5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




欧洲气体标准(EN gas standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号 中文名称 英文名称
CR 1404-1994 型式试验时气体燃料器具的排放的测定 Determination of emissions from appliances burning gaseous fuels during type-testing
CR 1472-1997 关于气体用具标识的通用指南 General guidance for the marking of gas appliances
CR 1749-2001 欧洲依照产品燃烧(各类)排空法的气体燃具分类体系 European scheme for the classification of gas appliances according to the method of evacuation of the products of combustion (types)
EN 10276-2-2003 钢铁材料的化学分析 钢和铁中氧的测定 第2部分:在惰性气体条件下熔融后用红外光谱法测定 Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
EN 10301-2003 岸上和海上管路钢管及配件 减小非腐蚀性气体输送摩擦力的内涂层 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
EN 1057-1996 铜和铜合金 在卫生和加热器中输送水和气体用无缝圆铜管 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1074-4-2000 供水阀门 目的要求的适应性和合适的认证试验 第4部分:气体阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
EN 1076-1997+AC-1997 工场环境 测定气体和蒸气用的泵吸附管 要求和试验方法 Workplace atmospheres - Pumped sorbent tubes for the determination of gases and vapours - Requirements and test methods
EN 1084-1995 胶合板 用气体分析法测定甲醛释放级别 Plywood - Formaldehyde release classes determined by the gas analysis method
EN 1106-2001 气体燃烧器具用人工操作丝锥 Manually operated taps for gas burning appliances
EN 1127-1-1997 爆炸性气体 爆炸防止和防护 第1部分:.基本概念和方法 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 1127-2-2002 爆炸性气体 爆炸防止和防护 第2部分:.采矿的基本概念和方法 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 12022-1999 血液气体交换器 Blood gas exchangers
EN 12071-1999 焊接易耗品 耐蠕变钢的气体遮蔽金属电弧焊用管状焊条 分级 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification
EN 12073-1999 焊接易耗品 不锈钢和耐热钢有或无气体遮蔽金属电弧焊接用管状有芯焊条 分级 Welding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification
EN 12083-1998+AC-2000 呼吸保护装置 带呼吸软管的过滤器(无面罩式过滤器) 微粒过滤器、气体过滤器和混合式过滤器 要求、试验 Respiratory protective devices - Filters with breathing hoses (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
EN 12094-1-2003 固定式消防系统 气体灭火系统的部件 第1部分:对电自动控制和延迟装置的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices
EN 12094-10-2003 固定式消防系统 气体灭火系统的部件 第10部分:对压力计压力开关的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
EN 12094-11-2003 固定式消防系统 气体灭火系统的部件 第11部分:机械称重装置的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
EN 12094-12-2003 固定式消防系统 气体灭火系统的部件 第12部分:气体报警装置的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices
EN 12094-13-2001+AC-2002 固定式消防系统 气体灭火系统的部件 第13部分:对止回阀和非回流阀的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
EN 12094-16-2003 固定式消防系统 气体灭火系统的部件 第16部分:对CO2低压系统的气味测定装置的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 16: Requirements and test methods for odorizing devices for CO<(Index)2> low pressure systems
EN 12094-2-2003 固定式消防系统 气体灭火系统的部件 第2部分:对非电自动控制和延迟装置的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electric automatic control and delay devices
EN 12094-3-2003 固定式消防系统 气体灭火系统的部件 第3部分:对手动触发和停止装置的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices
EN 12094-5-2000 固定式消防系统 气体灭火系统的部件 第5部分:高、低压选择阀及其CO2系统驱动器触发要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO<(Index)2> systems
EN 12094-6-2000 固定式消防系统 气体灭火系统的部件 第6部分:对CO2系统的非电阻塞装置的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO<(Index)2> systems
EN 12094-7-2000 固定式消防系统 气体灭火系统的部件 第7部分:对CO2系统的喷嘴的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO<(Index)2> systems
EN 12094-8-1998 固定式消防系统 气体灭火系统的部件 第8部分:二氧化碳设备用挠性连接器的要求及试验方法 Fixed fire fighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for flexible connectors for CO<(Index)2> systems
EN 12094-9-2003 固定式消防系统 气体灭火系统的部件 第9部分:对专用火焰探测器的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors
EN 12115-1999 液体或气体化学药品用的橡胶和热塑软管和软管组件 规范 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
EN 12405-2002 气量计 气体体积电子转换装置 Gas meters - Gas-volume electronic conversion devices
