| 编号 |
中文名称 |
英文名称 |
| IEC 60151-13-1966
|
电子管电性能的测量 第13部分:高真空电子管热阴极发射电流的测量方法
|
Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves
|
| IEC 60151-23-1970
|
电子管电性能的测量 第23部分:真空脉冲调制管的测量方法
|
Measurements of the electrical properties of electronic tubes. Part 23 : Methods of measurement of vacuum pulse modulator tubes and valves
|
| IEC 60312-2007
|
家用真空吸尘器.性能测试方法
|
Vacuum cleaners for household use - Methods of measuring the performance
|
| IEC 60335-2-100-2002
|
家用和类似电器的安全.第2-100部分:手持式电动真空花园用鼓风机和真空鼓风机的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
|
| IEC 60335-2-2 AMD 1-2004
|
家用和类似用途电器的安全.第2-2部分:真空吸尘器和吸水清洁设备的特殊要求.修改件1
|
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances; Amendment 1
|
| IEC 60335-2-2 AMD 2-2006
|
家用和类似电器.安全.第2-2部分:真空吸尘器和吸水式吸尘器的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
|
| IEC 60335-2-2 Edition 5.1-2004
|
家用和类似用途电器的安全.第2-2部分:真空吸尘器和吸水清洁电器的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
|
| IEC 60335-2-2 Edition 5.2-2006
|
家用和类似用途电器的安全.第2-2部分:真空吸尘器和吸水清洁电器的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
|
| IEC 60335-2-2-2003
|
家用和类似用途电器的安全.第2-2部分:真空吸尘器和吸水式清洁电器的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
|
| IEC 60335-2-69 AMD 1-2005
|
家用和类似用途电器.安全.第2-69部分:工业和商用带电动刷的湿式和干式真空吸尘器的特殊要求.修改件1
|
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use; Amendment 1
|
| IEC 60335-2-69 Edition 3.1-2005
|
家用和类似用途电器的安全.第2-69部分:工业和商用带电动刷的湿式和干式真空吸尘器的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
|
| IEC 60704-2-1-2000
|
家用和类似用途电气设备.测定空气噪声的试验规程.第2-1部分:真空吸尘器的特殊要求
|
Household and similar electrical applicances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners
|
| ISO 10079-3-1999
|
医疗吸引设备 第3部分:真空或用压力驱动吸引设备
|
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source
|
| ISO 10086-2-2004
|
煤.选煤用絮凝剂评定方法.第2部分:旋转式真空过滤系统中用作助滤剂的絮凝剂
|
Coal - Methods for evaluating flocculants for use in coal preparation - Part 2: Flocculants as filter aids in rotary vacuum filtration systems
|
| ISO 11424-1996
|
内燃机的空气和真空系统用橡胶软管及其管件 规范
|
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
|
| ISO 13710-2004
|
石油、石油化学和天然气工业.往复式变容真空泵
|
Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
|
| ISO 15364-2000
|
船舶与海上技术 散货船真空/压力阀
|
Ships and marine technology - Pressure/vacuum valves for cargo tanks
|
| ISO 15749-3-2004
|
船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道
|
Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems
|
| ISO 1607-1-1993
|
容积真空泵 性能测量方法 第1部分:体积流速(抽速)的测量
|
Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
|
| ISO 1607-2-1989
|
容积真空泵 性能测量方法 第2部分:极限压力的测量
|
Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure
|
| ISO 1608-1-1993
|
蒸气真空泵 性能特性的测量 第1部分:体积流速(抽速)的测量
|
Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
|
| ISO 1608-2-1989
|
蒸气真空泵 性能特性的测量 第2部分:临界前级压力的测量
|
Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure
|
| ISO 1609-1986
|
真空技术 法兰尺寸
|
Vacuum technology; Flange dimensions
|
| ISO 16330-2003
|
往复式变容真空泵和泵装置.技术要求
|
Reciprocating positive displacement pumps and pump units - Technical requirements
|
| ISO 1741-1980
|
葡萄糖 干燥后质量损失的测定 真空烘箱法
|
Dextrose; Determination of loss in mass on drying; Vacuum oven method
|
| ISO 1742-1980
|
葡萄糖浆 固体物质的测定 真空烘箱法
|
Glucose syrups; Determination of dry matter; Vacuum oven method
|
| ISO 20421-1 Technical Corrigendum 1-2007
|
低温容器.大型可运输真空隔热容器.第1部分:设计、制作、检验和测试.技术勘误1
|
Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing; Technical Corrigendum 1
|
| ISO 20421-1-2006
|
低温容器.大型可运输真空隔热容器.第1部分:设计、制作、检测和试验
|
Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing
|
| ISO 20421-2-2005
|
低温容器.大型可运输真空隔热容器.第2部分:操作要求
|
Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements
|
| ISO 21009-2-2006
|
低温容器.静压真空绝缘容器.第2部分:工作要求
|
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements
|
| ISO 21029-1-2004
|
低温容器.不超过1000升容量的可运输真空绝缘容器.第1部分:设计、制造、检验和试验
|
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests
|
