| 编号 |
中文名称 |
英文名称 |
| DIN 10236-2001
|
香料和调味品分析.真空炉干燥法测定辣椒和洋葱类及干燥蔬菜质量损失
|
Analysis of spices and condiments - Determination of loss in mass of capsicum and allium species and of dried vegetables by vacuum oven drying
|
| DIN 10304-2-1969
|
葡萄糖浆的水分含量和干物质的测定.真空干燥法
|
Determination of moisture content and dry substance of glucose syrup; vacuum oven method
|
| DIN 10764-2-2007
|
咖啡和咖啡制品的检验.溶解咖啡质量缺失测定.第2部分:真空炉法
|
Analysis of coffee and coffee products - Determination of loss in mass of soluble coffee - Part 2: Method using vacuum oven (routine method)
|
| DIN 12491-1998
|
实验室玻璃器具.真空干燥器
|
Laboratory glassware - Vacuum desiccators
|
| DIN 12492-1998
|
实验室玻璃仪器.带有真空套管隔离层的仪器
|
Laboratory glassware - Instruments with vacuum-jacket insulation
|
| DIN 12545-1977
|
玻璃实验仪器.真空旋塞
|
Laboratory glassware; vacuum stopcocks
|
| DIN 13260-2-2004
|
医用供气系统.第2部分:医用压缩气体和真空终端装置用探测器和气体特定连接点的尺寸和位置
|
Supply systems for medical gases - Part 2: Dimensions and allocation of probes and gas-specific connection points for terminal units for compressed medical gases and vacuum
|
| DIN 14420-2002
|
消防泵.消防离心泵.消防车在安装真空面和压力面组件后的试验要求
|
Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle
|
| DIN 25630-2-2001
|
铁路车辆部件术语.卫生设备.第2部分:真空抽水马桶和洗脸盆
|
Terms for railway vehicle parts - Sanitary installation - Part 2: Vacuum toilet and wash basin
|
| DIN 28400 Bb.1-1982
|
真空技术.术语和定义.字母顺序索引
|
Vacuum technology, terms and definitions; alphabetical index
|
| DIN 28400-1-1990
|
真空技术.术语和定义.通用术语
|
Vacuum technology; terms and definitions; general terms
|
| DIN 28400-2-1980
|
真空技术.真空泵的术语和定义
|
Vacuum technology; terms and definitions, vacuum pumps
|
| DIN 28400-3-1992
|
真空技术.术语和定义.真空计
|
Vacuum technology; terms and definitions; vacuum gauges
|
| DIN 28400-5-1981
|
真空技术.术语和定义.真空干燥和升华干燥
|
Vacuum technology; terms and definitions; vacuum drying and lyophilisation
|
| DIN 28400-6-1980
|
真空技术.表面分析技术的术语和定义
|
Vacuum technology; terms and definitions, surface analysis techniques
|
| DIN 28400-7-1978
|
真空技术.第7部分:真空冶金学术语和定义
|
Vakuum technology; terms and definitions, vacuum metallurgie
|
| DIN 28400-8-1997
|
真空技术.术语定义.第8部分:真空系统.部件和附件
|
Vacuum technology - Terms and definitions - Part 8: Vacuum systems, components and accessories
|
| DIN 28401-1976
|
真空技术.图形符号.综述
|
Vacuum technology; graphical symbols, summary
|
| DIN 28402-1976
|
真空技术.参数、符号、单位、综述
|
Vacuum technology; quantities, symbols, units, summary
|
| DIN 28403-1986
|
真空技术.快速松脱离合器.对壳式联轴节
|
Vacuum technology; quick release couplings; clamped type couplings
|
| DIN 28404-1986
|
真空技术.法兰.尺寸
|
Vacuum technology; flanges; dimensions
|
| DIN 28410-1968
|
真空技术.质谱分压量规.定义、特性、工作条件
|
Vacuum Technology; Mass Spectrometer Partial Pressure Gauges; Definitions, Characteristics, Operating Conditions
|
| DIN 28411-1976
|
真空技术.质谱仪式检漏器的验收规范.术语
|
Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms
|
| DIN 28416-1976
|
真空技术.10(-3)至10(-7)mbar范围内真空计的校准.一般方法:通过连续不断的流动降低压力
|
Vaccum technology; calibration of vacuum gauges within the range of 10<(hoch)-3> to 10<(hoch)-7> mbar, general method: pressure reduction by continuous flow
|
| DIN 28417-1976
|
真空技术.在恒定压力下用容积法测量抽气量
|
Vacuum technology; measurement of throughput by the volumetric method at constant pressure
|
| DIN 28418-1-1976
|
真空技术.通过直接与标准真空规的比较对真空计校准的标准方法.
