| 编号 |
中文名称 |
英文名称 |
| NF A06-392-2-2003
|
黑色金属的化学分析.钢铁中的氧含量测定.第2部分:在惰性气体中融化后的红外法
|
(Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2 : infrared method after fusion under inert gas.)
|
| NF A09-490-1988
|
无损检验.密封检验.气体密封规范和检验用推荐方法
|
(NON DESTRUCTIVE TESTING. TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR THE SPECIFICATION AND TESTING OF GAS-TIGHTNESS.)
|
| NF A09-492-2001
|
无损检验.渗漏试验.痕量气体方法
|
(Non-destructive testing - Leak testing - Tracer gas method.)
|
| NF A35-056-1984
|
钢铁产品.气体保护电弧焊和潜弧焊的焊条用合金钢和非合金钢线材.等级和型号
|
(Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.)
|
| NF A36-211-1997
|
焊接气体气缸用薄钢板和条带
|
(Steel sheet and strip for welded gas cylinders.)
|
| NF A51-120-1996
|
铜和铜合金.无缝的.应用于环境卫生和加热的水和气体的圆形铜管( 欧洲标准EN1057)
|
(Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.)
|
| NF A51-127-2001
|
铜和铜合金.医用气体或真空用的无缝圆铜管
|
(Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.)
|
| NF A72-120-1973
|
钢铁厂.气体管道和大直径阀.带法兰的接头（PN6）
|
(LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.)
|
| NF A81-010-1994
|
焊条.气体保护电弧焊和切割用气体
|
(Welding consumables. Shielding gases for arc welding and cutting.)
|
| NF A81-011-1991
|
编号.用于惰性气体弧焊的钨电报和等离子切割
|
(Tungsten electrodes for inert gas shielded arc welding, and for plasma cutting and welding. Codification.)
|
| NF A81-311-1994
|
碳钢、碳锰钢和微合金钢的气体金属电弧焊丝状电极和电积物的分类
|
(Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification.)
|
| NF A81-325-1997
|
焊条.非合金钢和细晶粒钢制惰性气体保护钨焊接用棒材,线材和镀层
|
(WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).)
|
| NF A81-350-1997
|
焊条.非合金钢及细粒钢的有和无气体保护的金属电弧焊接用管状焊丝.分类(欧洲标准EN 758)
|
(Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine grain steels. Classification.)
|
| NF A81-352-2000
|
焊条.高强度钢的气体保护电弧焊用管状有心电焊条.分类
|
(Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification.)
|
| NF A84-090-1992
|
气焊和相关工艺用设备的气体密封
|
(GAS TIGHTNESS OF EQUIPMENT FOR GAS WELDING AND ALLIED PROCESS. (EUROPEAN STANDARD EN 29090).)
|
| NF A87-011-1994
|
带有电焊条的金属电弧熔焊、气体保护金属弧焊及气焊.钢接头的制备
|
(Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel.)
|
| NF A87-013-3-2001
|
焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊
|
(Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.)
|
| NF A88-200-1-2002
|
焊接和相关过程中的健康和安全.电弧焊接产生的烟尘和气体取样的实验室方法.第1部分:排放率测定和颗粒烟尘的
|
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1 : determination of emission rate and sampling for analysis of partic)
|
| NF A88-200-2-2003
|
焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率测
|
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2 : determination of emission rates of gases, except ozone.)
|
| NF A88-200-3-2003
|
焊接和相关工艺中的卫生和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第3部分:用固定点测量法测定臭氧
|
(Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3 : determination of ozone concentration using fixed point measurement)
|
| NF A88-202-1-2001
|
焊接和有关工艺中的健康和安全.工作人员呼吸区空气粒子和气体的取样.第1部分:气体粒子的取样
|
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1 : sampling of airborne particles.)
|
| NF A88-202-2-2000
|
焊接和有关工艺中的健康和安全.工作人员工作区空气粒子和气体的取样.第2部分:气体取样
|
(Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2 : sampling of gases.)
|
| NF A89-701-3-2003
|
CO2激光切割、焊接机的验收试验.第3部分:气体流量和压力测量仪的校准
|
(Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.)
|
| NF B42-003-1994
|
高技术陶瓷.陶瓷粉末的试验方法.第3部分:非氧化物氧含量的气体热萃取法测定
|
(ADVANCED TECHNICAL CERAMICS. METHODS OF TEST FOR CERAMIC POWDERS. PART 3 : DETERMINATION OF THE OXYGEN CONTENT OF NON-OXYDES BY THERMAL EXTRACTION WITH A CARRIER GAS. (EUROPEAN STANDARD EN 725-3).)
|
| NF B51-272-2-1995
|
木质人造板.甲醛释放量的测定.气体分析法测量甲醛释放量
|
(WOOD-BASED PANELS. DETERMINATION OF FORMALDEHYDE RELEASE. PART 2 : FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD. (EUROPEAN STANDARD EN 717-2).)
|
| NF B54-173-1995
|
胶合板.气体分析法测定粘度的方法
|
(PLYWOOD. FORLAMDEHYDE RELEASE CLASSES DETERMINED BY THE GAS ANALYSIS METHOD. (EUROPEAN STANDARD EN 1084).)
|
| NF C01-212-1990
|
电工词汇.第212章:绝缘固体、液体和气体
|
(Electrotechnical vocabulary. Chapter 212 : insulating solids, liquids and gases.)
|
| NF C20-760-1996
|
环境试验.第2部分:试验.试验Ke:流动混合气体的腐蚀试验
|
(Environmental testing. Part 2 : tests. Test Ke : flowing mixed gas corrosion test.)
|
| NF C23-521-2000
|
潜在爆炸性气体环境用电器.“n“型防护装置
|
(Electrical apparatus for potentially explosive atmospheres - Type of protection “n“.)
|
| NF C23-544-2000
|
家用易燃气体监测用电器设备.选择、安装、使用和维修指南
|
(Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance.)
|
| NF C23-554-1992
|
可燃性气体的检测和测量电器仪表.一般要求和试验方法
|
(Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods.)
|
| NF C23-554/A1-1998
|
探测用电器和测量可燃气体.一般要求和检验方法.NF EN 50 054-1992的修改件1
|
()
|
| NF C23-555-1992
|
可燃性气体的检测和测量电气仪表.测量空气中沼气含量不超过5%的I组电气仪表的性能要求
|
(Electical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 5 per cent (V/V) methane in air.)
|
| NF C23-556-1992
|
可燃性气体检测和测量电气仪表.测量空气中沼气含量为100%及其以下的I组电气仪表的性能要求
|
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group I apparatus indicating up to 100 per cent (V/V) methane in air.)
|
| NF C23-557-1992
|
可燃性气体的检测和测量电气仪表.测量低于爆炸极限100%以下的Ⅱ组电气仪表的性能要求
|
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent lower explosive limit.)
|
| NF C23-558-1992
|
可燃性气体检测和测量电气仪表.测量瓦斯为100%及其以下的Ⅱ组电气仪表的性能要求
|
(Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for group II apparatus indicating up to 100 per cent (V/V) gas.)
|
| NF C23-570-2000
|
电磁兼容性.可燃气体、有毒气体或氧气的检测和测量用电气设备
|
(Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.)
|
| NF C23-571-2002
|
检测和测量可燃气体、有毒气体和氧气的电气设备.使用软件和/或数字技术的设备的要求和试验
|
(Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.)
|
| NF C23-579-10-2003
|
爆炸性气体环境用电气设备.第10部分:危险场所的分类
|
(Electrical apparatus for explosive gas atmospheres - Part 10 : classification of hazardous areas.)
|
| NF C23-579-14-1999
|
爆炸气体环境用电气设备.第14部分:危险区(矿井除外)的电气设备
|
(Electrical apparatus for explosive gas atmospheres. Part 14 : electrical installations in hazardous areas (other than mines).)
