标准号 |
中文名称 |
英文名称 |
ANSI/ASME B31.4-2002 |
烃类、液化石油气、无水氨和醇类用液体输送系统 |
(Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia, and Alcohols ) |
ANSI/ASME B31.8-2003 |
气体输送和分配管道系统 |
(Gas Transmission and Distribution Piping Systems ) |
ANSI/ASME B31.8S-2004 |
燃气管道的管理系统完整性 |
|
ANSI/ASME B31.8S-2004 |
燃气管道的管理系统完整性 |
|
ANSI/ASME B31.9-2004 |
建筑物服务设施用压力管道标准 |
|
ANSI/ASME B36.10M-2004 |
焊接锻钢管和无缝锻钢管 |
|
ANSI/ASME B36.19M-2004 |
不锈钢管 |
|
ANSI/ASME B40.200a-2003 |
直读式和遥控温度计 |
(Thermometers, Direct Reading and Remote Reading ) |
ANSI/ASME B46.1-2002 |
表面特征(表面粗糙度、波纹度和扭转度) |
(Surface Texture (Surface Roughness, Waviness, and Lay) ) |
ANSI/ASME B5.52-2003 |
GAP型(米制)通用单点机械动力压力机 |
(Presses, General Purpose, Single Point, Gap Type, Mechanical Power (Metric) ) |
ANSI/ASME B5.54-2003 |
计算机数控加工中心机床性能评定方法 |
(Performance Evaluation of Computer Numerically Controlled Machining Centers, Methods for ) |
ANSI/ASME B5.54-2005 |
计算机数字控制的组合加工中心机床的性能评定方法 |
|
ANSI/ASME B5.60.1-2002 |
工件夹具.爪式夹具.第1部分:一般说明和术语定义 |
(Workholding Chucks - Jaw Type Chucks, Part 1: General Description and Definitions of Terms ) |
ANSI/ASME B5.60.4-2002 |
工件夹具.爪式夹具.第4部分:性能试验 |
(Workholding Chucks - Jaw Type Chucks, Part 4: Performance Testing ) |
ANSI/ASME B5.60a-2005 |
工件夹具.爪式夹具(附录) |
|
ANSI/ASME B5.61-2003 |
通用单向压制直边型凹版速印机 |
(Power Presses - General Purpose Single Action Straight Side Type ) |
ANSI/ASME B56.1-2004 |
低升力和高升力货车 |
|
ANSI/ASME B56.1b-2003 |
低起升和高起升车辆 |
(Low Lift and High Lift Trucks ) |
ANSI/ASME B56.5-2004 |
工业导向车辆的安全标准和载人工业车辆的自动化功能 |
|
ANSI/ASME B56.6-2002 |
不平地带用的叉车 |
(Rough Terrain Forklift Trucks ) |
ANSI/ASME B73.2M-2003 |
化工用立式直列式离心泵规范 |
(Vertical In-Line Centrifugal Pumps for Chemical Process, Specifications for ) |
ANSI/ASME B73.3M-2003 |
不密封卧式端吸装置规范 |
(Specification for Sealless Horizontal End Suction ) |
ANSI/ASME B89.1.6M, Rev.2-2002 |
用作校准环规和环规的合格普通内径的测量 |
(Qualified Plain Internal Diameters for Use as Master Rings and Ring Gages, Measurement of ) |
ANSI/ASME B89.4.22-2004 |
铰接臂坐标测量机械的性能评价方法 |
|
ANSI/ASME B89.7.3.3-2002 |
尺寸测量不可靠声明的可信赖性评估导则 |
(Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements ) |
ANSI/ASME BPE-2002 |
生物加工设备 |
Bioprocessing Equipment |
ANSI/ASME BPEa-2004 |
生物处理设备 |
|
ANSI/ASME BPVC Edition-2001 |
ASME锅炉和压力容器编码 |
ASME Boiler and Pressure Vessel Code |
ANSI/ASME BPVCRevision Addenda-2002 |
ASME锅炉和压力容器编码(9/14/01 mtg) |
(ASME Boiler and Pressure Vessel Code (9/14/01 mtg) ) |
ANSI/ASME BPVCRevision-2004 |
ASME锅炉和压力容器代码.第7节 |
|
ANSI/ASME BPVCRevision-2004 |
ASME锅炉和压力容器代码.第7节 |
|
ANSI/ASME BPVCRevision-2005 |
ASME锅炉和压力容器代码 |
|
ANSI/ASME CSD-1-2002 |
自动点火锅炉用控制和安全设备 |