EN 12534-1999 焊接消耗品 高强度钢气体保护金属电弧焊用丝状电极、焊丝和焊条和沉渍物 分类 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification
EN 12535-2000 焊接消耗品 高强度钢气体保护金属电弧焊用管型药芯焊条 分类 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification
EN 12561-3-2002 铁路用 油罐车 第3部分:加压液化气体用罐底加注和排空装置 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquified under pressure
EN 1266-2002 为使助燃空气和燃料气体或加速传输装入风扇的独立对流燃烧火焰加热器 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
EN 1279-3-2002 建筑玻璃 隔离玻璃装置 第3部分:漏气率和气体浓度容差的长期试验方法和要求 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
EN 13014-2000 与麻醉和呼吸设备相连的气体采样管连接器 Connections for gas sampling tubes to anaesthetic and respiratory equipment
EN 13090-2000 建筑物中气体管道螺纹接头再密封方法 Means for resealing threaded joints of gas pipework in buildings
EN 13185-2001 无损检测 密封试验 示踪气体法 Non-destructive testing - Leak testing - Tracer gas method
EN 13192-2001 无损检测 密封试验 气体标准漏出物校准 Non destructive testing - Leak testing - Calibration of reference leaks for gases
EN 13220-1998 与医用气体管道系统的终端设备相连的流量计 Flow-metering devices for connection to terminal units of medical gas pipeline systems
EN 13221-2000 医用气体用高压挠性连接 High pressure flexible connections for use with medical gases
EN 1326-1996 气焊设备 气体钎焊和定位焊接用小型设备 Gas welding equipment - Small kits for gas brazing and welding
EN 13348-2001 铜和铜合金 医用气体或真空用无缝圆铜管 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
EN 13528-1-2002 环境空气质量 测定气体和蒸气浓度的扩散取样器 要求和试验方法 第1部分:一般要求 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements
EN 13528-2-2002 环境空气质量 测定气体和蒸气浓度的扩散取样器 要求和试验方法 第2部分:特殊要求和试验方法 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods
EN 13625-2001 无损检测 检漏 测量气体泄漏的仪器的选择指南 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
EN 13673-1-2003 最大爆炸压力及气体和蒸汽压力最大上升速度的测定 第1部分:最大爆炸压力的测定 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure
EN 13774-2003 最大工作压力小于或等于16 bar的气体分配系统用阀门 性能要求 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 14031-2003 工作环境 空气中有毒气体的测定 Workplace atmospheres - Determination of airborne endotoxin
EN 14091-2002 航天产品质量保证 航天材料筛屑的热真空气体释放试验 Space product assurance - Thermal vacuum outgassing test for the screening of space materials
EN 141-2000 呼吸保护装置 气体过滤器和组合过滤器 要求、测试、标志 Respiratory protective devices - Gas filters and combined filters - Requirements, testing, marking
EN 14100-2001 航天产品质量保证 用于有人驾驶的航天宇航舱废的材料和装配器件的释放气体的测定 Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
EN 14382-2002 气压调节站的安全设备和安装 入口压力达100bar的气体安全关闭装置 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
EN 144-3-2003 呼吸保护装置 气瓶阀 第3部分:潜水气体硝基氧和氧气的出口连接 Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen
EN 1555-1-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第1部分:总则 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
EN 1555-2-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第2部分:管材 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
EN 1555-3-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第3部分:管件 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
EN 1555-4-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第4部分:阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
EN 1555-5-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第5部分:针对系统用途的适合性 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 161-2001 气体燃烧器和燃气器具自动关闭阀 Automatic shut-off valves for gas burners and gas appliances
EN 1643-2000 气体燃烧器和气体设备自动关闭阀门的阀门检验系统 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
EN 1668-1997 焊接耗材 非合金和细晶粒钢的惰性气体保护钨极焊用焊条 焊丝和熔敷 分类 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification
EN 1755-2000 工业用卡车的安全 潜在爆炸环境下的操作 在可燃气体、蒸气、 潮湿和灰尘中使用 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust
EN 1775-1998+A1-2000+A2-2000 供气 建筑物中的气体管道工程 最大运转压力≤5巴功能推荐 Gas supply - Gas pipework for buildings - Maximum operating pressure 5 bar - Functional recommendations