|
Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge
|
| DIN 28418-2-1978
|
真空技术.用参比测量仪直接比较校准真空计的标准方法.第2部分:电离真空计
|
Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge
|
| DIN 28418-3-1980
|
真空技术.通过与标准真空规的直接比较校准真空计的标准方法.热导真空计
|
Vacuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vacuum gauge, thermal conductivity gauges
|
| DIN 28426-1-1983
|
真空技术.近似真空和中等真空范围用旋转柱塞真空泵、叶片式旋转真空泵和旋转式活塞真空泵验收规范
|
Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum
|
| DIN 28426-2-1976
|
真空技术.中等级真空范围用罗茨真空泵的验收规范
|
Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum
|
| DIN 28427-1983
|
真空技术.流体蒸气压低于1mbar的扩散泵和蒸气喷射真空泵的验收规范
|
Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar
|
| DIN 28428-1978
|
真空技术.涡轮分子泵的验收规则
|
Vacuum technology; acceptance specifications for turbomolecular pumps
|
| DIN 28429-2003
|
真空技术.溅射离子泵验收规范
|
Vacuum technology - Acceptance specifications for getter ion pumps
|
| DIN 28430-1984
|
真空技术.以蒸汽作为驱动介质的蒸汽喷射真空泵和蒸汽喷射压缩机的测量规则
|
Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid
|
| DIN 28431-1987
|
真空技术.液体环式真空泵的验收规范
|
Vacuum technology; acceptance specifications for liquid ring vacuum pumps
|
| DIN 28432-1996
|
真空技术.膜片真空泵验收规范
|
Vacuum technology - Acceptance specifications for diaphragm vacuum pumps
|
| DIN 44402-14-1971
|
电子管电气性能测试.第14部分:高真空电子管加热阴极的放射电流的测试方法
|
Measurements of electrical properties of electronic tubes; methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves
|
| DIN 44402-16-1972
|
电子管和真空管的电气性能测量.第16部分:乱真电极电流和有害电极电流的测量方法
|
Measurements of the electrical properties of electronic tubes and valves; methods of measurement of spurious and unwanted electrode currents
|
| DIN 44402-7-1973
|
电子管和真空管的电气性能测量.第7部分:咝咝声和交流声的测量方法
|
Measurements of the electrical properties of electronic tubes and valves; methods of measuring hiss and hum
|
| DIN 51935-1993
|
炭素材料试验.用空气作实验气体的真空衰减法测定透气系数.固体材料
|
Testing of carbon materials; determination of the coefficient of permeability by means of the vacuum-decay method with air as experimental gas; solid matters
|
| DIN 58739-1-2002
|
光学加工.光学加工工件夹具.第1部分:真空夹头
|
Production in optical engineering - Workpiece receptions for optics - Part 1: Vacuum chucks
|
| DIN 6618-2-1989
|
地上存储易燃和不易燃水污染液体的带真空基渗漏检测系统双壁立式钢储罐
|
Vertical double-wall steel tanks with vacuum-based leak detection system, for the above ground storage of flammable and non-flammable water polluting liquids
|
| DIN EN 1012-1-1996
|
压缩机和真空泵.安全性要求.第1部分:压缩机
|
Compressors and vacuum pumps, safety requirements - Part 1: Compressors; German version EN 1012-1:1996
|
| DIN EN 1012-2-1996
|
压缩机和真空泵.安全性要求.第2部分:真空泵
|
Compressors and vacuum pumps, safety requirements - Part 2: Vacuum pumps; German version EN 1012-2:1996
|
| DIN EN 1091-1997
|
建筑物外真空排污系统
|
Vacuum sewerage systems outside buildings; German version EN 1091:1996
|
| DIN EN 1123-3-2005
|
废水系统用带插接套的长焊缝焊接热浸镀锌钢管制管道和管件.第3部分:真空排水系统和船上排水系统的尺寸和特
|
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building; German version EN 1123-3:2004
|
| DIN EN 1124-4-2005
|
污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统用元件
|
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2005
|
| DIN EN 12109-1999
|
建筑物内的真空排水系统
|
Vacuum drainage systems inside buildings; German version EN 12109:1999
|
| DIN EN 12294-1999
|
塑料管道系统.热水和冷水系统.真空密封性的检验方法
|
Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum; German version EN 12294:1999
|
| DIN EN 1251-1-2000
|
低温容器.容量不超过1000升的可移动的真空绝缘容器.第1部分:基本要求.德文版本EN 1251-1:2000
|
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000
|
| DIN EN 1251-2 Berichtigung 1-2007
|
低温容器.容积≤1000L的可运输真空隔热容器.第2部分:设计、制造、检验和测试.DIN EN 1251-2-2000 技术勘误
|
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000, Corrigenda to DIN EN 1251-2:2000-03; German version EN 1251-2:2000/AC:2006
|
| DIN EN 1251-2-2000
|
低温容器.容量不超过1000升的可移动的真空绝缘容器.第2部分:设计,制造,检验和试验.德文版本EN1251-2-2000
|
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000
|
| DIN EN 1251-3-2000
|
低温容器.容量不超过1000升的可移动的真空绝缘容器.第3部分:操作要求.德文版本EN1251-3-2000
|
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements; German version EN 1251-3:2000
|
| DIN EN 12546-1 Berichtigung 1-2005
|
与食品接触的材料和物品.家用保温容器.第1部分:真空器皿、保温瓶和保温壶规范
|
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; German version EN 12546-1:2000, Corrigenda to DIN EN 12546-1:2000-09; German version EN 12546-1:2000/AC:2005
|
| DIN EN 12546-1-2000
|
与食品接触的材料和物品.家用保温容器.第1部分:真空器皿、保温瓶和保温壶规范
|
Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1: Specification for vacuum ware, insulated flasks and jugs; German version EN 12546-1:2000
|
| DIN EN 12596-2007
|
沥青和沥青粘合剂.用真空毛细管测定动态粘滞度
|
Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary; German version EN 12596:2007
|
| DIN EN 13160-2-2003
|
检漏系统.第2部分:压力和真空系统
|
Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003
|
| DIN EN 13348-2005
|
铜和铜合金.医用气体或真空用无缝圆形铜管
|
Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum; German version EN 13348:2001 + A1:2005
|
| DIN EN 13458-1-2002
|
冷冻容器.静态真空绝缘容器.第1部分:基本要求; 德文版本 EN 13458-1:2002
|
Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 13458-1:2002
|
| DIN EN 13458-2 Berichtigung 1-2007
|
低温容器.静压真空绝缘容器.第2部分:设计、制造、检验和测试.DIN EN 13458-2-2003技术勘误
|
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002, Corrigenda to DIN EN 13458-2:2003-02; German version EN 13458-2:2002/AC:2006
|
| DIN EN 13458-2-2003
|
低温容器.静压真空绝缘容器.第2部分:设计、制造、检验和测试
|
Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002
|
| DIN EN 13458-3-2005
|
低温容器.静态真空绝热容器.第3部分:操作要求
|
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements; German version EN 13458-3:2003 + A1:2005
|
| DIN EN 13530-1-2002
|
低温容器.大体积可运输的真空绝缘容器.第1部分:基本要求; 德文版本 EN 13530-1:2002
|
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 13530-1:2002
|
| DIN EN 13530-2 Berichtigung 1-2007
|
低温容器.大型可运输真空绝缘容器.第2部分:设计、制造、检验和测试.DIN EN 13530-2-2003技术勘误
|
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002, Corrigenda to DIN EN 13530-2:2003-01; German version EN 13530-2:2002/AC:2006
|
| DIN EN 13530-2-2003
|
低温容器.大容量可运输真空绝缘容器.第2部分:设计、制造、检验和试验
|
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002
|
| DIN EN 13530-2/A1-2004
|
低温容器.大体积、可运输、真空绝缘容器.第2部分:设计、制作、检查和试验
|
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13530-2:2002/A1:2004
|
| DIN EN 13530-3-2005
|
低温容器.大型可运输真空绝缘容器.第3部分:操作要求
|
Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements; German version EN 13530-3:2002 + A1:2005
|
| DIN EN 13604-2002
|
铜和铜合金.电子管、半导体器件和真空设施用高电导率铜制品
|
Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications; German version EN 13604:2002
|
| DIN EN 14091-2003
|
航空航天.航天产品保证.航天材料热真空除气筛选试验
|
Aerospace - Space product assurance - Thermal vacuum outgassing test for the screening of space materials; German and English version EN 14091:2002
|
| DIN EN 14197-1-2003
|
低温容器.静压非真空绝热容器.第1部分:基本要求
|
Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 14197-1:2003
|
| DIN EN 14197-2 Berichtigung 1-2007
