| 编号 |
中文名称 |
英文名称 |
| ANSI A108.4-1999
|
用有机粘结剂或水可洗环氧树脂陶瓷砖粘结剂铺设瓷砖的规范(包括ANSI A108.1-1992)
|
Specifications for Installation of Ceramic Tile with Organic Adhesives or Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992)
|
| ANSI A118.3-1999
|
耐化学药品的水可清洗的磁砖安装和灌浆环氧树脂和水可清洗的磁砖固定粘结剂规范(包括ANSI A108.1-1992)
|
Specifications for Chemical Resistant, Water Cleanable Tile-Setting and Grouting Epoxy and Water Cleanable Tile Setting Epoxy Adhesive (included in ANSI A108.1-1992)
|
| ANSI A118.5-1999
|
瓷砖铺设用耐化学药品呋喃树脂砂浆和薄泥浆规范(包括ANSI A108.1-1992)
|
Specifications for Chemical Resistant Furan Resin Mortars and Grouts for Tile Installation (included in ANSI A108.1-1992)
|
| ANSI A118.8-1999
|
改良环氧树脂乳状砂浆薄泥浆规范(包括ANSI A108.1-1992)
|
Specifications for Modified Epoxy Emulsion Mortar Grout (included in ANSI A108.1-1992)
|
| ANSI/ADA 13-1981
|
假牙冷冻治疗修复树脂
|
Denture Cold-Curing Repair Resin
|
| ANSI/ADA 17-1983
|
义齿基托临时更换树脂
|
Denture Base Temporary Relining Resins
|
| ANSI/ASTM C581-2003
|
液体设备的玻璃纤维增强结构用热固性树脂耐化学腐蚀性测定的实施规范
|
Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
|
| ANSI/ASTM D1755-2001
|
聚氯乙烯树脂规范(08.02)
|
Specification for Poly(Vinyl Chloride) Resins
|
| ANSI/ASTM D1763-1994
|
环氧树脂规范(08.01)
|
Specification for Epoxy Resins (08.01)
|
| ANSI/ASTM D2222-1994
|
氯乙烯树脂甲醇萃取的试验方法(X-15-393)(08.01)
|
Test Method for Methanol Extract of Vinyl Chloride Resins (X-15-393) (08.01)
|
| ANSI/ASTM D2291-1998
|
玻璃树脂环状试样制备惯例
|
Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
|
| ANSI/ASTM D2310-2006
|
机制玻璃纤维(玻璃纤维增强热固树脂)管规范
|
Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ANSI/ASTM D2471-1999
|
活性热固树脂胶凝时间和最大放热温度测试方法(08.02)
|
Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02)
|
| ANSI/ASTM D2517-2006
|
增塑环氧树脂气压管和配件规范
|
Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
|
| ANSI/ASTM D2538-1995
|
用扭矩流变仪测定聚氯乙烯树脂熔化的试验方法(08.02)
|
Test Method for Fusion of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer (08.02)
|
| ANSI/ASTM D2873-1994
|
用注汞式孔隙度仪测定聚氯乙烯树脂的内部孔隙率的试验方法(08.02)
|
Test Method for Interior Porosity of Poly (Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry (08.02)
|
| ANSI/ASTM D2902-2000
|
含氟聚合物树脂热缩管件规范(10.02)
|
Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation
|
| ANSI/ASTM D2924-2001
|
增强热固性树脂管耐外部压力试验(08.04)
|
Reinforced Thermosetting-Resin Pipe, Test Method for External Pressure Resistance of (08.04)
|
| ANSI/ASTM D2925-2001
|
全孔流情况下玻璃纤维(玻璃纤维增强热固树脂)束偏转测试方法
|
Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
|
| ANSI/ASTM D2992-2006
|
玻璃纤维(增强玻璃纤维的热固树脂)管和配件用获得静液压或压力设计基础的规范
|
Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
|
| ANSI/ASTM D2996-2001
|
纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂)管用规范
|
Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe
|
| ANSI/ASTM D2997-2001
|
离心成形玻璃纤维(玻璃纤维增强热固树脂)管规范
|
Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ANSI/ASTM D3030-1995
|
氯乙烯树脂的挥发性物质(包括水)的试验方法(08.02)
|
Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins (08.02)
|
| ANSI/ASTM D3262-2006
|
纤维玻璃(玻璃纤维增强热固树脂)污水管规范
|
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
|
| ANSI/ASTM D3293-1991
|
PTFE树脂模制薄板规范(08.03)
|
Specification for PTFE Resin Molded Sheet (08.03)
|
| ANSI/ASTM D3297-1988
|
PTFE树脂零件的模塑和机加工公差的实施规程(08.03)
|
Practice for Molding and Machining Tolerances for PTFE Resin Parts (08.03)
|
| ANSI/ASTM D3299-2000
|
纤维缠绕的玻璃纤维增强的热固树脂耐化学腐蚀的容器规范(08.04)
|
Specification for Filament-Wound Glass Fiber Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04)
|
| ANSI/ASTM D3308-2001
|
PTFE树脂切削带规范(08.03)
|
Specification for PTFE Resin Skived Tape (08.03)
|
| ANSI/ASTM D3367-1998
|
离心力作用下聚氯乙烯树脂增塑剂吸附作用测试方法(08.02)
|
Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force (08.02)
|
| ANSI/ASTM D3368-1999
|
FEP碳氟化合物树脂薄板和薄膜(08.03)
|
FEP Fluorocarbon Resin Sheet and Film (08.03)
|
| ANSI/ASTM D3369-2001
|
TFE碳氟树脂铸膜规范
|
Specification for TFE-Fluorocarbon Resin Cast Film (08.03)
|
| ANSI/ASTM D3517-2006
|
玻璃纤维增强热固性树脂压力管的规范
|
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
|
| ANSI/ASTM D3567-1997
|
玻璃纤维(玻璃纤维增强热固树脂)管和配件的尺寸测定用实施规程
|
Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
|
| ANSI/ASTM D3596-2001
|
普通聚氯乙烯树脂中凝胶测定惯例(08.03)
|
Practice for Determination of Gels (Fisheyes) in General-Purpose Poly(Vinyl Chloride) (PVC) Resins
|
| ANSI/ASTM D3681-2006
|
在偏转条件下玻璃纤维(玻璃纤维增强热固树脂)管的耐化学腐蚀的试验方法
|
Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
|
| ANSI/ASTM D3754-2006
|
玻璃纤维增强热固性树脂污水压力管和工业压力管的规范
|
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
|
| ANSI/ASTM D3839-2002
|
柔性增强热固性树脂管和增强塑料砂浆管的地下安装实施规范(08.04)
|
Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.04)
|
| ANSI/ASTM D3982-2003
|
接触压模制玻璃纤维增强热固性树脂管和护罩规范
|
Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Duct and Hoods
|
| ANSI/ASTM D4024-2000
|
增强热塑性树脂法兰规范(08.04)
|
Specification for Reinforced Thermosetting Resin (Rtr) Flanges (08.04)
|
| ANSI/ASTM D4097-2001
|
纤维玻璃增强的热固树脂耐化学药品罐的规范
|
Specification for Conduct Molded Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04)
|
| ANSI/ASTM D4398-2007
|
用板单面曝光法测定玻璃纤维增强热固性树脂耐化学性的试验方法
|
Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure
|
| ANSI/ASTM D4473-2001
|
采用动态机械特性测量热固树脂弯曲特性
|
Measuring the Cure Behavior of Thermosetting Resins Using Dynamic Mechanical Properties (08.03)
|
| ANSI/ASTM D4895-1998
|
分散产生的聚四氟乙烯(PTFE)树脂规范(08.03)
|
Specification for Polytetrafluoroethylene (PTFE) Resins Produced from Dispersion (08.03)
|
| ANSI/ASTM D5365-2006
|
玻璃纤维(玻璃纤维增强热固树脂)管的长期环弯曲应力试验方法
|
Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ANSI/ASTM D5421-2005
|
接触模制玻璃纤维(玻璃-纤维-增强热固性树脂)法兰的标准规范
|
Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
|
| ANSI/ASTM D5677-2005
|
用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型
|
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
|
| ANSI/ASTM D5685-2005
|
玻璃纤维规范.(玻璃纤维加固的热硬性树脂)加压管配件
|
Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
|
| ANSI/ASTM D5813-2004
|
现场固化的热固性树脂污水管规范
|
Specification for Cured-in-place Thermosetting Resin Sewer Pipe
|
| ANSI/ASTM D6041-1997
|
接触模压"纤维玻璃" (玻璃纤维增强热固性树脂)耐腐蚀管和配件规范
|
Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
|
| ANSI/ASTM D6314-1998
|
碳氟化合物Perfluoromethoxy (MFA)树脂模塑和压塑材料规范
|
Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials
|
| ANSI/ASTM D6456-1999
|
多聚树脂精密部件规范
|
Specification for Finished Parts Made from Polymide Resin
|
| ANSI/ASTM D902-2006
|
电绝缘用涂覆柔性树脂的玻璃织物和玻璃带状织物的试验方法
|
Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
|
| ANSI/ASTM F1173-2001
|
船用热固树脂玻璃纤维管和配件规范
|
Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications
|
| ANSI/ASTM F1216a-2007
|
树脂浸渍管的倒置和硫化条件下现有管线和管道修复的实施规程
|
Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
|
| ANSI/ASTM F1473-2007
|
测量聚乙烯管和树脂抗裂纹缓慢增长的切口拉伸试验方法
|
Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
|
| ANSI/ASTM F1743-1996
|
通过现场硫化热固性树脂管的现场拉入安装对已有管道进行修复的操作规程
|
Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-place Installation of Cured-in-place Thermosetting Resin Pipe (CIPP)
|
| ANSI/ASTM F2019-2003
|
将玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)现场拖拉并安装进已有管道的操作规程
|
Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
|
| ANSI/AWWA C210-2003
|
钢制水管的内外层用液体环氧树脂涂层系统
|
Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
|
| ANSI/AWWA C213a-2002
|
钢制水管内外的熔融胶合环氧树脂涂层
|
Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
|
| ANSI/IEEE C57.12.01-2005
|
包括固体浇铸和/或树脂密封绕组的干式配电和电力变压器的标准.一般要求
|
Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin Encapsulated Windings
|
| ANSI/IEEE C57.12.60-1998
|
固体浇铸和树脂密封的电力和配电变压器绝缘系统热评定试验程序指南
|
Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid Cast and Resin-Encapsulated Power and Distribution Transformers
|
| ANSI/IEEE C57.146-2005
|
硅树脂浸变压器产生气体的说明指南
|
Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers
|
| ANSI/IPC CF-148A-1998
|
印制板用涂树脂的金属板
|
Resin-Coated Metal for Printed Boards
|
| ANSI/UL 1684-2002
|
增强热固树脂管件和配件
|
Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
|
| ANSI/UL 1684A-2007
|
超重壁加固热树脂管道(RTRC)和配件的补充要求
|
Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
|
| ASTM A 775/A 775Ma-2007
|
涂环氧树脂的钢筋棒材的标准规范
|
Standard Specification for Epoxy-Coated Steel Reinforcing Bars
|
| ASTM A 882/A 882Ma-2004
|
填充式环氧树脂涂层的7股预应力钢绞线标准规范
|
Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
|
| ASTM A 884/A 884M-2006
|
涂环氧树脂钢丝与焊丝增强的标准规范
|
Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
|
| ASTM A 934/A 934M-2007
|
环氧树脂涂覆的预制钢筋的标准规范
|
Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
|
| ASTM A 950/A 950M-1999
|
熔接环氧树脂涂层结构钢氢反应堆和垛板的标准规范
|
Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
|
| ASTM A 972/A 972M-2000
|
熔接环氧树脂涂覆管桩标准规范
|
Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
|
| ASTM C 1486-2000
|
检验耐化学物质和泥浆扩散的树脂整体地板表面的标准操作规程
|
Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
|
| ASTM C 308-2000
|
耐化学腐蚀树脂灰浆施工时间、凝固时间及维护凝固强度时间的标准试验方法
|
Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
|
| ASTM C 395-2001
|
耐化学腐蚀的树脂灰浆标准规范
|
Standard Specification for Chemical-Resistant Resin Mortars
|
| ASTM C 399-1998
|
耐化学腐蚀树脂灰浆的使用的标准实施规程
|
Standard Practice for Use of Chemical-Resistant Resin Mortars
|
| ASTM C 581-2003
|
液体设备用的玻璃纤维增强结构用热固性树脂耐化学腐蚀性测定的标准实施规范
|
Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
|
| ASTM C 658-1998
|
砖或瓦管用耐化学腐蚀树脂薄浆标准规范
|
Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
|
| ASTM C 723-1998
|
砖和瓦用耐化学侵蚀的树脂薄浆标准实施规程
|
Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
|
| ASTM C 811-1998
|
耐化学侵蚀的树脂整体面层用混凝土表面制备的标准实施规程
|
Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
|
| ASTM C 881/C 881M-2002
|
混凝土用环氧树脂基胶粘系统的标准规范
|
Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
|
| ASTM C 882-2005
|
斜切法测定混凝土用环氧树脂粘结剂的粘结强度的标准试验方法
|
Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
|
| ASTM C 883-1989
|
混凝土用环氧树脂有效收缩性的试验方法
|
Test Method for Effective Shrinkage of Epoxy-Resin Systems Used with Concrete
|
| ASTM C 884/C 884M-1998
|
混凝土和环氧树脂涂层间热容性的标准试验方法
|
Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
|
| ASTM D 1259-2006
|
树脂溶液的不挥发物含量的标准试验方法
|
Standard Test Methods for Nonvolatile Content of Resin Solutions
|
| ASTM D 1490-2001
|
脲甲醛树脂溶液中不挥发物含量的标准测试方法
|
Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
|
| ASTM D 1652-2004
|
环氧树脂中环氧含量的标准试验方法
|
Standard Test Method for Epoxy Content of Epoxy Resins
|
| ASTM D 1725-2004
|
树脂溶液粘度的标准试验方法
|
Standard Test Method for Viscosity of Resin Solutions
|
| ASTM D 1726-2003
|
液体环氧树脂中水解氯含量的标准试验方法
|
Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
|
| ASTM D 1755-1992
|
聚氯乙烯树脂标准规范
|
Standard Specification for Poly(Vinyl Chloride) Resins
|
| ASTM D 1763-2000
|
环氧树脂的标准规范
|
Standard Specification for Epoxy Resins
|
| ASTM D 2105-2001
|
玻璃纤维增强热固树脂管纵向抗张特性的标准试验方法
|
Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
|
| ASTM D 2187-1994
|
粒状离子交换树脂的物理化学特性的标准试验方法
|
Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
|
| ASTM D 2222-1994
|
氯乙烯树脂的甲醇萃取标准试验方法
|
Standard Test Method for Methanol Extract of Vinyl Chloride Resins
|
| ASTM D 2291-2003
|
玻璃纤维树脂复合物用环形试样制作的标准实施规范
|
Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
|
| ASTM D 2310-2006
|
机制的玻璃纤维增强热固树脂管的标准分类方法
|
Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ASTM D 2471-1999
|
活性热固树脂胶凝时间和最大放热温度的标准测试方法
|
Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins
|
| ASTM D 2474-1992
|
氯乙烯共聚树脂
|
Vinyl Chloride Copolymer Resins
|
| ASTM D 2517-2006
|
增强环氧树脂气压管及配件的标准规范
|
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
|
| ASTM D 2584-2002
|
固化的增强树脂燃烧损失的标准试验方法
|
Standard Test Method for Ignition Loss of Cured Reinforced Resins
|
| ASTM D 2689-1988
|
醇酸树脂试验
|
Testing Alkyd Resins
|
| ASTM D 2902-2000
|
电绝缘用含氟聚合物树脂热收缩管的标准规范
|
Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
|
