编号 | 中文名称 | 英文名称 |
ANSI C12.14-1982 | 电度表用磁带脉冲记录器 | Magnetic tape pulse recorders for electricity meters |
ANSI C12.15-1990 | 机电式电度表计量用固态最大需用瓦时计 | Solid-state demand registers for electromechanical watthour meters |
ANSI C12.16-1991 | 固态电量计 | Solid-state electricity meters |
ANSI C12.17-1991 | 电度表用盒式固态脉冲存储器 | Cartridge-type solid-state pulse recorders for electricity metering |
ANSI C12.20-2003 | 0.2和0.5的精确度等级的电量计 | (Electricity Meters 0.2 and 0.5 Accuracy Classes ) |
ANSI C12.4-1984 | 机械式最大需量记录器 | Mechanical demand registers |
ANSI C12.5-1978 | 耗热表 | Thermal Demand Meters |
ANSI C12.6-1987 | 测量用移相器的标电和端子的布置 | Marking and arrangement of terminals for phase-shifting devices used in metering |
ANSI C12.7-2005 | 电度表插座要求 | |
ANSI C12.8-1981 | 整装A型基座装置的电度表、测试装置和操纵台 | Test blocks and cabinets for installation of self-contained A-base watthour meters |
ANSI C12.9-2005 | 变压器额定仪表用测试开关 | |
ANSI C135.1-1979 | 架空线路用镀锌钢制螺栓和螺母 | Galvanized Steel Bolts and Nuts for Overhead Line Construction |
ANSI C135.3-1987 | 架设电线杆和传输线路用镀锌铁方头螺钉 | Zinc-coated ferrous lag screws for pole and transmission line construction |
ANSI C135.38-1987 | 镀锌铁制带垫圈的螺栓和带垫圈的螺母 | Zinc-coated ferrous washerhead bolts and washer nuts |
ANSI C135.4-1987 | 架空线路架设用镀锌铁制吊环螺母和眼螺栓 | Zinc-coated ferrous eyebolts and nuts for overhead line construction |
ANSI C135.5-1987 | 架空线路架设用镀锌铁制吊环螺母和眼螺栓 | Zinc-coated ferrous eyenuts and eyebolts for overhead line construction |
ANSI C136.1-1991 | 白炽路灯的选择指南 | Roadway ligthing - Filament lamps - Guide for selection |
ANSI C136.1-2004 | 道路照明.白炽灯.选择指南 | |
ANSI C136.12-2004 | 道路照明设备用汞灯的选择指南 | |
ANSI C136.13-2004 | 道路和区域照明设备.木制电杆的金属支架 | |
ANSI C136.14-2004 | 道路和区域照明设备.水平发光高强度放电灯内封闭式侧装椭圆形照明灯 | |
ANSI C136.16-2004 | 道路照明设备中封闭式柱顶安装照明灯具 | |
ANSI C136.2-2004 | 道路照明设备.灯具的电压分级 | |
ANSI C136.21-1987 | 道路照明.与柱顶安装式发光设备共用的垂直榫头照明设备 | Roadway Lighting - Vertical Tenons Used with Post-Top-Mounted Luminaires |
ANSI C136.21-2004 | 道路照明.柱顶安装式照明设备用立式榫头 | |
ANSI C136.22-1988 | 道路照明设备发光体的内标签 | Roadway Lighting Equipment - Internal Labeling of Luminaires |
ANSI C136.22-2004 | 道路照明设备.灯具的内标签 | |
ANSI C136.27-2005 | 铁路和区域照明设备.隧道和地道照明灯具 | |
ANSI C136.3-2005 | 道路照明设备.照明装置附件 | |
ANSI C136.33-2005 | 公路和区域照明设备.高强度放电点火器用插接式插孔和插头 | |
ANSI C136.34-2004 | 道路和区域照明设备.道路和区域照明灯具的装饰保护罩 | |
ANSI C136.4-2003 | 道路照明设备.串行插座和串行插座孔 | (Roadway Lighting Equipment - Series Sockets and Series-Socket Receptacles ) |
ANSI C136.6-2004 | 道路照明设备.路灯的金属头和反光器组件.机械互换性与光学互换性 | |
ANSI C136.9-1990 | 道路照明设备.用于金属头灯座支撑组件.机械互换性 | Roadway Lighting Equipment - Socket Support Assemblies for Metal Heads - Mechanical Interchangeability |
ANSI C136.9-2004 | 道路照明.金属头中使用的灯座支撑组件的机械互换性 | |
ANSI C136.9-2004 | 道路照明.金属头中使用的灯座支撑组件的机械互换性 | (Roadway Lighting - Socket Support Assemblies for Use in Metal Heads, Mechanical Interchangeability ) |
ANSI C18.1M Part 1-2005 | 干电池和电池组.规范 | |
ANSI C18.1M Part 2-2003 | 有水溶电解质的便携式原电池和蓄电池组.安全标准 | (Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard ) |
ANSI C18.2M Part 1-2003 | 便携式可再充电电池和蓄电池组.总则和规范 | (Portable Rechargeable Cells and Batteries- General and Specifications ) |
ANSI C18.3M Part 1-2005 | 便携式锂原电池和电池组.总则和规范 | |
