| 编号 | 中文名称 | 英文名称 |
|---|
| ISO 10101-1-1993
| 天然气.卡尔.菲舍尔法测定水.第1部分:前言
| Natural gas; determination of water by the Karl Fischer method; part 1: introduction
|
| ISO 10101-2-1993
| 天然气 卡尔·费休法测定天然气中的水 第2部分:滴定法
| Natural gas; determination of water by the Karl Fischer method; part 2: titration procedure
|
| ISO 10101-3-1993
| 天然气 卡尔·费休法测定天然气中的水 第3部分:库仑法
| Natural gas; determination of water by the Karl Fischer method; part 3: coulometric procedure
|
| ISO 10400-1993
| 石油和天然气工业 套管、油管、钻杆和管线管性能公式与计算
| Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe and line pipe properties
|
| ISO 10405-2000
| 石油和天然气工业 套管和油管的维护和使用
| Petroleum and natural gas industries - Care and use of casing and tubing
|
| ISO 10407-1993
| 石油和天然气工业 钻井和生产设备 钻柱设计和操作极限
| Petroleum and natural gas industries; drilling and production equipment; drill stem design and operating limits
|
| ISO 10414-1-2001
| 石油和天然气工业 钻探油液的现场试验 第1部分：水基油液
| Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
|
| ISO 10414-2-2002
| 石油和天然气工业.钻井液的现场试验.第2部分:以油为基础的液体
| Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids
|
| ISO 10416-2002
| 石油和天然气工业.钻用冲洗液.实验室试验
| Petroleum and natural gas industries - Drilling fluids - Laboratory testing
|
| ISO 10417-2004
| 石油和天然气工业.井下安全阀系统.设计、安装、操作和修整
| Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
|
| ISO 10418-2003
| 石油和天然气工业.近海生产装置.基础表面操作安全系统
| Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
|
| ISO 10423-2003
| 石油和天然气工业.钻井和开采设备.井口设施和采油树设备
| Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment
|
| ISO 10424-1-2004
| 石油和天然气工业.旋转钻孔设备.第1部分:旋转钻杆构件
| Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements
|
| ISO 10425-2003
| 石油和天然气工业用钢丝绳.最低要求和验收条件
| Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
|
| ISO 10426-1-2005
| 石油和天然气工业.油井固井用水泥和材料.第1部分:规范
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification
|
| ISO 10426-2 AMD 1-2005
| 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥的试验.修改件1:亲水性试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements; Amendment 1: Water-wetting capability testing
|
| ISO 10426-2 Technical Corrigendum 1-2006
| 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥测试
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements
|
| ISO 10426-2-2003
| 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥的试验
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements
|
| ISO 10426-3-2003
| 石油和天然气工业.油井固井用水泥和材料.第3部分:深水油井水泥成分的测试
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations
|
| ISO 10426-4-2004
| 石油和天然气工业.油井固井用水泥和材料.第4部分:在大气压力下泡沫水泥浆的制备和检验
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure
|
| ISO 10426-5-2004
| 石油和天然气工业.油井固井用水泥和材料.第5部分:在大气压力下固井水泥加工制剂的收缩和膨胀的测定
| Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
|
| ISO 10427-1-2001
| 石油和天然气工业 套管扶正器 第1部分：弓性弹簧套管扶正器
| Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers
|
| ISO 10427-2-2004
| 石油和天然气工业.固井用设备.第2部分:扶正器的放置和限动环的检测
| Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing
|
| ISO 10427-3-2003
| 石油和天然气工业.固井用设备.第3部分:固井浮动设备的性能试验
| Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment
|
| ISO 10428-1993
| 石油和天然气工业 抽油杆(抽油杆短节 光杆 接箍和变径接箍) 规范
| Petroleum and natural gas industries; sucker rods (pony-rods, polished rods, couplings and sub-couplings); specification
|
| ISO 10431-1993
| 石油和天然气工业 抽油机 规范
| Petroleum and natural gas industries; pumping units; specification |
| ISO 10432-2004
| 石油和天然气工业.下降孔设备.地下安全阀设备
| Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
|
| ISO 10437-2003
