5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




德国软管标准(DIN hose standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
DIN 11854-1991 食品工业用管配件.不锈钢制软管.带螺纹的软管接头和软管锥形接头 Food industry fittings; hose unions of stainless steel; threaded hose couplings, conical hose couplings
DIN 12215-1975 玻璃实验仪器.软管连接用玻璃管端.橄榄形和毛细管端 Laboratory glassware; glass tube ends for hose connections, olives, capillary tube ends
DIN 12865-1973 实验室仪器.橡胶管 Laboratory apparatus; rubber tubing
DIN 14312-1985 标称压力为16、压力吸水用消防软管B型铝合金联接器 Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16
DIN 14330-1-1985 S 28 消防软管用标称压力PN16 C型铝合金联轴器 Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 28
DIN 14330-2-1985 S 38 消防软管用标称压力PN16 C型铝合金联轴器 Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 32
DIN 14330-3-1978 急救S形橡胶管C型输液联接器.第3部分:C-S 28型和C-S 32型输液联接器用连接装置 Delivery coupling, type C, for first aid rubber hoses S; bind-apparatus for delivery coupling type C-S 28 and C-S 32
DIN 14332-1986 输送管路的C型铝合联接器.公称压力16 .用于 C42 消防软管 Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42
DIN 14461-5-1984 与干式灭火上升总管道连接的输送阀装置.PN16救火软管阀 Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16
DIN 14462 Berichtigung 1-2007 灭火用引水管.灭火软管系统和引水管道的规划和安装.DIN 14462-2007勘误表 Water conduit for fire extinguishing - Planning and installation of fire hose systems and water conduit for fire extinguishing, Corrigenda to DIN 14462:2007-01
DIN 14463-1-2007 消防灭火用给水系统.遥控注水和泄水装置.第1部分:消防软管的卷取系统 Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 1: For hose reel systems
DIN 14572-2002 排气金属软管用排气金属软管和联轴器 Exhaust gas metal hoses and couplings for exhaust gas metal hoses
DIN 14819-1982 灭火剂用吸收软管.要求.检验方法、处理 Pick up hose for extinguishing agents; requirements, test methods, treatment
DIN 14820-1-2000 消防水龙管桥架.第1部分:木制消防软管桥架 Bridges for fire hoses - Part 1: Bridges for fire hoses of wood
DIN 14827-1-2005 消防设备.输水软管运输用笼筐.第1部分:B、C和D型输水软管运输用笼筐 Fire fighting equipment - Cages for transport of delivery hoses - Part 1: Cages for transport of delivery hoses type B, C and D
DIN 14828-2004 绳索软管架 Rope hose holders
DIN 19658-2-1994 灌溉系统用可卷绕聚乙烯(PE)管道和软管.第2部分:形状固定的织物芯层软管.尺寸和供货技术条件 Polyethylene (PE) coiling pipes and hoses for irrigation systems - Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions
DIN 19658-3-1988 灌溉系统用可盘绕聚乙烯(PE)管和软管.带织物内层的非刚性材料软管.第3部分:尺寸和供货技术条件 Polyethylene (PE) coiling pipes and hoses for use in irrigation systems; hoses of nonrigid material with woven fabric inner layer; dimensions and technical delivery conditions
DIN 20018-1-2003 织物增强软管.第1部分:最大工作压力PN 10/16 Textile-reinforced hoses - Part 1: Maximal working pressure PN 10/16
DIN 20018-2-2003 织物增强软管.第2部分:最大工作压力PN 40 Textile-reinforced hoses - Part 2: Maximal working pressure PN 40
DIN 20018-3-2003 织物增强软管.第3部分:最大工作压力PN 100 Textile-reinforced hoses - Part 3: Maximal working pressure PN 100
DIN 20018-4-2003 织物增强软管.第4部分:试验 Textile-reinforced hoses - Part 4: Testing
DIN 20021-1997 液压系统.带衬里的软管.DIN EN 853至DIN EN 857的补充件 Fluid-systems - Hoses with layer - Completation for DIN EN 853 to DIN EN 857
DIN 20029-1990 软管管接头.1:3 锥度量规 Hose fittings; 1:3 taper gauges
DIN 20030-1992 软管连接件.带柄的直旋塞.尺寸、材料和要求 Hose fittings; straight-way-cock with grip; dimensions, materials, requirements
DIN 20033-1990 软管连接件.带压紧螺母的锥形管嘴 Hose fittings; tapered nozzle with clamping nut
DIN 20035-1990 软管管接头.法兰管嘴.公称压力16 Hose fittings; flange nozzle; nominal pressure 16
DIN 20036-1990 软管管接头.圆螺纹的管接头套管 Hose fittings; coupling nipples with round thread form
DIN 20037-1990 软管管接头.连接套管.尺寸 Hose fittings; connecting nipple; dimensions
DIN 20038-1990 软管管接头.接头管嘴 Hose fittings; coupling nozzles
DIN 20039-1998 软管连接件.软管夹 Hose fittings - Hose clamps