|
| NF C23-579-17-2003
|
爆炸性气体环境用电气设备.第17部分:危险场所(矿井除外)电气设备的检验和维护
|
(Electrical apparatus for explosive gas atmospheres - Part 17 : inspection and maintenance of electrical installations in hazardous areas (other than mines).)
|
| NF C23-594-2000
|
家用易燃气体监测用电气设备.试验方法和性能要求
|
(Electrical apparatus for the detection of combustibe gases in domestic premises - Test methods and performance requirements.)
|
| NF C27-224-1992
|
浸油电设备气体和油的抽样指南和游离及溶解气体的分析指南
|
(Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases.)
|
| NF C27-230-1986
|
电工技术用流体.在电压和电离作用下，液化绝缘气体
|
(Fluids for electrotechnical applications. Gassing of insulating liquids under electrical stress and ionization.)
|
| NF C27-239-1999
|
使用中的浸矿物油的电气设备.溶解和游离气体分析说明指南
|
(Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis.)
|
| NF C27-240-1993
|
浸渍绝缘材料.关于电气设备制造试验的溶解气体的分析应用(欧洲标准 EN 61 181)
|
(Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.)
|
| NF C32-074-1993
|
电缆材料燃烧过程中的气体试验.通过测定PH及导电性测定气体的腐蚀程度
|
(TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.)
|
| NF C32-074-21-2000
|
失火情况下电缆的一般试验方法.电缆材料燃烧时产生的气体的试验.第2-1部分:程序.氢卤酸气体量的确定
|
(Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables - Part 2-1 : procedures - Determination of the amount of halogen acid gas.)
|
| NF C32-102-13/A1-2000
|
额定电压达到和包括450/750V的橡胶绝缘电缆.第13部分:用交叉链接聚合物屏蔽和绝缘的及有低烟雾和腐蚀性气体
|
(Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13 : single and multicore flexible cables, isulated and sheathed with crosslinked polymer and having low emission of smok)
|
| NF C32-102-9-1999
|
额定电压不大于450/750V的橡胶绝缘电缆.第9部分:烟和腐蚀性气体低发散率的固定布线用单芯非铠装电缆
|
(RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 9 : SINGLE CORE NON-SHEATHED CABLES FOR FIXED WIRING HAVING LOW EMISSION OF SMOKE AND CORROSIVE GASES.)
|
| NF C32-500/A1-2003
|
无载额定输出电压大于1kV不超过10kV的信号和气体放电管装置用电缆
|
(Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV.)
|
| NF C42-726-1997
|
测量、控制和实验室用电气设备的安全要求.第2-043部分:使用热空气或热惰性气体的实验室处理和医疗材料处理
|
(Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-043 : particular requirements for dry heat sterilizers using either hot air or inert gas for the treatment of medical materials, and for laboratory processes)
|
| NF C46-251-1994
|
气体分析仪性能表示.第1部分:通则
|
(Expression of performance of gas analyzers. Part 1 : general.)
|
| NF C46-252-1994
|
气体分析器性能表示.第2部分:氧气(高温电化学感应器)(EN 61 207-2)
|
(Expression of performance of gas analyzers. Part 2 : oxygen in gas (utilizing high-temperature electrochemical sensors).)
|
| NF C46-253-2002
|
气体分析仪性能表示.第3部分:顺磁氧分析仪
|
(Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.)
|
| NF C46-256-1994
|
气体分析器性能表示.第6部分:光度计分析器(EN 61 207-6)
|
(Expression of performance of gas analysers. Part 6 : photometric analyzers.)
|
| NF C52-108-1969
|
变压器.带两个触头的测定放出气体的防护装置.特性及制造规则
|
(TRANSFORMERS TWO-CONTACT GAS-ACTUATED PROTECTIVE DEVICES. CHARACTERISTICS AND CONSTRUCTIONAL REQUIREMENTS.)
|
| NF C52-109-1969
|
变压器.带一个触头的测定放出气体的防护装置.特性和制造规则
|
(TRANSFORMERS. GAS-ACTUATED PROTECTIVE DEVICES. CHARACTERISTICS AND CONSTRUCTIONAL REQUIREMENTS.)
|
| NF C52-216-2-2002
|
变压器和反应堆配件.第2部分:带保油箱的液体浸渍变压器和反应堆用气体和油启动的继电器
|
(Power transformer and reactor fittings - Part 2 : gas and oil actuated relay for liquid immersed transformers and reactors with conservator.)
|
| NF C61-743-1-2002
|
低压电涌保护装置元件.第311部分:气体放电管规范
|
(Components for low-voltage surge protective devices - Part 311 : specification for gas discharge tubes (GDT).)
|
| NF C64-410-1996
|
额定电压72.5Kv及以上的气体绝缘的铁壳式开关设备
|
(Gaz-insulated metal-enclosed switchgear for rated voltages of 72,5 kv and above.)
|
| NF C64-410/A11-2001
|
额定电压72.5kV及以上的气体绝缘的金属封闭式开关装置
|
(Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above.)
|
| NF C64-4511-1993
|
置于气体压力下的高压装置用铝和铝合金煅制外壳.(欧洲标准 EN 50064).补充件1
|
()
|
| NF C64-455-1993
|
金属封闭气体填充的高压开关和控制设备的铸造树脂分隔部分(欧洲标准EN 50089)
|
(Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear.)
|
| NF C73-854/A1-2002
|
家用和类似用途的电器安全.第2部分:使用液体或气体的家用表面清洗设备的特殊要求
|
(Safety of household and similar electrical appliances - Part 2 : particular requirements for surface-cleaning appliances for household use employing liquids or steam.)
|
| NF C93-400-11-14-1997
|
电子设备用机电元件.基本试验过程和测量方法.第11部分:气候试验.第14节:试验11p:单一流动气体腐蚀试验
|
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 14 : test 11p : flowing single gas corrosion test.)
|
| NF C93-400-11-7-1997
|
电子设备用机电元件.基本试验过程和测量方法.第11部分:气候试验.第7节:试验11g:混合流动气体腐蚀试验
|
(Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 11 : climatic tests. Section 7 : test 11g : flowing mixed gas corrosion test.)
|
| NF C93-471-14-1997
|
电子设备用机电元件.基本试验规程和测量方法.气候试验.试验11p.流动的单种气体腐蚀试验.(欧洲标准 EN 60 51
|
(ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 14 : TEST 11P. FLOWING SINGLE GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-14).)
|
| NF C93-471-7-1997
|
电子设备的电机元件.基本试验过程和测量方法.第11部分:气候试验.第7节:试验11G:流动混合气体腐蚀试验
|
(ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 11 : CLIMATIC TESTS. SECTION 7 : TEST 11G : FLOWING MIXED GAS CORROSION TEST. (EUROPEAN STANDARD EN 60 512-11-7).)
|
| NF C93-902-28-1998
|
纤维光学连接装置和无源元件.基本试验和测量程序.第2-28部分:试验.工业气体(二氧化硫)(欧洲标准EN 61 300-2
|
(Fibres optic interconnecting devices and passive components. Basic test and measurements procedures. Part 2-28 : tests. Industrial atmosphere (sulphur dioxide).)
|
| NF C96-022-7-2002
|
半导体器件.机械和气候试验方法.第7部分:其他残余气体的分析和内部水分含量的测量
|
(Semiconductor devices - Mechanical and climatic test methods - Part 7 : internal moisture content measurement and the analysis of other residual gases.)
|
| NF D30-003-1992
|
取暖设备.气体.液体燃料、气体燃料.两用热水 集中采暖锅炉.按热规程所必须的热水供应系统参数的测定
|
(HEATING. GAS. LIQUID FUELS,GASEOUS FUEL. DOUBLE HOT WATER CENTRAL HEATING BOILERS. DETERMINATION OF HOT WATER PRODUCTION SYSTEM PARAMETERS NECESSARY FOR APPLICATION OF THE HEAT RULES.)