| 石油、石油化学和天然气工业.专用汽轮机设备
| Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications
|
| ISO 10438-1-2003
| 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements
|
| ISO 10438-2-2003
| 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems
|
| ISO 10438-3-2003
| 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems
|
| ISO 10438-4-2003
| 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统
| Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems
|
| ISO 10440-1-2007
| 石油、石化和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机
| Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors
|
| ISO 10440-2-2001
| 石油和天然气工业 旋转型容积式压缩机 第2部分：封装的空气压缩机（无油）
| Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free)
|
| ISO 10441-2007
| 石油、石化和天然气工业.机械动力传输用挠性联轴节.特殊应用
| Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications
|
| ISO 10715-1997
| 天然气 取样指南
| Natural gas - Sampling guidelines
|
| ISO 10723 Technical Corrigendum 1-1998
| 天然气 在线分析系统的性能评定 技术勘误1
| Natural gas - Performance evaluation for on-line analytical systems; Technical Corrigendum 1
|
| ISO 10723-1995
| 天然气 在线分析系统的性能评定
| Natural gas - Performance evaluation for on-line analytical systems
|
| ISO 11439-2000
| 气瓶 车上贮存机动车用天然气燃料用高压气瓶
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| ISO 11541-1997
| 天然气 高压下含水量的测定
| Natural gas - Determination of water content at high pressure
|
| ISO 11960 Technical Corrigendum 1-2006
| 石油和天然气工业.油井套管或油管用钢管.技术勘误1
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1
|
| ISO 11960-2004
| 石油和天然气工业.油井套管和油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
| ISO 11961-1996
| 石油和天然气工业 钻井杆用钢管 规范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
| ISO 12213-1-2006
| 天然气.压缩因子的计算.第1部分:介绍和指南
| Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
|
| ISO 12213-2-2006
| 天然气.计算压缩因子.第2部分:利用摩尔成分分析计算
| Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis
|
| ISO 12213-3-2006
| 天然气.压缩因子计算.第3部分:利用物理特性计算
| Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
|
| ISO 13398-1997
| 冷冻轻烃液 液化天然气 船上输油监测方法
| Refrigerated light hydrocarbon fluids - Liquefied natural gas - Procedure for custody transfer on board ship
|
| ISO 13443 Technical Corrigendum 1-1997
| 天然气.标准参比条件.技术勘误1
| Natural gas - Standard reference conditions; Technical Corrigendum 1
|
| ISO 13443-1996
| 天然气 标准参比条件
| Natural gas - Standard reference conditions
|
| ISO 13500-2006
| 石油和天然气工业.钻井液体材料.规范和测试
| Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
|
| ISO 13501-2005
| 石油和天然气工业.钻井液.加工系统评价
| Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
|
| ISO 13503-1 Technical Corrigendum 1-2005
| 石油和天然气工业.完井液和材料.第1部分:完井液粘性测量.技术勘误1
| Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids; Technical Corrigendum 1
|
| ISO 13503-1-2003
| 石油和天然气工业.完井液和材料.第1部分:完井液粘着特性的测量
| Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids
|
| ISO 13503-2-2006
| 石油和天然气工业.完井液和材料.第2部分:高压水砂破裂法和砾石包装作业用支撑剂性能测定
| Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
|
| ISO 13503-3 Technical Corrigendum 1-2006
| 石油和天然气工业.完井液和材料.第3部分:重盐水的试验.技术勘误1
| Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines; Technical Corrigendum 1
|
| ISO 13503-3-2005
| 石油和天然气工业.完井液和材料.第3部分:重盐水的试验
| Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines
|
| ISO 13503-4-2006
| 石油和天然气工业.完井液和材料.第4部分:在静态条件下测量外部碰击和砂砾包装液体泄露程序
| Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
|
| ISO 13503-5-2006
| 石油和天然气工业.完井液和材料.第5部分：测量重盐水长期电导率程序.技术勘误1
| Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants
|