EN 1797-2001 低温容器 气体/材料兼容性 Cryogenic vessels - Gas/material compatibility
EN 1827-1999 呼吸保护装置 防止气体或气体和微粒或仅防颗粒的无吸入阀和带可分离过滤器的半掩面罩 要求、试验和标记 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
EN 1834-1-2000 往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第1部分:用在可燃气体和蒸气环境的II组 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
EN 1839-2003 气体和蒸气爆炸限值的测定 Determination of explosion limits of gases und vapours
EN 1854-1997+A1-1998 气体燃烧器和气体燃烧器具的压敏器件 Pressure sensing devices for gas burners and gas burning appliances
EN 1911-1-1998 固定源辐射 HCI的人工测定法 第1部分:气体的抽样 Stationary source emissions - Manual method of determination of HCl - Part 1: Sampling of gases
EN 1911-2-1998 固定源辐射 HCI的人工测定法 第2部分:气体混合物吸收 Stationary source emissions - Manual method of determination of HCl - Part 2: Gaseous compounds absorption
EN 1975/prA1-2003 可运输气瓶 容积从0.5L至150L可再灌装可运输无缝铝和铝合金气体瓶设计和结构规范 修改A1 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; Amendment A1 / Note: Intended as an amendment to EN
EN 203-1-1992+A1-1995+A2-1999 气体加热供膳设备 第1部分:安全要求 Gas heated catering equipment; part 1: safety requirements
EN 203-2-1995 气体加热供膳设备 第2部分:能源的合理使用 Gas heated catering equipment - Part 2: Rational use of energy
EN 26184-2-1991 抑爆系统 第2部分:空气中易燃气体爆炸指数的测定 Explosion protection systems; part 2 : determination of explosion indices of combustible gases in air (ISO 6184-2:1985)
EN 26184-3-1991 抑爆系统 第3部分:除粉尘/空气和气体/空气混合物以外的燃料/空气混合物爆炸指数的测定 Explosion protection systems; Part 3 : Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures (ISO 6184-3:1985)
EN 26848-1991 惰性气体保护电弧焊接以及等离子气体切割和焊接用的钨极 编码 Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding- Codification (ISO 6848:1984)
EN 28846-1993+A1-2000 小艇 电气装置 周围可燃气体的防燃防护 Small craft; electrical devices; protection against ignition of surrounding flammable gases (ISO 8846:1990)
EN 308-1997 热交换器 对空气和烟道气体热恢复装置建立空气性能的试验过程 Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices
EN 334-1999+A1-2000 入口压力不超过100 bar的气体压力调节器 Gas pressure regulators for inlet pressures up to 100 bar
EN 371-1992 呼吸保护设备 抗低沸点有机化合物的AX气体过滤器和综合过滤器 要求、测试、标志 Respiratory protective devices; AX gas filters and combined filters against low boiling organic compounds; requirements, testing, marking
EN 372-1992 呼吸保护设备 抗特定化合物的SX气体过滤器和综合过滤器 要求、测试、标志 Respiratory protective devices; SX gas filters and combined filters against specific named compounds; requirements, testing, marking
EN 377-1993 使用工业过程中应用的可燃气体以外气体的器具及有关控制装置应用的润滑剂 Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
EN 405-2001 呼吸保护设备 防气体或防气体和颗粒的阀滤式半面罩 要求、测试和标志 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
EN 437-2003 试验气体 试验压力 器具分类 Test gases - Test pressures - Appliance categories
EN 439-1994 焊接消耗品 电弧焊和切割用保护气体 Welding consumables - Shielding gases for arc welding and cutting
EN 440-1994 焊接消耗品 非合金与细粒钢的气体保护金属电弧焊用丝状电极和沉积物 分类 Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification
EN 45544-1-1999 工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第1部分:试验方法和一般要求 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
EN 45544-2-1999 工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第2部分:极限值域内浓度测量用设备的性能 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values
EN 45544-3-1999 工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第3部分:大大超过极限值的浓度测量用设备 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values
EN 45544-4-1999 工作场所 有毒气体和蒸气的直接检测和直接浓度测量用电气设备 第4部分:.选择、安装、使用和维修的指南 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
EN 50107-1-2002 无荷载额定输出电压大于1kV小于10kV的标志灯和气体放电管装置 第1部分:一般要求 Signs and luminious-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV - Part 1: General requirements / Note: To be amended by EN 50107-1/prA1 (2003-09).
