊配件 |
|
| ASME B17.1-1967 |
键与键槽 |
(Keys and keyseats) |
| ASME B17.2-1967 |
月牙键与键槽 |
(Woodruff keys and keyseats) |
| ASME B18.1.1-1972 |
小型实心铆钉 |
(Small solid rivets) |
| ASME B18.1.2-1972 |
大型铆钉 |
(Large rivets) |
| ASME B18.1.3M Errata-1985 |
米制小型实心铆钉正误表 |
(Metric small solid rivets; Errata) |
| ASME B18.1.3M-1983 |
米制小型实心铆钉 |
(Metric small solid rivets) |
| ASME B18.10-1982 |
道轨用螺栓和螺母 |
(Track bolts and nuts) |
| ASME B18.11-1961 |
小型螺钉 |
(Miniature screws) |
| ASME B18.12-2001 |
机械紧固件术语汇编 |
(Glossary of terms for mechanical fasteners) |
| ASME B18.13-1996 |
螺钉和洗衣机组件.臂板(英寸系列) |
(Screw and washer assemblies - Sems (Inch series)) |
| ASME B18.16.1M Errata-1979 |
有效力矩型米制钢六角螺母和六角法兰螺母机械和性能要求.勘误表 |
(Mechanical and performance requirements for prevailing-torque type steel metric hex nuts and hex flange nuts; Errata) |
| ASME B18.16.1M-1979 |
有效力矩型米制钢六角螺母和六角法兰螺母的机械和性能要求 |
(Mechanical and performance requirements for prevailing-torque type steel metric hex nuts and hex flange nuts) |
| ASME B18.16.2M-1979 |
有效力矩型米制钢六角螺母和六角法兰螺母的转矩应力试验要求 |
(Torque-tension test requirements for prevailing-torque type steel metric hex nuts and hex flange nuts) |
| ASME B18.16.3M-1998 |
有效力矩型米制钢六角螺母和六角法兰螺母的尺寸要求 |
(Dimensional requirements for prevailing-torque type steel metric hex nuts and hex flange nuts) |
| ASME B18.18.1M-1987 |
通用紧固件的检验和质量保证 |
(Inspection and quality assurance for general purpose fasteners) |
| ASME B18.18.3M-1987 |
专用紧固件的检验和质量保证 |
(Inspection and quality assurance for special purpose fasteners) |
| ASME B18.18.4M-1987 |
高度专业化设计应用中紧固件的检验和质量保证 |
(Inspection and quality assurance for fasteners for highly specialized engineered applications) |
| ASME B18.2.1 Erratum-2003 |
方头和六角头螺栓和螺钉(英制系列).ASME B18.2.1-1996的勘误 |
|
| ASME B18.2.1-1996 |
英制方头和六角头螺栓和螺钉(英制系列) |
(Square and hex bolts and screws (Inch series)) |
| ASME B18.2.1a Addenda-1999 |
方头和六角头螺栓和螺钉(英制系列).附录 |
(Square and hex bolts and screws (inch series); Addenda) |
| ASME B18.2.2-1987 |
英制四角和六角形螺母 |
(Square and hex nuts (Inch series)) |
| ASME B18.2.3.1M-1999 |
米制六角头螺钉 |
(Metric hex cap screws) |
| ASME B18.2.3.2M Errata-1980 |
米制成型六角头螺钉,正误表 |
(Metric formed hex screws; Errata) |
| ASME B18.2.3.2M-1979 |
米制成型六角头螺钉 |
(Metric formed hex screws) |
| ASME B18.2.3.2M-2005 |
米制成型六角螺钉 |
|
| ASME B18.2.3.3M Errata-1981 |
米制重型六角头螺钉,正误表 |
(Metric heavy hex screws; Errata) |
| ASME B18.2.3.3M-1979 |
米制重型六角头螺钉 |
(Metric heavy hex screws) |