|
| NF D30-500-2003
|
试验气体.试验压力.仪器种类
|
(Test gases - Test pressures - Appliance categories.)
|
| NF D30-500/A1-1997
|
试验气体.试验压力.仪器种类.修改件1
|
(Test gases - Test pressures - Appliances categories.)
|
| NF D35-001-1965
|
根据加热容量对各供热单位(气体、液体、固体燃料)的选择
|
(CHOICE OF AN INDIVIDUAL HEATING UNIT (SOLID,LIQUID AND GASEOUS FUELS) ACCORDING TO THE VOLUME TO BE HEATED.)
|
| NF D35-322-1997
|
配有气体燃烧器的卫生设备用气体燃烧连续热水器(欧洲标准EN 26)
|
(Gas-fired instantaneous water heaters for sanitory uses production, fitted with atmospheric burners.)
|
| NF D35-330-1994
|
燃气集中加热锅炉.输入热量不超过70kW的B11和B11BIS型带气体燃烧器的锅炉
|
(Gaz-fired central heating boilers. Type B11 and B11BIS boilers fitted with atmospheric burners of nominal heat imput not exceeding 70 kw.)
|
| NF D35-334-1985
|
固体或液体燃料转换成气体的集中供热设备.大气式燃烧器
|
(Equipment for the conversion to gas of central heating boilers built for solid and liquid fuels. Atmospheric burners.)
|
| NF D35-337-2001
|
加热.气体.液体燃料和固体燃料.与排放燃烧产物的机械装置相连的热输出不超过70kW的燃气式集中加热锅炉
|
(Heating - Gas - Liquid fuel, solid fuel - Gas-fired central heating boilers of heat output not exceeding 70 kW designed to be connected to a mechanical installation for the evacuation of the combustio)
|
| NF D35-339-1980
|
气体燃料功率在70kW以下的常压组合锅炉和锅炉群
|
(GAS FIRED MULTI-FURNACE BOILERS AND GROUPS OF BOILERS WITH ATMOSPHERIC BURNERS,WITH A TOTAL RATED HEAT OUTPUT EQUAL TO OR LESS THAN 70 KW.)
|
| NF D35-345/A2-2002
|
气体点火的中央加热锅炉.标称热量输入不超过70KW的C型锅炉
|
(Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW.)
|
| NF D36-103-2001
|
家政学.使用管道气体燃料的家用器具外部连接用(增强)橡胶软管
|
(Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using gaseous fuels by networks.)
|
| NF D36-106-1-1997
|
和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第1部分:厌氧密封材料
|
(SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 1 : ANAEROBIE JOINTING COMPOUNDS. (EUROPEAN STANDARD EN 751-1).)
|
| NF D36-106-2-1997
|
和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第2部分:非时效硬化的密封材料
|
(SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 2 : NON-HARDENING JOINTING COMPOUNDS. (EUROPEAN STANDARD EN 751-2).)
|
| NF D36-106-3-1997
|
和第1,第2及第3族气体以及热水接触的金属螺纹连接用密封材料.第3部分:非烧结的PTFE带材
|
(SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1 ST, 2ND AND 3RD FAMILY GASES AND HOT WATER. PART 3 : UNSINTERED PTFE TAPES. (EUROPEAN STANDARD EN 751-3).)
|
| NF D36-306-2002
|
气体燃烧器和气体器具的自动关闭阀
|
(Automatic shut-off valves for gas burners and gas appliances.)
|
| NF D36-351-1969
|
家政学.使用气体燃料的灶具和洗衣机用的锥形转动阀门
|
(TAPER TURNING COCKS FOR DOMESTIC COOKERS AND WASHING MACHINES USING GASEOUS FUELS.)
|
| NF D36-361-1998
|
气体燃烧器和燃气设施用零点调节器
|
(Zero governors for gas burners and gas burning appliances.)
|
| NF D36-391-1-1998
|
气体燃炉和燃气装置的燃气/空气比率的控制.第1部分:风动型.(欧洲标准EN 12067-1)
|
(Gas/air ratio controls for gas burners and gas burning appliances. Part 1 : pneumatic types.)
|
| NF D36-392-2001
|
气体燃烧器和燃气器具的安全和控制设备.一般要求
|
(Safety and control devices for gas burners and gas-burning appliances - General requirements.)
|
| NF E09-090-1-1997
|
可引起爆炸的气体.防爆.第1部分:基本原理和方法
|
(EXPLOSIVE ATMOSPHERES. EXPLOSION PREVENTION AND PROTECTION. PART 1 : BASIC CONCEPTS AND METHODOLOGY. (EUROPEAN STANDARD EN 1127-1).)
|
| NF E17-301-1999
|
气体表.双绘图气体表(EN 1359)
|
(GAS METERS. DIAPHRAGM GAS METERS. (EUROPEAN STANDARD EN 1359).)
|
| NF E17-304-2002
|
燃气表.气体容量电子转换装置
|
(Gas meters - Gas-volume electronic conversion devices.)
|
| NF E29-139-1998
|
建筑物气体装置用手工操作球阀和死底锥形旋塞
|
(Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings.)
|
| NF E29-171/A1-2001
|
入口压力100巴以下的气体压力调节器
|
(Gas pressure regulators for inlet pressures up to 100 bar.)
|
| NF E29-175-2003
|
气体压力调节站和装置用安全设备.用于入口压力最高达100bar的气体安全关闭装置
|
(Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar.)
|
| NF E29-551-1939
|
钢制气体螺距的连接管.双接头
|
(STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.)
|
| NF E29-552-1936
|
钢制气体螺距的连接管.套筒和连接螺帽
|
(STEEL CONNECTIONS WITH GAS THREAD. SOCKET AND JOINT NUT.)
|
| NF E29-553-1936
|
钢制气体螺距的连接管.T形管
|
(STEEL CONNECTIONS WITH GAS THREAD. TEES.)
|
| NF E29-554-1936
|
钢制气体螺距的连接管.全图
|
(STEEL CONNECTIONS WITH GAS THREAD. OVERALL VIEW.)
|
| NF E29-645-1-1999
|
可运输储气瓶.气体和气体混合物.第1部分:纯气体的特性
|
(Transportable gas cylinders. Gases and gas mixtures. Part 1 : properties of pure gases.)
|
| NF E29-645-2-1997
|
可运输的煤气瓶.气体和气体混合物.第2部分:气体和气体混合物的潜在易燃性和氧化能力的测定
|
(Transportable gas cylinders. Gases and gas mixtures. Part 2 : determination of flammability and oxidizing ability of gases and gas mixtures.)
|
| NF E29-648-2-2001
|
可移动式液化气钢瓶.内有气体的钢瓶和阀材料的配合性.第2部分:非金属材料
|
(Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.)
|
| NF E29-693-1-2001
|
气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第1部分:轭型连接
|
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1 : Yoke type connections.)
|
| NF E29-693-2-2001
|
气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第2部分:螺纹连接
|
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2 : threaded connections.)
|
| NF E29-693-3-2001
|
气体钢瓶.压缩呼吸空气的气体钢瓶的出口连接.第3部分:230巴阀门适配器
|
(Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3 : adaptor for 230 bar valves.)
|
| NF E29-774-1998
|
可运输的储气瓶(LPG除外).气体改换过程
|
(TRANSPORTABLE GAS CYLINDERS (EXCLUDING LPG). PROCEDURES FOR CHANGE OF GAS SERVICE. (EUROPEAN STANDARD EN 1795).)
|
| NF E29-775-1999
|
可移动气体钢瓶.乙炔钢瓶.基本要求和定义(欧洲标准EN 1800)
|
(TRANSPORTABLE GAS CYLINDERS. ACETYLENE CYLINDERS. BASIC REQUIREMENTS AND DEFINITIONS. (EUROPEAN STANDARD EN 1800).)