| ISO 21029-2-2004
|
低温容器.不超过1000升容量的可运输真空绝缘容器.第2部分:操作要求
|
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements
|
| ISO 21358-2007
|
真空技术.直角阀.气动执行器的尺寸和接口
|
Vacuum technology - Right-angle valve - Dimensions and interfaces for pneumatic actuator
|
| ISO 21360-2007
|
真空技术.测量真空泵性能的标准方法.一般描述
|
Vacuum technology - Standard methods for measuring vacuum-pump performance - General description
|
| ISO 2151-2004
|
声学.压缩机和真空泵的噪声试验规范.工程方法(2级)
|
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)
|
| ISO 2861-1-1974
|
真空技术 快卸连接 尺寸 第1部分:夹紧型
|
Vacuum technology; Quick-release couplings; Dimensions; Part I : Clamped type
|
| ISO 2861-2-1980
|
真空技术 快卸连接 尺寸 第2部分:拧紧型
|
Vacuum technology; Quick release couplings; Dimensions; Part 2 : Screwed type
|
| ISO 3529-1-1981
|
真空技术 词汇 第1部分:一般术语 三种语言版
|
Vacuum technology; Vocabulary; Part 1 : General terms Trilingual edition
|
| ISO 3529-2-1981
|
真空技术 词汇 第2部分:真空泵和有关术语 三种语言版
|
Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition
|
| ISO 3529-3-1981
|
真空技术.词汇.第3部分:真空计.三种语言版
|
Vacuum technology; Vocabulary; Part 3 : Vacuum gauges Trilingual edition
|
| ISO 3530-1979
|
真空技术 质谱仪型检漏仪校准
|
Vacuum technology; Mass-spectrometer-type leak-detector calibration
|
| ISO 3669-1986
|
真空技术.超高真空法兰.尺寸
|
Vacuum technology; Bakable flanges; Dimensions
|
| ISO 5302-2003
|
真空技术.涡轮分子泵.性能特征的测量
|
Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics
|
| ISO 7233-2006
|
橡胶和塑料软管和软管组件.耐真空性能测定
|
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
|
| ISO 7396-1-2007
|
医用气体管道系统.第1部分:压缩的医用气体和真空用管道系统
|
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
|
| ISO 8028-1999
|
真空喷涂漆用橡胶和/或塑料软管和软管组件 规范
|
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification
|
| ISO 9100-1-2005
|
玻璃容器.真空凸缘瓶口.第1部分:总则
|
Glass containers - Vacuum lug finishes - Part 1: General
|
| ISO 9100-10-2005
|
玻璃容器.真空凸缘瓶口.第10部分:普通规格77
|
Glass containers - Vacuum lug finishes - Part 10: 77 regular
|
| ISO 9100-11-2005
|
玻璃容器.真空凸缘瓶口.第11部分:普通规格82
|
Glass containers - Vacuum lug finishes - Part 11: 82 regular
|
| ISO 9100-12-2005
|
玻璃容器.真空凸缘瓶口.第12部分:普通规格89
|
Glass containers - Vacuum lug finishes - Part 12: 89 regular
|
| ISO 9100-13-2005
|
玻璃容器.真空凸缘瓶口.第13部分:普通规格100
|
Glass containers - Vacuum lug finishes - Part 13: 100 regular
|
| ISO 9100-14-2005
|
玻璃容器.真空凸缘瓶口.第14部分:普通规格110
|
Glass containers - Vacuum lug finishes - Part 14: 110 regular
|
| ISO 9100-2-2005
|
玻璃容器.真空凸缘瓶口.第2部分:中型33
|
Glass containers - Vacuum lug finishes - Part 2: 33 medium
|
| ISO 9100-3-2005
|
玻璃容器.真空凸缘瓶口.第3部分:普通规格38
|
Glass containers - Vacuum lug finishes - Part 3: 38 regular
|
| ISO 9100-4-2005
|
玻璃容器.真空凸缘瓶口.第4部分:中型38
|
Glass containers - Vacuum lug finishes - Part 4: 38 medium
|
| ISO 9100-5-2005
|
玻璃容器.真空凸缘瓶口.第5部分:普通规格43和48
|
Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular
|
| ISO 9100-6-2005
|
玻璃容器.真空凸缘瓶口.第6部分:普通规格53和58
|
Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular
|
| ISO 9100-7-2005
|
玻璃容器.真空凸缘瓶口.第7部分:深度为58
|
Glass containers - Vacuum lug finishes - Part 7: 58 deep
|
| ISO 9100-8-2005
|
玻璃容器.真空凸缘瓶口.第8部分:普通规格63、66和70
|
Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular
|
| ISO 9100-9-2005
|
玻璃容器.真空凸缘瓶口.第9部分:深度为63、66和70
|
Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep
|
| ISO 9170-1-1999
|
医用气体管道系统用终端设备 第1部分:供压缩医用设备和真空用的终端设备
|
Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum
|
| ISO 9803-1-2007
|
真空技术.管道配件的安装尺寸.第1部分:非刀口法兰型
|
Vacuum technology - Mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type
|
| ISO 9803-2-2007
|
真空技术.管道配件的安装尺寸.第2部分:刀口法兰型
|
Vacuum technology - Mounting dimensions of pipeline fittings - Part 2: Knife-edge flange type
|
| ISO/TS 3567-2005
|
真空计.同参考量规直接比较进行校准
|
Vacuum gauges - Calibration by direct comparison with a reference gauge
|
| ISO/TS 3669-2-2007
|
真空技术.超高真空法兰.第2部分:刀口法兰的尺寸
|
Vacuum technology - Bakable flanges - Part 2: Dimensions of knife-edge flanges
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com