| ASME B18.2.3.4M-2001 |
米制六角头法兰螺钉 |
(Metric hex flange screws) |
| ASME B18.2.3.5M Errata-1981 |
米制六角头螺栓,正误表 |
(Metric hex bolts; Errata) |
| ASME B18.2.3.5M-1979 |
米制六角头螺栓 |
(Metric hex bolts) |
| ASME B18.2.3.6M Errata-1981 |
米制重型六角头螺栓,正误表 |
(Metric heavy hex bolts; Errata) |
| ASME B18.2.3.6M-1979 |
米制重型六角头螺栓 |
(Metric heavy hex bolts) |
| ASME B18.2.3.7M Errata-1981 |
米制重型六角头结构螺栓,正误表 |
(Metric heavy hex structural bolts; Errata) |
| ASME B18.2.3.7M-1979 |
米制加重六角头结构螺栓 |
(Metric heavy hex structural bolts) |
| ASME B18.2.3.8M-1981 |
米制六角木螺钉 |
(Metric hex lag screws) |
| ASME B18.2.3.9M-2001 |
米制大型六角头法兰螺钉 |
(Metric heavy hex flange screws) |
| ASME B18.2.4.1M-2002 |
米制1型六角螺母 |
(Metric hex nuts, style 1) |
| ASME B18.2.4.2M Errata-1982 |
米制2型六角螺母,正误表 |
(Metric hex nuts, style 2; Errata) |
| ASME B18.2.4.2M-1979 |
米制2型六角螺母 |
(Metric hex nuts, style 2) |
| ASME B18.2.4.2M-2005 |
米制2型六角螺母 |
|
| ASME B18.2.4.3M Errata-1981 |
米制六角头开槽螺母,正误表 |
(Metric slotted hex nuts; Errata) |
| ASME B18.2.4.3M-1979 |
米制六角开槽螺母 |
(Metric slotted hex nuts) |
| ASME B18.2.4.4M-1982 |
米制六角法兰螺母 |
(Metric hex flange nuts) |
| ASME B18.2.4.5M Errata-1981 |
米制六角头锁紧螺母,正误表 |
(Metric hex jam nuts; Errata) |
| ASME B18.2.4.5M-1979 |
米制六角头锁紧螺母 |
(Metric hex jam nuts) |
| ASME B18.2.4.6M Errata-1981 |
米制重型六角头螺母正误表 |
(Metric heavy hex nuts; Errata) |
| ASME B18.2.4.6M-1979 |
米制重型六角螺母 |
(Metric heavy hex nuts) |
| ASME B18.2.6-1996 |
用于结构的紧固件 |
(Fasteners for use in structural applications) |
| ASME B18.2.7.1M Erratum-2002 |
米制12键槽凸缘螺钉.勘误 |
(Metric 12-spline flange screws; Erratum) |
| ASME B18.2.7.1M-2002 |
米制12键槽凸缘螺钉 |
(Metric 12-spline flange screws) |
| ASME B18.21.1-1999 |
英制锁紧垫圈 |
(Lock washers (Inch series)) |
| ASME B18.21.2M-1999 |
米制锁紧垫圈 |
(Lock washers (Metric series)) |
| ASME B18.22.1-1965 |
平垫圈 |
(Plain washers) |
| ASME B18.22M Errata-1983 |
米制平垫圈.正误表 |
(Metric plain washers; Errata) |
| ASME B18.22M-1981 |
米制平垫圈 |
(Metric plain washers) |
| ASME B18.24-2004 |
部件识别标准号(PIN) |
|
| ASME B18.24.1-1996 |
B18外螺纹产品领部件识别号(PIN)编码系统标准 |
(Part identifying number (pin) code system standard for B18 externally threaded products) |
| ASME B18.24.3-1998 |
B18无螺纹产品用配件识别号(PIN)编码系统标准 |
(Part identifying number (PIN) code system standard for B18 nonthreaded products) |
| ASME B18.25.1M-1996 |
正方形和长方形键和键槽 |
(Square and rectangular keys and keyways) |
| ASME B18.25.2M-1996 |
月牙键和键槽 |
(Woodruff keys and keyways) |
| ASME B18.27a Addenda-1999 |