Controls and Safety Devices for Automatically Fired Boilers |
ANSI/ASME CSD-1-2004 |
自动点火锅炉用控制和安全设备 |
|
ANSI/ASME CSD-1-2004 |
自动点火锅炉用控制和安全设备 |
|
ANSI/ASME HPS-1994 |
高压系统 |
High Pressure Systems |
ANSI/ASME HPS-2003 |
高压系统 |
(High Pressure Systems ) |
ANSI/ASME HST-1M-1989 |
电动环链起重机性能标准 |
Performance Standard for Electric Chain Hoists |
ANSI/ASME HST-2M-1989 |
手链式人工操作环链起重机性能标准 |
Performance Standard for Hand Chain Manually Operated Chain Hoists |
ANSI/ASME HST-3M-1991 |
手柄式人工操作环链起重机性能标准 |
Performance Standard for Manually Lever-Operated Chain Hoists |
ANSI/ASME HST-4M-1991 |
悬吊式电动缆索起重机性能标准 |
Performance Standard for Overhead Electric Wire Rope Hoists |
ANSI/ASME HST-5M-1991 |
气动环链起重机性能标准 |
Air Chain Hoists |
ANSI/ASME HST-6M-1986 |
气动钢索起重机性能标准 |
Performance Standard for Air Wire Rope Hoists |
ANSI/ASME MC 88.1-1972 |
压力传感器的动态校准导则 |
Dynamic Calibration of Pressure Transducers, Guide for |
ANSI/ASME MC 88.2-1974 |
容器水位测定皮尺和探深尺台架校准程序 |
Bench Calibration of Tank Level Gaging Tapes and Sounding Rules, Procedure for (formerly designated as ANSI B88.2) |
ANSI/ASME MFC-10M-1994 |
确定安装对流量计的影响方法 |
Method for Establishing Installation Effects on Flowmeters |
ANSI/ASME MFC-11M-1989 |
利用科氏质量流量计测量液体流量 |
Measurement of Fluid Flow By Means of Coriolis Mass Flowmeters |
ANSI/ASME MFC-11M-2003 |
用科氏流量计测量液体流量 |
(Measurement of Fluid Flow by Means of Coriolis Flowmeters ) |
ANSI/ASME MFC-14M-1995 |
小孔精确孔板仪测量液体流量 |
Measurement of Fluid Flow Using Small Bore Precision Orifice Meters |
ANSI/ASME MFC-14M-2003 |
小孔精确孔板仪测量液体流量 |
(Measurement of Fluid Flow Using Small Bore Precision Orifice Meters ) |
ANSI/ASME MFC-16M-1995 |
用电磁流量仪测量封闭管道中液体流量 |
Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters |
ANSI/ASME MFC-18M-2001 |
用可变面积计量计测量管道中的液体流量 |
Measurement of Fluid Flow in Pipes Using Variable Area Meters |
ANSI/ASME MFC-1M-1991 |
液体流量测量用术语汇编 |
Measurement of Fluid Flow, Glossary of Terms Used in the |
ANSI/ASME MFC-1M-2003 |
液体流量测量用术语汇编 |
(Measurement of Fluid Flow, Glossary of Terms Used in the ) |
ANSI/ASME MFC-3M-1-2004 |
用孔板、喷嘴和文杜利流量计测量管道中液体流量.第1部分:总则 |
|
ANSI/ASME MFC-3M-2-2004 |
用孔板、喷嘴和文杜利流量计测量管道中液体流量.第2部分:孔板 |
|
ANSI/ASME MFC-3M-3-2004 |
用孔板、喷嘴和文杜利流量计测量管道中液体流量.第3部分:喷嘴和文杜利喷嘴 |
|
ANSI/ASME MFC-3M-4-2004 |
用孔板、喷嘴和文杜利流量计测量管道中液体流量.第4部分:文杜利流量计 |
|
ANSI/ASME MFC-4M-1986 |
涡轮仪测量气体流量 |
Measurement of Gas Flow by Turbine Meters |
ANSI/ASME MFC-5M-1985 |
利用过渡时间超声流量计测量密封管道中的液体流量 |
Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flow Meters, Measurement of |
ANSI/ASME MFC-6M-1998 |
用涡流流量计测量管道中的液体流量 |
Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of |
ANSI/ASME MFC-7M-1987 |