DIN 20040-1990 软管管接头.连接套管阀.公称压力16 Hose fittings; nipple valves; nominal pressure 16
DIN 20066-2002 流体动力系统.软管组件.尺寸、要求 Fluid power systems - Hose assemblies - Dimensions, requirements
DIN 22100-5-1993 地下矿井用合成器材和材料.管、管隔离件和软管.安全要求、检验、标识 Articles and materials from synthetic for use in underground mines; tubes, tube isolations and hoses; safety requirements, testing, marking
DIN 24950-1-1978 第1部分:液压和气动软管组件术语 Oilhydraulic and pneumatic; terms for hose assemblies
DIN 25624-1-2001 有轨机动车部件名称.互通通道.第1部分:橡胶管通道连接 Terms for railway vehicle parts - Intercommunicating gangways - Part 1: Rubber tube gangway connection
DIN 2827-2006 化学制品用不锈钢软管 Hose assemblies of stainless steel for chemical products
DIN 3017-1-1998 涡轮传动软管卡圈.A型 Hose clamps with worm gear drive; shape A
DIN 3017-2-2002 软管卡箍.第2部分:带紧固凸缘的卡箍 Hose clamps - Part 2: Clamps with fastening lugs
DIN 3017-3-2002 软管卡箍.第3部分:螺栓卡箍 Hose clamps - Part 3: Bolt clamps
DIN 3017-4-1998 软管卡圈.第4部分:技术交货条件 Hose clamps - Part 4: Technical delivery conditions
DIN 3017-5-2002 软管卡箍.第5部分:带紧固凸耳的宽带软管卡箍.D型和E型 Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; Types D and E
DIN 3021-1-1999 软管夹件.弹簧板夹件(FBS).第1部分:尺寸、标记、材料和类型 Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types
DIN 3021-2-1999 软管夹子.弹簧带夹子.第2部分:交货技术条件 Hose clamps - Spring band clamp - Part 2: Technical delivery conditions
DIN 3021-3-1999 软管夹子.弹簧带夹子.第3部分:系统: 弹簧带夹子-软管-插口 Hose clamps - Spring band clamp - Part 3: System: Spring band clamp-hose-spigot
DIN 30664-1-1994 不带外罩和配筋的实验室用燃气灶软管.第1部分:安全要求和试验 Hoses for gasfired burners for laboratories, without shroud and armoring - Part 1: Safety requirements and tests
DIN 30693-1980 液化石油气用软管的防断裂安全防护装置 Safety devices against rupture of flexible tubes for LPG
DIN 3238-2001 压缩空气匹配件.爪状匹配件,带安全螺母内部宽度42mm,具有凸或凹软管连接末端的匹配件连接环 Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring
DIN 3285-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
DIN 3291-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
DIN 3383-1-1990 煤气软管组件和连接阀.安全软管组件、带有快速连接装置的安全阀 Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device
DIN 3383-2-1996 燃气软管及连接件.第2部分:刚性连接软管 Hose assemblies and connection valves for gas - Part 2: Hose assemblies for rigid connection
DIN 3383-4-1991 软管组件和连接配件.煤气用安全连接配件和试验室管路用接头 Hose assemblies and connection fittings; safety connection fittings for gas and couplings for laboratory tubing
DIN 3384-2007 燃气用不锈钢软管组件.安全要求、测试和标记 Hose assemblies of stainless steel for gas - Safety requirements, testing, marking
DIN 3489-2001 压缩空气匹配件.爪状匹配件,无安全螺母的42mm内宽,凸形凹形匹配件,软管和封闭连接末端旋转匹配件,连接环 Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
DIN 47632-1-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.保护性连接套管 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes
DIN 47632-2-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内套管 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes
DIN 47632-3-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.导线横截面的配置 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections
DIN 47632-4-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内部结构 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction
DIN 4815-2-1979 液化气用软管.软管组件 Hoses for LPG; hose assemblies
DIN 4815-3-1985 液化气用软管.运输车辆用加气和排空用软管管道 Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles
DIN 4815-4-1987 液化石油气用软管.车辆燃气装置用软管和软管组件 Hoses for LPG; hoses and hose assemblies for fuel gas installations in vehicles
DIN 4815-5-1988 液化气用软管.车辆液化气管道用软管接合器.第5部分:安全要求概念、试验、标记 Hoses for LPG; coupling for LPG hose assemblies in vehicles; concepts safety requirements, tests, marking