| ASTM D 2924-2001
|
增强的热固树脂管抗外部压力性能的标准试验方法
|
Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ASTM D 2925-2001
|
在满管水流情况下玻璃纤维增强热固树脂管射束偏转的标准试验方法
|
Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
|
| ASTM D 2992-2006
|
玻璃纤维(增强的热固树脂玻璃纤维)管及配件用液体静压设计基础标准实施规程
|
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
|
| ASTM D 2996-2001
|
纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范
|
Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ASTM D 2997-2001
|
离心铸造"纤维玻璃"(玻璃纤维增强的热固性树脂)管的标准规范
|
Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ASTM D 3013-1999
|
环氧基树脂模塑化合物的标准规范
|
Standard Specification for Epoxy Molding Compounds
|
| ASTM D 3030-1995
|
氯乙烯树脂中挥发物(包括水)的标准试验方法
|
Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
|
| ASTM D 3171-2006
|
用基质溶解法测定树脂基质混合物中纤维含量的标准试验方法
|
Standard Test Methods for Constituent Content of Composite Materials
|
| ASTM D 3262-2006
|
玻璃纤维增强热固性树脂污水管的标准规范
|
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
|
| ASTM D 3293-1991
|
聚四氟乙烯树脂模压薄板
|
PTFE Resin Molded Sheet
|
| ASTM D 3294-2003
|
聚四氟乙烯树脂模压薄板和基本模压型材的标准规范
|
Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
|
| ASTM D 3299-2000
|
纤维缠绕的玻璃纤维增强热固树脂耐腐蚀容器的标准规范
|
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
|
| ASTM D 3307-2006
|
全氟烷氧基(PFA)-碳氟树脂模塑及挤压材料标准规范
|
Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
|
| ASTM D 3308-2006
|
聚四氟乙烯树脂薄片带标准规范
|
Standard Specification for PTFE Resin Skived Tape
|
| ASTM D 3367-1998
|
在离心力作用下聚氯乙烯树脂的增塑剂吸收作用的试验方法
|
Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
|
| ASTM D 3368-2004
|
氟化乙丙烯(FEP)-碳氟化合物树脂薄板及薄膜的标准规范
|
Standard Specification for FEP-Fluorocarbon Resin Sheet and Film
|
| ASTM D 3517-2006
|
玻璃纤维增强热固性树脂压力管的标准规范
|
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
|
| ASTM D 3529/D 3529M-1997
|
碳纤维环氧树脂预浸渍中树脂固定含量的标准测试方法
|
Standard Test Method for Resin Solids Content of Carbon Fiber-Epoxy Prepreg
|
| ASTM D 3531-1999
|
碳纤维环氧树脂预浸料坯的树脂流动性标准试验方法
|
Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
|
| ASTM D 3532-1999
|
碳纤维环氧树脂预浸料坯凝固时间的标准试验方法
|
Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
|
| ASTM D 3567-1997
|
增强热固树脂管及配件的尺寸测定规程
|
Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
|
| ASTM D 3596-1992
|
通用聚氯乙烯树脂中凝胶(斑点)测定的标准实施规程
|
Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
|
| ASTM D 3642-1998
|
某些碱溶性树脂软化点的试验方法
|
Test Method for Softening Point of Certain Alkali-Soluble Resins
|
| ASTM D 3643-1998
|
某些碱溶性树脂酸值的试验方法
|
Test Method for Acid Number of Certain Alkali-Soluble Resins
|
| ASTM D 3644-2006
|
苯乙烯-马来酐树脂酸值的试验方法
|
Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
|
| ASTM D 3664-2004
|
电气设备中电容器用双轴取向聚酯树脂薄膜标准规范
|
Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
|
| ASTM D 3681-2006
|
在偏转条件下玻璃纤维(玻璃纤维增强热固树脂)管的耐化学腐蚀的标准试验方法
|
Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
|
| ASTM D 3749-1995
|
用气相色谱液上技术测定聚氯乙烯树脂中残余氯乙烯单体的标准试验方法
|
Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