利用临界流量文氏喷嘴管测量气体流量 |
Gas Flow by Means of Critical Flow Venturi Nozzles, Measurement of |
ANSI/ASME MFC-8M-1988 |
密封管道中液体流量.主设备和副设备之间压力信号传导的连接 |
Fluid Flow in Closed Conduits - Connections for Pressure Signal Transmission Between Primary and Secondary Devices |
ANSI/ASME MH 1.1.2-1996 |
涉及托盘及相关结构的定义和术语 |
Definitions and Terminology Covering Pallets and Related Structures |
ANSI/ASME MH 1.2.2M-1989 |
托盘尺寸 |
Pallet Sizes |
ANSI/ASME MH 1.4.1M-1996 mh 1-1997 |
托盘试验程序 |
Procedures for Testing Pallets |
ANSI/ASME MH 1.5M-1993 |
薄衬纸 |
Slip Sheets |
ANSI/ASME MH 1.6-1996 mh 1-1997 |
木制托盘和相关结构耐久性测定用标准程序 |
Standard Procedures for Determination of Durability of Wooden Pallets and Related Structures |
ANSI/ASME MH 1.7M-1996 mh 1-1997 |
托盘及相关结构的组配用传动紧固件 |
Driven Fasteners for Assembly of Pallets and Related Structures |
ANSI/ASME MH 1.8M-1996 |
木制托盘 |
Wood Pallets |
ANSI/ASME MH 1a Part IV-1998 |
出口商品用托盘 |
Export Pallets |
ANSI/ASME MH 1b-2000 |
成组货件用托盘、滑板和其他底座 |
Pallets, Slip Sheets, and Other Bases for Unit Loads |
ANSI/ASME MH1-2003 |
成组货件用托盘、滑板和其它基板 |
(Pallets, Slip Sheets, and Other Bases for Unit Loads ) |
ANSI/ASME MH1-2005 |
成组货件用托盘、滑板和其它基板 |
|
ANSI/ASME N 278.1-1975 |
与安全相关的自动和机动阀门功能规范标准 |
Self-Operated and Power Operated Safety-Related Valves Functional Specification Standard |
ANSI/ASME N 509-1989 |
核电厂空气净化设备和部件 |
Nuclear Power Plant Air Cleaning Units and Components |
ANSI/ASME N 510-1989 |
核空气净化系统的测试 |
Testing of Nuclear Air-Cleaning Systems |
ANSI/ASME N 626.3-1993 |
特殊专业工程师的资格鉴定和责任 |
Qualifications and Duties of Specialized Professional Engineers |
ANSI/ASME N509-2002 |
核电厂空气净化设备和部件 |
(Nuclear Power Plant Air Cleaning Units and Components ) |
ANSI/ASME NOG-1-2002 |
桥式和门式起重机(支承桥和多横梁)的制造规则 |
Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder), Rules for Construction of |
ANSI/ASME NOG-1-2004 |
桥式和门式起重机(支承桥和多横梁)的制造规则 |
|
ANSI/ASME NQA-1-2004 |
核设施的质量保证要求 |
|
ANSI/ASME NQA-1a-2002 |
核设施的质量保证要求 |
(Quality Assurance Requirements for Nuclear Facility Applications ) |
ANSI/ASME NUM-1-1996 |
起重机、单轨铁路和提升机的制造规则(带有悬桥或悬挂式吊车或悬挂式提升机) |
Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type) |
ANSI/ASME NUM-1-2004 |
起重机、单轨吊车和提升机的制造规则(带有悬桥或悬挂式吊车或悬挂式提升机) |
|
ANSI/ASME NUM-1a-2002 |
起重机、单轨和提升机的建造规则 |
(Rules for Construction of Cranes, Monorails and Hoists ) |
ANSI/ASME NUM-1b-2002 |
起重机、单轨铁路和提升机的制造规则 |
(Rules for Construction of Cranes, Monorails, and Hoists ) |
ANSI/ASME OM Code-2001 |
核动力工厂的维护和操作 |
Operation and Maintenance of Nuclear Power Plants |
ANSI/ASME OM-1990 |
核电站的运行和养护 |
Operation and Maintenance of Nuclear Power Plants |
ANSI/ASME OM-S/Ga-2001 |