DIN 49012-1982 电气装置用导管和管件.用于重机械应力的金属软管.结构形式和要求 Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements
DIN 5065-1987 包装.金属及塑料软管用端口塑料密封物 Packaging; plastic closures for metal and plastic tubes
DIN 6103-2002 包装材料.圆柱形塑料软管.同轴多层管.尺寸、材料 Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials
DIN 65164-1-1997 航空航天.非金属编织软管.第1部分:尺寸、重量 Aerospace - Non metallic braided cable sleevings - Part 1: Dimensions, masses
DIN 65164-2-1997 航空航天.非金属编织软管.第2部分:技术规范 Aerospace - Non metallic braided cable sleevings - Part 2: Technical specification
DIN 65178-6-1987 航空航天.液体管道的构造和设计.软管组件、制造 Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture
DIN 65210-1-1987 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses
DIN 65210-2-1987 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings
DIN 65210-3-1987 航空航天.额定压力最高可达 210 巴的软管组件.第3部分:成套软管组件技术规范 Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies
DIN 65211-1-1987 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses
DIN 65211-2-1987 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings
DIN 65211-3-1987 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:成套软管组件技术规范 Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies
DIN 65212-1988 航空航天.仪表的低压软管.技术规范 Aerospace; instrumentation low pressure hoses; technical specification
DIN 65213-1988 航空航天.公称压力为35巴以下的套管连接用软管.技术规范 Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification
DIN 73379-1-1997 燃油软管.第1部分:尺寸、材料、标记 Fuel hoses - Part 1: Dimensions, material, marking
DIN 73379-2-1997 燃油软管.第2部分:要求和试验 Fuel hoses - Part 2: Requirements and tests
DIN 73411-1-1996 汽车冷却管.软管和元件.第1部分:尺寸、材料、类型 Cooling pipes in motor vehicles - Hoses and compounds - Part 1: Dimensions, materials, types
DIN 73411-2-1996 汽车冷却管.软管和化合物.第2部分:要求和试验 Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing
DIN 74225-1991 液压制动软管组件.制动用软管接头.制动软管夹 Brake hose assemblies; brake hose fittings; brake hose clips
DIN 74286-1988 气压制动系统.双管气压制动系统的软管联结器的密封圈 Air braking systems; packing rings for hose couplings for double line braking systems
DIN 74304-1987 压接管接头.软管接头 Compression coupling; hose coupling
DIN 74310-1-1993 气压制动设备.软管.尺寸、材料、标志 Air braking systems; hoses; dimensions, material, marking
DIN 74310-2-1993 气压制动设备.软管.要求、试验 Air braking systems; hoses; requirements, tests
DIN 74325-1988 气压制动系统.软管连接管.形状和尺寸 Air braking systems; hose nipples; shapes, dimensions
DIN 7591-1981 家用设备的水管配件.公称压力10巴的两端用软管连接的带扁平垫圈的螺纹连接管 Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10
DIN 7714-1975 硬橡胶管 Ebonite pipes
DIN 7715-40-1998 橡胶产品.尺寸公差.软管 Rubber products - Dimmensional tolerances; hoses
DIN 85005-2-1999 船舶和海上技术.技术文献的图形符号.第2部分:管和软管组件.管和软管连接.套管 Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose-joints, penetrations
DIN 8541-2-1987 焊接、切割和相关工艺用软管.燃料气体、氧气和其它不可燃气体用带外保护套的软管 Hoses for welding, cutting and allied processes; hoses with protective cover for use with fuel gas, oxygen and other non-combustible gases
DIN 8541-3-1995 焊接、切割和相关工艺用橡胶软管.第3部分:特殊要求用有涂层和无涂层的氧化橡胶软管.安全要求和检验 Rubber hoses for welding, cutting and allied processes - Part 3: Oxygen rubber hoses with and without coatings for special requirements; safety requirements and testing
DIN 86200-1989 灭火和甲板冲洗设备.软管接头.管件.软管.附件.造船用各类管件产品概要 Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding
DIN 86204-1993 船舶用黄铜制公称压力16的C型整体消防软管接头 Solid fire hose coupling type C, PN 16; made of brass, for use on ships
DIN 86205-1993 船舶用黄铜制公称压力16的B型整体消防软管接头 Solid fire hose coupling type B, PN 16; made of brass for use on ships
DIN 86211-1991 公称压力(PN)16、带C或B型消防软管管接头和带法兰连接的灭火阀 Fire valves for PN 16, with fire hose couplings type C or B and with flange connection
DIN 9462-1987 航空航天.软管组件.测量 Aerospace; hose assemblies; survey