|
低温容器.静态非真空绝缘容器.第2部分:设计、制造、检验和测试.DIN EN 14197-2-2006技术勘误
|
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 14197-2:2003 + A1:2006, Corrigenda to DIN EN 14197-2:2006-11; German version EN 14197-2:2003/AC:2006
|
| DIN EN 14197-2-2006
|
低温容器.静压非真空绝热容器.第2部分:设计、生产、检查和试验(包括修改件A1-2006)
|
Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing (includes Amendment A1:2006); English version of DIN EN 14197-2:2006-11
|
| DIN EN 14197-3-2005
|
低温容器.静压非真空绝热容器.第3部分:操作要求
|
Cryogenic vessels - Static non vacuum insulated vessels - Part 3: Operational requirements; German version EN 14197-3:2004 + A1:2005
|
| DIN EN 14398-1-2004
|
低温容器.大型可运输的非真空绝缘容器.第1部分:基本要求
|
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 14398-1:2003
|
| DIN EN 14398-2-2004
|
低温容器.大型可运输的非真空绝缘容器.第2部分:设计、制造、检查和试验
|
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 14398-2:2003
|
| DIN EN 14398-2/A1-2007
|
低温容器.大型可运输非真空绝缘容器.第2部分:设计、制造、检查和试验
|
Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; English version of DIN EN 14398-2/A1:2007-02
|
| DIN EN 14398-3-2005
|
低温容器.大型可运输的非真空绝缘容器.第3部分:操作要求
|
Cryogenic vessels - Large transportable non vacuum insulated vessels - Part 3: Operational requirements; German version EN 14398-3:2003 + A1:2005
|
| DIN EN 14595-2005
|
危险物品运输罐.罐的辅助设备.压力和真空通气口
|
Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent; German version EN 14595:2005
|
| DIN EN 3359-2007
|
航空航天系列.FE-PM1503(X3CrNiMoAl13-8-2)型钢.真空感应熔化和自耗电极重熔的软化锻坯.a或D≤300mm
|
Aerospace series - Steel FE-PM1503 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted, softened, forging stock a or D 300 mm; German and English version EN 3359:2007
|
| DIN EN 3475-409-2002
|
航空航天系列.航空用电缆.试验方法.第409部分:真空老化; 德文版本 EN 3475-409:2002
|
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing; German version EN 3475-409:2002
|
| DIN EN 3531-2007
|
航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型钢.真空感应熔炼和真空电弧再熔炼.溶解处理和沉淀处理.薄板材和
|
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1 750 MPa R<(Index)m> 2 000 MPa; German and English version EN 3531:2007
|
| DIN EN 3532-2007
|
航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型钢.真空感应熔炼和真空电弧再熔炼.溶解处理和沉淀处理.厚板材.6m
|
Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm a 40 mm - 1 750 MPa R<(Index)m> 2 000 MPa; German and English version EN 3532:2007
|
| DIN EN 4461-2007
|
航空航天系列.钢 FE-PM1506 (X5CrNiMoAI13-8-2).真空感应熔炼和自耗电极再溶炼的.固溶处理和时效处理的.棒
|
Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1 200 MPa; German and English version EN 4461:2007
|
| DIN EN 4462-2007
|
航空航天系列.钢 FE-PM1506 (X5CrNiMoAI13-8-2).真空感应熔炼和自耗电极再溶炼的.固溶处理和时效处理的.棒
|
Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4662:2007
|
| DIN EN 4463-2007
|
航空航天系列.钢 FE-PM1506 (X5CrNiMoAI13-8-2).真空感应熔炼和自耗电极再溶炼的.固溶处理和时效处理的.棒
|
Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4463:2007
|
| DIN EN 4464-2007
|
航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件.a
|
Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4464:2007
|
| DIN EN 4465-2007
|
航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件.a
|
Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4465:2007
|
| DIN EN 4466-2007
|
航空航天系列.FE-PM1506(X5CrNiMoAI13-8-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件.a
|
Aerospace series - Steel FE-PM1506 (X5CrNiMoAI13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4466:2007
|
| DIN EN 4467-2007
|
航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.棒材.