|
| NF E29-780-2002
|
可运输储气瓶.永久气体和液化气(乙炔除外)用蓄电池驱动车辆.灌装时的检验
|
(Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.)
|
| NF E29-792-2002
|
可移动储气瓶.恒定气体和液化气体(不包括乙炔)用钢瓶组.灌装时间的检查
|
(Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.)
|
| NF E31-001-1969
|
固体，液体和气体燃料锅炉
|
(BOILERS OPERATING WITH SOLID,LIQUID OR GASEOUS FUELS.)
|
| NF E31-402-1/A2-2002
|
非家用单个气体燃烧器架空辐射管式加热器.第1部分:安全性
|
(Single burner gas-fired overhead radiant-tube heaters for non-domestic use - Part 1 : safety.)
|
| NF E31-404-1/A2-2002
|
非家用多个气体燃烧器架空辐射管式加热器系统.第1部分:系统D.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.)
|
| NF E31-404-1/A3-2002
|
非家用的多个气体燃烧器架空辐射管式加热器系统.第1部分:系统D.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1 : system D, safety.)
|
| NF E31-404-2/A2-2002
|
非家用多个气体燃烧器架空辐射管式加热器系统.第2部分:系统E.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.)
|
| NF E31-404-2/A3-2002
|
非家用的多个气体燃烧器架空辐射管式加热器系统.第2部分:系统E.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2 : system E, safety.)
|
| NF E31-404-3/A2-2002
|
非家用多个气体燃烧器架空辐射管式加热器系统.第3部分:系统F.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3 : system F, safety.)
|
| NF E31-404-3/A3-2002
|
非家用的多个气体燃烧器架空辐射管式加热器系统.第3部分:系统F.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3 : system F, safety.)
|
| NF E31-404-4/A2-2002
|
非家用多个气体燃烧器架空辐射管式加热器系统.第4部分:系统H.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4 : system H, safety.)
|
| NF E31-404-4/A3-2002
|
非家用的多个气体燃烧器架空辐射管式加热器系统.第4部分:系统H.安全性
|
(Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4 : system H, safety.)
|
| NF E32-020-5-1991
|
蒸汽发生器.蒸汽锅炉或过热蒸汽锅炉使用的安全.第5部分:工业气体燃烧设备的特殊规定
|
(INSDUSTRIAL HEATING EQUIPMENTS. SAFETY OF STEAM OR SUPERHEATED STEAM GENERATORS,PERMANENTLY MANNED OR NOT. PART 5 : SPECIFIC REQUIREMENTS FOR NON-PULVERIZED COAL-FUELLED INSTALLATIONS.)
|
| NF E32-115-7-2002
|
火管锅炉.第7部分:锅炉的液体和气体燃料的点火系统要求
|
(Shell boilers - Part 7 : requirements for firing systems for liquid and gaseous fuels for the boilers.)
|
| NF E32-200-3-1997
|
工业热处理设备.第3部分:环境气体的产生和使用安全要求(欧洲标准EN 746-3)
|
(INDUSTRIAL THERMOPROCESSING EQUIPMENT. PART 3 : SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES. (EUROPEAN STANDARD EN 746-3).)
|
| NF E37-102-1-2000
|
往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第1部分:用在可燃气体和蒸气环境的II
|
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1 : group II engines for use in flammable gas)
|
| NF E37-102-2-2000
|
往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第2部分:用在地下工作时对沼气和/或
|
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2 : group I engines for use in underground wo)
|
| NF E37-102-3-2000
|
往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第3部分:用在可燃灰尘环境下的II组发
|
(Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3 : group II engines for use in flammable dus)
|
| NF E37-211-1-1997
|
往复式内燃机.废气排放测量.第1部分:气体和颗粒废气排放的试验床测定
|
(Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.)
|
| NF E37-211-2-1996
|
往复式内燃机.排气污染测定.第2部分:气体和颗粒物质排放污染的现场测量
|
(Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.)
|
| NF E37-501-9-2000
|
气体涡轮.征购.第9部分:可信性,可用性,可维修性和安全性
|
(Gas turbines - Procurement - Part 9 : reliability, availability, maintainability and safety.)
|
| NF E51-231-2002
|
石油和天然气工业.旋转型容积式压缩机.第2部分:封装气体压缩机(无油)
|
(Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2 : packaged air compressors (oil-free).)
|
| NF E51-233-2003
|
石油、化学和气体工业.离心压缩机
|
(Petroleum, chemical and gas service industries - Centrifugal compressors.)
|
| NF E51-234-2003
|
石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机
|
(Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors.)
|
| NF E51-235-2003
|
石油和天然气工业.包装的往复式气体压缩机
|
(Petroleum and natural gas industries - Packaged reciprocating gas compressors.)
|
| NF E51-718-1998
|
建筑物通风.气体终端设备.调节器和阀门的动力学试验
|
(Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves.)
|
| NF E86-020-1974
|
气体压力设备.带标号的调整标记板
|
(GAS PRESSURE VESSELS.NAME PLATE FOR STATUTORY IDENTIFICATION MARKINGS.)
|
| NF E86-505-2001
|
低温容器.气体/材料可混用性
|
(Cryogenic vessels - Gas/material compatibility.)
|
| NF F19-352-1996
|
铁路车辆.内部气体容器涂料
|
(RAILWAY ROLLING STOCK. INSIDE AIR TANK PAINT.)
|
| NF F36-002-1974
|
铁路运输设备.工业货车.50MM气体导径管接头
|
(RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.)
|
| NF F37-012-1989
|
液体或低压溶解气体运输用油罐车. 识别和装载牌
|
(TANK WAGONS FOR THE CARRIAGE OF LIQUEFIED OR UNDER PRESSURE DISSOLVED GASES. IDENTITY AND LOADING PLATE.)
|
| NF H31-411-2001
|
包装.薄金属包装.根据公称装填容量限定的有或无附加气体的饮料用顶开口圆形罐头
|
(Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes.)
|
| NF H35-078-1977
|
制瓶工业.玻璃瓶.气体饮料用瓶.强度要求
|
(BOTTLING INDUSTRY. GLASS BOTTLES. CONTAINERS FOR CARBONATED BEVERAGES. STRENGTH REQUIREMENTS.)
|
| NF H96-334-2000
|
工业卡车的安全.潜在爆炸环境中的操作.用于可燃气体,蒸汽潮气和灰尘
|
(Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust.)
|
| NF J95-022-1993
|
游艇.电气装置.对周围可燃气体引燃防护
|
(Small craft. Electrical devices. Protection against ignition of surrounding flammable gases.)
|
| NF J95-022/A1-2001
|
小艇.电气装置.周围可燃气体点火的防护
|
(Small craft - Electrical devices - Protection against ignition of surrounding flammable gases.)
|
| NF L54-002-038-1998
|
航空航天系列.电气及光学连接的元件.试验方法.第319部分:非焊包裹连接的气体致密度
|
(Aerospace series. Elements of electrical and optical connection. Test methods. Part 319 : gastightness of solderless wrapped connections.)
|
| NF M07-083-1995
|
液体燃料.在中级馏出物中甲醇乙醚芸苔子油的鉴定.液体和气体色谱法.
|
(LIQUID FUELS. IDENTIFICXATION OF COLZA METHYL ESTER INMIDDLE DISTILLATE. METHOD BY LIQUID AND GAS CHROMATOGRAPHY.)
|
| NF M07-094-1998
|
液体石油产品.汽油中苯、甲苯和甲基叔丁基醚的测定.毛细管气体色谱法
|
(LIQUID PETROLEUM PRODUCTS. DETERMINATION OF BENZENE, TOLUENE AND METHYLTERT-BUTYLETHER IN PETROL. METHOD BY CAPILLARY GAS CHROMATOGRAPHY.)