DIN CEN/TS 14421-2007 压接和模锻的软管口和金属环 Hose tail and ferrule for crimping and swaging; German version CEN/TS 14421:2006
DIN EN 10324-2004 钢丝和钢丝制品.软管加筋线 Steel wire and wire products - Hose reinforcement wire; German version EN 10324:2004
DIN EN 1113-1997 盥洗室(PN 10)管件用淋浴喷头软管 Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997
DIN EN 12115 Bb.1-2001 液体或气体化学品用橡胶和热塑软管和软管组件.规范.耐受性 Rubber and thermoplastic hoses and hose assemblies for liquid or gaseous chemicals - Specification - Resistance
DIN EN 12115-1999 液体或气体化合物用橡胶和热塑性软管及软管组件.规范 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:1999
DIN EN 12324-1-1999 灌溉方法.喷灌用绕软管轮系统.第1部分:尺寸系列 Irrigation technic - Reel machine systems - Part 1: Size series; German version EN 12324-1:1998
DIN EN 12375-1998 包装.铝软管.管壁厚度的测定方法 Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998
DIN EN 12377-1998 包装材料.软管材.封闭体的气密性试验方法 Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998
DIN EN 12434-2000 低温容器.低温软管 Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000
DIN EN 1256-2006 气焊设备.焊接、切割和相关工艺设备用软管组件规范 Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes; German version EN 1256:2006
DIN EN 13045-2000 包装.圆柱形塑料软管.尺寸和公差 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2000
DIN EN 13046-2000 包装.圆柱形金属软管.尺寸和公差 Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; German version EN 13046:2000
DIN EN 13047-2000 包装.圆锥形金属软管.尺寸和公差 Packaging - Flexible conical metallic tubes - Dimensions and tolerances; German version EN 13047:2000
DIN EN 13048-2000 包装.铝软管.内部清漆薄膜厚度测量方法 Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000
DIN EN 13180-2002 建筑物通风.通气管结构.软管尺寸和机械要求 Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts; German version EN 13180:2001
DIN EN 1327-1996 气焊机.焊接及相关工艺用热塑软管 Gas welding equipment - Thermoplastic hoses for welding and allied processes; German version EN 1327:1996
DIN EN 13461-2001 包装.圆柱形层压软管.尺寸和公差 Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; German version EN 13461:2001
DIN EN 13482-2002 沥青用橡胶软管及软管组件.规范 Rubber hoses and hose assemblies for asphalt and bitumen - Specification; German version EN 13482:2001
DIN EN 13483-2005 可测量的燃料分配系统用带内部蒸气回收的橡胶和塑料软管和软管组件.规范 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification; German version EN 13483:2005
DIN EN 1360-2005 已测燃料分配系统用橡胶和塑料软管及软管组件.规范 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification; German version EN 1360:2005
DIN EN 1361-2004 航空燃料输送用橡胶软管和软管组件.规范 Rubber hoses and hose assemblies for aviation fuel handling - Specification; German version EN 1361:2004
DIN EN 13765-2003 烃类、溶剂和化学品输送用热塑性多层(非硫化)塑料软管和软管组件.规范 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification; German version EN 13765:2003
DIN EN 13766-2003 液化石油气和液化天然气输送热塑性多层非硫化软管和软管组件.规范 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification; German version EN 13766:2003
DIN EN 138-1994 呼吸防护器.清洁空气.全面罩、半面罩或口罩连接软管装置.要求、测试,标记 Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking; German version EN 138:1994
DIN EN 13905-2003 卫生设备旋塞用低阻力淋浴软管 Low resistance shower hoses for sanitary tapware; German version EN 13905:2003
DIN EN 14420-1-2007 带夹具的软管配件.第1部分:要求、检查、名称与符号和试验 Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing; English version of DIN EN 14420-1:2007-04
DIN EN 14420-2-2005 带夹件的软管配件.第2部分:软管尾部的软管侧面部件 Hose fittings with clamp units - Part 2: Hose side parts of hose tail; German version EN 14420-2:2004
DIN EN 14420-3-2005 带夹件的软管配件.第3部分:栓接或销接夹件 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned; German version EN 14420-3:2004
DIN EN 14420-4-2007 带夹具的软管配件.第4部分:法兰接头 Hose fittings with clamp units - Part 4: Flange connections; English version of DIN EN 14420-4:2007-04
