编号 | 中文名称 | 英文名称 |
BS 1041-3-1989 | 温度测量.第3部分:工业用电阻温度计的选择和使用指南 | (Temperature measurement - Guide to selection and use of industrial resistance thermometers) |
BS 1041-4-1992 | 温度测量.热电偶选择和使用指南 | (Temperature measurement - Guide to the selection and use of thermocouples) |
BS 1041-5-1990 | 温度测量.第5部分:辐射高温计选择和使用指南 | (Temperature measurement - Guide to selection and use of radiation pyrometers) |
BS 1041-7-1988 | 温度测量.第7部分:温度/时间指示器的选择和使用指南 | (Temperature measurement - Guide to selection and use of temperature/time indicators) |
BS 1042-1.4-1992 | 封闭管道内液体流量的测量.第1部分:压差器件.第4节:第1和2节所述器件的使用指南 | (Measurement of fluid flow in closed conduits - Pressure differential devices - Guide to the use of devices specified in Sections 1.1 and 1.2) |
BS 1042-2.1-1983 | 封闭管道内液体流量的测量.第2部分:速度面积法.第1节:采用皮托静压管的方法 | (Measurement of fluid flow in closed conduits - Velocity area methods - Method using Pitot static tubes) |
BS 1042-2.2-1983 | 封闭管道内液体流量的测量.第2部分:速度面积法.第2节:圆形截面管道中某一点的流速测量方法 | (Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of velocity at one point of a conduit of circular cross section) |
BS 1042-2.3-1984 | 封闭管道内液体流量的测量.第2部分:速度面积法.第3节:用流量计或皮托静压管在圆形管道中的涡流或不平衡流动 | (Measurement of fluid flow in closed conduits - Velocity area methods - Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot stati) |
BS 1042-2.4-1989 | 封闭管道内液体流量的测量.第2部分:速度面积法.第4节:在正常流动条件下利用全流动导管中的流量计测量清洁水 | (Measurement of fluid flow in closed conduits - Velocity area methods - Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions) |
BS 1044-1-1964 | 量规坯件规范.塞规、环规与卡规 | (Specificaton for gauge blanks - Plug, ring and calliper gauges) |
BS 105-1919 | 轻型和重型桥梁式铁路钢轨 | (Light and heavy bridge type railway rails) |
BS 1050-1984 | 通讯设备用和类似用途的指示灯规范 | (Specification for indicator lamps for use in telecommunication apparatus and for allied purposes) |
BS 1051-1992 | 有关纺织品质量测定的术语词汇 | (Glossary of terms relating to the mass determination of textiles) |
BS 1052-1980 | 一般工程用的低碳钢丝规范 | (Specification for mild steel wire for general engineering purposes) |
BS 1054-1975 | 外部测量用工程比较仪规范 | (Specification for engineers’ comparators for external measurement) |
BS 1070-1993 | 黑漆(焦油漆)规范 | (Specification for black paint (tar-based)) |
BS 1083-1965 | 精密六角螺拴、螺钉与螺母(B.S.W和B.S.F 螺纹)规范 | (Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads)) |
BS 1088-1-2003 | 船用胶合板.要求 | (Marine plywood - Requirements) |
BS 1088-2-2003 | 船用胶合板.用刀齿试验测定粘结质量 | (Marine plywood - Determination of bonding quality using the knife test) |
BS 1089-1973 | 外圆、内圆与万能磨床用转盘轴头规范 | (Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types) |
BS 1090-1970 | 矿用手持式防火电动钻机规范 | (Specification for flameproof hand-held electric drilling machines primarily for use in mines) |
BS 1098-2-1976 | 钻套规范.米制件 | (Specification for jig bushes - Metric units) |
BS 1101-1977 | 涂料和其他类似物质用压力容器规范 | (Specification for pressure containers for paint and other similar substances) |
BS 1103-1989 | 橡胶软管加固用织物的规范 | (Specification for fabrics for the reinforcement of rubber hoses) |