|
| ASTM D 3754-2006
|
玻璃纤维增强热固性树脂污水压力管和工业压力管的标准规范
|
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
|
| ASTM D 3837-1995
|
碱性可溶树脂溶液制备的标准实施规程
|
Standard Practice for Preparing a Solution of Alkali-Soluble Resins
|
| ASTM D 3839-2002
|
玻璃纤维增强热固树脂管地下安装的标准指南
|
Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe
|
| ASTM D 3840-2001
|
无压设备用玻璃纤维增强热固树脂管配件标准规范
|
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
|
| ASTM D 3963/D 3963M-2001
|
环氧树脂涂覆钢筋制造和现场搬运标准规范
|
Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
|
| ASTM D 3982-2003
|
接触模压制玻璃纤维增强热固性树脂管和防护罩标准规范
|
Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
|
| ASTM D 4024-2005
|
机制"纤维玻璃"(玻璃纤维增强的热固性树脂)法兰的标准规范
|
Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
|
| ASTM D 4097-2001
|
接触模压的玻璃纤维增强热固树脂耐腐蚀罐标准规范
|
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
|
| ASTM D 4142-1989
|
环氧树脂的试验
|
Testing Epoxy Resins
|
| ASTM D 4161-2001
|
使用挠性弹性体密封件的"玻璃钢"(玻璃纤维增强热固树脂)管接头标准规范
|
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
|
| ASTM D 4209-2007
|
纤维素、乳化液、树脂溶液、虫漆和清漆的挥发物和非挥发物含量的测定用标准实施规程
|
Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes
|
| ASTM D 4266-1996
|
粉状离子交换树脂预涂覆能力的标准试验方法
|
Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
|
| ASTM D 4283-1998
|
硅树脂液粘度的标准试验方法
|
Standard Test Method for Viscosity of Silicone Fluids
|
| ASTM D 4301-2005
|
环氧树脂和化合物中总氯含量的标准试验方法
|
Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
|
| ASTM D 4302-2005
|
美术油彩、树脂油和醇酸涂料标准规范
|
Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints
|
| ASTM D 4398-2007
|
用板单面曝光法测定玻璃纤维增强热固树脂的耐化学性的标准试验方法
|
Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
|
| ASTM D 4426-2001
|
木材层压板用液态酚醛树脂中非挥发物含量百分比测定的标准试验方法
|
Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
|
| ASTM D 4456-1999
|
粉末状离子交换树脂的物理和化学特性的试验方法
|
Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
|
| ASTM D 4548-1991
|
混合离子交换树脂的阴、阳离子平衡的试验方法
|
Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
|
| ASTM D 4640-1986
|
热固性酚醛树脂冲击固化时间的测定
|
Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
|
| ASTM D 4690-1999
|
脲甲醛树脂胶粘剂标准规范
|
Standard Specification for Urea-Formaldehyde Resin Adhesives
|
| ASTM D 4895-2004
|
弥散产生的聚四氟乙烯(PTFF)树脂的标准规范
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
|
| ASTM D 5028-1996
|
用热分析法测试挤拉树脂固化性的标准试验方法
|
Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
|
| ASTM D 5042-1990
|
评定微粒子的阴离子交换树脂有机污染物的试验方法
|
Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
|
| ASTM D 5062-1996
|
容积/重量测定法测定树脂溶液稀释度的标准试验方法
|
Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
|
| ASTM D 5165-1993
|
用树脂锅实验室制备胶凝载体的标准规范
|
Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
|
| ASTM D 5213-2007
|
电绝缘和电介质用聚合树脂薄膜的标准规范
|
Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
|
| ASTM D 5365-2006
|
"玻璃钢"(玻璃纤维增强热固树脂)管长期环状弯曲应变的标准试验方法
|
Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
|
| ASTM D 5421-2005
|
接触模制玻璃纤维(玻璃-纤维-增强热固性树脂)法兰的标准规范
|
Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
|
| ASTM D 5508a-1994
|
液面上毛细管气相色谱法测定苯乙烯-丙烯腈共聚物树脂和腈-丁二烯橡胶中残留丙烯腈单体的标准试验方法
|
Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
|
| ASTM D 5627-1994
|
颗粒状离子交换树脂的水可萃取残留物的标准试验方法
|
Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
|
| ASTM D 5677-2005
|
用于航空喷气涡轮机燃料管线的胶粘剂结合型玻璃纤维(玻璃纤维增强热固性树脂)管及管配件标准规范
|
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
|
| ASTM D 5685-2005
|
"玻璃纤维"(玻璃-纤维-增强热固树脂)压力管配件的标准规范
|
Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
|
| ASTM D 5813-2004
|
现场硫化固定的热固性树脂污水管系统的标准规范
|
Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
|
| ASTM D 5958-1999
|
油基油墨树脂溶液配制用标准操作规程
|
Standard Practices for Preparation of Oil-Based Ink Resin Solutions
|
| ASTM D 5974-2000
|
用毛细管气相色谱法测定妥尔油分级分离产品中脂肪和树脂酸的标准试验方法
|
Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
|
| ASTM D 6038-2005
|
用沉降温度测定树脂/溶剂混合物兼容性的标准试验方法(始凝点)
|
Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
|
| ASTM D 6041-1997
|
接触模制(玻璃纤维增强热固树脂)耐腐蚀管和配件标准规范
|
Standard Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
|
| ASTM D 6083-2005
|
屋顶用的液态丙烯树脂涂料的标准规范
|
Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
|
| ASTM D 6090-1999
|
软化点树脂标准试验方法(杯球法)
|
Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
|
| ASTM D 6133-2002
|
通过直接注入一气体色谱仪测定含溶剂和含水涂料、涂层、树脂和原材料中丙酮及甲基和丁基醋酸盐含量的标准试
|
Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
|
| ASTM D 6267-2005
|
高温条件下烃类树脂的表观粘度的试验方法
|
Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
|
| ASTM D 6302-1998
|
离子交换树脂动力行为评价的标准操作规程
|
Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
|
| ASTM D 6314-1998
|
碳氟化合物全氟甲氧基树脂(MFA)模制和挤压材料的标准规范
|
Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials
|
| ASTM D 6440-2005
|
烃类树脂的相关标准术语
|
Standard Terminology Relating to Hydrocarbon Resins
|
| ASTM D 6456-1999
|
由聚酰亚胺树脂生产的精致部件的标准规范
|
Standard Specification for Finished Parts Made from Polyimide Resin
|
| ASTM D 6493-2005
|
用自动环球仪测定烃类树脂软化点的标准试验方法
|
Standard Test Method for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
|
| ASTM D 6579-2006
|
尺寸筛析色谱法测定烃和萜烯树脂的分子重量平均值和分子重量分布用标准实施规程
|
Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
|
| ASTM D 6604-2000
|
用差分式扫描热量仪测定碳氢化合物树脂玻璃导热温度的标准实施规程
|
Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
|
| ASTM D 6605-2006
|
加热后测定烃树脂颜色稳定性的标准实施规程
|
Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
|
| ASTM D 6887-2003
|
测定醇酸与树脂或与树脂溶液兼容性的标准试验方法
|
Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
|
| ASTM D 6989-2003
|
溶剂和水基墨水树脂溶液准备的标准规程
|
Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
|
| ASTM D 902-2006
|
电绝缘用柔性涂树脂玻璃布和玻璃纤维绝缘带的标准试验方法
|
Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
|
| ASTM E 1067-2007
|
玻璃纤维增强塑料树脂(FRP)罐/容器的声排放检验用标准实施规程
|
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
|
| ASTM E 1090-1996
|
树脂中过氧化二异丙苯及其分解产物的标准试验方法
|
Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins
|
| ASTM E 1118-2005
|
强化热固性树脂管(RTRP)声辐射检验的标准实施规程
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
|
| ASTM E 1396-1990
|
辣椒油树脂感官评定的标准试验方法
|
Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
|
| ASTM E 1556-2003
|
合成革、蜂窝状夹层板修补用环氧树脂系统标准规范
|
Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
|
| ASTM E 28-1999
|
用环球仪测定从松脂制品中取得的树脂的软化点的标准试验方法
|
Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
|
| ASTM F 1173-2001
|
船舶用热固性树脂玻璃纤维管道系统标准规范
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
|
| ASTM F 1216b-2007
|
用树脂浸渍管倒置和硫化法恢复现有管线和管道的标准实施规程
|
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
|
| ASTM F 1473-2007
|
测量聚乙烯管和树脂的抗裂缝缓慢扩展的切口拉伸试验用标准试验方法
|
Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
|
| ASTM F 1579-1998
|
外科植入用复芳基酮醚(PAEK)树脂标准规范
|
Standard Specification for Polyaryletherketone (PAEK) Resins for Surgical Implant Applications
|
| ASTM F 1635a-2004
|
外科植入物用水解可降解聚酯树脂和人造支架模型的实验室降解试验的标准试验方法
|
Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
|
| ASTM F 1743-1996
|
对现有硫化固定硫化热固树脂管牵入安装管线和管道修复的标准规程
|
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
|
| ASTM F 1876-1998
|
外科植入用聚醚酮醚二酮树脂的标准规范
|
Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
|
| ASTM F 1925-1999
|
外科植入物用直馏聚(L-乳酸)树脂的标准规范
|
Standard Specification for Virgin Poly(L-Lactic Acid) Resin for Surgical Implants
|
| ASTM F 2019-2003
|
通过玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)的现场拖拉安装修复已有管道的标准操作规程
|
Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
|
| ASTM F 2136-2005
|
测定HDPE树脂或HDPE波纹管抗慢性裂纹增长的凹口恒定带状应力(NCLS)试验的标准试验方法
|
Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
|
| ASTM F 2313-2003
|
摩尔分数大于或等于70%乙二醇的外科植入物用原聚乙二醇和聚乙二醇聚乳酸树脂标准规范
|
Standard Specification for Virgin Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70% Glycolide
|
| ASTM F 2579-2006
|
外科植入物用无定型的聚丙交酯和丙交酯乙交酯共聚物树脂的标准规范
|
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
|
| ASTM F 641a-1998
|
可植入的环氧树脂电子胶囊密封材料标准规范
|
Standard Specification for Implantable Epoxy Electronic Encapsulants
|
| ASTM F 702a-1998
|
医用聚砜树脂标准规范
|
Standard Specification for Polysulfone Resin for Medical Applications
|
| ASTM F 881-1994
|
硅树脂胶和硅树脂固体(非多孔)面部植入物
|
Standard Specification for Silicone Elastomer Facial Implants
|
| ASTM F 997a-1998
|
医疗设备用聚碳酸酯树脂标准规范
|
Standard Specification for Polycarbonate Resin for Medical Applications
|
| IEEE C 57.12.01-1998
|
包括固体浇铸和/或树脂密封绕组式在内的干式配电和电力变压器的一般技术要求
|
(General requirements for dry-type distribution and power transformers including those with solid-cast and/or resin-encapsulated windings)
|
| IEEE C 57.12.60-1998
|
固体浇铸和树脂密封的电力和配电变压器用绝缘系统的热评定试验程序指南
|
(Guide for test procedures for thermal evaluation of insulation systems for solid-cast and resin-encapsulated power and distribution transformers)
|
| UL 1684-2000
|
增强的热固性树脂导管(RTRC)及配件
|
(Reinforced thermosetting resin conduit (RTRC) and fittings )
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com