DIN EN 14420-5-2005 带夹件的软管配件.第5部分:螺纹连接 Hose fittings with clamp units - Part 5: Threaded connections; German version EN 14420-5:2004
DIN EN 14420-6-2007 带夹具的软管配件.第6部分:TW油罐车接头 Hose fittings with clamp units - Part 6: TW tank truck couplings (includes Amendment A1:2007); English version of DIN EN 14420-6:2004+A1:2007-04
DIN EN 14420-7-2007 带夹件的软管配件.第7部分:凸轮锁紧接头 Hose fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007); English version of DIN EN 14420-7:2007-04
DIN EN 14420-8-2007 带夹具的软管配件.第8部分:对称半节管接头(吉尔曼系统) Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) (includes Amendment A1:2007); English version of DIN EN 14420-8:2007-04
DIN EN 14422-2005 LPG传送软管用对壳式耦合组件 Clamp type coupling assemblies for LPG transfer hoses; German version EN 14422:2004
DIN EN 14423-2005 额定电压18巴及以下的蒸汽软管用对壳式耦合组件 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar; German version EN 14423:2004
DIN EN 14424-2005 带螺旋箍的软管管件 Hose fittings with screwed ferrules; German version EN 14424:2004
DIN EN 14454-2005 防饮用水回流污染的装置.软管接头防回流装置DN 15至DN 32. A型H系列 Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A; German version EN 14454:2005
DIN EN 14540-2007 灭火软管.固定系统用非渗滤扁平软管 Fire-fighting hoses - Non-percolating layflat hoses for fixed systems; German version EN 14540:2004 + A1:2007
DIN EN 14585-1 Bb.1-2006 压力设备用波纹金属软管组件.第2部分:合格评定程序使用指南 Corrugated metal hose assemblies for pressure applications - Guidance on the use of conformity assessment procedures; English version of DIN EN 14585-1 Supplement 1:2006-04
DIN EN 14585-1-2006 压力设备用波纹金属软管组件.第1部分:要求 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements; German version EN 14585-1:2006
DIN EN 14800-2007 使用气体燃料连接家用器具的波纹状安全金属软管组件 Corrugated safety metal hose assemblies for the connection domestic appliance using gaseous fuels; German version EN 14800:2007
DIN EN 1736-2000 制冷系统和热泵.软管元件、隔振器和膨胀节.要求、设计和安装 Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; German version EN 1736:2000
DIN EN 1761-1999 油罐车输油橡胶软管和软管组件.规范 Rubber hoses and hose assemblies for fuel truck delivery - Specification; German version EN 1761:1999
DIN EN 1762-2004 25巴(2.5MPA)及以下液化石油气、LPG(液相和气相)和天然气用橡胶软管和软管组件.规范 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2003
DIN EN 1763-1-2001 商用汽态丙烷、丁烷及其混合物用橡胶和塑料管、软管和配件.第1部分:橡胶管、塑料管和软管要求 Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000
DIN EN 1763-1-2001 商用汽态丙烷、丁烷及其混合物用橡胶和塑料管、软管和配件.第1部分:橡胶管、塑料管和软管要求 Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000
DIN EN 1765-2005 油的吸放设备用橡胶软管组件.组件规范 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies; German version EN 1765:2004
DIN EN 1947-2007 消防软管.泵和水车用半刚性输水软管和软管组件 Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles; German version EN 1947:2002 + A1:2007
DIN EN 24641-1993 给排水橡胶软管.要求 Rubber hoses for water suction and discharge; specification (ISO 4641:1991); German version EN 24641:1993
DIN EN 26801-1993 橡胶和塑料软管.体积膨胀的测定 Rubber or plastics hoses; determination of volumetric expansion (ISO 6801:1983); German version EN 26801:1993
DIN EN 26802-1993 金属丝增强的橡胶和塑料软管组件.挠曲状态下液压脉冲试验 Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993
DIN EN 269-1994 呼吸防护器.加护罩的电动式新鲜空气软管呼吸器.要求、检验、标记; 德文版本 EN 269:1994 Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking; German version EN 269:1994
DIN EN 27326-1993 橡胶和塑料软管.静态条件下耐臭氧性能的评定 Rubber and plastics hoses; assessment of ozone resistance under static conditions (ISO 7326:1991); German version EN 27326:1993
DIN EN 28029-1993 塑料软管.一般用途的纺织物增强的可折叠水管 Plastics hose; general purpose collapsible water hose, textile reinforced; specification (ISO 8029:1985); German version EN 28029:1993