EN 50143-1997+A1-2003 无荷载额定输出电压大于1KV小于10KV的标志灯和气体放电管装置用电缆 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
EN 50194-2000 探测房屋内易燃气体的电气装置 测试方法及性能要求 Electrical apparatus for the detection of combustible gases in domestic premises - Test methods and performance requirements
EN 50241-1-1999 可燃或毒性气体和蒸气的检测用开路仪器规范  第1部分:一般要求和试验方法 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 1: General requirements and test methods
EN 50241-2-1999 可燃或毒性气体和蒸气的检测用开路仪器规范  第2部分:可燃气体检测用仪器的性能要求 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2: Performance requirements for apparatus for the detection of combustible gases
EN 50244-2000 家用易燃气体探测用电气设备 选择、安装、使用和维修指南 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
EN 50267-1-1998 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第1部分:装置 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus
EN 50267-2-1-1998 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-1部分:程序 氢卤酸气体量的测 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas
EN 50267-2-2-1998 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-2部分:程序 通过测量 pH 值和 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
EN 50267-2-3-1998 在着火条件下电缆的一般测试方法 电缆材料燃烧过程中放出气体的试验 第2-3部分:程序 通过测量 pH 值和 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity Partly Supersedes HD602S1:1992
EN 50270-1999 电磁兼容性 探测和测量易燃气体、有毒气体或氧气的电气装置 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
EN 50271-2001 探测和测量易燃气体、有毒气体或氧气的电气装置 使用软件和(或)数字技术装置的要求和测试 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
EN 60068-2-60-1996 环境试验 第2-60部分:试验方法 试验Ke:流动混合气体的腐蚀试验 Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test (IEC 60068-2-60:1995)
EN 60079-15-2003 爆炸气体用电气设备 第15部分:防护类型n Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection "n" (IEC 60079-15:2001, modified)
EN 60079-7-2003 爆炸气体用电气设备 第7部分:增强安全性e Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety "e" (IEC 60079-7:2001) / Note: Endorsement notice
EN 60512-11-14-1997 电子设备用机电元件 基本试验规程和测量方法  第11部分:气候试验 第14节:试验11p 流动的单种气体腐蚀 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 14: Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:1996)
EN 60512-11-7-2003 电子设备用连接器 基本和测量 气候试验 第11-7部分:试验11g 流动混合气体腐蚀性试验 Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests; Test 11g: Flowing mixed gas corrosion test (IEC 60512-11-7:2003) / Note: Endorsement notice
EN 60517-1996+A11-1999 额定电压72.5kv及以上的气体绝缘的金属封闭开关设备 Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above (IEC 60517:1990 + Corrigendum 1995 + A1:1994)
EN 60567-1992 充油电气设备中气体和油取样及游离和溶解气体分析指南 Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases (IEC 60567:1992)
EN 60599-1999 矿物油浸渍的电气设备 不溶解的和自由气体分析说明指南 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999)
EN 60749-7-2002 半导体器件 机械和气候试验方法 第7部分:内部含水量测量和其它残留气体分析 Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases (IEC 60749-7:2002) / Note: Endorsement notice
EN 61010-2-042-1997 测量、控制和实验室用电气设备的安全要求 第2-042部分:医用材料处理及实验室加工用毒性气体蒸压器和消毒 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010)
EN 61010-2-043-1997 测量、控制和实验室用电气设备的安全要求 第2-043部分:医用材料处理及实验室加工用热空气或热惰性气体干 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory proc
EN 61181-1993 浸渍绝缘材料 溶解气体分析(DGA)应用于电气设备的工厂试验 Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993)
EN 61207-1-1994 气体分析器的性能表示 第1部分:总则 Expression of performance of gas analyzers; part 1: general (IEC 61207-1:1994)
EN 61207-2-1994 气体分析器的性能表示 第2部分:气体中的氧(利用高温电化学传感器) Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994)
EN 61207-3-2002 气体分析器 性能表示 第3部分:顺磁氧气分析器 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002) / Note: Endorsement notice
EN 61207-3/prA1-1999 气体分析器 性能表示 第3部分:顺磁氧气分析器 修改prA1 Amendment 1 to IEC 61207-3: Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
EN 61207-6-1994 气体分析器的性能表示 第6部分:光度分析器 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994)
EN 61347-2-10-2001 灯的控制装置 第2-10部分:高频冷起动管形气体放电灯(霓虹灯管)用电子逆变器和变流器的特殊要求 Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) (IEC 61347-2-10:2000)
EN 61347-2-9-2001 灯的控制装置 第2-9部分:气体放电灯(荧光灯除外)用镇流器的特殊要求 Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-9:2000)
EN 61347-2-9/prA1-2003 灯的控制装置 第2-9部分:气体放电灯(荧光灯除外)用镇流器的特殊要求 修改prA1 IEC 61347-2-9, Am. 1: Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
EN 61643-311-2001 低压浪涌保护装置元件 第311部分:气体放电管规范 Components for low-voltage surge protective devices - Part 311: Specifications for gas discharge tubes (GDT) (IEC 61643-311:2001)
EN 61779-1-2000 可燃性气体的检测和测量用电气设备 第1部分:一般要求和试验方法 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods (IEC 61779-1:1998, modified)
EN 61779-2-2000 可燃性气体的检测和测量用电气设备 第2部分:指示空气中甲烷体积百分率最大为5%的I类设备的性能要求 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air (IEC 61779-2:1998, modified)
EN 61779-3-2000 可燃性气体的检测和测量用电气设备 第3部分:指示空气中甲烷体积百分率最大为100%的I类设备的性能要求 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air (IEC 61779-3:1998, modified)
EN 61779-4-2000 可燃性气体的检测和测量用电气设备 第4部分:指示体积百分率最大为100%低爆炸物极限的II类设备的性能要求 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit (IEC 61779-4:1998, modified)
EN 61779-5-2000 可燃性气体的检测和测量用电气设备 第5部分:指示气体体积百分率最大为100%的II类设备的性能要求 Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas (IEC 61779-5:1998, modified)
EN 621-1998+A1-2003 无风扇支持燃烧气体及/或燃烧物质移动、净热输入功率不超过300kW的空间加热用非家用燃气强制对流空气加热器 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 676-2003 气体燃料用自动强制鼓风燃烧器 Automatic forced draught burners for gaseous fuels
EN 682-2002 弹性密封件 用于运送气体和碳氢化合物液体的管道和配件的密封件的材料要求 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 717-2-1994 木基板 甲醛释放量的测定 第2部分:用气体分析法测定甲醛释放量 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method
EN 720-1-1999 可运输气瓶 气体和气体混合物 第1部分:纯气体的特性 Transportable gas cylinders - Gases and gas mixtures - Part 1: Properties of pure gases
EN 720-2-1996 可移动气瓶 气体和气体混合物 第2部分:气体和气体混合物的可燃性和氧化能力测定 Transportable gas cylinders - Gases and gas mixtures - Part 2: Determination of flammability and oxidizing ability of gases and gas mixtures
EN 725-3-1994 先进技术陶瓷 陶瓷粉的试验方法 第3部分:带运载气体的热萃取法测定非氧化物中氧的含量 Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
EN 737-1-1998 医疗气体管道系统 第1部分:压缩医疗气体和真空用终端设备 Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum
EN 737-2-1998+A1-1999+AC-2000 医疗气体管道系统 第2部分:麻醉气体净化处理系统 基本要求 Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems - Basic requirements
EN 737-3-1998+A1-1999+AC-2000 医疗气体管道系统 第3部分:压缩医疗气体和真空用管道 Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum
EN 737-4-1998 医疗气体管道系统 第4部分:麻醉气体净化系统的终端设备 Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems
EN 738-1-1997+A1-2002 医用气体用压力调节器 第1部分:压力调节器和有流量计装置的压力调节器 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices
EN 738-2-1998 医用气体用压力调节器 第2部分:多管和单管压力调节器 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
EN 738-3-1998+A1-2002 医用气体用压力调节器 第3部分:带气瓶阀的压力调节器 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
EN 738-4-1998+A1-2002 医用气体用压力调节器 第4部分:医疗设备用低压压力调节器 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators intended for incorporation into medical equipment
EN 739-1998+A1-2002 医疗气体设备用低压软管组件 Low-pressure hose assemblies for use with medical gases
EN 746-3-1997 工业热处理设备 第3部分:环境气体产生和使用的安全要求 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 758-1997 焊接消耗品 带和不带气体保护壳的非合金钢及细粒钢金属电弧焊接用管状芯焊条 分类 Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification
EN 778-1998+A1-2001 无风扇支持燃烧气体及/或燃烧物质移动、净热输入功率不超过70kW的空间加热用家用气体燃烧强制对流空气加热 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 838-1995 工作场所的空气 测定气体和水蒸汽用的扩散取样器 要求和试验方法 Workplace atmospheres - Diffusive samplers for the determination of gases and vapours - Requirements and test methods
EN 874-1995 气焊设备 圆柱筒焊接用氧/燃料气体焊炬(切割机型) 结构型式、一般规范和试验方法 Gas welding equipment - Oxygen/fuel gas blowpipes (cutting machine type) of cylindrical barrel - Type of construction, general specifications, test methods
EN 993-4-1995 成形致密耐火制品的试验方法 第4部分:气体渗透性测定 Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases
EN ISO 10062-1995 人工环境中低浓度污染气体腐蚀程度的试验 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:1991)