|
| NF M08-018-1996
|
石油液体和气体.动态测量的正确可靠性.电脉冲数据和/或电子脉冲数据的电缆传输
|
(Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled transmission of electric and/or electronic pulsed data.)
|
| NF M08-023-1999
|
石油液体和液化石油气体.测量.标准参比条件
|
(PETROLEUM LIQUIDS AND LIQUEFIED PETROLEUM GASES. MEASUREMENT. STANDARD REFERENCE CONDITIONS.)
|
| NF M50-015-2000
|
燃气供应系统.运输气体的管线的气体压力调节安装.功能要求
|
(Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements.)
|
| NF M50-016-2000
|
燃气供应系统.运输和分配气体的气体压力调节站.功能要求
|
(Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements.)
|
| NF M60-312-1999
|
核能.环境放射性气体的测量.利用喷雾技术抽取的大气氚T的活性浓缩的液体闪烁的测定
|
(Nuclear energy. Measurement of environmental radioactivity-Air. Determination by liquid scintillation of the activity concentration of atmospheric tritium sampled by the sparging technique (air through water).)
|
| NF M62-301-4-2001
|
密封罩用组件.第4部分:通风和气体清洁系统(如:过滤器和疏水阀)的安全和调节阀门以及控制和保护装置
|
(Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.)
|
| NF P18-320-1999
|
混凝土、砂石和灰浆用添加剂.试验方法.第11部分:硬化混凝土中气体空隙特性的测定
|
(Admixtures for concrete, mortar and grout. Test methods. Part 11 : determination of air void characteristics in hardened concrete.)
|
| NF P50-767-2003
|
建筑物的隔热.建筑物中换气率的测定.示踪气体稀释法
|
(Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method.)
|
| NF P78-473-2003
|
建筑物用玻璃.隔热玻璃组件.第3部分:长期试验法以及漏气率和气体浓度公差的要求
|
(Glass in building - Insulating glass units - Part 3 : long term test method and requirements for gas leakage rate and for gas concentration tolerances.)
|
| NF R18-702-2-1992
|
道路车辆.3.5吨商业车辆上的自给式加热系统.第2部分:气体开动的丁烷/丙烷加热系统
|
(ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICLES OVER 3,5 T GVW(R). PART 2 : SPECIFIC SAFETY REQUIREMENTS FOR GAZ OPERATED BUTAN/PROPAN HEATING SYSTEMS.)
|
| NF R21-502-1984
|
道路车辆.有点火装置摩托车排出污染气体的测量方法
|
(Road vehicles. Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ingition engine.)
|
| NF S62-002-1991
|
防爆装置.第2部分:可燃气体在空气中的燃烧指数的测定.(欧洲标准 EN 26184~2)
|
(EXPLOSION PROTECTION SYSTEMS. PART 2 : DETERMINATION OF EXPLOSION INDICES OF COMBUSTIBLE GASES IN AIR. (EUROPEAN STANDARD EN 26184-2).)
|
| NF S62-003-1991
|
防爆装置.第3部分:除空气/粉末混合物和空气/煤气混合物以外的可燃混合气体在空气中的燃烧指数的测定.(欧洲
|
(EXPLOSION PROTECTION SYSTEMS. PART 3 : DETERMINATION OF EXPLOSION INDICES OF FUEL/AIR MIXTURES OTHER THAN DUST/AIR AND GAS/AIR MIXTURES. (EUROPEAN STANDARD EN 26184-3).)
|
| NF S62-131-2003
|
固定式消防系统.气体灭火系统用部件.第1部分:电自动控制和延迟装置的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 1 : requirements and test methods for electrical automatic control and delay devices.)
|
| NF S62-132-2003
|
固定式消防系统.气体灭火系统用元件.第5部分:非电子自动控制和延迟装置的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 2 : requirements and test methods for non-electrical automatic control and delay devices.)
|
| NF S62-133-2003
|
固定的消防设备.气体灭火设备用元部件.第3部分:手动触发装置和止动装置的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 3 : requirements and test methods for manual triggering and stop devices.)
|
| NF S62-135-2001
|
固定式消防系统.气体灭火系统用元件.第5部分:CO2系统用的高、低压选择器阀门及其起动器的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 5 : requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems.)
|
| NF S62-136-2001
|
固定式消防系统.气体灭火系统用元件.第6部分:CO2系统用的非电气失效装置的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 6 : requirements and test methods for non-electrical disable devices for CO2 systems.)
|
| NF S62-137-2001
|
固定式消防系统.气体灭火系统用元件.第7部分:CO2系统喷嘴的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 7 : requirements and test methods for nozzles for CO2 systems.)
|
| NF S62-138-1998
|
固定的消防装置.气体灭火装置用元件.第8部分:CO2装置用挠性连接器的要求和试验方法(欧洲标准EN 12094-8)
|
(Fixed firefighting system. Components for gas extinguishing systems. Part 8 : requirements and test methods for flexible connectors for CO2 systems.)
|
| NF S62-139-2003
|
固定的消防设备.气体灭火设备用元部件.第9部分:专用火灾探测器的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 9 : requirements and test methods for special fire detectors.)
|
| NF S62-140-2003
|
固定消防系统.气体灭火系统元件.第10部分:压力计和压力开关的试验方法和要求
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 10 : requirements and test methods for pressure gauges and pressure switches.)
|
| NF S62-141-2003
|
固定的消防设备.气体灭火设备用元部件.第11部分:机械配重设备的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 11: requirements and test methods for mechanical weighing devices.)
|
| NF S62-142-2003
|
固定消防系统.气体灭火系统用元件.第12部分:气动报警装置的规范和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 12 : requirements and test methods for pneumatic alarm devices.)
|
| NF S62-143-2001
|
固定的消防系统.气体灭火系统用元件.第13部分:止回阀的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 13 : requirements and test methods for check valves and non-return valves.)
|
| NF S62-146-2003
|
固定消防系统.气体灭火系统用元件.第16部分:CO2低压系统用添味设备的要求和试验方法
|
(Fixed firefighting systems - Components for gas extinguishing systems - Part 16 : requirements and test methods for odorizing devices for CO2 low pressure systems.)
|
| NF S66-202-2003
|
潜在爆炸性气体.防爆和防护.测定灰尘/空气混合物的最小点火能
|
(Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures.)
|
| NF S66-254-1-2003
|
气体和蒸气的最大爆炸压力和最大压升的测定.第1部分:最大爆炸压力的测定
|
(Determination of the maximum explosion pressure and maximum rate of pressure rise of gases and vapours - Part 1 : determination of the maximum explosion pressure.)
|
| NF S74-507-2001
|
防护服.化学试剂的防护.测定防护服面料耐液体和气体的渗透性
|
(Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases.)
|
| NF S74-512-1994
|
防护服.防护气体和蒸气的试验方法.泄漏的测定(内压力试验)
|
(PROTECTIVE CLOTHING. PROTECTION AGAINST LIQUID AND GASEOUS CHEMICALS, INCLUDING AEROSOLS LIQUID AND SOLID PARTICLES. TEST METHOD : DETERMINATION OF LEAK-TIGHTNESS OF GAS-TIGHT SUITS (INTERNAL PRESSURE TEST). (EUROPEAN STANDARD EN 464).)
|
| NF S74-527-1-2003
|
液体和气体化学物质(包括液体气溶胶和固体颗粒)的防护服装.第1部分:透气和不透气的“气密型“(1型)和“非气
|
(Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1 : performance requirements for ventilated and non-ventilated “gas-tight“ (Type 1) and “)
|
| NF S74-527-2-2002
|
防护液体和气体化学物质(包括液体气溶胶和固体颗粒)的防护服装.第2部分:急救队用气密性(1型)化学防护套装的
|
(Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2 : performance requirements for “gas-tight“ (Type 1) chemical protective suits for emerg)
|
| NF S76-016-2002
|
呼吸保护装置.防有毒气体和气体颗粒吸入的真空管过滤半罩式面具.要求,试验,标记
|
(Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking.)