BS 1104-1957 | 一般用梯形螺纹规范 | (Specification for general purpose Acme screw threads) |
BS 1109-1943 | 冷密接用冷锻低碳钢铆钉规范 | (Specification for cold forged mild steel rivets for cold closing) |
BS 1117-2-1964 | 精密电气设备用裸细电阻丝规范.第2部分:米制件 | (Specification for bare fine resistance wire for precision electrical equipment - Metric units) |
BS 1123-1-1987 | 压缩空气或惰性气体装置用安全阀、计量表和易熔塞.第1部分:安装实用规程 | (Safety valves, gauges and fusible plugs for compressed air or inert gas installations - Code of practice for installation) |
BS 1125-1987 | 厕所冲洗水箱(包括两用冲洗水箱与冲洗管)规范 | (Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)) |
BS 1127-1-1990 | 螺丝板牙和螺母状板牙.第1部分:手用和机用圆形螺丝板牙和手用板牙柄规范 | (Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies and hand-operated die stocks) |
BS 1127-2-1990 | 螺丝板牙和螺母状板牙.手用和机用锥形管螺纹用圆形螺丝板牙规范;R系列 | (Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for taper pipe threads; R Series) |
BS 1127-3-1990 | 螺丝板牙和螺母状板牙.手用和机器操作平行管螺纹用圆形螺丝板牙规范;G系列 | (Screwing dies and dienuts - Specification for hand- and machine-operated circular screwing dies for parallel pipe threads; G series) |
BS 1127-4-1990 | 螺丝板牙和螺母状板牙.圆形螺丝板牙术语 | (Screwing dies and dienuts - Terminology for circular screwing dies) |
BS 1127-5-1990 | 螺丝板牙和螺母状板牙.六角形螺母状板牙尺寸规范 | (Screwing dies and dienuts - Specification for dimensions of hexagon dienuts) |
BS 1132-1987 | 自动移液管规范 | (Specification for automatic pipettes) |
BS 1133 Secs.1 to 3-1989 | 包装规程.第1-3节:包装导论 | (Packaging code - Introduction to packaging) |
BS 1133-10.1-1990 | 包装规程.第10节:金属容器.第1小节:马口铁制容器和罐、盒、桶等 | (Packaging code - Metal containers - Tins and cans) |
BS 1133-10.2-1991 | 包装规程.第10节:金属容器.第2小节:铁桶 | (Packaging code - Metal containers - Metal drums) |
BS 1133-12-1986 | 包装规程.第12节:防震方法(减震装置除外) | (Packaging code - Methods of protection against shock (excluding cushioning devices)) |
BS 1133-14-1985 | 包装规程.胶粘结合和密封带 | (Packaging code - Adhesive closing and sealing tapes) |
BS 1133-15-1991 | 包装规程.第15节:包装带 | (Packaging code - Tensional strapping) |
BS 1133-16-1987 | 包装规程.第16节:包装用粘胶剂 | (Packaging code - Adhesives for packaging) |
BS 1133-18-1991 | 包装规程.第18节:玻璃包装 | (Packaging code - Packaging in glass) |
BS 1133-19-1986 | 包装规程.包装中使用的干燥剂 | (Packaging code - Use of desiccants in packaging) |
BS 1133-1986 | 包装规程.第19节:包装中干燥剂的使用 | (Packaging code. Use of desiccants in packaging) |
BS 1133-21-1991 | 包装规程.第21节:再生纤维素薄膜,塑料薄膜,铝箔,挠性多层板和金属化材料 | (Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials) |
BS 1133-22-1989 | 包装规程.第22节:塑料容器包装 | (Packaging code - Packaging in plastics containers) |
BS 1133-4-1991 | 包装规程.包装件搬运的机械设备 | (Packaging code - Mechanical aids in package handling) |
BS 1133-5-1985 | 包装规程.第5节:防止微生物、昆虫、蜱螨和啮齿动物对包装及其内装物品的损坏 | (Packaging code - Protection against spoilage of packages and their contents by micro-organisms, insects, mites and rodents) |
BS 1133-6.1-1991 | 包装规程.第6节:防运输中腐蚀的金属表面的保护.第1小节:金属表面的净化与干燥 | (Packaging code - Protection of metal surfaces against corrosion during transport and storage - Cleaning and drying of metal surfaces) |