锥形的缩径横断面挡圈(英制系列).补充件 |
(Tapered and reduced cross section retaining rings (Inch series); Addenda) |
| ASME B18.27b Addenda-2000 |
锥形的缩径横断面挡圈(英制系列).补充件 |
(Tapered and reduced cross section retaining rings (Inch series); Addenda) |
| ASME B18.29.1 Errata-1995 |
英制螺旋线圈螺钉用螺纹垫片.空转和螺钉锁定.正误表 |
(Helical coil screw thread inserts - Free running and screw locking (Inchs series)) |
| ASME B18.29.1-1993 |
英制螺旋线圈螺钉用螺纹垫片.空转和螺钉锁定 |
(Helical coil screw thread inserts - Free running and screw locking (Inchs series)) |
| ASME B18.3-1998 |
六角键和花键圆柱头内六角有肩定位螺钉(英制系列) |
(Socket cap, shoulder, and set screws, hex and spline keys (Inch series)) |
| ASME B18.3.1M-1986 |
米制凹头带帽螺钉 |
(Socket head cap screws (Metric series)) |
| ASME B18.3.2M-1979 |
米制六角板手和板手头 |
(Metric series hexagon keys and bits) |
| ASME B18.3.3M-1986 |
米制六角凹头有肩螺钉 |
(Hexagon socket head shoulder screws (Metric series)) |
| ASME B18.3.4M-1986 |
米制内六角圆头带帽螺钉 |
(Hexagon socket button head cap screws (Metric series)) |
| ASME B18.3.5M-1986 |
米制六角凹头沉头螺钉 |
(Hexagon socket flat countersunk head cap screws (Metric series)) |
| ASME B18.3.6M-1986 |
米制凹头定位螺钉 |
(Metric series socket set screws) |
| ASME B18.5-1990 |
英制圆头螺栓 |
(Round head bolts (Inch series)) |
| ASME B18.5.2.1M Erratum-2003 |
米制圆头短方颈螺栓.技术勘误 |
(Metric round head short square neck bolts; Erratum) |
| ASME B18.5.2.1M Erratum-2003 |
米制圆头短方颈螺栓.技术勘误 |
|
| ASME B18.5.2.1M-1996 |
米制圆头短方颈螺栓 |
(Metric round head short square neck bolts) |
| ASME B18.5.2.2M-1982 |
米制圆头方颈螺栓 |
(Metric round head square neck bolts) |
| ASME B18.5.2.3M-1990 |
带大头的米制圆头方颈螺栓 |
(Round head square neck bolts with large head (Metric series)) |
| ASME B18.6.1-1981 |
英制木螺钉 |
(Wood screws (Inch series)) |
| ASME B18.6.2-1998 |
开槽圆头螺钉、方头定位螺钉和开槽无头定位螺钉(英制系列) |
(Slotted head cap screws, square head set screws, and slotted headless set screws (Inch series)) |
| ASME B18.6.3-2003 |
机用螺钉和机用螺母 |
|
| ASME B18.6.5M-2000 |
米制螺纹形和螺纹自攻丝螺钉 |
(Metric thread-forming and thread-cutting tapping screws) |
| ASME B18.7-1972 |
通用半空心铆钉，全空心铆钉，开口铆钉及铆钉帽 |
(General purpose semi-tubular rivets, full tubular rivets, split rivets and rivet caps) |
| ASME B18.7.1M-1984 |
米制通用半空心铆钉 |
(Metric general purpose semi-tubular rivets) |
| ASME B18.8.1 Errata-1995 |
U形夹销和开尾销(英制).勘误 |
(Clevis pins and cotter pins (Inch series); Errata) |
| ASME B18.8.1-1994 |
U形夹销和开尾夹销 |
(Clevis pins and cotter pins (Inch series)) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com