ANSI C18.3M Part 2-2004 | 便携式锂原电池和蓄电池.安全标准 | |
ANSI C18.3M Part 2-2004 | 便携式锂原电池和蓄电池.安全标准 | (Portable Lithium Primary Cells and Batteries - Safety Standard ) |
ANSI C18.3M-1991 | 原电池.锂原电池.规范 | Primary Batteries - Lithium Primary Batteries - Specifications |
ANSI C2-2002 | 国家电气安全规程 | (National Electrical Safety Code ) |
ANSI C29.1-1988 | 电绝缘子.试验法 | Electrical Power Insulators - Test Methods |
ANSI C29.10-1989 | 湿法瓷绝缘子.室内装置型 | Wet-Process Porcelain Insulators - Indoor Apparatus Type |
ANSI C29.11-1989 | 架空输电线用合成悬挂绝缘子.试验 | Composite Suspension Insulators for Overhead Transmission Lines - Tests |
ANSI C29.18-2003 | 绝缘子复合材料.配线柱型 | (Insulators Composite - Distribution Line Post Type ) |
ANSI C29.2-1992 | 湿法工艺瓷绝缘子和钢化玻璃绝缘子(悬式) | Insulators - Wet-process porcelain and toughened glass - Suspension type |
ANSI C29.3-1986 | 湿法瓷绝缘子.柱式 | Wet Process Porcelain Insulators - Spool Type |
ANSI C29.4-1989 | 湿法瓷绝缘子.张紧式 | Wet-Process Porcelain Insulators - Strain Type |
ANSI C29.5-1984 | 湿法瓷绝缘子.低压和中压型 | Wet-Process Porcelain Insulators - Low- and Medium-Voltage Types |
ANSI C29.8-1985 | 湿法瓷绝缘子.帽式和针式装置型 | Wet-Process Porcelain Insulators - Apparatus, Cap and Pin Type |
ANSI C29.9-1983 | 湿法瓷绝缘子.接线柱型装置 | Wet-Process Porcelain Insulators - Apparatus, Post-Type |
ANSI C37.12-1991 | 由对称电流限定的交流高压断路器.规范指南 | AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Specifications Guide |
ANSI C37.121-1989 | 开关设备.变电所.要求 | Switchgear - Unit Substations - Requirements |
ANSI C37.32-2002 | 高压空气间隔开关、中断器开关、出始故障开关、接地开关、总线支持和附件控制的电压范围.优选参量、结构指 | (High-Voltage Air Disconnect Switches Interrupter Switches, Fault Initiating Switches, Grounding Switches, Bus supports and Accessories Control Voltage Ranges - Schedule of Preferred Ratings, Construction Guidelines and Specifications ) |
ANSI C37.33-1987 | 开关设备.高压空气开关.额定控制电压及其范围(附加表1).补充件C37.33A-1990 | Switchgear - High-Voltage Air Switches - Rated Control Voltages and Their Ranges (Addition to Table 1); Supplement C 37.33A - 1990 |
ANSI C37.33a Supplement-1990 | 高压空气开关装置的额定控制电压及其范围(附加至表1)(ANSI C37.33-87的补充件) | Switchgear - High-voltage air switches - Rated control voltages and their ranges; Supplement |
ANSI C37.44-1981 | 配电用油断路器和熔断体 | Distribution Oil Cutouts and Fuse Links |
ANSI C37.45-1981 | 配电用封装式单极空气开关 | Distribution Enclosed Single-Pole Air Switches |
ANSI C37.50-1989 | 开关设备.封装式低压交流电力线路断路器.试验程序 | Switchgear - Low-Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures |
ANSI C37.51-1989 | 开关设备.金属封装低压交流电力线路断路器的开关装置组件.一致性试验程序 | Switchgear - Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures |
ANSI C37.52-1974 | 封闭装低压交流电力线路保护器的试验程序 | Test Procedures for Low-Voltage AC Power Circuit Protectors Used in Enclosures |
ANSI C37.53.1-1989 | 开关设备.高压限流电机起动器熔断器.一致性试验程序 | Switchgear - High-Voltage Current-Limiting Motor-Starter Fuses - Conformance Test Procedures |
ANSI C37.54-2003 | 用作具有金属外壳的开关设备组件中可移动件的室内交流高压线路断路器的合格试验程序 | (Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies ) |
ANSI C37.55-1989 | 开关设备.金属封装开关装置组件.一致性试验程序 | Switchgear - Metal-Clad Switchgear Assemblies - Conformance Test Procedures |