BS 1133-6.2-1991 | 包装规程.第6节:防运输中腐蚀的金属表面的保护.第2小节:临时保护剂及其应用 | (Packaging code - Protection of metal surfaces against corrosion during transport and storage - Temporary protectives and their application) |
BS 1133-7.1-1986 | 包装规程.纸和纸板封皮、袋和容器.包装纸 | (Packaging code - Paper and board wrappers, bags and containers - Wrapping papers) |
BS 1133-7.2-1986 | 包装规程.纸和纸板封皮、袋和容器.袋和封皮 | (Packaging code - Paper and board wrappers, bags and containers - Bags and envelopes) |
BS 1133-7.3-1986 | 包装规程.纸和纸板封皮、袋和容器.纸板箱和盒 | (Packaging code - Paper and board wrappers, bags and containers - Cartons and boxes) |
BS 1133-7.4-1990 | 包装规程.纸和纸板封皮、袋和容器.纤维板卷筒 | (Packaging code - Paper and board wrappers, bags and containers - Fibreboard drums) |
BS 1133-7.5-1991 | 包装规程.纸和纸板包装、袋及容器.纤维板箱和附件 | (Packaging code - Paper and board wrappers, bags and containers - Fibreboard cases and fitments) |
BS 1133-7.6-1988 | 包装规程.第7节:纸和纸板封皮、袋和容器.第6小节:模制纸浆包装 | (Packaging code - Paper and board wrappers, bags and containers - Moulded pulp packaging) |
BS 1133-7.7-1990 | 包装规程.第7节:纸和纸板封皮、袋和容器.第7小节:组合容器 | (Packaging code - Paper and board wrappers, bags and containers - Composite containers) |
BS 1133-8-1991 | 包装规范.第8节:木箱、木盒和木筐 | (Packaging code - Wooden boxes, cases and crates) |
BS 1134-1-1988 | 表面纹理的评定.方法和仪器 | (Assessment of surface texture - Methods and instrumentation) |
BS 1134-2-1990 | 表面纹理的评定.第2部分:导则和一般介绍 | (Assessment of surface texture - Guidance and general information) |
BS 1136-1972 | 低碳钢垃圾箱规范 | (Specification for mild steel refuse storage containers) |
BS 1139-1.2-1990 | 金属脚手架.第1部分:管.第2节:铝管规范 | (Metal scaffolding - Tubes - Specification for aluminium tube) |
BS 1139-2.1-1991 | 金属脚手架.第2部分:联接件.第1节:钢管制操作用脚手架和膺架用的钢联接件松插口和底板的规范 | (Metal scaffolding - Couplers - Specification for steel couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes) |
BS 1139-2.2-1991 | 金属脚手架.第2部分:联接件.第2节:管式脚手架中用的钢的和铝的联接件、配件和附件的规范 | (Metal scaffolding - Couplers - Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding) |
BS 1139-3-1994 | 金属脚手架.预制通路和施工塔架规范 | (Metal scaffolding - Specification for prefabricated mobile access and working towers) |
BS 1139-4-1982 | 金属脚手架.第4部分:预制钢叉架和栈桥 | (Metal scaffolding - Specification for prefabricated steel splitheads and trestles) |
BS 1139-5-1990 | 金属脚手架.第5部分:由预制部件组成的服务和操作用脚手架的材料、尺寸、设计负荷与安全要求规范 | (Metal scaffolding - Specification for materials, dimensions, design loads and safety requirements for service and working scaffolds made of prefabricated elements) |
BS 1140-1993 | 有镀层和无镀层低碳钢电阻点焊规范 | (Specification for resistance spot welding of uncoated and coated low carbon steel) |
BS 115-1995 | 电气用金属电阻材料规范 | (Specification for metallic resistance materials for electrical purposes) |
BS 1153-1992 | 明胶合银型缩微胶片的冲洗和贮存的推荐方法 | (Recommendations for processing and storage of silver-gelatine-type microfilm) |
BS 1154-2003 | 天然橡胶化合物规范 | (Natural rubber compounds - Specification) |