| ISO 13533 Technical Corrigendum 1-2005
| 石油和天然气工业.钻井和生产设备.钻通设备.技术勘误1
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment; Technical Corrigendum 1
|
| ISO 13533-2001
| 石油和天然气工业 钻井和生产设备 钻井设备
| Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
|
| ISO 13534-2000
| 石油和天然气工业 钻井和生产设备 提升设备的检查、维护、修理和再制造
| Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment
|
| ISO 13535-2000
| 石油和天然气工业 钻井和生产设备 提升设备
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment
|
| ISO 13623-2000
| 石油和天然气工业.管道输送系统
| Petroleum and natural gas industries - Pipeline transportation systems
|
| ISO 13625-2002
| 石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器
| Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings
|
| ISO 13626-2003
| 石油和天然气工业.钻井和生产设备.钻井和井检修结构
| Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
|
| ISO 13628-10-2005
| 石油和天然气工业.水下采油系统的设计和操作.第10部分:连接柔性管规范
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
|
| ISO 13628-11-2007
| 石油和天然气工业.水底生产系统的设计和运行.第11部分:海底和海上设备用软管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications
|
| ISO 13628-2-2006
| 石油和天然气工业.水下采油系统的设计和操作.第2部分:海底和海洋设备用游离软管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications
|
| ISO 13628-3-2000
| 石油和天然气工业 水下采油系统的设计和操作 第3部分:通流线系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowtime (TFL) systems
|
| ISO 13628-4-1999
| 石油和天然气工业 水下采油系统的设计和操作 第4部分:井口和采油树设备
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
|
| ISO 13628-5-2002
| 石油和天然气工业.水下采油系统的设计和操作.第5部分:水下缆线和管道
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
|
| ISO 13628-6-2006
| 石油和天然气工业.水下采油系统的设计和操作.第6部分:水下生产控制系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems
|
| ISO 13628-7-2005
| 石油和天然气工业.水下采油系统的设计和操作.第7部分:完井/修井提升管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
|
| ISO 13628-8 Technical Corrigendum 1-2005
| 石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口.技术勘误1
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems; Technical Corrigendum 1
|
| ISO 13628-8-2002
| 石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
|
| ISO 13628-9-2000
| 石油和天然气工业 水下采油系统的设计和操作 第9部分:遥控设备干预系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tools (ROT) intervention systems
|
| ISO 13631-2002
| 石油和天然气工业.包装用往复式气体压缩机
| Petroleum and natural gas industries - Packaged reciprocating gas compressors
|
| ISO 13678 Technical Corrigendum 1-2005
| 石油和天然气工业.对套管、管道和管线用的螺纹油的评定和试验.技术勘误1
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe; Technical Corrigendum 1
|
| ISO 13678-2000
| 石油和天然气工业 对套管、管道和管线用的螺纹绝缘膏的评价和试验
| Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
|
| ISO 13679-2002
| 石油和天然气工业.套管和管连接的测试程序
| Petroleum and natural gas industries - Procedures for testing casing and tubing connections
|
| ISO 13680 Technical Corrigendum 2-2004
| 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件.技术勘误2
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
|
| ISO 13680-2000
| 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
| ISO 13686-1998
| 天然气 质量指标
| Natural gas - Quality designation
|
| ISO 13691-2001
| 石油和天然气工业 特殊用途高速传动装置
| Petroleum and natural gas industries - High-speed special-purpose gear units
|
| ISO 13702-1999
| 石油和天然气工业 对海上开发安装中着火和爆炸的控制和减弱 要求和指南
| Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
|
| ISO 13703 Technical Corrigendum 1-2002
| 石油和天然气工业.近海生产平台上管道系统的设计和安装.技术勘误1
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms; Technical Corrigendum 1
|
| ISO 13703-2000
| 石油和天然气工业 海上开采平台上管道系统的设计和安装
| Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms
|
| ISO 13705-2006
| 石油、石化和天然气工业.一般炼油厂火力加热器
| Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service
|
| ISO 13706-2005
| 石油、石化和天然气工业.风冷热交换器
| Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
|
| ISO 13707-2000
| 石油和天然气工业 往复式压缩机
| Petroleum and natural gas industries - Reciprocating compressors
|
| ISO 13709-2003
| 石油、石油化工和天然气工业用离心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries
|
| ISO 13710-2004
| 石油、石油化学和天然气工业.往复式变容真空泵
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
|
| ISO 13734 Technical Corrigendum 1-1999
| 天然气 有机硫化物添味剂 要求和试验方法 技术勘误1
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods; Technical Corrigendum 1
|
| ISO 13734-1998
| 天然气 有机硫化物添味剂 要求和试验方法
| Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods
|
| ISO 13819-2-1995
| 石油和天然气工业 海上结构 第2部分:固定的钢结构
| Petroleum and natural gas industries - Offshore structures - Part 2: Fixed steel structures
|
| ISO 13847 Technical Corrigendum 1-2001
| 石油和天然气工业.管道输送系统.管道焊接.技术勘误1
| Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines; Technical Corrigendum 1
|
| ISO 13847-2000
| 石油和天然气工业 管道输送系统 管道的焊接
| Petroleum and natural gas industrie - Pipeline transportation systems - Welding of pipelines
|
| ISO 13879-1999
| 石油和天然气工业 功能规范的内容和起草
| Petroleum and natural gas industries - Content and drafting of a functional specification
|
| ISO 13880-1999
| 石油和天然气工业 技术规范的内容和起草
| Petroleum and natural gas industries - Content and drafting of a technical specification
|
| ISO 14111-1997
| 天然气 分析溯源性准则
| Natural gas - Guidelines for traceability in analysis
|
| ISO 14224-2006
| 石油、石化产品和天然气工业.设备可靠性和维修数据的采集与交换
| Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
|
| ISO 14310-2001
| 石油和天然气工业 下井设备 封隔器和桥塞
| Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
|
| ISO 14313-1999
| 石油和天然气工业 管道输送系统 管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
|
| ISO 14469-1-2004
| 道路车辆.压缩天然气(CNG)加添油连接器.第1部分:20 MPa (200 bar)连接器
| Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 1: 20 MPa (200 bar) connector
|
| ISO 14469-3-2006
| 道路车辆.压缩天然气(CNG)填充连接器.第3部分:25 MPa (250 bar)连接器
| Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 3: 25 MPa (250 bar) connector
|
| ISO 14532 Technical Corrigendum 1-2002
| 天然气.词汇.技术勘误1
| Natural gas - Vocabulary; Technical Corrigendum 1
|
| ISO 14532-2001
| 天然气 词汇
| Natural gas - Vocabulary
|
| ISO 14691-1999
| 石油和天然气工业 机械动力传输用挠性接箍 一般用途
| Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications
|
| ISO 14692-1-2002
| 石油和天然气工业.玻璃纤维增强塑料管.第1部分:词汇、符号、应用和材料
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
|
| ISO 14692-2 Technical Corrigendum 1-2005
| 石油和天然气工业.玻璃增强塑料(GRP)管.第2部分:合格鉴定和制造.技术勘误1
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture; Technical Corrigendum 1
|
| ISO 14692-2-2002
| 石油和天然气工业.玻璃纤维增强塑料管.第2部分:合格鉴定和制造
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
|
| ISO 14692-3 Technical Corrigendum 1-2005
| 石油和天然气工业.玻璃增强塑料(GRP)管.第3部分:系统设计.技术勘误1
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design; Technical Corrigendum 1
|
| ISO 14692-3-2002
| 石油和天然气工业.玻璃纤维增强塑料管.第3部分:系统管道
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System piping
|
| ISO 14692-4 Technical Corrigendum 1-2006
| 石油和天然气工业.玻璃纤维增强塑料管.第4部分:制作、安装和操作;技术勘误1
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation; Technical Corrigendum 1
|
| ISO 14692-4-2002
| 石油和天然气工业.玻璃纤维增强塑料管.第4部分:制作、安装和操作
| Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
|
| ISO 14693-2003
| 石油和天然气工业.钻井和油井辅助设备