ANSI C37.55-2003 | 中压金属包覆的开关设备附件.合格试验规程 | (Medium Voltage Metal-Clad Switchgear Assemblies -- Conformance Test Procedures ) |
ANSI C37.57-1990 | 开关设备.金属封装断路开关组件.一致性试验 | Switchgear - Metal-Enclosed Interrupter Switchgear Assemblies - Conformance Testing |
ANSI C37.57-2003 | 开关设备.金属封装的断续器开关设备组件.一致性试验 | (Switchgear - Metal-Enclosed Interrupter Switchgear Assemblies - Conformance Testing ) |
ANSI C37.58-1990 | 开关设备.金属封装开关设备用室内交流中压开关.一致性试验程序 | Switchgear - Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear - Conformance Test Procedures |
ANSI C37.58-2003 | 金属封装的开关设备中使用的室内交流中压开关的一致性试验程序 | (Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear ) |
ANSI C37.72-1987 | 交流电系统用人工操作的、正面不带电有负载的断路开关和可分离连接器的开关 | Manually-operated, dead-front padmounted switchgear with load interrupting switches and separable connectors for alternating-current systems |
ANSI C37.85-1989 | 开关设备.交流高压电力真空断路器.X射线辐射极限的安全要求 | Switchgear - Alternating-Current High -Voltage Power Vacuum Interrupters - Safety Requirements for X-Radiation Limits |
ANSI C37.85-2002 | 电源开关设备用交流高压电力真空断路器的X射线辐射限值 | (Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum ) |
ANSI C39.1-1981 | 电气模拟指示装置的要求 | Requirements for Electrical Analog Indicating Instruments |
ANSI C50.10-1990 | 旋转电机.同步电机 | Rotating Electrical Machinery - Synchronous Machines |
ANSI C50.12-1982 | 水轮机用凸极同步发电机和发电机/电动机的要求 | Requirements for Salient-Pole Synchronous Generators and Generator/Motors for Hydraulic Turbine Applications |
ANSI C50.13-1989 | 旋转电机.圆柱形转子同步发电机 | Rotating Electrical Machinery - Cylindrical-Rotor Synchronous Generators |
ANSI C50.14-1977 | 燃气轮机驱动的圆柱形转子同步发电机的要求 | Requirements for combustion gas turbine driven cylindrical rotor synchronous generators |
ANSI C50.15-1989 | 旋转电机.氢冷燃气涡轮驱动圆柱形转子同步发电机.要求 | Rotating Electrical Machinery - Hydrogen-Cooled, Combustion-Gas-Turbine-Driven, Cylindrical-Rotor Synchronous Generators - Requirements |
ANSI C57.12.10-1988 | 变压器.不大于230KV,833/958至8333/10417KVA,单相以及750/862至60000/80000/100000KVA,三相,无负载抽头变换和3750/4687至于60000/80000/100000KVA有负载抽头变换.安全要求 | |
ANSI C57.12.13-1982 | 成套设备包括变电站用充液变压器的一致性要求 | Conformance Requirements for Liquid-Filled Transformers Used in Unit Installations, Including Unit Substations |
ANSI C57.12.25-1990 | 变压器.可拆绝缘高压连接器的安装在基座上的间隔式自冷单相配电变压器.高压不大于34500Y接地/19920伏,低压240/120伏,容量不大于167千伏安.要求 | |
ANSI C57.12.27-1982 | 安装在基座上的设备包括成套变电所在内的用充液配电变压器的一致性要求 | Conformance Requirements for Liquid-Filled Distribution Transformers Used in Pad-Mounted Installations, Including Unit Substations |
ANSI C57.12.50-1981 | 高压601至34500伏,低压120至600伏,容量单相1至500千伏安和三相15至500千伏安,通风干式配电变压器的要求 | Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts, Requirements for; Correction June 1982 |
ANSI C57.12.51-1981 | 高压601至34500伏,低压208Y/120至4160伏三相容量不小于501千伏安,通风干式电力变压器的要求 | Requirements for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts |
ANSI C57.12.52-1981 | 高压:601至34500伏.低压:208Y/120至4160伏,三相容量不小于501千伏安,密封干式电力变压器的要求 | Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts |
ANSI C57.12.55-1987 | 变压器.包括成套变电所在内的成套设备用干式变压器.一致性标准 | Transformers - Dry-Type Transformers Used in Unit Installations, Including Unit Substations - Conformance Standard |