BS 1155-2003 | 挤压用天然橡胶化合物规范 | (Natural rubber compounds for extrusion - Specification) |
BS 1157-1975 | 槽纹用丝锥用螺纹底孔钻头尺寸推荐标准 | (Recommendations for tapping drill sizes for use with fluted taps) |
BS 1161-1977 | 结构用铝合金型材规范 | (Specification for aluminium alloy sections for structural purposes) |
BS 1170-1983 | 船用锅炉的水处理推荐标准 | (Recommendations for treatment of water for marine boilers) |
BS 1179-6-1980 | 燃气工业用术语词汇.第6部分:包括用户燃气装置在内的煤气燃烧和利用 | (Glossary of terms used in the gas industry - Combustion and utilization including installation at consumers’ premises) |
BS 1181-1999 | 粘土烟道端头规范 | (Specification for clay flue terminals) |
BS 1184-1976 | 铜与铜合金存水弯规范 | (Specification - Copper and copper alloy traps) |
BS 1186-2-1988 | 细木工用木材与制品质量.第2部分:制品质量规范 | (Timber for and workmanship in joinery - Specification for workmanship) |
BS 1186-3-1990 | 细木工用木材与制品质量.第3部分:木装饰物及其固定规范 | (Timber for and workmanship in joinery - Specification for wood trim and its fixing) |
BS 1187-1959 | 地板用木块规范 | (Specification for wood blocks for floors) |
BS 1188-1974 | 陶瓷盥洗盆与台座规范 | (Specification for ceramic wash basins and pedestals) |
BS 1191-1-1973 | 建筑用石膏粉饰规范.第1部分:不包括预拌轻质石膏 | (Specification for gypsum building plasters - Excluding premixed lightweight plasters) |
BS 1191-2-1973 | 建筑用石膏粉饰规范.第2部分:预拌轻质石膏 | (Specification for gypsum building plasters - Premixed lightweight plasters) |
BS 1192-5-1998 | 建筑制图.计算机辅助设计(CAD)数据的结构和交换导则 | (Construction drawing practice - Guide for structuring and exchange of CAD data) |
BS 1196-1989 | 田间排水用陶土管及连接管规范 | (Specification for clayware field drain pipes and junctions) |
BS 1197-2-1973 | 混凝土铺地砖和配件规范.第2部分:米制件 | (Specification for concrete flooring tiles and fittings - Metric units) |
BS 1202-1-2002 | 钉子规范.钢钉 | (Specification for nails - Steel nails) |
BS 1202-2-1974 | 钉子规范.第2部分:铜钉 | (Specification for nails - Copper nails) |
BS 1202-3-1974 | 钉子规范.第3部分:铝钉 | (Specification for nails - Aluminium nails) |
BS 1203-2001 | 热固酚醛和氨基塑料木材胶粘剂.分类和试验方法 | (Hot-setting phenolic and aminoplastic wood adhesives - Classification and test method) |
BS 1206-1974 | 耐火粘土质洗涤池规范.尺寸与加工质量 | (Specification for fireclay sinks: dimensions and workmanship) |
BS 1210-1963 | 木螺钉规范 | (Specification for wood screws) |
BS 1212-1-1990 | 浮子阀.第1部分:活塞型浮子阀(铜合金阀体)(不含浮子)规范 | (Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats)) |
BS 1212-2-1990 | 浮子阀.第2部分:隔膜型浮子阀(铜合金阀体)(不含浮子)规范 | (Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats)) |
BS 1212-3-1990 | 浮子阀.第3部分:仅供冷水用隔膜型塑料体浮子操作阀(不包括浮子) | (Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)) |
BS 1212-4-1991 | 浮子阀.第4部分:厕所冲水箱用小型浮子阀规范(包含浮子) | (Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats)) |
BS 1214-1977 | 打包麻布砂袋与防霉打包麻布砂袋规范 | (Specification for hessian sandbags and rot-proofed hessian sandbags) |
BS 1217-1997 | 铸石规范 | (Specification for cast stone) |
BS 122-1-1953 | 铣刀.第1部分:铣刀 | (Milling cutters - Milling cutters) |
BS 122-4-1980 | 铣刀.螺纹柄端铣刀和槽钻 | (Milling cutters - Screwed shank end mills and slot drills) |