核动力工厂的维护和操作的标准和指南 |
Standards and Guides for Operation and Maintenance of Nuclear Power Plants |
ANSI/ASME OM-S/Ga-2004 |
核电站的运行和维护的标准和指南 |
|
ANSI/ASME OMaCode-2005 |
核电厂的操作和维修规范 |
|
ANSI/ASME OMb-S/G-2003 |
核电站的操作和维修标准和指南 |
(Standards and Guides for Operation and Maintenance of Nuclear Power Plants ) |
ANSI/ASME OMb-S/G-2005 |
核电厂操作和维护的标准和指南 |
|
ANSI/ASME OMbCode-2003 |
核电站的操作和维修 |
(Operation and Maintenance of Nuclear Power Plants ) |
ANSI/ASME OMCode-2004 |
核电厂的维护和操作标准 |
|
ANSI/ASME PALD-1997 |
便携式自动提升装置 |
Portable Automotive Lifting Devices |
ANSI/ASME PALD-2003 |
便携式自动提升装置 |
(Portable Automotive Lifting Devices ) |
ANSI/ASME PALDb-2002 |
可移动自动升降装置 |
Portable Automotive Lifting Devices |
ANSI/ASME PCC-1-2000 |
压力界限法兰连接接头组件的导则 |
Guidelines for Pressure Boundary Bolted Flange Joint Assembly |
ANSI/ASME PTC 10-1974 |
性能测试规范.压缩机及排气机 |
Performance Test Code - Compressors and Exhausters |
ANSI/ASME PTC 10.1-1997 |
压缩机和排气器的临时试验标准 |
Interim Test Code on Compressors and Exhausters |
ANSI/ASME PTC 11-1984 |
风扇 |
Fans |
ANSI/ASME PTC 12.1-1978 |
性能测试规范.密封式供水加热器 |
Performance Test Code - Closed Feedwater Heaters |
ANSI/ASME PTC 12.2-1998 |
蒸汽冷凝装置的性能试验标准 |
Performance Test Code - Steam-Condensing Apparatus |
ANSI/ASME PTC 12.3-1997 |
空气分离器 |
Deaerators |
ANSI/ASME PTC 12.4-1992 |
脱湿器再热炉 |
Moisture Separator Reheaters |
ANSI/ASME PTC 12.5-2000 |
单相热交换器 |
Single Phase Heat Exchangers |
ANSI/ASME PTC 14-1970 |
性能测试规范.蒸发装置 |
Performance Test Code - Evaporating Apparatus |
ANSI/ASME PTC 16-1958 |
性能测试规范.气体发生器和连续气体发生器 |
Performance Test Code - Gas Producers and Continuous Gas Generators |
ANSI/ASME PTC 17-1973 |
性能试验规范.往复式内燃机 |
Performance Test Code - Reciprocating Internal-Combustion Engines |
ANSI/ASME PTC 18-1992 |
水轮机 |
Hydraulic Turbines |
ANSI/ASME PTC 19.1-1998 |
测量不确定度.仪器和装置 |
Measurement Uncertainty - Instruments and Apparatus |
ANSI/ASME PTC 19.11-1997 |
动力循环中水和蒸汽的取样、调节和分析 |
Steam and Water Sampling, Conditioning and Analysis in the Power Cycle |
ANSI/ASME PTC 19.2-1987 |
压力测量仪器仪表.第2部分 |
Pressure Measurement Instruments and Apparatus - Part 2 |
ANSI/ASME PTC 19.22-1986 |
仪器仪表.数字系统技术 |
Instruments and Apparatus - Digital Systems Techniques |
ANSI/ASME PTC 19.23-1980 |
模型试验指导手册.仪器仪表 |
Guidance Manual for Model Testing - Instruments and Apparatus |
ANSI/ASME PTC 19.3-1974 |
性能测试规范.温度测量 |
Performance Test Code - Temperature Measurement |
ANSI/ASME PTC 19.7-1980 |
轴功率测量.仪器仪表 |
Measurement of Shaft Horsepower - Instruments and Apparatus |
ANSI/ASME PTC 19.8-1970 |
性能测试规范.测量指示功率用仪器仪表 |
Performance Test Code - Measurement of Indicated Power, Instruments and Apparatus |