|
Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4467:2007
|
| DIN EN 4468-2007
|
航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.棒材.
|
Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Bar - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4468:2007
|
| DIN EN 4469-2007
|
航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.棒材.
|
Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Bar - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4469:2007
|
| DIN EN 4470-2007
|
航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀处理.锻件.
|
Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1200 MPa; German and English version EN 4470:2007
|
| DIN EN 4471-2007
|
航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.锻件.
|
Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1300 MPa; German and English version EN 4471:2007
|
| DIN EN 4472-2007
|
航空航天系列.FE-PM1505(X1CrNiMoAITi12-9-2)型钢.真空感应熔炼和自耗电极再熔炼.溶解处理和沉淀硬化.锻件.
|
Aerospace series - Steel FE-PM1505 (X1CrNiMoAITi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation hardened - Forgings - a or D 150 mm - R<(Index)m> 1400 MPa; German and English version EN 4472:2007
|
| DIN EN 60312-2005
|
家用真空吸尘器.性能测量方法
|
Vacuum cleaners for household use - Methods of measuring the performance (IEC 60312:1998 + A1:2000 + A2:2004); German version EN 60312:1998 + A1:2000 + A2:2004
|
| DIN EN 60335-2-2-2007
|
家用和类似用途电器.安全性.第2-2部分:真空吸尘器和吸水清洁器的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2:2002, modified + A1:2004 + A2:2006, modified); German version EN 60335-2-2:2003 + A1:2004 + A2:2006
|
| DIN EN 60335-2-69-2004
|
家用和类似用途电器的安全.第2-69部分:工业和商用带电动刷的湿式和干式真空吸尘器的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002, modified); German version EN 60335-2-69:2003
|
| DIN EN 60335-2-69/A1-2005
|
家用和类似用途电器的安全.第2-69部分:工业和商业用湿式和干式真空吸尘器(包括电动刷)的特殊要求
|
Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002/A1:2004); German version EN 60335-2-69:2003/A1:2004
|
| DIN EN 60704-2-1-2001
|
家用和类似用途电气设备.气载噪测试规程.第2-1部分:真空吸尘器的特殊要求
|
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners (IEC 60704-2-1:2000); German version EN 60704-2-1:2001
|
| DIN EN 737-1-1998
|
医疗气体管道系统.第1部分:医疗压缩气体和真空的管端装置
|
Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum; German version EN 737-1:1998
|
| DIN EN 993-17-1999
|
密实成型耐火制品的试验方法.第17部分:用水银真空排出法测定颗粒材料的散密度
|
Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
|
| DIN EN 993-18-2002
|
密封成形耐火制品试验方法.第18部分:用真空湿法测定颗粒物体积密度
|
Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
|
| DIN EN ISO 10079-3-2000
|
医用吸引设备.第3部分:真空或用压力驱动的吸引设备
|
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999); German version EN ISO 10079-3:1999
|
| DIN EN ISO 11140-3-2007
|
卫生保健产品的灭菌.化学指示剂.第3部分:真空灭菌锅残余空气蒸汽渗透试验用的2级指示剂体系
|
Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007); German version EN ISO 11140-3:2007
|
| DIN EN ISO 11140-4-2007
|
卫生保健产品的灭菌.化学指示剂.第4部分:蒸汽渗透检测用可代替真空灭菌锅残余空气试验的指示剂
|
Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007); German version EN ISO 11140-4:2007
|
| DIN EN ISO 13710-2005
|
石油、石油化学和天然气工业.往复式变容真空泵
|
Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004); English version EN ISO 13710:2004
|
| DIN EN ISO 15364-2002
|
船舶和航海技术.油轮用压力/真空阀 (ISO 15364:2000); 德文版本 EN ISO 15364:2001
|
Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001
|
| DIN EN ISO 15749-3-2004
|
船舶和海上技术.船舶和海上建筑物排水系统.第3部分:真空系统用卫生排水和排水管道
|
Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004); German version EN ISO 15749-3:2004
|
| DIN EN ISO 16330-2004
|
往复运动变容真空泵和泵装置.技术要求
|
Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003); German version EN ISO 16330:2003
|
| DIN EN ISO 1741-1994
|
葡萄糖.干燥后质量损失的测定.真空烘箱法 (ISO 1741:1980); 德文版本 EN ISO 1741:1994
|
Dextrose - Determination of loss in mass on drying - Vacuum oven method (ISO 1741:1980); German version EN ISO 1741:1994
|
| DIN EN ISO 2151-2004
|
声学.压缩机和真空泵用噪音试验规程.工程法(2级)
|
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004); German version EN ISO 2151:2004
|
| DIN EN ISO 7396-1-2007
|
医用气体管道系统.第1部分:压缩医疗气体和真空用管道系统
|
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2007); German version EN ISO 7396-1:2007
|
| DIN EN ISO 8028-2000
|
真空喷漆用橡胶和/或塑料软管组件.规范
|
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000
|
| DIN EN ISO 9100-1-2005
|
玻璃容器.真空凸缘瓶口.第1部分:总则
|
Glass containers - Vacuum lug finishes - Part 1: General (ISO 9100-1:2005); German version EN ISO 9100-1:2005
|
| DIN EN ISO 9100-10-2005
|
玻璃容器.真空凸缘瓶口.第10部分:普通规格77
|
Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005); German version EN ISO 9100-10:2005
|
| DIN EN ISO 9100-11-2005
|
玻璃容器.真空凸缘瓶口.第11部分:普通规格82
|
Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005); German version EN ISO 9100-11:2005
|
| DIN EN ISO 9100-12-2005
|
玻璃容器.真空凸缘瓶口.第12部分:普通规格89
|
Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005); German version EN ISO 9100-12:2005
|
| DIN EN ISO 9100-13-2005
|
玻璃容器.真空凸缘瓶口.第13部分:普通规格100
|
Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005); German version EN ISO 9100-13:2005
|
| DIN EN ISO 9100-14-2005
|
玻璃容器.真空凸缘瓶口.第14部分:普通规格110
|
Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005); German version EN ISO 9100-14:2005
|
| DIN EN ISO 9100-2-2006
|
玻璃容器.真空凸缘瓶口.第2部分:中型33(ISO 9100-2-2005).德文版本 EN ISO 9100-2-2005
|
Glass containers - Vacuum lug finishes - Part 2: 33 medium (ISO 9100-2:2005); German version EN ISO 9100-2:2005
|
| DIN EN ISO 9100-3-2006
|
玻璃容器.真空凸缘瓶口.第3部分:普通规格38
|
Glass containers - Vacuum lug finishes - Part 3: 38 regular (ISO 9100-3:2005); German version EN ISO 9100-3:2005
|
| DIN EN ISO 9100-4-2006
|
玻璃容器.真空凸缘瓶口.第4部分:中型38(ISO 9100-4-2005).德文版本 EN ISO 9100-4-2005
|
Glass containers - Vacuum lug finishes - Part 4: 38 medium (ISO 9100-4:2005); German version EN ISO 9100-4:2005
|
| DIN EN ISO 9100-5-2005
|
玻璃容器.真空凸缘瓶口.第5部分:普通规格43和48
|
Glass containers - Vacuum lug finishes - Part 5 :43 and 48 regular (ISO 9100-5:2005); German version EN ISO 9100-5:2005
|
| DIN EN ISO 9100-6-2005
|
玻璃容器.真空凸缘瓶口.第6部分:普通规格53和58
|
Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular (ISO 9100-6:2005); German version EN ISO 9100-6:2005
|
| DIN EN ISO 9100-7-2005
|
玻璃容器.真空凸缘瓶口.第7部分:深度为58
|
Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005); German version EN ISO 9100-7:2005
|
| DIN EN ISO 9100-8-2005
|
玻璃容器.真空凸缘瓶口.第8部分:普通规格63、66和70
|
Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular (ISO 9100-8:2005); German version EN ISO 9100-8:2005
|
| DIN EN ISO 9100-9-2005
|
玻璃容器.真空凸缘瓶口.第9部分:深度为63、66和70
|
Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005); German version EN ISO 9100-9:2005
|
| DIN V ENV 737-6-2003
|
医用气体管道系统.第6部分:医用压缩气体和真空终端装置用探针的尺寸和定位
|
Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum; German version ENV 737-6:2003
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com