EN ISO 10882-1-2001 焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第1部分:空气中粒子取样 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operators breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2001)
EN ISO 10882-2-2000 焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第2部分:气体取样 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operatiors breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)
EN ISO 11114-1-1997+AC-1998 可运输气瓶 气瓶和瓶阀材料与盛装气体的相容性 第1部分:金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997)
EN ISO 11114-2-2000 可运输气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分:非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000)
EN ISO 11114-3-1997 可运输气瓶 气瓶和瓶阀材料与盛装气体的相容性 第3部分:氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997)
EN ISO 11196-1997 麻醉气体监视器(包括技术勘误1) Aneasthetic gas monitors (ISO 11196:1995 including Technical Corrigendum 1:1997)
EN ISO 1183-3-1999 塑料 非泡沫塑料的密度测定方法 第3部分:气体比重瓶法 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
EN ISO 12569-2000 建筑物热性能 建筑物的换气率测定 示踪气体稀释法 Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000)
EN ISO 13631-2002 石油和天然气工业 整装往复式气体压缩机 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
EN ISO 15011-1-2002 焊接和有关工艺中的卫生和安全 电弧焊产生的烟尘和气体取样的实验室方法 第1部分:颗粒烟尘分析取样和产 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1: Determination of emission rate and sampling for analysis of particulate fume (ISO 15011-1:2002)
EN ISO 15011-2-2003 焊接和有关工艺中的健康和安全 电弧焊产生的烟尘和气体取样的实验室方法 第2部分:除臭氧外、各种气体产 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone (ISO 15011-2:2003)
EN ISO 15011-3-2002 焊接和有关工艺中的健康和安全 电弧焊产生的烟尘和气体取样的实验室方法 第3部分:在固定点测定臭氧浓度 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 3: Determination of ozone concentration using fixed point measurements (ISO 15011-3:2002)
EN ISO 6551-1995 石油液体和气体 动态测量的精度和可靠性 电脉冲数据和/或电子脉冲数据的电缆传输 Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982)
EN ISO 8178-1-1996 往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996)
EN ISO 8178-2-1996 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996)
EN ISO 8974-2002 塑料 酚醛树脂 用气体色谱法测定残余酚含量 Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002)
EN ISO 9300-1995 用文杜利临界流量喷嘴测定气体流量 Measurement of gas flow means of critical flow Venturi nozzles (ISO 9300:1990)
EN ISO 9360-1-2000 麻醉和呼吸设备 用于加湿人的呼吸气体的热湿交换器(HMEs) 第1部分:与250ml最小潮量一起使用的热湿交换器 Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000)
EN ISO 9360-2-2002 麻醉和呼吸设备 用于加湿人的呼吸气体的热湿交换器(HMEs) 第2部分:最小落差容量为250ml的气管造口病人用 Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001)
EN ISO 9692-3-2001 焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊  Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000)
ENV 12290-1996 高级工艺业陶瓷 惰性气体环境下陶瓷合成物的高温机械特性 压缩特性的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
ENV 1259-1-1994 单个气体燃烧器架空辐射管加热器和非家用气体架空光源加热器 第1部分:为建立合理利用能量的要求和试验方 Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters; part 1: requirements and test methods for establishing the rational use of energy; radiometric method A
ENV 1259-2-1996 单个气体燃烧器架空辐射管加热器和非家用气体架空光源加热器 第2部分:为建立合理利用能量的要求和试验方 Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 2: Requirements and test methods for establishing the rational use of energy - Radiometric method B
ENV 1259-3-1996 单个气体燃烧器架空辐射管加热器和非家用气体架空光源加热器 第3部分:为建立合理利用能量的要求和试验方 Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 3: Requirements and test methods for establishing the rational use of energy - Radiometric method C
ENV 12788-1998 高级工艺陶瓷 惰性气体中陶瓷合成物的高温机械性能 抗弯强度测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
ENV 13235-1998 高级工艺陶瓷 陶瓷合成物 惰性气体中陶瓷合成物的高温机械性能 蠕变性测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour
ENV 14459-2002 电子设备用于煤气灶和气体燃烧设备的危险分析和建设的方法 Method of risk analysis and recommendations for the use of electronics in systems for control of gas burners and gas burning appliances
ENV 1892-1996 先进技术陶瓷 在高温惰性气体下陶瓷合成材料的机械性能 抗拉伸性能的测定 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