DIN EN 29168-1994 手持式牙科器械.软管连接件 Dental handpieces - Hose connectors (ISO 9168:1991); German version EN 29168:1994
DIN EN 559-2003 气焊机.焊接、切割和相关工艺用橡胶软管 Gas welding equipment - Rubber hoses for welding, cutting and allied processes; German version EN 559:2003
DIN EN 560-2005 气焊设备.焊接、切割和相关工艺用设备的软管连接 Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes; German version EN 560:2005
DIN EN 60684-3-151-1999 绝缘软管套.第3部分:各类管套的规范.第151页:挤压成型的聚氯乙烯/腈橡胶管套.一般应用 Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998
DIN EN 60684-3-151-1999 绝缘软管套.第3部分:各类管套的规范.第151页:挤压成型的聚氯乙烯/腈橡胶管套.一般应用 Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998
DIN EN 60684-3-212 Berichtigung 1-2007 绝缘软管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006, Corrigenda to DIN EN 60684-3-212 (VDE 0341-3-212):2006-08; CENELEC-Corrigendum November 2006 to EN 60684-3-212:2006
DIN EN 60684-3-212-2006 绝缘软套管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006
DIN EN 60684-3-228-2005 绝缘软套管.第3部分:各种型号软管规范.活页228:阻燃、耐流体、收缩比2:1的热收缩、半硬质聚偏二氟乙烯软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:2004); German version EN 60684-3-228:2004
DIN EN 60684-3-233-2006 绝缘软管衬.第3部分:各类管衬的规范.第233页:阻燃的耐流体的收缩比为2:1的热收缩含氟弹性管套(IEC 60684-3- Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006
DIN EN 60684-3-240 bis 243-2003 绝缘软管.第3部分:各型软管规范.240至243节:热收缩聚四氟乙烯(PTFE)绝缘软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002); German version EN 60684-3-240 to 243:2002
DIN EN 60684-3-271-2005 绝缘软套管.第3部分:各种型号软管规范.活页271:阻燃、耐流体、收缩比2:1的热收缩高弹性软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:2004); German version EN 60684-3-271:2004
DIN EN 60684-3-300-2003 绝缘软管.第3部分:各型软管规范.300节:无涂层玻璃纤维编织软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002
DIN EN 60684-3-320-2003 绝缘软管.第3部分:各型软管规范.320节:轻度浸渍的聚对苯二甲酸乙二醇酯编织物 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated (IEC 60684-3-320:2002); German version EN 60684-3-320:2002
DIN EN 60684-3-343 bis 345-2003 绝缘软管.第3部分:各型软管规范.343至345节:无涂层可扩张乙烯三氟氯乙烯纤维编织软管 Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002
DIN EN 60684-3-400 bis 402-2003 绝缘软管.第3部分:各型软管规范.400至402节:带硅弹性涂层的玻璃纤维软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002
DIN EN 60684-3-403 bis 405-2003 绝缘软管.第3部分:各型软管规范.403至405节:丙烯酸酯玻璃纤维编织软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic coating (IEC 60684-3-403 to 405:2002); German version EN 60684-3-403 to 405:2002
DIN EN 60684-3-406 bis 408-2004 绝缘软管.第3部分:各种型号软管规范.活页406-408:带PVC涂层的玻璃纤维编织软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003
DIN EN 60684-3-420 bis 422-2003 绝缘软管.第3部分:各型软管规范.420至422节:丙烯酸酯聚酯纤维软管 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002
DIN EN 61479-2002 带电作业.绝缘材料的柔性导体封盖物 (线路软管) (IEC 61479:2001 + A1:2002); 德文版本 EN 61479:2001 + A1 Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001 + A1:2002); German version EN 61479:2001 + A1:2002
DIN EN 61770-2007 与总水管连接的电气器具.避免软管组件的反虹吸和失效 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets (IEC 61770:1998 + A1:2004 + A2:2006); German version EN 61770:1999 + Corrigendum December 2005 + A1:2004 + A2:2006
DIN EN 62237-2005 带电作业.液压工具和设备用带配件的绝缘软管 Live working - Insulating hoses with fittings for use with hydraulic tools and equipment (IEC 62237:2003, modified); German version EN 62237:2005
DIN EN 671-1-2001 固定式消防系统.水龙带系统.第1部分:半刚性水龙带的软管卷盘; 德文版本 EN 671-1:2001 Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose; German version EN 671-1:2001
DIN EN 671-2/A1-2004 固定式消防系统.软管系统.第2部分:带吹塑软管的软管系统 Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose; German version EN 671-2:2001/A1:2004
DIN EN 671-3-2000 固定的消防设备.软管系统.第3部分:半钢性软管卷曲机和扁平软管系统维修 Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose; German version EN 671-3:2000 + AC:2000
