编号 |
中文名称 |
英文名称 |
JIS A8905-1993
|
施工机械.维修刀具.维护和调节用手工工具
|
Construction machinery -- Service tools -- Hand tools for maintenance and adjustment works
|
JIS B4003-1999
|
机床工具.刀柄用自动夹紧锥度
|
Machine tools -- Self-holding tapers for tool shanks
|
JIS B4120-1998
|
切削工具转位刀片.标识
|
Indexable inserts for cutting tools -- Designation
|
JIS B4134-1994
|
单刃金刚石砂轮修整工具
|
Single point diamond dressing tools
|
JIS B4140-2006
|
金刚石/CBN产品.金刚石或CBN电镀工具
|
Diamond/CBN products -- Diamond or CBN electroplated tools
|
JIS B5007-1998
|
冲压工具.导柱及导衬
|
Tools for pressing -- Guide posts and guide bushes
|
JIS B5009-1998
|
冲压工具.带圆柱形头和缩减柄的冲头
|
Tools for pressing -- Punches with cylindrical head and reduced shank
|
JIS B5012-1998
|
冲压工具.盘簧
|
Tools for pressing -- Coiled helical spring
|
JIS B6336-9-2002
|
多工序自动数控机床(加工中心)的试验条件.第9部分:工具更换和底板更换操作时间的评估
|
Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change
|
JIS B7762-1-2006
|
便携式手提动力工具.手柄振动的测量.第1部分:总则
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 1: General
|
JIS B7762-10-2006
|
手持便携式电动工具.手柄部位振动的测量.第10部分:步冲轮廓机和剪切机械
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 10: Nibblers and shears
|
JIS B7762-11-2006
|
便携式手提动力工具.手柄振动测量.第11部分:接合件传动工具
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 11: Fastener driving tools
|
JIS B7762-12-2006
|
便携式手提动力工具.手柄振动测量.第12部分:受往复作用的锯和锉和受摆动或旋转作用的锯
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action
|
JIS B7762-13-2006
|
手持便携式动力工具.手柄振动力的测量.第13部分:模具打磨机
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 13: Die grinders
|
JIS B7762-14-2006
|
便携式手提动力工具.手柄机械振动测量.第14部分:石料加工机和针式标定器
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 14: Stone-working tools and needle scalers
|
JIS B7762-2-2006
|
手持便携式动力工具.手柄振动测量方法.第2部分:铲和铆钉机
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 2: Chipping hammers and riveting hammers
|
JIS B7762-3-2006
|
便携式手持动力工具.手柄处振动测量.第3部分:岩石钻头和旋转锤
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 3: Rock drills and rotary hammers
|
JIS B7762-4-2006
|
便携式手提动力工具.手柄振动测量.第4部分:磨床
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 4: Grinders
|
JIS B7762-5-2006
|
便携式手提动力工具.手柄振动测量.第5部分:施工用路面轧碎机和锤.
|
Hand-held portable power tools -- Measurement of vibration at the handle -- Part 5: Pavement breakers and hammers for construction work
|
JIS B7762-6-2006
|
便携式手提动力工具.手柄振动的测量.第6部分:冲击式钻机
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 6: Impact drills
|
JIS B7762-7-2006
|
便携式手提动力工具.手柄振动测量.第7部分:扳手、旋具和具有冲击、推力或棘齿作用的螺母旋具
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action
|
JIS B7762-8-2006
|
便携式手提动力工具.手柄振动测量.第8部分:抛光机和旋转式轨道和特殊轨道磨光机
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 8: Polishers and rotary, orbital and random orbital sanders
|
JIS B7762-9-2006
|
便携式手提动力工具.手柄振动测量.第9部分:汽锤
|
Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 9: Rammers
|
JIS C5402-15-8-2002
|
电子设备连接器.试验和测量.第15-8部分:连接器试验(机械的).试验15h:触电限动系统的耐工具使用性
|
Connectors for electronic equipment -- Tests and measurements -- Part 15-8: Connector tests (mechanical) -- Test 15h: Contact retention system, resistance to tool application
|
JIS C9029-1-2006
|
移动式电动工具的安全.第1部分:一般要求
|
Safety of transportable motor-operated electric tools -- Part 1: General requirements
|
JIS C9029-2-1-2006
|
移动式电动工具的安全.第2-1部分:圆盘形锯的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-1: Particular requirements for circular saws
|
JIS C9029-2-10-2006
|
移动式电动工具的安全.第2-10部分:切割砂轮机的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-10: Particular requirements for cutting-off grinders
|