ENV 1894-1996 先进技术陶瓷 惰性气体中高温下陶瓷合成材料的机械性能 通过对切口样品压缩加载测定剪切强度 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
ENV 737-6-2003 医疗气体管道系统 第6部分:压缩医疗气体和真空用终端部件用探针的尺寸 Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum
HD 22.13 S1-1996+A1-2000 额定电压450/750V及以下的橡胶绝缘电缆 第13部分:烟雾和腐蚀性气体低排放的绝缘和交联聚合物单芯和多芯软 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases
HD 22.9 S2-1995+A1-1999 额定电压450/750V及以下的橡胶绝缘电缆 第9部分:烟雾和腐蚀性气体低排放的固定配线用单芯非铠装电缆 Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases
prEN 12094-4-2001 固定式消防系统 气体灭火系统的部件 第4部分:对高压容器阀组件及其驱动器的要求及试验方法 Fixed fire fighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for high pressure container valve assemblies and their actuators
prEN 12411-1-1996 工厂环境 直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第1部分:一般要求和试验方法 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
prEN 12411-2-1996 工厂环境 直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第2部分:用于测量极限值范围内浓度的设 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the range of limit values
prEN 12411-3-1996 工作场所的气体 直接探测有毒气体和蒸气直接测量其浓度用的电气仪表 第3部分:用于测量远大于极限值的 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of polluting gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values
prEN 12411-4-1997 工作场所的气体 工厂环境 直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第4部分:选择、安装、 Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
prEN 13096-2003 可移动气瓶 向容器中充气的条件 单成分气体 Transportable gas cylinders - Conditions for filling gases into receptables - Single component gases
prEN 13099-2003 可移动气瓶 向容器中充入气体混合物的条件 Transportable gas cylinders - Conditions for filling gas mixtures into receptacles
prEN 13528-3-2003 环境空气质量 测定气体和蒸气浓度的扩散取样器 要求和试验方法 第3部分:选择、使用和维修指南 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
prEN 13631-16-2002 民用炸药 烈性炸药 第16部分:有毒气体的探测和测量 Exlosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases
prEN 14208-2003 可运输气瓶 气体运输用容积达3000升的焊接气罐规范 设计和结构 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
prEN 14291-2001 气体装置泄漏检测用起泡液 Foam producing solutions for leak detection on gas installation
prEN 14387-2003 呼吸保护装置 气体过滤器和组合过滤器 要求、试验和标志 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking / Note: Intended as replacement for EN 141 (2000-02), EN 371 (1992-03), EN 372 (1992-03).
prEN 14412-2002 室内空气质量 气体和蒸气浓度的测定用扩散取样器 选择、使用和维护的指南 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance
prEN 1555-6-1995 供给气体燃料用塑料管道系统 聚已烯(PE) 第6部分:推荐的安装实践 Plastics piping systems for gaseous fuels supply - Polyethylene (PE) - Part 6: Recommended practice for installation
prEN 203-1-2002 气体加热供膳设备 第1部分:安全要求 Gas heated catering equipment - Part 1: safety requirements
prEN 203-3-1996 气体加热供膳设备 第3部分:适应性目的 Gas-heated catering equipment - Part 3: Fitness for purpose
prEN 2445-1998 航空航天系列 气体熔化钢FE-PL8201 (41NiCrMo2) 调质的 锻件 D<(Index)e> 45 mm - 900 MP Aerospace series - Steel FE-PL8201 (41NiCrMo2) air melted - Hardened and tempered - Forgings - D<(Index)e> 45 mm - 900 MPa R<(Index)m> 1100 MPa
prEN 2469-1998 航空航天系列 气体熔化钢FE-PA3901 (X1CrNi18-10) 软化的 钢丝 0,4 D 12,5 m Aerospace series - Steel FE-PA3901 (X1CrNi18-10) air melted - Softened - Wires - 0,4 D 12,5 mm - 450 MPa R<(Index)m> 650 MPa
prEN 2475-1998 航空航天系列 气体熔化钢FE-PL2106 (30CrNiMo8) 调质的 机械加工用棒材 D<(Index)e> 100 m Aerospace series - Steel FE-PL2106 (30CrNiMo8) air melted - Hardened and tempered - Bar for machining - D<(Index)e> 100 mm - 1100 MPa R<(Index)m> 1300 MPa
prEN 2538-1999 航空航天系列 经溶液处理和淀积处理气体熔化钢 FE-PM3801 (X5CrNiCu17-4) 薄板材和带材 a 6 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) air melted, solution treated and precipitation treated - Sheet and strip a 6 mm, Rm≥ 1310 MPa
prEN 2539-1999 航空航天系列 经溶液处理和淀积处理气体熔化钢 FE-PM3801 (X5CrNiCu17-4) 棒材a or D 200 mm Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) air melted, solution treated and precipitation treated - Bar a or D 200 mm, Rm≥ 965 MPa
prEN 2540-1997 航空航天系列 经溶液处理和淀积处理气体熔化钢 FE-PM3902 (X7CrNiCu17-7) 薄板材和带材 a 6 Aerospace series - Steel FE-PM3902 (X7CrNiAl17-7) air melted, solution treated and precipitation hardened - Sheet and strip - a 6 mm, 1240 MPa R<(Index)m> 1450 MPa