DIN EN 694-2007 消防软管.固定系统用半刚性软管 Fire-fighting hoses - Semi-rigid hoses for fixed systems; German version EN 694:2001 + AC:2002 + AC:2003 + A1:2007
DIN EN 739-2002 医疗气体用低压软管组件(包括修改件A1:2002); 德文版本 EN 739:1998 + A1:2002 Low-pressure hose assemblies for use with medical gases (includes Amendment A1:2002); German version EN 739:1998 + A1:2002
DIN EN 853-1997 橡胶软管和软管组件.带金属丝编织层的液压软管.规范 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996
DIN EN 854-1997 橡胶软管和软管组件.带织物编织层的液压软管.规范 Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996
DIN EN 855-1997 塑料软管和软管组件.带织物编织层的塑料液压软管.规范 Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996
DIN EN 856-1997 橡胶软管和软管组件.带金属丝螺旋垫层的液压软管.规范 Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996
DIN EN 857-1997 橡胶软管和软管组件.带金属丝编织层的紧凑型液压软管.规范 Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996
DIN EN 908-1999 农林机械.带软管卷筒的喷灌机.安全性 Agricultural and forestry machinery - Reel machines for irrigation - Safety; German Version EN 908:1999
DIN EN ISO 10380-2003 管道系统.波纹状金属软管和软管组件 Pipework - Corrugated metal hose and hose assemblies (ISO 10380:2003); German version EN ISO 10380:2003
DIN EN ISO 10806-2004 管道工程.波纹状金属软管用配件 Pipework - Fittings for corrugated metal hoses (ISO 10806:2003); German version EN ISO 10806:2003
DIN EN ISO 10807-1997 管道工程.爆燃性空气电缆保护用波纹金属软管组件 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996
DIN EN ISO 10960-1996 橡胶和塑料软管.动态耐臭氧性评估 Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994); German version EN ISO 10960:1996
DIN EN ISO 11758-1997 橡胶和塑料软管.氙弧灯曝光.颜色和外观变化 Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995); German version EN ISO 11758:1997
DIN EN ISO 1307-1996 工业通用橡胶和塑料软管.内径和公差、长度公差 (ISO 1307:1992); 德文版本 EN ISO 1307:1995 Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992); German version EN ISO 1307:1995
DIN EN ISO 13628-2-2006 石油天然气工业.海底生产系统设计和操作.第2部分:海底和船用自由软管系统(ISO 13628-2-2006) Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006
DIN EN ISO 1401-2000 农业喷灌用橡胶软管 Rubber hoses for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999
DIN EN ISO 1402-1996 橡胶和塑料软管及软管组件.液压静力试验 Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996
DIN EN ISO 14113-1997 气焊设备.最大设计压力不超过450巴液化气橡胶及塑料软管组件 Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997
DIN EN ISO 15465-2004 管道工程.带绕金属软管和软管配件 Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004); German version EN ISO 15465:2004
DIN EN ISO 15540-2002 船舶和航海技术.软管组件耐燃性.试验方法 Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001
DIN EN ISO 15541-2002 船舶和航海技术.软管组件耐燃性.试验板要求 Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001
DIN EN ISO 1746-2000 橡胶或塑料软管和管道.弯曲试验 Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000
DIN EN ISO 2398-1997 压缩空气用纺织纤维增强橡胶软管.规范 Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995); German version EN ISO 2398:1997
DIN EN ISO 3861-1997 喷砂橡胶软管.规范 Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997
DIN EN ISO 3994-2000 塑料软管.给排含水物质用螺旋热塑塑料增强的热塑塑料软管.规范 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000
DIN EN ISO 4023-1995 蒸汽用橡胶软管.试验方法 (ISO 898-7:1992); 德文版本 EN 20898-7:1995 Rubber hoses for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995
DIN EN ISO 4080-1995 橡胶和塑料软管和软管组件.透气性测定 (ISO 4080:1991); 德文版本 EN ISO 4080:1995 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995
DIN EN ISO 4671-2000 橡胶和塑料软管及软管组件.尺寸测量方法 Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000
DIN EN ISO 4672-1999 橡胶和塑料软管.低于室温的柔性试验 Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999
DIN EN ISO 5771-1996 输送无水氨用橡胶软管和软管组件.规范 Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:1994, including Corr 1:1995); German version EN ISO 5771:1996
DIN EN ISO 5774-2000 压缩空气用织物增强塑料软管.规范 Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); German version EN ISO 5774:2000
DIN EN ISO 6134-2006 饱和蒸汽用橡胶软管和软管组件.规范(ISO 6134-2005).德文版本 EN ISO 6134-2005 Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005); German version EN ISO 6134:2005
DIN EN ISO 6224-1997 带织物加固内衬的橡胶供水软管.规范 Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997
DIN EN ISO 6803-1997 橡胶和塑料软管及软管组件.无弯曲液压压力脉冲试验 Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997
DIN EN ISO 6806-1996 油燃烧器软管和软管组件.规范 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992); German version EN ISO 6806:1995
DIN EN ISO 6807-2004 旋转式钻探和振动装置用橡胶软管和软管组件.规范 Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003); German version EN ISO 6807:2003
DIN EN ISO 6808-2000 给排油用塑料软管及软管组件.规范 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000
DIN EN ISO 6945-2000 橡胶软管.外覆层耐磨性的测定 Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) (including Amendment A1); German version EN ISO 6945:1996 + A1:2000
DIN EN ISO 7233-1995 橡胶和塑料软管和软管组件.吸入阻力测定 (ISO 7233:1991); 德文版本 EN ISO 7233:1995 Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995
DIN EN ISO 7369-2005 管道工程.金属软管和软管组件.词汇 Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004
DIN EN ISO 7662-1996 橡胶和塑料软管.内衬磨损测定 Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996
DIN EN ISO 7751-1997 橡胶和塑料软管及软管组件.试验压力和爆破压力与设计工作压力的比值 (ISO 7751:1991); 德文版本 EN ISO 775 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997
DIN EN ISO 7840-2004 小艇.耐火燃油软管 Small craft - Fire resistant fuel hoses (ISO 7840:2004); German version EN ISO 7840:2004
DIN EN ISO 8028-2000 真空喷漆用橡胶和/或塑料软管组件.规范 Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000
DIN EN ISO 8030-1998 橡胶和塑料软管.易燃烧性试验方法 Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995); German version EN ISO 8030:1997
DIN EN ISO 8031-1997 橡胶和塑料软管及软管组件.电阻测定 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993); German version EN ISO 8031:1997
DIN EN ISO 8032-1999 橡胶和塑料软管组件.结合液压脉冲试验的软管弯曲试验(半Ω 型弯曲试验) Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999
DIN EN ISO 8033-2006 橡胶和塑料软管.元件间附着力的测定(ISO 8033:2006) Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2006); English version of DIN EN ISO 8033:2006-11
DIN EN ISO 8308-1996 橡胶和塑料软管及管系.软管和管壁的透液量测定 Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993); German version EN ISO 8308:1995
DIN EN ISO 8330-2000 橡胶和塑料软管和软管组件.词汇 Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000
DIN EN ISO 8469-2006 小型船舶.非耐火燃料软管 (ISO 8469-2006) Small craft - Non-fire-resistant fuel hoses (ISO 8469:2006); English version of DIN EN ISO 8469:2006-10
DIN EN ISO 8580-1995 橡胶和塑料软管.静定状态下抗紫外线的测定 (ISO 8580:1987); 德文版本 EN ISO 8580:1995 Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995
DIN ISO 10502-1997 航空航天.温度为230℃以下气压为10500KPa时使用的聚四氟乙烯(PTFE)软管.采购规范 Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992)
DIN ISO 12151-2-2004 液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
DIN ISO 12151-3-2004 液压传动和通用连接件.软管接头.第3部分:带ISO 6162法兰末端的软管接头 Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999)
DIN ISO 6772-1996 航空航天.流体系统.液压软管、管道和连接组件的脉冲试验 (ISO 6772:1988) Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988)
DIN ISO 7258-1987 航空航天.航空航天用聚四氟乙烯(PTFE)软管.密度和相对密度的测定方法.与ISO7258, 1984相同 Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984
DIN V 65900-13-1998 航空航天系列.液体和气体用的柔性软管和软管组件的设计及制造.安装 Aerospace series - Design and construction of flexible hoses and hose assemblies for fluids in liquid and gaseous condition - Installation (AECMA Technical Report TR 2675:1996 + Corrigendum 1997)
编号中文名称英文名称

返回