JIS C9029-2-11-2006
|
移动式电动工具的安全.第2-11部分:斜切台式锯的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for mitre-bench saws
|
JIS C9029-2-2-2006
|
移动式电动工具的安全.第2-2部分:转向锯的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-2: Particular requirements for radial arm saws
|
JIS C9029-2-3-2006
|
移动式电动工具的安全.第2-3部分:刨刀和刨板机的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-3: Particular requirements for planers and thicknessers
|
JIS C9029-2-4-2006
|
可移动式电动工具的安全.第2-4部分:台式砂轮机的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-4: Particular requirements for bench grinders
|
JIS C9029-2-5-2006
|
移动式电动工具的安全.第2-5部分:带锯的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-5: Particular requirements for band saws
|
JIS C9029-2-6-2006
|
移动式电动工具的安全.第2-6部分:带供水的金刚石钻的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-6: Particular requirements for diamond drills with water supply
|
JIS C9029-2-7-2006
|
移动式电动工具的安全.第2-7部分:带供水的金刚石锯的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-7: Particular requirements for diamond saws with water supply
|
JIS C9029-2-8-2006
|
移动式电动工具的安全.第2-8部分:单轴立式造型机的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-8: Particular requirements for single spindle vertical moulders
|
JIS C9029-2-9-2006
|
移动式电动工具的安全.第2-9部分:斜切锯的特殊要求
|
Safety of transportable motor-operated electric tools -- Part 2-9: Particular requirements for mitre saws
|
JIS C9335-2-45-2005
|
家用和类似用途电器.安全.第2-45部分:便携式加热工具和类似器具的特殊要求
|
Household and similar electrical appliances -- Safety -- Part 2-45: Particular requirements for portable heating tools and similar appliances
|
JIS C9335-2-8-2004
|
家用和类似用途电气设备的安全.第2-8部分:剃须刀、理发剪刀和类似工具的特殊要求
|
Household and similar electrical appliances -- Safety -- Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
|
JIS C9711-1997
|
室内配线用电线接线压缩工具
|
Compression tools for wire connectors of interior wiring
|
JIS C9745-1 AMD 1-2006
|
手持式电动工具的安全.第1部分:一般要求(修改件1)
|
Safety of hand-held motor-operated electric tools -- Part 1: General requirements (Amendment 1)
|
JIS C9745-1-1999
|
手提式电动工具的安全.第1部分:一般要求
|
Safety of hand-held motor-operated electric tools -- Part 1: General requirements
|
JIS C9745-2-1-1999
|
手提式电动工具的安全.第2部分:钻头的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for drills
|
JIS C9745-2-11-2000
|
手提式电动工具的安全.第2-11部分:往复式锯的特殊要求(往复式锯和军刀锯)
|
Safety of hand-held motor-operated electric tools -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
|
JIS C9745-2-12-2000
|
手提式电动工具的安全.第2-12部分:混凝土振捣器的特殊要求(内振捣器)
|
Safety of hand-held motor-operated electric tools -- Part 2-12: Particular requirements for concrete vibrators (internal vibrators)
|
JIS C9745-2-13-2000
|
手提式电动工具的安全.第2-13部分:链锯的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-13: Particular requirements for chain saws
|
JIS C9745-2-14-1999
|
手提式电动工具的安全.第2部分:刨刀的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for planers
|
JIS C9745-2-15-2000
|
手提式电动工具的安全.第2-15部分:绿篱修剪机和割草机的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-15: Particular requirements for hedge trimmers and grass shears
|
JIS C9745-2-16-2000
|
手提式电动工具的安全.第2-16部分:钉钉机的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-16: Particular requirements for tackers
|
JIS C9745-2-17-2000
|
手提式电动工具的安全.第2-17部分:电动木铣和修整器的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-17: Particular requirements for routers and trimmers
|
JIS C9745-2-2-2000
|
手提式电动工具的安全.第2-2部分:旋具和套筒扳手的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-2: Particular requirements for screwdrivers and impact wrenches
|
JIS C9745-2-3-1999
|
手提式电动工具的安全.第2部分:磨床、抛光机和砂轮磨光机的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for grinders, polishers and disk-type sanders
|
JIS C9745-2-4-2000
|
手提式电动工具的安全.第2-4部分:打磨器的特殊要求
|
Safety of hand-held motor-operated electric tools Part 2-4: Particular requirements for sanders
|
JIS C9745-2-5-1999
|
手提式电动工具的安全.第2部分:圆盘锯和圆盘刀的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for circular saws and circular knives
|
JIS C9745-2-6-2000
|
手提式电动工具的安全.第2-6部分:锤子的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-6: Particular requirements for hammers
|
JIS C9745-2-7-2000
|
手提式电动工具的安全.第2-7部分:不易燃液体喷枪的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-7: Particular requirements for spray guns for non-flammable liquids
|
JIS C9745-2-8-2000
|
手提式电动工具的安全.第2-8部分:薄板材金属剪的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-8: Particular requirements for sheet metal shears
|
JIS C9745-2-9-2000
|
手提式电动工具的安全.第2-9部分:攻丝机的特殊要求
|
Safety of hand-held motor-operated electric tools -- Part 2-9: Particular requirements for tappers
|
JIS F7602-1989
|
机舱内的工具和备件
|
Tools and outfits in machinery space
|
JIS F7603-1992
|
小船.发动机舱的工具和仪器
|
Small ships -- Tools and instruments of engine department
|
JIS G4401-2006
|
碳素工具钢
|
Carbon tool steels
|
JIS G4403-2006
|
高速工具钢
|
High speed tool steels
|
JIS G4404-2006
|
合金工具钢
|
Alloy tool steels
|
JIS G7701-2000
|
工具钢
|
Tool steels
|
JIS K7214-1985
|
用冲孔工具测定塑料抗剪强度的测试方法
|
Testing methods for shear strength of plastics by punch tool
|
JIS M0103-2003
|
钻探设备和工具术语汇编
|
Glossary of terms for drilling equipments and tools
|
JIS M3916-1983
|
矿山工具用硬质合金刀片
|
Cemented carbide tips for mining tools
|
JIS M7002-1996
|
无火花的铍铜合金工具的不易燃性试验方法
|
Non-ignition testing methods for non-sparking beryllium copper alloy tools
|
JIS M7615-1987
|
无火花的铍铜合金工具
|
Nonsparking beryllium copper alloy tools
|
JIS R6211-16-2006
|
粘合磨料产品.尺寸.第16部分:手持电动工具切割用砂轮
|
Bonded abrasive products -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools
|
JIS R6211-6-2003
|
粘合磨料产品.尺寸.第6部分:工具和工具室研磨用砂轮
|
Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding
|
JIS S6060-1996
|
14岁以下(含14岁)儿童用书写和划线工具罩的安全性要求
|
Caps for writing and marking instruments intended for use by children up to 14 years of age -- Safety requirements
|
JIS T5506-1-2001
|
牙科旋转仪器.切削工具.第1部分:钢制实验室切削工具
|
Dental rotary instruments -- Cutters -- Part 1: Steel laboratory cutters
|
JIS T5506-2-2001
|
牙科旋转仪器.切削工具.第2部分:硬质合金实验室切削工具
|
Dental rotary instruments -- Cutters -- Part 2: Carbide laboratory cutters
|
JIS T5506-3-2001
|
牙科旋转仪器.切削工具.第3部分:硬质合金实验室切削工具. 研磨机
|
Dental rotary instruments -- Cutters -- Part 3: Carbide laboratory cutters -- Milling machines
|
JIS T5506-4-2005
|
牙科用旋转仪器.切削工具.第4部分:小型硬质合金制实验室切削工具
|
Dental rotary instruments -- Cutters -- Part 4: Miniature carbide laboratory cutters
|
JIS X0132-1996
|
信息技术.编程中分支语句( CASE )工具的评价和选择指南
|
Information technology -- Guideline for the evaluation and selection of CASE tools
|
JIS X0204-1969
|
磁带方式进行信息互换的代码工具
|
Implementation of code for information interchange on magnetic tape
|
JIS X0206-1977
|
盒式磁带方式进行信息互换的代码工具
|
Implementation of code for information interchange on magnetic tape cassette
|
JIS X3050-1996
|
信息技术.便携式通用工具的环境(PCTE).第1部分:抽象规范
|
Information technology -- Portable Common Tool Environment (PCTE) -- Part 1: Abstract specification
|
JIS X9301-2005
|
信息技术.在客户机/服务器模式中数据库通信管理的移动工具用户接口
|
Information technology -- User interfaces for mobile tools for management of database communications in a client-server model
|
编号 |
中文名称 |
英文名称 |