编号 | 中文名称 | 英文名称 |
BS EN 12433-2-2000 | 工业、商业和车库用门.术语.门的零件 | (Industrial, commercial, and garage doors and gates - Terminology - Parts of doors) |
BS EN 12434-2000 | 低温容器.低温软管 | (Cryogenic vessels - Cryogenic flexible hoses) |
BS EN 12436-2002 | 负载木制结构用粘胶剂.酪蛋白粘胶剂.分类和性能要求 | (Adhesives for load-bearing timber structures - Casein adhesives - Classification and performance requirements) |
BS EN 12438-1998 | 镁及镁合金.铸造阳极用镁合金 | (Magnesium and magnesium alloys - Magnesium alloys for cast anodes) |
BS EN 12439-1999 | 单向用灭菌直肠导管 | (Sterile rectal catheters for single use) |
BS EN 1244-1998 | 胶粘剂.灯光影响下胶粘剂覆层颜色和/或颜色变化的测定 | (Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light) |
BS EN 12440-2001 | 天然石.命名标准 | (Natural stone - Denomination criteria) |
BS EN 12441-1-2002 | 锌及锌合金.化学分析.锌合金中铝的测定.滴定法 | (Zinc and zinc alloys - Chemical analysis - Determination of aluminium in zinc alloys - Titrimetric method) |
BS EN 12441-2-2002 | 锌及锌合金.化学分析.锌合金中镁的测定.火焰原子吸收光谱法 | (Zinc and zinc alloys - Chemical analysis - Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method) |
BS EN 12441-3-2002 | 锌及锌合金.化学分析.铅、镉、铜的测定.火焰原子吸收光谱法 | (Zinc and zinc alloys - Chemical analysis - Determination of lead, cadmium and copper - Flame atomic absorption spectometric method) |
BS EN 12441-4-2003 | 锌和锌合金.化学分析.锌中铁含量的测定.分光光度法 | (Zinc and zinc alloys - Chemical analysis - Determination of iron in zinc alloys - Spectrophotometric method) |
BS EN 12441-5-2003 | 锌和锌合金.化学分析.锌中铁含量的测定.分光光度法 | (Zinc and zinc alloys - Chemical analysis - Determination of iron in primary zinc - Spectrophotometric method) |
BS EN 12441-6-2003 | 锌和锌合金.化学分析.铝及铁含量的测定.火焰原子吸收光谱测定法锌和锌合金.化学分析.铝和铁的测定.火焰原子 | (Zinc and zinc alloys - Chemical analysis - Determination of aluminium and iron - Flame atomic absorption spectrometric method) |
BS EN 12442-1-2000 | 医疗设备生产专用动物产品及其衍生物.风险分析和管理 | (Animal tissues and their derivatives utilized in the manufacture of medical devices - Analysis and management of risk) |
BS EN 12442-2-2000 | 医疗设备生产专用动物产品及其衍生物.来源控制、采集和处理 | (Animal tissues and their derivatives utilized in the manufacture of medical devices - Controls on sourcing, collection and handling) |
BS EN 12442-3-2000 | 医疗设备生产专用动物产品及其衍生物.病毒和传染性试剂消除和/或僵化的验证 | (Animal tissues and their derivatives utilized in the manufacture of medical devices - Validation of the elimination and/or inactivation of viruses and transmissible agents) |
BS EN 12444-2001 | 工业商业和车库门.对风载荷的抗性.试验和计算 | (Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation) |
BS EN 12445-2001 | 工业、商业和车库用门.动力操纵门的使用安全.试验方法 | (Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods) |
BS EN 12446-2003 | 烟囱.部件.混凝土外墙件 | (Chimneys - Components - Concrete outer wall elements) |
BS EN 12447-2001 | 土工织物及与土工织物相关的产品.测定在水中耐水解性的筛选试验方法 | (Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water) |
BS EN 12449-1999 | 铜和铜合金.一般用途无缝圆管 | (Copper and copper alloys - Seamless, round tubes for general purposes) |
BS EN 1245-1999 | 胶粘剂.PH值的测定.试验方法 | (Adhesives - Determination of pH - Test method) |
BS EN 12450-1999 | 铜和铜合金.毛细圆铜无缝管 | (Copper and copper alloys - Seamless, round copper capillary tubes) |
BS EN 12451-1999 | 铜和铜合金.热交换器用圆无缝管 | (Copper and copper alloys - Seamless, round tubes for heat exchangers) |
BS EN 12452-1999 | 铜和铜合金.热交换器用轧制翅片无缝管 | (Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers) |
BS EN 12453-2001 | 工业、商业和车库用门.动力操纵门的使用安全.要求 | (Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements) |
BS EN 12454-1998 | 铸造.表面非连续性的外观检验.钢砂型铸造 | (Founding - Visual examination of surface discontinuities - Steel sand castings) |
BS EN 12455-1999 | 弹性地板覆盖物.软木地板衬垫规范 | (Resilient floor coverings - Specification for corkment underlay) |
BS EN 12457-1-2002 | 废弃物特性.浸析.颗粒废弃物和污泥浸析的一致性试验.高固体含量和粒径小于4mm的材料在液体、固体比为2 l/kg | () |
BS EN 12457-2-2002 | 废弃物特性.浸析.颗粒废弃物和污泥浸析的一致性试验.高固体含量和粒径小于4mm的材料在液体、固体比为10 l/kg时的一级分批试验 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
BS EN 12457-3-2002 | 废弃物特性.浸析.颗粒废弃物和污泥浸析的一致性试验.高固体含量和粒径小于4mm的材料在液体、固体比为2 l/kg | () |
BS EN 12457-4-2002 | 废弃物特性.浸析.颗粒废弃物和污泥浸析的一致性试验.粒径小于10mm材料在液体、固体比为10 l/kg时的一级分批 | (Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle siz) |
BS EN 12458-1999 | 表面活性剂.硬水中适应性的测定 | (Surface active agents - Determination of stability in hard water) |
BS EN 1246-1998 | 胶粘剂.灰分和硫酸盐灰分测定 | (Adhesives - Determination of ash and sulfated ash) |
BS EN 12460-1998 | 生物技术.大规模加工和生产.根据生物危害选择和安装设备的指南 | (Biotechnology - Large-scale process and production - Guidance on equipment selection and installation in accordance with the biological risk) |
BS EN 12461-1998 | 生物技术.大规模加工和生产.废弃物处理、钝化和测试指南 | (Biotechnology - Large-scale process and production - Guidance for the handling, inactivating and testing of waste) |
BS EN 12462-1998 | 生物技术.泵性能标准 | (Biotechnology - Performance criteria for pumps) |
BS EN 12463-2004 | 食品加工机械.填充和辅助机器.安全和卫生要求 | |
BS EN 12463-2004 | 食品加工机械.填充和辅助机器.安全和卫生要求 | |
BS EN 12464-1-2003 | 光和照明.工作场所照明.室内工作场所 | (Light and lighting - Lighting of work places - Indoor work places) |
BS EN 12465-2002 | 架空线用木杆.耐久性要求 | (Wood poles for overhead lines - Durability requirements) |
BS EN 12466-1998 | 弹性地板覆盖物.词汇 | (Resilient floor coverings - Vocabulary) |
BS EN 12467-2000 | 纤维水泥平板材.产品规范和试验方法 | (Fibre-cement flat sheets - Product specifications and test methods) |
BS EN 12468-1998 | 生物技术.适应环境的改良生物体.遗传改良植物适应力检测战乱指南 | (Biotechnology - Modified organisms for application in the environment - Guidance for the monitoring strategies for deliberate releases of genetically modified plants) |
BS EN 12469-2000 | 生物技术.微生物安全箱的性能标准 | (Biotechnology - Performance criteria for microbiological safety cabinets) |
BS EN 1247-2004 | 铸造机械.铸勺、倾倒设备、离心铸造机、连续和半连续铸造机的安全要求 | |
BS EN 1247-2004 | 铸造机械.铸勺、倾倒设备、离心铸造机、连续和半连续铸造机的安全要求 | |
BS EN 1247-2004 | 铸造机械.铸勺、倾倒设备、离心铸造机、连续和半连续铸造机的安全要求 | |
BS EN 12470-1-2000 | 临床体温计.最大装置的金属玻璃中液体式体温计 | (Clinical thermometers - Metallic liquid-in-glass thermometers with maximum device) |
BS EN 12470-2-2001 | 临床体温计.相位变换式体温计(点矩阵) | (Clinical thermometers - Phase change type (dot matrix) thermometers) |
BS EN 12470-3-2000 | 临床体温计.最大装置的压缩式电气体温计(非预测式和预测式)的性能 | (Clinical thermometers - Performance of compact electrical thermometers (non-predictive and predictive) with maximum device) |
BS EN 12470-4-2001 | 临床体温计.连续测量用电子体温计的性能 | (Clinical thermometers - Performance of electrical thermometers for continuous measurement) |
BS EN 12470-5-2003 | 体温计.(大刻度的)耳蜗式红外测温计的性能 | (Clinical thermometers - Performance of infra-red ear thermometers (with maximum device)) |
BS EN 12472-1999 | 涂覆物中镍释放检测用腐蚀和磨损模拟方法 | (Method for the simulation of wear and corrosion for the detection of nickel release from coated items) |
BS EN 12473-2000 | 海水中阴极保护的一般原理 | (General principles of cathodic protection in sea water) |
BS EN 12474-2001 | 海底管道的阴极保护 | (Cathodic protection for submarine pipelines) |
BS EN 12475-1-1998 | 密度大的成型耐火产品分类.硅酸铝产品 | (Classification of dense shaped refractory products - Alumina-silica products) |
BS EN 12475-2-1998 | 密度大的成型耐火产品分类.包含有低于7%残留碳的基本产品 | (Classification of dense shaped refractory products - Basic products containing less than 7% residual carbon) |
BS EN 12475-3-1998 | 致密成型耐火产品分类.包含有7%-30%残留碳的基本产品 | (Classification of dense shaped refractory products - Basic products containing from 7% to 30% residual carbon) |
BS EN 12475-4-1999 | 致密成型耐火产品分类.特殊产品 | (Classification of dense shaped refractory products - Special products) |
BS EN 12476-2000 | 金属的磷酸盐转化涂层.特殊要求的方法 | (Phosphate conversion coatings of metals - Method of specifying requirements) |
BS EN 12477-2001 | 焊工用防护手套 | (Protective gloves for welders) |
BS EN 12478-2001 | 机床的安全.大型数控车床和车床顶尖 | (Safety of machine tools - Large numerically controlled turning machines and turning centres) |
BS EN 12479-2002 | 架空线用木杆.尺寸.测量方法和允许偏差 | (Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations) |
BS EN 1248-2001 | 铸造机械.喷砂设备的安全要求 | (Foundry machinery - Safety requirements for abrasive blasting equipment) |
BS EN 12480-2002 | 煤气表.旋转位移煤气表 | (Gas meters - Rotary displacement gas meters) |
BS EN 12481-2001 | 自粘带.术语 | (Self adhesive tapes - Terminology) |
BS EN 12482-1-1998 | 铝和铝合金.一般应用重轧备料.热轧重轧备料规范. | (Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for hot rolled reroll stock) |
BS EN 12482-2-1998 | 铝和铝合金.一般应用重轧备料.冷轧重轧备料规范. | (Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for cold rolled reroll stock) |
BS EN 12483-1999 | 液泵.带变频机的泵组件.保证性鉴定和相容性试验 | (Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests) |
BS EN 12484-1-1999 | 灌溉技术.自动草坪灌溉系统.业主对设备程序的测定 | (Irrigation techniques - Automatic turf irrigation systems - Definition of the programme of equipment by the owner) |
BS EN 12484-2-2000 | 灌溉技术.自动草坪灌溉系统.典型技术模板的设计和定义 | (Irrigation techniques - Automatic turf irrigation systems - Design and definition of typical technical templates) |
BS EN 12484-3-2000 | 灌溉技术.自动草坪灌溉系统.自动控制和系统管理 | (Irrigation techniques - Automatic turf irrigation systems - Automatic control and system management) |
BS EN 12484-4-2002 | 灌溉技术.自动草坪灌溉系统.设备和测试方法 | (Irrigation techniques - Automatic turf irrigation systems - Installation and acceptance) |
BS EN 12484-5-2002 | 灌溉技术.自动草坪灌溉系统.系统测试方法 | (Irrigation techniques - Automatic turf irrigation systems - Testing methods of systems) |
BS EN 12485-2001 | 人类饮用水处理用化学品.碳酸钙、高生石灰和半煅烧白云石.试验方法 | (Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime and half-burnt dolomite - Test methods) |
BS EN 12487-2000 | 金属的腐蚀防护.经清洗和没有清洗的铝及铝合金上的铬酸盐转化涂层 | (Corrosion protection of metals - rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys) |
BS EN 12489-2000 | 工业、商业和汽车用门.耐水渗透特性.试验方法 | (Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method) |
BS EN 12490-1999 | 木材和木材制品的持久性.保存处理固体木材.保存和处理木材中杂酚油保留和穿透的测定 | (Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood) |
BS EN 12491-2001 | 滑翔降落设备.紧急降落伞.安全要求和试验方法 | (Paragliding equipment - Emergency parachutes - Safety requirements and test methods) |
BS EN 12492-2000 | 登山设备.登山者头盔.安全要求和试验方法 | (Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods) |
BS EN 12493-2001 | 液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产 | (Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture) |
BS EN 12495-2000 | 近海工程固定钢结构的阴极保护 | (Cathodic protection for fixed steel offshore structures) |
BS EN 12499-2003 | 金属结构的内部阴极保护 | (Internal cathodic protection of metallic structures) |
BS EN 125-1991 | 燃气器具用火焰控制器规范.热电型 | (Specification for flame supervision devices for gas-burning appliances - Thermo-electric types) |
BS EN 12500-2000 | 金属材料的防腐蚀.大气环境下的腐蚀概率.大气环境腐蚀性的分类、测定和评估 | (Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments) |
BS EN 125000-1998 | 电子器件质量评定协调系统.一般规范:铁氧体材料制磁芯 | (Harmonized system of quality assessment for electronic components - Generic specification: cores made of ferrite materials) |
BS EN 12501-1-2003 | 金属材料的防腐蚀.土壤中腐蚀可能性.总则 | (Protection of metallic materials against corrosion - Corrosion likelihood in soil - General) |
BS EN 12501-2-2003 | 金属材料的防腐蚀.土壤中腐蚀可能性.低合金和非合金黑色金属材料 | (Protection of metallic materials against corrosion - Corrosion likelihood in soil - Low alloyed and non alloyed ferrous materials) |
BS EN 12503-1-2001 | 运动垫.体操运动垫.安全要求 | (Sports mats - Gymnastic mats, safety requirements) |
BS EN 12503-2-2001 | 运动垫.撑杆跳和跳高垫安全要求 | (Sports mats - Pole vault and high jump mats, safety requirements) |
BS EN 12503-3-2001 | 运动垫.柔道垫安全要求 | (Sports mats - Judo mats, safety requirements) |
BS EN 12503-4-2001 | 运动垫.减震性的测定 | (Sports mats - Determination of shock absorption) |
BS EN 12503-5-2001 | 运动垫.基本摩擦的测定 | (Sports mats - Determination of the base friction) |
BS EN 12503-6-2001 | 运动垫.顶摩擦的测定 | (Sports mats - Determination of the top friction) |
BS EN 12503-7-2001 | 运动垫.静态硬挺度的测定 | (Sports mats - Determination of static stiffness) |
BS EN 12504-1-2000 | 施工用试验混凝土.芯样.压缩过程中的携带,检验和试验 | (Testing concrete in structures - Cored specimens - Taking, examining and testing in compression) |
BS EN 12504-2-2001 | 结构中的混凝土试验.无损检验.回弹数的测定 | (Testing concrete in structures - Non-destructive testing - Determination of rebound number) |
BS EN 12504-3-2005 | 结构中的试验混凝土.拉出力的测定 | |
BS EN 12504-4-2004 | 结构物中的试验混凝土.超声波脉冲速率的测定 | |
BS EN 12505-2000 | 食品加工机械.食用油和油脂处理用离心机.安全和卫生要求 | (Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements) |
BS EN 12506-2003 | 废弃物特征.提取物分析.pH, As, Ba, Cd, Cl(上标-), Co, Cr, Cr VI, Cu, Mo, Ni, NO(下标2)(上标-), Pb, 总 | (Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, ClUP-, Co, Cr, Cr VI, Cu, Mo, Ni, NODOWN2UP-, Pb, total S, SODOWN4UP2UP-, V and Zn) |
BS EN 12507-2000 | 运输服务.用于道路运输,储藏和配送工业的EN ISO 9002应用的指导性说明 | (Transportation services - Guidance notes on the application of EN ISO 9002 to the road transport, storage and distribution industries) |
BS EN 12508-2000 | 金属和合金的腐蚀保护.表面处理,金属和其它无机涂层.词汇 | (Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary) |
BS EN 12509-2002 | 架空线用木杆.试验方法.弹性模量、粘结强度、密度和含水量的测定 | (Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content) |
BS EN 1251-1-2000 | 低温容器.不超过1000升容积的可移动真空绝热容器.基本要求 | (Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Fundamental requirements) |
BS EN 1251-2-2000 | 低温容器.不超过1000升容积的可移动真空绝热容器.设计、制造、检验和试验 | (Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Design, fabrication, inspection and testing) |
BS EN 1251-3-2000 | 低温容器.不超过1000升容积的可移动真空绝热容器.操作要求 | (Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Operational requirements) |
BS EN 12510-2002 | 架空线用木杆.强度分级标准 | (Wood poles for overhead lines - