    
|
| 编号 | 中文名称 | 英文名称 |
| BS 2059/2-1957 | 观察记录表.直边花键.底部配件.深底 | (Summary sheet: straight sided splines - Bottom fitting - Deep) |
| BS 2059/3-1957 | 观察记录表.直边花键.内部和外部 | (Summary sheet: straight sided serrations - Internal and external) |
| BS 2061-1953 | 一般工程用磷青铜弹簧垫圈规范 | (Specification for phosphor bronze spring washers for general engineering purposes) |
| BS 2064-1-1976 | 金钢石磨料制品.第1部分:立方氮化硼砂轮规范 | (Diamond and products - Specification for diamond and cubic boron nitride abrasive grinding wheels) |
| BS 2064-2-1976 | 金钢石磨料制品.第2部分:金刚石磨料圆锯和框锯规范 | (Diamond abrasive products - Specification for diamond abrasive circular saws and frame saws) |
| BS 2064-3-1990 | 金刚石磨料制品.第3部分:切割石料和圬工用扇形锯钢锯条的尺寸 | (Diamond abrasive products - Dimensions of steel blades for segmented saws for cutting of stone and masonry) |
| BS 2067-1953 | 绝缘材料的功率因子与电容率的测定(哈特逊和瓦德法) | (Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method)) |
| BS 2068-1970 | 乙酸酐规范 | (Specification for acetic anhydride) |
| BS 2069-1954 | 气体取样管规范 | (Specification for gas sampling tubes) |
| BS 2071-1990 | 索格利特萃取器规范 | (Specification for Soxhlet extractors) |
| BS 2081-1-1998 | 化学药品用橱柜.便携式橱柜 | (Closets for use with chemicals - Specification for portable closets) |
| BS 2081-2-1998 | 化学药品用橱柜.固定安装橱柜 | (Closets for use with chemicals - Specification for permanently installed closets) |
| BS 2087-1-1992 | 纺织品的防腐处理.第1部分:处理规范 | (Preservative textile treatments - Specification for treatments) |
| BS 2087-2-1992 | 纺织品的防腐处理.第2部分:试验方法 | (Preservative textile treatments - Methods of test) |
| BS 2090-1954 | 钩形扳手、销子扳手、连接扳手和相关的槽、孔和柄臂规范 | (Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns) |
| BS 2096-1954 | 沥青碎石路和沥青盖层碎石路机械设备用的燃油旋转干燥器的试验方法 | (Method of testing oil-fired rotary dryers for use in asphalt and coated macadam plant) |
| BS 2099-1989 | 医院设备用脚轮规范 | (Specification for castors for hospital equipment) |
| BS 21-1985 | 管子及配件上的气密螺纹接头的管螺纹规范(米制尺寸) | (Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)) |
| BS 215-1-1970 | 架空电力传输用铝线和钢芯铝线规范.第1部分:铝绞线 | (Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission - Aluminium stranded conductors) |
| BS 215-2-1970 | 架空电力传输用铝线和钢芯铝线规范.第2部分:钢芯铝线 | (Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission - Aluminium conductors, steel-reinforced) |
| BS 217-1961 | 涂料和封填剂用铅丹规范 | (Specification for red lead for paints and jointing compounds) |
| BS 227-1995 | 矿用工字钢钢拱规范 | (Specification for H-section steel arches for use in mines) |
| BS 228-1994 | 短节距传动精密滚子链条和链轮规范 | (Specification for short-pitch transmission precision roller chains and chain wheels) |
| BS 2316 Pts.1 and 2-1968 | 射频电缆规范.一般要求和试验.英国政府服务要求 | (Specification for radio-frequency cables - General requirements and tests - British Government Services requirements) |
| BS 2316-3-1968 | 射频电缆规范.第3部分:电缆数据活页(米制和英制单位) | (Specification for radio-frequency cables - Cable data sheets (metric and imperial units)) |
| BS 235-1987 | 电力牵引用齿轮规范 | (Specification for gears for electric traction) |
| BS 245-1976 | 涂料和其它用途用矿物溶剂(石油溶剂及有关烃类溶剂)规范 | (Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes) |
| BS 2452-1954 | 电驱动高架式移动基座悬臂起重机(高架式门座悬臂起重机)规范 | (Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes)) |
| BS 2453-1973 | 轮辐用钢丝规范 | (Specification for steel wire for spokes) |
| BS 2456-1990 | 冷水用浮子操作阀浮子(塑料制品)规范 | (Specification for floats (plastics) for float operated valves for cold water services) |
| BS 2457-1975 | 制图室用分度规规范 | (Specification for protractors for drawing office use) |
| BS 2459-1974 | 制图室用三角板(固定的、可调节的)规范 | (Specification for set squares (fixed and adjustable) for drawing office use) |
| BS 2461-1983 | 洗气瓶规范 | (Specification for gas washing bottles) |
| BS 2463-1-1990 | 医疗用输液设备.第1部分:投药用成套装置规范 | (Transfusion equipment for medical use - Specification for collapsible containers for blood and blood components) |
| BS 2463-2-1989 | 医用输血设备.第2部分:给药装置规范 | (Transfusion equipment for medical use - Specification for administration sets) |
| BS 2464-1954 | 汽油、石油和润滑剂用软管接头(公称尺寸 3/4英寸至 4英寸)规范 | (Specification for hose couplings for petrol, oil and lubricants () |
| BS 2464-2-1969 | 汽油、石油和润滑剂用软管接头规范.第2部分:高压接头 | (Specification for hose couplings for petrol, oil and lubricants - High pressure couplings) |
| BS 2464-3-1968 | 汽油、石油和润滑剂用软管接头规范.第3部分:快速接头 | (Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings) |
| BS 2464-4-1980 | 汽油、石油和润滑剂用软管接头规范.第4部分:欧洲型 100mm快速接头规范 | (Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type) |
| BS 2468-1-1994 | 农业机械和器具的分类和术语集.动力和牵引单位 | (Glossary of terms and classification relating to agricultural machinery and implements - Power and tractive units) |
| BS 2468-3-1995 | 有关农业机械和器具的分类和术语汇编.第3部分:整地机具动 | (Glossary of terms and classification relating to agricultural machinery and implements - Soil working equipment) |
| BS 2470-1973 | 英制系列六角凹头螺钉和套筒扳手规范.英制系列 | (Specification for hexagon socket screws and wrench keys - Inch series) |
| BS 2474-1993 | 工业用化学药品命名的推荐方法 | (Recommendations for names for chemicals used in industry) |
| BS 248-1969 | 矿用轻型轨和鱼尾板规范 | (Specification for light rails and fishplates for use at mines) |
| BS 2481-4-1985 | 打字机.第4部分:术语词汇 | (Typewriters. Glossary of terms) |
| BS 2482-1981 | 木制脚手架规范 | (Specification for timber scaffold boards) |
| BS 2483-1977 | 跨床台规范 | (Specification for overbed tables) |
| BS 2484-1985 | 混凝土与粘土制直形电缆沟盖规范 | (Specification for straight concrete and clayware cable covers) |
| BS 2485-1987 | T形槽、T形螺栓、T形螺母与榫舌规范 | (Specification for tee slots, tee bolts, tee nuts and tenons) |
| BS 2486-1997 | 蒸汽锅炉和水加热器的水处理推荐规范 | (Recommendations for treatment of water for steam boilers and water heaters) |
| BS 2488-1966 | 电信设备用电阻器的电阻与电容器的电容优选数值表 | (Schedule of preferred numbers for the resistance of resistors and the capacitance of capacitors for telecommunication equipment) |
| BS 2499-1-1993 | 混凝土路面的热敷接缝密封系统.接缝密封剂规范 | (Hot-applied joint sealant systems for concrete pavements - Specification for joint sealants) |
| BS 2499-2-1992 | 混凝土路面用热接密封系统.第2部分:密接胶剂的实用规程 | (Hot-applied joint sealant systems for concrete pavements - Code of practice for the application and use of joint sealants) |
| BS 2499-3-1993 | 混凝土路面的热敷接缝密封系统.试验方法 | (Hot-applied joint sealant systems for concrete pavements - Methods of test) |
| BS 2501-1992 | 商业用封闭式冷冻贮舱规范 | (Specification for commercial refrigerated storage cabinets of the closed reach-in type) |
| BS 2502-1979 | 人可进入式分段冷藏间的制造规范 | (Specification for manufacture of sectional cold rooms (walk-in type)) |
| BS 2511-1970 | 水的测定方法(卡尔费歇尔法) | (Methods for the determination of water (Karl Fischer method)) |
| BS 2518-1-1954 | 旋转成型铲齿铣刀规范.第1部分:径节 | (Specification for rotary form relieved gear cutters - Diametral pitch) |
| BS 2518-2-1977 | 旋转成型铲齿铣刀规范.第2部分:米制模数 | (Specification for rotary form relieved gear cutters - Metric module) |
| BS 2519-2-1976 | 齿轮词汇.第2部分:标志方法 | (Glossary for gears - Notation) |
| BS 2520-1983 | 气压计标准条件.修正表及其应用 | (Specification for barometer conventions and tables, their application and use) |
| BS 2523-1966 | 铅基底漆规范 | (Specification for lead-based priming paints) |
| BS 2538-1954 | 高压供电系统用的气冷防火单相照明变压器装置规范 | (Specification for air-cooled flameproof single-phase lighting transformer units supplied from high voltage systems) |
| BS 2540-1991 | 粒状硅胶干燥剂规范 | (Specification for granular desiccant silica gel) |
| BS 2543-1995 | 室内装饰用机织物与针织物规范 | (Specification for woven and knitted fabrics for upholstery) |
| BS 2543-2004 | 最终用户使用的装饰性织物.分类 | |
| BS 2548-1986 | 一般包装用木丝规范 | (Specification for wood wool for general packaging purposes) |
| BS 2554-1987 | 检测血沉速度用韦斯特格伦氏管和支架规范 | (Specification for Westergren tubes and support for the measurement of erythrocyte sedimentation rate) |
| BS 2556-1973 | 手摇钻与胸压手摇钻规范 | (Specification for hand and breast drills) |
| BS 2558 Supplement No. 1-1968 | 米制尺寸 | (Metric sizes) |
| BS 2558-1954 | 管状套筒扳手规范 | (Specification for tubular box spanners) |
| BS 2559-1994 | 旋具及旋具附件的规范 | (Specification for screwdrivers and screwdriver accessories) |
| BS 2559-3-1973 | 螺钉旋具规范.绝缘螺钉旋具 | (Specification for screwdrivers - Insulated screwdrivers) |
| BS 2562-1979 | 变压器与电抗器用电缆箱规范 | (Specification for cable boxes for transformers and reactors) |
| BS 2565-1972 | 电气用绝缘绕组线线盘与绝缘带绕带盘规范 | (Specification for drums for covered winding wires and strips for electrical purposes) |
| BS 2567-1997 | 非电动力驱动的钢辊式输送机 | (Specification for non-powered roller conveyors) |
| BS 2569-2-1965 | 金属喷涂规范.第2部分:保护钢铁免受高温下腐蚀和氧化 | (Specification for sprayed metal coatings - Protection of iron and steel against corrosion and oxidation at elevated temperatures.) |
| BS 2571-1990 | 一般用途模制和挤压挠性聚氯乙烯混合料规范 | (Specification for general-purpose flexible PVC compounds for moulding and extrusion) |
| BS 2573-1-1983 | 起重机设计规程.第1部分:结构的分类、应力计算和设计准则规范 | (Rules for the design of cranes - Specification for classification, stress calculations and design criteria for structures) |
| BS 2573-2-1980 | 起重机设计规程.第2部分:机械的分类、应力计算和设计规范 | (Rules for the design of cranes - Specification for classification, stress calculations and design of mechanisms) |
| BS 2574-1-1991 | 下肢矫正器材.第1部分:下肢矫正器材(不包括脚矫正器材)的设计和制造导则 | (Lower limb orthoses - Guide to the design and manufacture of lower limb orthoses, excluding foot orthoses) |
| BS 2574-2-1994 | 下肢矫正法.第2部分:下肢矫正用髋部,膝和踝关节规范 | (Lower limb orthoses - Specification for hip, knee and ankle joints for lower limb orthoses) |
| BS 2580-1979 | 冷水户给水管用地下旋塞规范 | (Specification for underground plug cocks for cold water services) |
| BS 2583-1955 | 罗奇板手规范 | (Specification for podger spanners) |
| BS 2585-1975 | 牙科射线照相胶片的尺寸规范 | (Specification for sizes of film for dental radiography) |
| BS 2586-1979 | pH值测量用的玻璃电极与参比电极规范 | (Specification for glass and reference electrodes for the measurement of pH) |
| BS 2588-1-1992 | 卫生保健机构用便携式便盆.第1部分:可重复使用的卧床用便盆规范 | (Portable sanitary pans for use in healthcare establishments - Specification for reusable bed pans) |
| BS 2588-2-1992 | 卫生保健机构用便携式便盆.第2部分:可重复使用的坐椅式便盆规范 | (Portable sanitary pans for use in healthcare establishments - Specification for reusable pans for commode chairs) |
| BS 2589-1955 | 铁路轨道扳手规范 | (Specification for railway track spanners) |
| BS 2593-1974 | 旋转钻杆与碳化钨硬质合金旋转钻头规范 | (Specification for rotary drill rods and tungsten carbide tipped rotary drill bits) |
| BS 2598-4-1980 | 玻璃器皿、管道与配件.第4部分:玻璃器皿零件规范 | (Glass plant, pipeline and fittings - Specification for glass plant components) |
| BS 2606-1955 | 峰值为150kV及以下医疗诊断用 X射线防护手套规范 | (Specification for X-ray protective gloves for medical diagnostic purposes up to 150 kV peak) |
| BS 2610-1978 | 棉与某些纤维素系化学纤维的铜铵溶液流动性的测定试验方法 | (Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres) |
| BS 2618-1975 | 电力牵引装置规范 | (Specification for electric traction equipment) |
| BS 2621-5-1979 | 甘油规范 | (Specifications for glycerol) |
| BS 2626-1992 | 制冷压缩机用润滑油规范 | (Specification for lubricants for refrigerant compressors) |
| BS 2627-1970 | 电工用锻铝规范.线材 | (Specification for wrought aluminium for electrical purposes - Wire) |
| BS 2633-1987 | 输送流体用铁素体钢管道工程的一级电弧焊规范 | (Specification for Class I arc welding of ferritic steel pipework for carrying fluids) |
| BS 2634-1-1987 | 表面粗糙度比较试样.第1部分:车、磨、镗、铣、成型和刨削试样规范 | (Roughness comparison specimens - Specification for turned, ground, bored, milled, shaped and planed specimens) |
| BS 2634-2-1987 | 表面粗糙度比较试样.第2部分:电火花加工、喷丸清理、喷砂清理及抛光试样规范 | (Roughness comparison specimens - Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens) |
| BS 2640-1982 | 输送流体用碳素钢管道工程的二级氧乙炔焊规范 | (Specification for Class II oxy-acetylene welding of carbon steel pipework for carrying fluids) |
| BS 2646-1-1993 | 实验室灭菌用高压釜.设计、制造、安全和性能规范 | (Autoclaves for sterilization in laboratories - Specification for design, construction, safety and performance) |
| BS 2646-2-1990 | 实验室灭菌用高压釜.第2部分:设计与安装指南 | (Autoclaves for sterilization in laboratories - Guide to planning and installation) |
| BS 2646-3-1993 | 实验室灭菌用高压釜.安全使用及操作指南 | (Autoclaves for sterilization in laboratories - Guide to safe use and operation) |
| BS 2646-4-1991 | 实验室灭菌用高压釜.第4部分:维修指南规范 | (Autoclaves for sterilization in laboratories - Guide to maintenance) |
| BS 2646-5-1993 | 实验室灭菌用高压釜.功能和性能的试验方法 | (Autoclaves for sterilization in laboratories - Methods of test for function and performance) |
| BS 2648-1955 | 实验室电热干燥炉的性能要求 | (Performance requirements for electrically-heated laboratory drying ovens) |
| BS 2649-1-1988 | 玻璃的分析方法.第1部分:碱碳-镁-硅石型玻璃 | (Methods for analysis of glass - Glasses of the soda-lime-magnesia-silica type) |
| BS 2649-3-1988 | 玻璃的分析方法.第3部分:氧化钾一氧化铝-硅石类玻璃 | (Methods for analysis of glass - Glasses of the potassium oxide-lead oxide-silica type) |
| BS 2654-1989 | 石油工业用对接焊接壳体的立式钢焊接非冷却贮藏罐的制造规范 | (Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry) |
| BS 2655-5-1970 | 电梯、自动扶梯、自动人行道与链斗式提升机规范.第5部分:链斗式提升机的一般要求 | (Specification for lifts, escalators, passenger conveyors and paternosters - General requirements for paternosters) |
| BS 2655-9-1970 | 电梯、自动扶梯、自动人行道与链斗式提升机规范.第9部分:定义 | (Specification for lifts, escalators, passenger conveyors and paternosters - Definitions) |
| BS 2656-1972 | 电镀用锌阳极、氧化锌和锌盐规范 | (Specification for zinc anodes, zinc oxide and zinc salts for electroplating) |
| BS 2657-1974 | 电镀用氟硼酸和金属氟硼酸盐 | (Specification for fluoroboric acid and metal fluoroborates for electroplating) |
| BS 2690-102-1979 | 工业用水的试验方法.第102部分:联氨:分光光度法(4-二甲氨基苯甲醛) | (Methods of testing water used in industry - Hydrazine: spectrophotometric method (4-dimethylaminobenzaldehyde)) |
| BS 2690-104-1983 | 工业用水的试验方法.第104部分:二氧化硅:活性的、总的和悬浮的 | (Methods of testing water used in industry - Silica: reactive, total and suspended) |
| BS 2690-115-1983 | 工业用水的试验方法.第115部分:环已胺分光光度法 | (Methods of testing water used in industry - Cyclohexylamine: spectrophotometric method) |
| BS 2690-116-1983 | 工业用水的试验方法.第116部分:吗啉:分光光度法 | (Methods of testing water used in industry - Morpholine: spectrophotometric method) |
| BS 2690-117-1983 | 工业用水的试验方法.第117部分:长链脂肪胺:分光光度法 | (Methods of testing water used in industry - Long-chain fatty amines: spectrophotometric method) |
| BS 2690-15-1974 | 工业用水的试验方法.第15部分:游离的乙二胺四醋酸(EDTA)及其总盐、聚丙烯酸酯和聚甲基丙烯酸酯 | (Methods of testing water used in industry - Free EDTA, total salts of EDTA, polyacrylate and polymethacrylate) |
Copyright © 2008 Worldwide Translation.
宽天下翻译公司版权所有.Tel:010-83345348