|
| NF S76-017-1999
|
呼吸保护装置.无吸入阀和有防止气体或气体微粒或只有微粒的分隔滤膜的半口罩.(欧洲标准EN 1827)
|
(RESPIRATORY PROTECTIVE DEVICES. HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY. REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 1827).)
|
| NF S76-021-2000
|
呼吸保护装置.气体过滤器和组合过滤器.要求、试验、标记
|
(Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking.)
|
| NF S76-024-3-2003
|
呼吸保护器.气瓶阀.第3部分:潜水硝基气体和氧气气瓶的出口连接
|
(Respiratory protective devices - Gas cylinder valves - Part 3 : outlet connections for diving gases Nitrox and oxygen.)
|
| NF S76-025-1992
|
呼吸器官保护设备、过滤低沸点有机化合物的AX气体过滤器和复合过滤器.要求.试验.标记
|
(RESPIRATORY PROTECTIVE DEVICES. AX GAS FILTERS AND COMBINED FILTERS AGAINST LOW BOILING ORGANIC COMPOUNDS. REQUIREMENTS,TESTING,MARKING. (EUROPEAN STANDARD EN 371).)
|
| NF S76-026-1992
|
呼吸器官保护设备、过滤特定种名化合物的SX气体过滤器和复合过滤器.要求.试验.标记
|
(RESPIRATORY PROTECTIVE DEVICES. SX GAS FILTERS AND COMBINED FILTERS AGAINST SPECIFIC NAMED COMPOUNDS. REQUIREMENS,TESTING,MARKING. (EUROPEAN STANDARD EN 372).)
|
| NF S76-046-1997
|
自救式呼吸保护设备.有罩的独立式开路压缩气体呼吸仪.(有罩的压缩气体自救器).要求、检验和标志(欧洲标准EN
|
(RESPIRATORY PROTECTIVE DEVICES FOR SELF-RESCUE. SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD (COMPRESSED AIR ESCAPE APPARATUS WITH HOOD). REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 1146).)
|
| NF S76-061-2003
|
呼吸设备.使用压缩的硝基气体和氧气的开路自主式潜水仪.要求、试验、标记
|
(Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking.)
|
| NF S95-144-2000
|
病人呼吸混合气体用氧气监测仪.特殊要求
|
(Oxygen monitors for patient breathing mixtures - Particular requirements.)
|
| NF S95-148-1997
|
麻醉气体检测器
|
(ANEASTHETIC GAS MONITORS. (EUROPEAN STANDARD EN ISO 11196).)
|
| NF S95-154-1998
|
医用气体管道系统.第2部分:麻醉气体清除处理系统.基本要求
|
(Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.)
|
| NF S95-154/A1-2000
|
医用输气管道系统.第2部分:麻醉气体清除处置系统.基本要求
|
(Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.)
|
| NF S95-155-2000
|
医用气体管道系统.第3部分:压缩医用气体管道和真空管道
|
(Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.)
|
| NF S95-157-1-2001
|
麻醉和呼吸设备.人体增湿呼吸气体用热及水分交换器(HMEs).第1部分:250ml最小呼吸气容积的热及水分交换器
|
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1 : HMEs for use with minimum tidal volumes of 250 ml.)
|
| NF S95-157-2-2003
|
麻醉和呼吸设备.使人体呼吸气体增湿的热和湿气交换器(HMEs).第2部分:潮气量最小为250ml的气管造口病人用热
|
(Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2 : HMEs for use with tracheostomized patients having minimum tidal volumes)
|
| NF S95-159/A1-2002
|
医用气体压力调节器.第1部分:压力调节器和带流量计的压力调节器
|
(Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow metering devices.)
|
| NF S95-162-1998
|
医用气体管道系统.第1部分:医用压缩气体和真空装置的终端元件
|
(Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.)
|
| NF S95-163-1998
|
医用气体管道系统.第4部分:麻醉气体清除系统的终端元件
|
(Medical gas pipeline systems. Part 4 : terminal units for anaesthetic gas scavenging systems.)
|
| NF S95-169-1999
|
与医用气体管道系统终端元件连接的流量测量设备
|
(Flow-metering devices for connection to terminal units of medical gas pipeline systems.)
|
| NF S95-171-1999
|
医用气体用压力调节器.多功能的和线状压力调节器(欧洲标准738-2)
|
(PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 2 : MANIFOLD AND LINE PRESSURE REGULATORS. (EUROPEAN STANDARD EN 738-2).)
|
| NF S95-174-1998
|
医用气体用的低压软管组件
|
(Low-pressure hose assemblies for use with medical gases.)
|
| NF S95-174/A1-2002
|
医用气体用低压软管组件
|
(Low-pressure hose assemblies for use with medical gases.)
|
| NF S95-178-1998
|
医用气体用压力调节器.第3部分:与钢瓶阀门相结合的压力调节器(欧洲标准EN 738-3)
|
(PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 3 : PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES. (EUROPEAN STANDARD EN 738-3).)
|
| NF S95-178/A1-2002
|
医用气体压力调节器.第3部分:带瓶阀的压力调节器
|
(Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.)
|
| NF S95-179-1998
|
用于医用气体的压力调节器.第4部分:结合医用设备的低压调节器(欧洲标准EN 738-4)
|
(PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 4 : LOW-PRESSURE REGULATORS INTENDED FOR INCORPORATION INTO MEDICAL EQUIPMENT. (EUROPEAN STANDARD EN 738-4).)
|
| NF S95-179/A1-2002
|
医用气体压力调节器.第4部分:装入医疗设备的低压调节器
|
(Pressure regulators for use with medical gases - Part 4 : low-pressure regulators intended for incorporation into medical equipment.)
|
| NF S95-184-2000
|
医用气体用高压柔性连接件.
|
(High-pressure flexible connections for use with medical gases.)
|
| NF T20-037-1985
|
化工产品.挥气性液体和气体自燃温度的测定
|
(Chemical products of industrial use. Determination of temperature of auto-inflammation of volatil liquids and gases.)
|
| NF T20-040-1985
|
化工产品.固体和液体经过水解产生气体的着火点的测定
|
(CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF GASES FORMED AFTER HYDROLYSIS OF SOLIDS AND LIQUIDS.)
|
| NF T20-041-1985
|
化工产品.气体着火点的测定
|
(CHEMICAL PRODUCTS FOR INDUSTRIAL USE. DETERMINATION OF INFLAMMATION OF GASES.)
|
| NF T20-381-1977
|
工业氢氧化钾.碳酸盐含量的测定.气体定量分析法
|
(POTASSIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF CARBONATES CONTENT. GAS-VOLUMETRIC METHOD.)
|
| NF T20-427-1976
|
工业氢氧化钠.碳酸盐的测定.气体定量法
|
(SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF CARBONATES CONTENT. GAS VOLUMETRIC METHOD.)
|
| NF T20-524-1973
|
工业硅酸钠硅酸钾.碳酸钠和碳酸钾中二氧化硅含量的测定.气体定量法
|
(SODIUM AND POTASSIUM SILICATES FOR INDUSTRIAL USE. DETERMINATION OF CARBON DIOXIDE CONTENT EXPRESSED AS SODIUM OR POTASSIUM CARBONATE. GAS-VOLUMETRIC METHOD.)
|
| NF T47-306-2003
|
弹性密封件.输送气体和碳氢液体的管道和配件用密封件的材料要求
|
(Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.)
|
| NF T51-436-2002
|
塑料.酚醛树脂.用气体色谱法测定残余酚的含量
|
(Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.)
|
| NF T54-065-1-2003
|
气体燃料的塑料管道供应系统.聚乙烯(PE).第1部分:总则
|
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.)