| Petroleum and natural gas industries - Drilling and well-servicing equipment
|
| ISO 14723-2001
| 石油和天然气工业 管道输送系统 海底管道阀
| Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
|
| ISO 15136-1-2001
| 石油和天然气工业用下降孔设备 人工升降机用推进腔体泵系统 第1部分：泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps
|
| ISO 15136-2-2006
| 石油和天然气工业.人工升降机用推进腔体泵系统.第2部分:表面传动系统
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems
|
| ISO 15138 Technical Corrigendum 1-2001
| 石油和天然气工业 海上开采装置 供暖 通风和空气调节 技术勘误1
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning; Technical Corrigendum 1
|
| ISO 15138-2000
| 石油和天然气工业 海上开采装置 供暖 通风和空气调节
| Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
|
| ISO 15156-1 Technical Corrigendum 1-2005
| 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化材料选择的一般原则.技术勘误
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials; Technical Corrigendum 1
|
| ISO 15156-1-2001
| 石油和天然气工业 石油制品和天然气生产中含硫化氢（H2S）环境下使用的材料 第1部分：耐破裂材料的一般选
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials
|
| ISO 15156-2 Technical Corrigendum 1-2005
| 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳钢和低合金钢及铸铁的使用.
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons; Technical Corrigendum 1
|
| ISO 15156-2-2003
| 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons
|
| ISO 15156-3 Technical Corrigendum 1-2005
| 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金.
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 1
|
| ISO 15156-3 Technical Corrigendum 2-2005
| 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金.
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 2
|
| ISO 15156-3-2003
| 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金
| Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
|
| ISO 15403-1-2006
| 天然气.汽车用压缩性燃料天然气.第1部分:质量标记
| Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
|
| ISO 15463-2003
| 石油和天然气工业.新套管、管和平端钻管的现场检验
| Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
|
| ISO 15500-1 AMD 1-2003
| 道路车辆.压缩天然气(CNG)燃料系统元部件.第1部分:一般要求和定义.修改1
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions; Amendment A1
|
| ISO 15500-1-2000
| 道路车辆 压缩天然气(CNG)燃料系统部件 第1部分:一般要求和定义
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions
|
| ISO 15500-10-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第10部分:气流调节器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster
|
| ISO 15500-11-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第11部分:天然气/空气混合器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 11: Gas/air mixer
|
| ISO 15500-12-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第12部分:减压阀
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)
|
| ISO 15500-13-2001
| 道路车辆 压缩天然气（CNG）燃料系统部件 第13部分：减压器（PRD）
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD)
|
| ISO 15500-14-2002
| 道路车辆.压缩天然气(CNG)燃料系统部件.第14部分:溢流阀
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 14: Excess flow valve
|
| ISO 15500-15-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第15部分:防气罩和通风软管
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 15: Gas-tight housing and ventilation hose
|
| ISO 15500-16-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第16部分:硬质燃料管线
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 16: Rigid fuel line
|
| ISO 15500-17-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第17部分:柔性燃料管线
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 17: Flexible fuel line
|
| ISO 15500-18-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第18部分:滤清器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 18: Filter