BS 122-5-1986 | 铣刀.第5部分:安装尺寸和附件规范 | (Milling cutters - Specification for mounting dimensions and accessories) |
BS 122-6-1995 | 铣刀.铣刀杆或铣刀芯轴的互换性尺寸规范 | (Milling cutters - Specification for dimensions for interchangeability of cutter arbors and cutter mandrels) |
BS 1230-1-1985 | 石膏灰泥板.第1部分:不适于作为二次加工材料的灰泥板规范 | (Gypsum plasterboard - Specification for plasterboard excluding materials submitted to secondary operations) |
BS 123000-2001 | 质量评估体系.总规范.印制板 | (System of quality assessment - Generic specification - Printed boards) |
BS 123100-003-2001 | 质量评估体系.性能的详细规范.有光孔的刚性单面和双面印制板 | (System of quality assessment - Capability detail specification - Rigid single-sided and double-sided printed boards with plain holes) |
BS 123100-2001 | 质量评估体系.分规范.有光孔的刚性单面和双面印制板 | (System of quality assessment - Sectional specification - Rigid single-sided and double-sided printed boards with plain holes) |
BS 123200-003-2001 | 质量评估体系.性能的详细规范.有镀通孔的刚性双面印制板 | (System of quality assessment - Capability detail specification - Rigid double-sided printed boards with plated-through holes) |
BS 123200-2001 | 质量评估体系.分规范.有镀通孔的刚性双面印制板 | (System of quality assessment - Sectional specification - Rigid double-sided printed boards with plated-through holes) |
BS 123300-003-2001 | 质量评估体系.性能的详细规范.刚性多层印制板 | (System of quality assessment - Capability detail specification - Rigid multilayer printed boards) |
BS 123300-2001 | 质量评估体系.分规范.刚性多层印制板 | (System of quality assessment - Sectional specification - Rigid multilayer printed boards) |
BS 123400-003-2001 | 质量评估体系.性能的详细规范.无贯穿连接的挠性单面和双面印制板 | (System of quality assessment - Capability detail specification - Flexible single-sided and double-sided printed boards without through-connections) |
BS 123400-2001 | 质量评估体系.分规范.无贯穿连接的挠性单面和双面印制板 | (System of quality assessment - Sectional specification - Flexible single-sided and double-sided printed boards without through-connections) |
BS 123500-003-2001 | 质量评估体系.性能的详细规范.贯穿连接的挠性单面和双面印制板 | (System of quality assessment - Capability detail specification - Flexible Single-sided and double-sided printed boards with through-connections) |
BS 123500-2001 | 质量评估体系.分规范.贯穿连接的挠性单面和双面印制板 | (System of quality assessment - Sectional specification - Flexible single-sided and double-sided printed boards with through-connections) |
BS 123600-003-2001 | 质量评估体系.性能的详细规范.贯穿连接的软-硬性多层印制板 | (System of quality assessment - Capability detail specification - Flex-rigid multilayer printed boards with through-connections) |
BS 123600-2001 | 质量评估体系.分规范.贯穿连接的软-硬性多层印制板 | (System of quality assessment - Sectional specification - Flex-rigid multilayer printed boards with through-connections) |
BS 123700-003-2001 | 质量评估体系.性能的详细规范.贯穿连接的软-硬性双面印制板 | (System of quality assessment - Capability detail specification - Flex-rigid double-sided printed boards with through-connections) |
BS 123700-2001 | 质量评估体系.分规范.贯穿连接的软-硬性双面印制板 | (System of quality assessment - Sectional specification - Flex-rigid double-sided printed boards with through-connections) |