ANSI C57.12.70-1978 | 配电和电力变压器用终端标志和连接法 | Terminal Markings and Connections for Distribution and Power Transformers |
ANSI C63.12-1987 | 电磁兼容性限值推荐标准 | Electromagnetic compatibility limits - Recommended practice |
ANSI C63.14-1992 | 电磁兼容性(EMC),电磁脉冲(EMP)和静电放电(ESD)的技术词典 | Dictionary for technologies of electromagnetic campatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD) |
ANSI C63.4-1992 | 低压电气和电子仪器发生的9千赫兹至40千兆赫兹范围的无线电噪声的测量方法 | Methods of measurement of radio-noise - Emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz |
ANSI C63.5-1988 | 在电磁干扰(EMI)控制中校准天线以测量辐射的电磁兼容性 | Electromagnetic compatibility - Radiated emission measurements in electromagnetic interference (EMI) control - Calibration of antennas |
ANSI C63.7-1992 | 进行辐射测量的开放区试验点构造指南 | Guide for construction of open-area test sites for performing radiated emission measurements |
ANSI C78.1-1991 | 荧光灯.快速启动型.尺寸和电气特性 | Fluorescent Lamps - Rapid-Start Types - Dimensional and Electrical Characteristics |
ANSI C78.1340-1990 | 电灯.450瓦230伏B75自镇流汞灯 | Electric Lamps - 450-Watt, 230-Volt, B75 Self-Ballasted Mercury Lamps |
ANSI C78.1341-1990 | 电灯.750瓦120伏自镇流汞灯 | Electric Lamps - 750-Watt, 120-Volt Self-Ballasted Mercury Lamps |
ANSI C78.1342-1990 | 电灯.160瓦120伏B87自镇流汞灯 | Electric Lamps - 160-Watt 120-Volt B87 Self-Ballasted Mercury Lamps |
ANSI C78.1380-1988 | 电灯.250瓦,120伏.自镇流水银灯.规范 | Electric Lamps - 250-Watt, 120-Volt Self-Ballasted Mercury Lamps - Specifications |
ANSI C78.1381-1989 | 电灯.70瓦M85金属卤素灯 | Electric Lamps - 70-Watt M85 Metal-Halide Lamps |
ANSI C78.1401-1975 | 放映灯规格.双触点中环灯头向上型 | Dimensions for Projection Lamps - Double-Contact, Medium Ring, Base-Up Type |
ANSI C78.1401-2004 | 双触点、中等环、灯头向上型投影灯的规格 | |
ANSI C78.1402-1975 | 放映灯规格.四脚预聚焦灯头向下型 | Dimensions for Projection Lamps - Four-Pin, Prefocus, Base-Down Type |
ANSI C78.1402-2004 | 四脚、预聚焦、灯头向下型放映灯的规格 | |
ANSI C78.1404-1991 | 电灯.DNF放映灯 | Electric Lamps - DNF Projection Lamp |
ANSI C78.1406-1983 | 电灯.灯头向下单触点中聚焦投影灯.规格 | Electric Lamps - Single-Contact Medium Prefocus Base-Down-Type Projection Lamps - Dimensions |
ANSI C78.1406-2004 | 灯头向下型单触点、中聚焦放映灯的规格 | |
ANSI C78.1407-1985 | 电灯.聚光灯.四脚聚焦投影灯反射器.规格 | Electric Lamps - Condenser-Reflector, Four-Pin, Prefocus-Base Projection Lamps - Dimensions |
ANSI C78.1407-2004 | 四脚、预聚焦型聚光反射器的放映灯的规格 | |
ANSI C78.1408-1991 | 电灯.EJL放映灯 | Electric Lamps - CBA Projection Lamp |
ANSI C78.1408-2004 | 电灯.CBA放映灯 | |
ANSI C78.1409-1991 | 电灯.EJL放映灯 | Electric Lamps - EJL Projection Lamp |
ANSI C78.1410-1991 | 电灯.ELB放映灯 | Electric Lamps - ELB Projection Lamp |
ANSI C78.1411-1991 | 电灯.ELC放映灯 | Electric Lamps - ELC Projection Lamp |
ANSI C78.1414-1988 | 电灯.DDM投影灯 | Electric Lamps - DDM Projection Lamp |
ANSI C78.1415-1989 | 电灯.DED放映灯 | Electric Lamps - DED Projection Lamp |
ANSI C78.1416-1991 | 电灯.FHS投影灯 | Electric Lamps - FHS Projection Lamps |
ANSI C78.1421-2002 | 投射灯尺寸和中心定位系统.GZ4基的35mm整体反射轮辋标准灯 | (Dimensions and Centering Systems for Projection Lamps - 35mm Integral Reflector Rim Reference Lamps with GZ4 Bases ) |
ANSI C78.1422-1991 | 电灯.ENG投影灯 | Electric Lamps - ENG Projection Lamp |