|
| ISO 15500-19-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第19部分:配件
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 19: Fittings
|
| ISO 15500-2-2001
| 道路车辆 压缩天然气（CNG）燃料系统部件 第2部分：性能和一般试验方法
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performance and general test methods
|
| ISO 15500-20-2007
| 道路车辆.压缩天然气(CNG)燃料系统部件.第20部分:非不锈钢制的硬质燃料管线
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 20: Rigid fuel line in material other than stainless steel
|
| ISO 15500-3-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第3部分:防逆阀
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve
|
| ISO 15500-4-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第4部分:控阀
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve
|
| ISO 15500-5-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第5部分:手控气缸阀
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve
|
| ISO 15500-6-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第6部分:自动阀
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 6: Automatic valve
|
| ISO 15500-7-2002
| 道路车辆.压缩天然气(CNG)燃料系统元部件.第7部分:气体喷射器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 7: Gas injector
|
| ISO 15500-8-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第6部分:压力指示器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 8: Pressure indicator
|
| ISO 15500-9-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第9部分:调压器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator
|
| ISO 15501-1-2001
| 道路车辆 压缩天然气燃料系统 第1部分：安全要求
| Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements
|
| ISO 15501-2-2001
| 道路车辆、压缩天然气(CNG)燃料系统.第2部分:试验方法
| Road vehicles - Compressed natural gas (CNG) fuel systems - Part 2: Test methods
|
| ISO 15544-2000
| 石油和天然气工业 海上开采装置 紧急反应的要求和指南
| Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response
|
| ISO 15546-2007
| 石油和天然气工业.铝合金钻杆
| Petroleum and natural gas industries - Aluminium alloy drill pipe
|
| ISO 15547-1-2005
| 石油、石化和天然气工业.板式热交换器.第1部分:板框式热交换器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers
|
| ISO 15547-2-2005
| 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器
| Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers
|
| ISO 15589-1-2003
| 石油和天然气工业.管道运输系统的阴极保护.第1部分:陆地管线
| Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines
|
| ISO 15589-2-2004
| 石油和天然气工业.管道运输系统的阴极保护.第2部分:海上管线
| Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines
|
| ISO 15590-1-2001
| 石油和天然气工业 管道输送系统用诱导弯头、管件和法兰 第1部分：诱导弯头
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
|
| ISO 15590-2-2003
| 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
|
| ISO 15590-3-2004
| 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第3部分:法兰
| Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
|
| ISO 15649-2001
| 石油和天然气工业 管道
| Petroleum and natural gas industries - Piping
|
| ISO 15663-1-2000
| 石油和天然气工业 寿命周期成本 第1部分:方法学
| Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology
|
| ISO 15663-2-2001
| 石油和天然气工业 寿命周期成本 第2部分：方法学应用指南和计算方法
| Petroleum and natural gas industries - Life cycle costing - Part 2: Guidance on application of methodology and calculation methods
|
| ISO 15663-3-2001
| 石油天然气工业.寿命周期费用分析.第3部分:实施指南
| Petroleum and natural gas industries - Life-cycle costing - Part 3: Implementation guidelines
|
| ISO 15761-2002
| 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀
| Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
|
| ISO 16070-2005
| 石油和天然气工业.下井设备.锁芯轴和落地接头
| Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
|
| ISO 16708-2006
| 石油和天然气工业.管道传输系统.基于可靠性的极限状态法
| Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
|
| ISO 16812-2007
| 石油、石化和天然气工业.壳管式热交换器
| Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
|
| ISO 17078-1-2004
| 石油和天然气工业.钻井和生产设备.第1部分:偏心轴
| Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels
|
| ISO 17776-2000
| 石油和天然气工业 海上开采装置 危险识别和风险评估用方法和技术指南
| Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment
|
| ISO 18453-2004
| 天然气.水含量和水露点的相关性
| Natural gas - Correlation between water content and water dew point
|
| ISO 19078-2006
| 储气瓶.气瓶安装检测和天然气作燃料机动车路上储存用高压储气瓶鉴定
| Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
|
| ISO 19739-2004
| 天然气.用气相色谱法测定硫化合物的含量
| Natural gas - Determination of sulfur compounds using gas chromatography
|
| ISO 19900-2002
| 石油和天然气工业.近海结构的一般要求
| Petroleum and natural gas industries - General requirements for offshore structures
|
| ISO 19901-1-2005
| 石油和天然气工业.海上建筑物的特殊要求.第1部分:Metocean设计和运行研究
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
|
| ISO 19901-2-2004
| 石油和天然气工业.近海建筑物的特殊要求.第2部分:地震设计规程和标准
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria
|
| ISO 19901-4-2003
| 石油和天然气工业.近海建筑物的特殊要求.第4部分:土工和基础设计考虑
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations
|
| ISO 19901-5-2003
| 石油和天然气工业.海上建筑物的特殊要求.第5部分:设计和施工过程中的重量控制
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction
|
| ISO 19901-7-2005
| 石油和天然气工业.海上建筑物的特殊要求.第7部分:浮动式海上建筑物和移动式海上设备用保持系统
| Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
|
| ISO 19903-2006
| 石油和天然气工业.海上固定的混凝土建筑物
| Petroleum and natural gas industries - Fixed concrete offshore structures
|
| ISO 19904-1-2006
| 石油和天然气工业.漂浮离岸设施.第1部分:单体船、半潜水船和轻甲板船
| Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars
|
| ISO 20765-1-2005
| 天然气.热力学性质计算.第1部分:传输和分配设施的气相特性
| Natural gas - Calculation of thermodynamic properties - Part 1: Gas phase properties for transmission and distribution applications
|
| ISO 21329-2004
| 石油和天然气工业.管道运输系统.机械连接器的试验过程
| Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
|
| ISO 23251 Technical Corrigendum 1-2007
| 石油、石化和天然气工业.压力释放和降压系统.技术勘误1
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems; Technical Corrigendum 1
|
| ISO 23251-2006
| 石油、石化和天然气工业.压力.缓解和减少系统
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
|
| ISO 23874-2006
| 天然气.碳露点计算用气相色谱法要求
| Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation
|
| ISO 2928-2003
| 25巴(2.5MPa)及以下的天然气和液相或气相液化石油气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) - Specification
|
| ISO 3183-2007
| 石油和天然气工业.管道运输系统用钢管
| Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
|
| ISO 3183-3 Technical Corrigendum 1-2000
| 石油和天然气工业.管道钢管.交货技术条件.第3部分:C级钢管的要求.技术勘误1
| Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1
|
| ISO 3962-1977
| 石油和天然气工业用材料和设备.油井或天然气井用钢钻杆的钻具接头
| Materials and equipment for petroleum and natural gas industries; Tool joints for steel drill pipe for oil or natural gas wells
|
| ISO 3977-5-2001
| 燃气轮机 采购 第5部分：在石油和天然气工业中的应用
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
|
| ISO 5226-1985
| 石油和天然气工业用材料和设备.油井或天然气井用铝合金钻管
| Materials and equipment for petroleum and natural gas industries; Aluminium alloy drill pipe for oil or natural gas wells
|
| ISO 6326-1-2007
| 天然气.硫化合物测定.第1部分:一般介绍
| Natural gas - Determination of sulfur compounds - Part 1: General introduction
|
| ISO 6326-3-1989
| 天然气 硫化物的测定 第3部分:用电势分析法对硫化氢、硫醇硫和硫化羰基硫的测定
| Natural gas; determination of sulfur compounds; part 3: determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry
|
| ISO 6326-5-1989
| 天然气 硫化物的测定 第5部分:林格聂尔燃烧法
| Natural gas; determination of sulfur compounds; part 5: Lingener combustion method
|
| ISO 6327-1981
| 气体分析 天然气水露点的测定 用表面冷凝湿度计测定
| Gas analysis; Determination of the water dew point of natural gas; Cooled surface condensation hygrometers
|
| ISO 6570-2001
| 天然气 烃液潜在含量的测定 比重法
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods
|
| ISO 6974-1-2000
| 天然气 用气相色谱法测定规定的不确定度的组分 第1部分:简明分析导则
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 1: Guidelines for tailored analysis
|
| ISO 6974-2-2001
| 天然气 用气相色谱法测定具有规定的不确定度的组分 第2部分：测量系统特性和数据处理的统计
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data
|
| ISO 6974-3-2000
| 天然气 用气相色谱法测定规定的不确定度的组分 第3部分:用两填充柱测定氢、氦、氧、氮、二氧化碳和碳至C<下
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C<(Index)8> using two packed columns
|
| ISO 6974-4-2000
| 天然气 用气相色谱法测定规定的不确定度的组分 第4部分:用两柱测定实验室和在线测量系统用的氮、二氧化碳和
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxyde and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line measuring system using two columns
|
| ISO 6974-5-2000
| 天然气 用气相色谱法测定规定的不确定度的组分 第5部分:用三柱测定实验室和在线处理用的氮、二氧化碳和碳<
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen, carbon dioxide and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line process application using three columns
|
| ISO 6974-6 Technical Corrigendum 1-2003
| 天然气.用气相色谱法测定规定了不确定度的组分.第6部分:用三个毛细管柱测定氢、氦、氧、氮、二氧化碳和C1到
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns; Technical Corrigendum 1
|
| ISO 6974-6-2002
| 天然气.用气相色谱法测定规定的不确定度的组分.第6部分:用三个毛细管柱测定氢、氦、氧、氮、二氧化碳和C<下
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C<(Index)1> to C<(Index)8> hydrocarbons using three capillary columns
|
| ISO 6975-1997
| 天然气 延伸分析 气相色谱法
| Natural gas - Extended analysis - Gas-chromatographic method
|
| ISO 6976 Technical Corrigendum 1-1997
| 天然气.热值、密度和相对密度及化合物沃泊指数的计算.技术勘误1
| Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 1
|
| ISO 6976 Technical Corrigendum 2-1997
| 天然气 热值、密度和相对密度及化合物沃泊指数的计算 技术勘误2
| Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 2
|
| ISO 6976 Technical Corrigendum 3-1999
| 天然气 热值、密度和相对密度及化合物沃泊指数的计算 技术勘误3
| Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 3
|
| ISO 6978-1-2003
| 天然气.汞的测定.第1部分:用碘化学吸附法对汞的采样
| Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine
|
| ISO 6978-2 Technical Corrigendum 2-2006
| 天然气.汞的测定.第2部分:用金/铂合金混汞法对汞的采样.技术勘误2
| Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy; Technical Corrigendum 2
|
| ISO 6978-2-2003
| 天然气.汞的测定.第2部分:用碘/铂合金混汞法对汞的采样
| Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy
|
| ISO 8943-2007
| 冷冻轻质烃液.液化天然气的取样.连续法和间歇法
| Refrigerated light hydrocarbon fluids - Sampling of liquefied natural gas - Continuous and intermittent methods
|
| ISO/TR 13881-2000
| 石油和天然气工业 产品、加工和服务的分类和合格评定
| Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services
|
| ISO/TR 24094-2006
| 天然气分析.气态标准物质的证实方法
| Analysis of natural gas - Validation methods for gaseous reference materials
|
| ISO/TS 15926-4-2007
| 工业自动化系统和集成.包括石油和天然气生产设施的加工设备使用寿命数据的集成.第4部分:原始参考数据
| Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 4: Initial reference data
|
| ISO/TS 16922-2002
| 天然气.添味气体用导则
| Natural gas - Guidelines for odorizing gases
|
| ISO/TS 24817-2006
| 石油、石化和天然气工业.管件用复合材料检修. 资格鉴定和设计、安装、试验和检验
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection
|
| ISO/TS 29001-2003
| 石油、化工和天然气工业.部门专用质量管理系统.产品和服务机构的要求
| Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com