|
| NF T54-065-2-2003
|
气体燃料的塑料管道供应系统.聚乙烯(PE).第2部分:管道
|
(Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.)
|
| NF T54-065-3-2003
|
气体燃料的塑料管道供应系统.聚乙烯(PE).第3部分:配件
|
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.)
|
| NF T54-065-4-2003
|
气体燃料的塑料管道供应系统.聚乙烯(PE).第4部分:阀门
|
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.)
|
| NF T54-065-5-2003
|
气体燃料的塑料管道供应系统.聚乙烯(PE).第5部分:系统的配合
|
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
|
| NF T60-254-1997
|
动植物油脂.固醇成份合成物测定.用高压液相色谱隔离固醇总量的气体色谱测定方法
|
(ANIMAL AND VEGETABLE FATS AND OILS. DETERMINATION OF THE COMPOSITION OF THE STEROL FRACTION. METHOD BY GAS CHROMATOGRAPHY WITH ISOLATION OF TOTAL STEROLS BY HPLC.)
|
| NF T60-502-1988
|
润滑剂、工业润滑油及其产品(L类).分类,第3B部分:D系列(气体和制冷压缩机用)
|
(LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 3B : FAMILY D (GAS AND REFRIGERATION COMPRESSORS).)
|
| NF T70-331-1995
|
军用高能材料.物理化学分析及特性.气体膨胀计测量抗拉试验过程中体积的变化
|
(ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. VOLUME VARIATION MEASUREMENT IN A TENSILE TEST BY FARRIS GAS DILATOMETER.)
|
| NF T90-324-1998
|
水质.消化污泥中有机化合物的“最大“厌氧生物降解性的评价.生物气体制品测量法
|
(Water quality. Evaluation of the “ultimate“ anaerobic biodegradability of organic compounds in digested sludge. Method by measurement of the biogas production.)
|
| NF X10-141-1982
|
密封管道中气体流量的测定.示踪法.第1部分：综合
|
(Measurement of gas flow in conduits. Tracer methods. Part 1 general.)
|
| NF X10-144-1982
|
密封管道中气体流量的测定.示踪法.第4部分：放射性示踪物的过渡时间法
|
(MEASUREMENT OF GAS FLOW IN CONDUITS. TRACER METHODS. PART 4 : TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.)
|
| NF X11-620-1996
|
通过气体吸收用Branauer、Emmet和Teller(BET)方法测定固体的比表面积
|
(Determination of the specific surface area of solids by gas adsorption using the bet method.)
|
| NF X11-621-1975
|
用气体吸附法测定粉末的单位面积.BET法.用低温氮气吸附作用测定体积
|
(DETERMINATION OF THE AREA PER UNIT MASS OF POWDERS (SPECIFIC SURFACE) BY MEANS OF GAS ADSORPTION. B.E.T. METHOD : VOLUMETRIC MEASUREMENT OF THE ADSORPTION OF NITROGEN AT LOW TEMPERATURES.)
|
| NF X11-622-1977
|
用气体吸附法测定粉末单位质量的面积.基本方法的多种解释
|
(DETERMINATION OF THE AREA PER UNIT MASS OF POWDERS (SPECIFIC SURFACE) BY MEANS OF GAS ADSORPTION. VARIOUS READINGS OF THE BASIC METHOD.)
|
| NF X20-101-1984
|
气体分析.词汇
|
(Gas analysis. Vocabulary.)
|
| NF X20-201-1979
|
气体分析.校准用混合气体.混合气体制备证书
|
(GAS ANALYSIS. CALIBRATION GAS MIXTURES. CERTIFICATE OF MIXTURE PREPARATION.)
|
| NF X20-202-1979
|
气体分析.校准用混合气体的制备.重量法
|
(GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. GRAVIMETRIC METHODS.)
|
| NF X20-203-1981
|
气体分析.校准用混合气体的制备.静态体积测定法
|
(Gas analysis. Preparation of calibration gas mixtures. Static volumetric methods.)
|
| NF X20-204-1974
|
气体分析.用配量活塞泵对气体混合物的动力制备进行校准的方法
|
(GAS ANALYSIS. METHOD FOR THE DYNAMIC PREPARATION OF GAS MIXTURES FOR CALIBRATION BY PROPORTIONING PISTON PUMPS.)
|
| NF X20-207-1982
|
气体分析.校准用混合气体成分的测定.比较法
|
(Gas analysis. Determination of composition of calibration gas mixtures. Comparison methods.)
|
| NF X20-209-1979
|
气体分析.校准用混合气体的制备.渗透法
|
(GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. PERMEATION METHOD.)
|
| NF X20-211-1983
|
气体分析.校准用混合气体的制备.单位质量动力法
|
(GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. MASS DYNAMIC METHOD.)
|
| NF X20-212-1986
|
气体分析.校正混合的制备.动态容量法.第1部分:计算法
|
(GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. DYNAMIC VOLUMETRIC METHODS. PART 1 : METHODS OF CALIBRATION.)
|
| NF X20-214-1986
|
气体分析.校正混合的的制备.动态容量法.第3部分:定期注入流动气流
|
(Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 3 : periodic injections into a flowing gas stream.)
|
| NF X20-215-1986
|
气体分析.校正混合的的制备.动态容量法.第4部分:连续注入法
|
(GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. DYNAMIC VOLUMETRIC METHODS. PART 4 : CONTINUOUS INJECTION METHOD.)
|
| NF X20-217-1986
|
气体分析.校正混合的的制备.动态容量法.第6部分:声学孔
|
(Gas analysis. Preparation of calibration gas mixtures. Dynamic volumetric methods. Part 6 : sonic orifices.)
|
| NF X20-220-1981
|
用比较法进行校准用混合气体的鉴定
|
(ANALYSIS OF GASES. CHECKING OF CALIBRATION GAS MIXTURES BY A COMPARISON METHOD.)
|
| NF X20-251-1982
|
气体分析.供应分析装置用的气体取样和输送设备
|
(Analysis of gases. Devices for the sampling of gases and their transfer to an analytical unit.)
|
| NF X20-302-1974
|
质谱仪进行气体分析.化学成分的测定
|
(GAS ANALYSIS BY MASS SPECTROMETRY. DETERMINATION OF GAS CHEMICAL COMPOSITION.)
|
| NF X20-303-1974
|
气相色层分离法进行气体分析
|
(GAS ANALYSIS BY MEANS OF GAS CHROMATOGRAPHY.)
|
| NF X20-305-1975
|
电导法进行气体分析
|
(GAS ANALYSIS BY ELECTRICAL CONDUCTIMETRY.)
|
| NF X20-307-1977
|
比色法进行气体分析
|
(GAS ANALYSIS BY COLORIMETRY.)
|
| NF X20-350-1979
|
气体分析.二氧化硫的分析.分析方法选择指南
|
(GAS ANALYSIS. SULFUR DIOXIDE ANALYSIS. GUIDE FOR THE CHOICE OF THE ANALYSIS METHODS.)
|
| NF X20-354-1975
|
气体分析.连续比色法测定二氧化硫
|
(GAS ANALYSIS - DETERMINATION OF SULPHUR DIOXIDE BY CONTINUOUS COULOMETRIC METHOD.)
|
| NF X20-355-1975
|
气体分析.电导法测定二氧化硫
|
(GAS ANALYSIS-DETERMINATION OF SULFUR DIOXIDE BY ELECTRICAL CONDUCTIMETRY.)
|
| NF X20-361-1976
|
气体分析.非扩散红外线辐射束吸收法测定一氧化碳
|
(GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY ABSORPTION OF A NON DISPERSIVE INFRA-RED RADIATION BEAM.)
|
| NF X20-363-1978
|
气体分析.气相色层分离法测定一氧化碳
|
(GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY MEANS OF GAS CHROMATOGRAPHY.)