prEN 332-1990 压力不超过PN 0,2 和压力为DN 15 至DN 50间的家用气体装置用封闭底人工操纵金属锥形旋塞关闭阀 Manually operated metallic taper plug shut-off valves with closed bottom for domestic gas installations for pressures up to PN 0,2 and with DN 15 to DN 50
prEN 333-1990 压力不超过PN 4 和压力为DN 15 至DN 50间的家用气体装置用人工操纵金属球关闭阀 Manually operated metallic ball shut-off valves for domestic gas installations up to PN 4 and with DN 15 to DN 50
prEN 50039-2001 潜在爆炸性环境用防爆电气设备 固有安全电气系统 i" 爆炸气体用 II 类系统    Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems "i" - Group II systems for gas atmospheres
prEN 50276-1997 牵引蓄电池产生的气体发射 封闭式充电区的通风和安全要求 Gaseous emissions produced by traction batteries - Ventilation and general safety requirements for closed charging areas
prEN 60512-11-14-2003 电子设备用连接器 试验和测量 第11-14部分:气候试验 试验11p:一种流动气体的腐蚀试验 Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test
prEN 61647-1-2001 低压浪涌保护装置元件 第1部分:气体放电管规范 IEC 61647-1, Ed. 1: Components for low-voltage surge protective devices - Part 1: Specification for gas discharge tubes (GDT)
prEN 62271-200-2003 气体绝缘金属外壳的开关设备 第200部分:最高电压达72.5KV及以上的设备 IEC 62271-200, Ed. 1: High-voltage switchgear and controlgear - Part 200: A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
prEN ISO 1183-4-1998 塑料 非泡沫塑料的密度测定方法 第4部分:气体比重瓶法 Plastics - Methods for determining the density of non-cellular plastics - Part 4: Gas pyknometer method (ISO/DIS 1183-4:1998)
prEN ISO 14520-1-2000 气体灭火系统 物理特性和系统设计 第1部分:一般要求 Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements (ISO/FDIS 14520-1:2000)
prEN ISO 14520-10-2000 气体灭火系统 物理特性和系统设计 第10部分:HFC 23灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 10: HFC 23 extinguishant (ISO/FDIS 14520-10:2000)
prEN ISO 14520-11-2000 气体灭火系统 物理特性和系统设计 第11部分:HFC 236fa灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant (ISO/FDIS 14520-11:2000)
prEN ISO 14520-12-2000 气体灭火系统 物理特性和系统设计 第12部分: IG-01灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant (ISO/FDIS 14520-12:2000)
prEN ISO 14520-13-2000 气体灭火系统 物理特性和系统设计 第13部分: IG-100灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant (ISO/FDIS 14520-13:2000)
prEN ISO 14520-14-2000 气体灭火系统 物理特性和系统设计 第14部分: IG-55灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant (ISO/FDIS 14520-14:2000)
prEN ISO 14520-15-2000 气体灭火系统 物理特性和系统设计 第15部分: IG-541灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant (ISO/FDIS 14520-15:2000)
prEN ISO 14520-2-2000 气体灭火系统 物理特性和系统设计 第2部分:CF3I灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CF3I extinguishant (ISO/FDIS 14520-2:2000)
prEN ISO 14520-3-2000 气体灭火系统 物理特性和系统设计 第3部分:FC-2-1-8灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 3: FC-2-1-8 extinguishant (ISO/FDIS 14520-3:2000)
prEN ISO 14520-4-2000 气体灭火系统 物理特性和系统设计 第4部分:FC-3-1-10灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 4: FC-3-1-10 extinguishant (ISO/FDIS 14520-4:2000)
prEN ISO 14520-5-1998 气体灭火系统 物理特性和系统设计 第5部分: FC-5-1-14灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 5: FC-5-1-14 extinguishant (ISO/DIS 14520-5:1998)
prEN ISO 14520-6-2000 气体灭火系统 物理特性和系统设计 第6部分: HCFC混合A的灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 6: HCFC Blend A extinguishant (ISO/FDIS 14520-6:2000)
prEN ISO 14520-7-2000 气体灭火系统 物理特性和系统设计 第7部分:HCFC 124灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 7: HCFC 124 extinguishant (ISO/FDIS 14520-7:2000)
prEN ISO 14520-8-2000 气体灭火系统 物理特性和系统设计 第8部分:HFC 125灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 8: HFC 125 extinguishant (ISO/FDIS 14520-8:2000)
prEN ISO 14520-9-2000 气体灭火系统 物理特性和系统设计 第9部分:HFC 227ea灭火剂 Gaseous fire-extinguishing systems - Physical properties and system design - Part 9: HFC 227ea extinguishant (ISO/FDIS 14520-9:2000)
prEN ISO 15002-1996 医用气体管道系统终端装置用气流量测量装置 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO/DIS 15002:1996)
prEN ISO 9692-1-2003 焊接和相关工艺 接头制备的推荐工艺 第1部分:钢的人工电弧焊、气体保护金属电弧焊、气焊和束焊  Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO/FDIS 9692-1:2003)
编号 中文名称 英文名称

返回