| 编号 | 中文名称 | 英文名称 |
|---|
| JIS B6805-2003
| 焊接、切割及相关工艺用设备的橡胶软管连接
| Rubber hose connection for equipment for welding, cutting and allied processes
|
| JIS B8261 AMD 1-2006
| 液化石油气用软管组件(修改件1)
| Hose assemblies for liquefied petroleum gas (Amendment 1)
|
| JIS B8261-1995
| 液化石油气用软管组件
| Hose assemblies for liquefied petroleum gas
|
| JIS B8360-2000
| 液压用钢丝增强的橡胶软管组件
| Wire reinforced rubber hose assemblies for hydraulic use
|
| JIS B8362-2000
| 液压用织物增强的热塑性塑料软管组件
| Textile reinforced thermoplastic hose assemblies for hydraulic use
|
| JIS B8363-2000
| 液压软管组件的端部配件及接头
| End fittings and adapters for hydraulic hose assemblies
|
| JIS B8364-2000
| 液压用织物增强的橡胶软管组件
| Textile reinforced rubber hose assemblies for hydraulic use
|
| JIS B9119-1989
| 喷雾器用软管联接器和软管接头
| Hose couplings and hose joints for sprayer
|
| JIS D2601-2006
| 汽车零件.使用非石油基制动流体的液压制动系统的制动软管组件
| Automotive parts -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
|
| JIS D2602-1999
| 橡胶.私人汽车和轻型商业车辆用冷却剂软管和管.规范
| Rubber -- Coolant hoses and tubing for use on private cars and light commercial vehicles -- Specification
|
| JIS D2606-1999
| 汽车零件.空气制动橡胶软管和软管组件
| Automotive parts -- Air brake rubber hose and hose assemblies
|
| JIS D2607-1999
| 汽车部件.真空制动橡胶软管
| Automotive parts -- Vacuum brake rubber hose
|
| JIS D3621-1982
| 汽车用软管夹
| Hose clamps for automobiles
|
| JIS F7150-1999
| 小艇.非耐火性燃油软管
| Small craft -- Non-fire-resistant fuel hoses
|
| JIS F7151-1999
| 小艇.耐高温燃油软管
| Small craft -- Fire-resistant fuel hoses
|
| JIS F7152-2006
| 船用发动机湿排气系统用橡胶和塑料软管.规范
| Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification
|
| JIS F7333-1996
| 造船.铸铁软管阀
| Shipbuilding -- Cast iron hose valves
|
| JIS F7334-1996
| 造船.青铜软管阀
| Shipbuilding -- Bronze hose valves
|
| JIS F7335 AMD 1-2006
| 造船.软管连接件和管件(修改件1)
| Shipbuilding -- Hose connections and fittings (Amendment 1)
|
| JIS F7335-1996
| 造船.软管连接件和管件
| Shipbuilding -- Hose connections and fittings
|
| JIS K6330-1-2003
| 橡胶和塑料软管的测试方法.第1部分:软管和软管组件尺寸的测量方法
| Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions for hoses and hose assemblies
|
| JIS K6330-10-1998
| 橡胶和塑料软管的试验方法.第10部分:通过软管壁对液体传输进行的测定
| Testing methods for rubber and plastics hoses -- Part 10: Determination of transmission of liquids through hose walls
|
| JIS K6330-2-1998
| 橡胶和塑料软管的测试方法.第2部分:液体静力法
| Testing methods for rubber and plastics hoses -- Part 2: Hydrostatic testing
|
| JIS K6330-3-1998
| 橡胶和塑料软管的测试方法.第2部分:抽吸阻力的测定
| Testing methods for rubber and plastics hoses -- Part 3: Determination of suction resistance
|
| JIS K6330-4-2003
| 橡胶和塑料软管的测试方法.第4部分:低于室温的弯曲试验
| Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests
|
| JIS K6330-5-1998
| 橡胶和塑料软管的测试方法.第5部分:电阻的测定
| Testing methods for rubber and plastics hoses -- Part 5: Determination of electrical resistance
|
| JIS K6330-6-1998
| 橡胶和塑料软管的测试方法.第6部分:部件间附着力的测定
| Testing methods for rubber and plastics hoses -- Part 6: Determination of adhesion between components
|
| JIS K6330-7-1998
| 橡胶和塑料软管的测试方法.第7部分:静态条件下对臭氧抗性的评估
| Testing methods for rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions
|
| JIS K6330-8-1998
| 橡胶和塑料软管的测试方法.第8部分:无挠曲的液压脉冲试验
| Testing methods for rubber and plastics hoses -- Part 8: Hydraulic-pressure impulse test without flexing
|
| JIS K6330-9-2003
| 橡胶和塑料软管的测试方法.第9部分:软管和管件的弯曲性能
| Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing
|
| JIS K6331 AMD 1-2006
| 一般用途的供水用的织物增强的橡胶软管.规范（修改件1）
| Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification (Amendment 1)