|
| NF X20-378-1979
|
气体分析.氧含量分析.固体电解电化学法
|
(GAS ANALYSIS. OXYGEN ANALYSIS. ELECTROCHEMICAL METHOD WITH SOLID ELECTROLYTE.)
|
| NF X20-379-1979
|
气体分析.氧含量分析.液体或凝胶电解的电化学法
|
(GAS ANALYSIS. OXYGEN ANALYSIS. ELECTROCHEMICAL METHODS WITH LIQUID OR GELLED ELECTROLYTE.)
|
| NF X20-380-1979
|
气体分析.二氧化碳的分析.分析方法选择指南
|
(GAS ANALYSIS. CARBON DIOXIDE ANALYSIS. GUIDE FOR THE CHOICE OF THE ANALYSIS METHODS.)
|
| NF X20-510-3-2003
|
天然气.用气相色谱法测定规定了不确定度的组分.第3部分:用两填充柱测定氢、氦、惰性气体和碳最高至C8的烃类
|
(Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3 : determination of hydrogen, helium, inert gases and hydrocarbons up to C8 using two packed columns.)
|
| NF X20-521-1981
|
气体分析.天然气露点的测定.表面冷却露点湿度计
|
(Gas analysis. Determination of the water dew point of natural gas. Cooled surface condensation hygromete%rs.)
|
| NF X20-702-2000
|
化学呼吸分析计.用呼出气体分析来估计乙醇浸润.规范和试验方法
|
(Chemical breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.)
|
| NF X20-703-2000
|
1级电子呼吸分析计.用呼出气体分析来估计乙醇浸润.规范和试验方法
|
(Class 1 electronic breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.)
|
| NF X20-704-2000
|
2级电子呼吸分析仪.通过对呼出的气体分析对乙醇的估计.规范和试验方法
|
(Class 2 electronic breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.)
|
| NF X43-010-1975
|
大气污染.酸性气体污染指数的测定
|
(AIR POLLUTION. DETERMINATION OF A GAZEOUS ACID POLLUTION INDEX.)
|
| NF X43-011-1975
|
大气污染.周围空气中含硫气体的测定取样设备和方法
|
(AIR POLLUTION. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR SAMPLING EQUIPMENT AND METHOD.)
|
| NF X43-016-1977
|
大气污染.酸性气体污染指数的测定方法（用当量ＳＯ2表示）.连续取样自动顺序分析方法
|
(METHOD FOR THE DETERMINATION OF AN ACID GAS POLLUTION INDEX(EXPRESSED AS SO2 EQUIVALENT)USING A CONTINUOUS SAMPLING AUTOMATIC SEQUENTIAL ANALYSER.)
|
| NF X43-060-1-2003
|
环境空气质量.测定气体和蒸气浓度的扩散取样机.要求和试验方法.第1部分:一般要求
|
(Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1 : general requirements.)
|
| NF X43-060-2-2003
|
环境空气质量.测定气体和蒸气浓度的扩散取样机.要求和试验方法.第2部分:特殊要求和试验方法
|
(Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2 : specific requirements and test methods.)
|
| NF X43-101-1986
|
空气质量.气体排出物气味的测定方法.承受限度的稀度系数的测定
|
(Air quality. Method of measurement of the odour of gaseous effluent. Determination of the dilution factor at the threshold of perception.)
|
| NF X43-104-1995
|
空气质量.有气味的气体.取样方法
|
(Air quality. Odoring atmospheres. Sampling methods.)
|
| NF X43-246-1-2000
|
工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第1部分:一般要求和试验方法
|
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1 : general requirements and test methods.)
|
| NF X43-246-2-2000
|
工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第2部分:用于测量限定值范围内的电气装置
|
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2 : performance requirements for apparatus used for me)
|
| NF X43-246-3-2000
|
工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第3部分:用于测量限定值范围之上的电气装
|
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3 : performance requirements for apparatus used for me)
|
| NF X43-246-4-2000
|
工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第4部分:选择,使用安装和维修指南
|
(Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4 : guide for selection, installation, use and mainten)
|
| NF X43-278-1996
|
工作场所的空气.测定气体和水蒸气用的扩散取样器.要求和试验方法
|
(WORKPLACE ATMOSPHERES. DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF GASES AND VAPOURS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 838).)
|
| NF X43-279-1995
|
工作场所的气体.为与极限值比较和测量对策用评定化学试剂影响的导则
|
(WORKPLACE ATMOSPHERES. GUIDANCE FOR THE ASSESSMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS FOR COMPARISON WITH LIMIT VALUES AND MEASUREMENT STRATEGY. (EUROPEAN STANDARD EN 689).)
|
| NF X43-286-1997
|
工作环境的空气.气体和蒸汽测定用抽气式吸附管.要求和试验方法(欧洲标准EN 1076)
|
(WORKPLACE ATMOSPHERES. PUMPED SORBENT TUBES FOR THE DETERMINATION OF GASES AND VAPOURS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1076).)
|
| NF X43-320-1998
|
空气质量.稳定源辐射.HCI测定的手工方法.第1部分:气体取样
|
(Air quality. Stationary source emissions. Manual method of determination of HCI. Part 1 : sampling of gases.)
|
| NF X43-321-1998
|
空气质量.稳定源辐射.HCI测定的手工方法.第2部分:气体化合物吸收
|
(Air quality. Stationary source emissions. Manual method of determination of HCI. Part 2 : gaseous compounds absorption.)
|
| NF X43-328-1999
|
稳定源辐射.烟道气体低浓度时所有气化有机碳浓缩质量的测定.连续火焰离子检测器法
|
(STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON AT LOW CONCENTRATIONS IN FLUE GASES. CONTINUOUS FLAME IONISATION DETECTOR METHOD. (EUROPEAN STANDARD EN 12619).)
|
| NF X43-640-2002
|
气体分析.词汇
|
(Gas analysis - Vocabulary.)
|
| NF X44-014-1-1998
|
高效气体过滤器(HEPA和ULPA).第1部分:分类、性能试验和作标记
|
(High efficiency air filters (HEPA and ULPA). Part 1 : classification, performance testing, marking.)
|
| NF X44-014-2-1998
|
高效气体过滤器(HEPA和ULPA).第2部分:烟雾质产品测量设备和粒子计数统计
|
(High efficiency air filters (HEPA and ULPA). Part 2 : aerosol production, measuring equipment, particle counting statistics.)
|
| NF X44-014-3-1998
|
高效气体过滤器(HEPA和ULPA).第3部分:平板过滤器介质试验
|
(High efficiency air filters (HEPA and ULPA). Part 3 : testing flat sheet filter media.)
|
| NF X50-001-5-2-1998
|
发电站设备的采购指南.第5-2部分:涡轮机.气体涡轮机
|
(Guide for procurement of power station equipment. Part 5-2 : turbines. Gas turbines.)
|
| NF X70-100-1-2001
|
燃烧试验.废气的分析.第1部分:热降解产生气体的分析方法
|
(Fire tests - Analysis of gaseous effluents - Part 1 : methods for analysing gases stemming from thermal degradation.)
|
| NF X70-101-1987
|
防火安全.燃烧试验.燃烧和裂解气体的分析.烟室法
|
(Safety against fire. Fire behaviour tests. Analysis of gases resulting of combustion or pyrolysis. Test chamber method.)
|
| XP D36-127-1999
|
用在家畜饲养棚的气体燃料装置的室外连接系统
|
(Outdoor connection system for gaseous fuel appliances used in livestock breeding buildings.)
|
| XP E29-140-1999
|
使用气体燃料的家用装置的控制阀.安全控制阀(带有集中自动密闭器的)
|
(Control cocks for household appliances using gaseous fuels - Safety cocks (with integrated automatic obturator).)
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com