|
| JIS K6331-1999
| 一般用途的供水用的织物增强的橡胶软管.规范
| Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification
|
| JIS K6332 AMD 1-2006
| 压缩空气用纺织物增强式橡胶软管.规范（修改件1）
| Rubber hose, textile-reinforced, for compressed air -- Specification (Amendment 1)
|
| JIS K6332-1999
| 压缩空气用的织物增强的橡胶软管.规范
| Rubber hose, textile-reinforced, for compressed air -- Specification
|
| JIS K6333 AMD 1-2001
| 气焊设备.焊接、切割和有关加工工艺用橡胶软管(修改件1)
| Gas welding equipment -- Rubber hoses for welding, cutting and allied processes (Amendment 1)
|
| JIS K6333-1999
| 气焊设备.焊接、切割及相关工艺用橡胶软管
| Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
|
| JIS K6335 AMD 1-2006
| 蒸汽用橡胶软管和软管组件.规范（修改件1）
| Rubber hoses and hose assemblies for steam -- Specification (Amendment 1)
|
| JIS K6335-1999
| 蒸汽用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for steam -- Specification
|
| JIS K6338-1999
| 吸水和排水用的橡胶软管.规范
| Rubber Hoses for Water Suction and Discharge -- Specification
|
| JIS K6339-1999
| 农业用喷雾器热塑性塑料软管
| Spray thermoplastic hoses for agricultural use
|
| JIS K6343-2004
| 卸油用橡胶软管
| Rubber hoses for oil discharge
|
| JIS K6346-1999
| 海岸吸油和卸油用的橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies -- On-shore oil suction and discharge -- Specification
|
| JIS K6347-1-2003
| 液化石油气用橡胶软管(LPG软管).第1部分:汽车、一般设备和家用.规范
| Rubber hoses for liquefied petroleum gases (LPGs) -- Part 1: Automobile, General equipment and home application -- Specification
|
| JIS K6347-2-1999
| 液化石油气用橡胶软管(LPG软管).第2部分:松散材料输送设备.规范
| Rubber hoses for liquefied petroleum gases (LPG) -- Part 2: Bulk transfer applications -- Specification
|
| JIS K6347-3-2003
| 液化石油气用橡胶软管.第3部分:分配软管及软管组合件.规范
| Rubber hoses for liquefied petroleum gases (LPGs) -- Part 3: Dispensing hoses and hose assemblies -- Specification
|
| JIS K6348-2006
| 气体用橡胶管
| Rubber tubes for gas
|
| JIS K6349-1-1999
| 液压用钢丝增强橡胶软管.第1部分:橡胶软管和软管组件.线增强液压型.规范
| Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification
|
| JIS K6349-2-1999
| 液压用钢丝增强橡胶软管.第2部分:橡胶软管和软管组件.橡胶包覆的螺旋线增强液压型.规范
| Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification
|
| JIS K6349-3 ERRATUM 1-2000
| 液压系统用钢丝增强橡胶软管.第3部分:钢丝增强橡胶软管(勘误 1)
| Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (Erratum 1)
|
| JIS K6349-3-1999
| 液压用钢丝增强橡胶软管.第3部分:线增强橡胶软管
| Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses
|
| JIS K6351-2006
| 气体用金属线增强橡胶软管和软管配件
| Wire reinforced rubber hoses and hose assemblies for gas
|
| JIS K6375-1999
| 塑料软管和软管组件.液压型织物增强的热塑性塑料.规范
| Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification
|
| JIS K6379-1999
| 塑料软管和软管组件.织物增强的液压型.规范
| Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification
|
| JIS S2145 AMD 1-2006
| 气体用金属挠性软管(修改件1)
| Metallic flexible hoses for gas (Amendment 1)
|
| JIS S2145-1991
| 气体用金属挠性软管
| Metallic flexible hoses for gas
|
| JIS S2146-1991
| 煤气用双头速接橡胶管和聚氯乙烯软管
| Rubber tubes and polyvinyl chloride hoses with both end convenient joints for gas
|
| JIS S2146-1991
| 煤气用双头速接橡胶管和聚氯乙烯软管
| Rubber tubes and polyvinyl chloride hoses with both end convenient joints for gas
|
| JIS S2190-1993
| 橡胶管件的管箍
| Bands for rubber tube
|
| JIS S3022-2003
| 燃油设备用输油橡胶软管
| Oil discharge rubber hoses for oil burning appliances
|
| JIS T3270-2007
| 长期使用的输尿管软管斯滕特固定模
| Ureteral tube stents for long-term use
|
| JIS T5905-1993
| 牙钻手柄.软管连接器
| Dental handpieces -- Hose connectores
|
| JIS T7111-2006
| 医疗气体系统使用的软管组件
| Hose assemblies for use with medical gas systems
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com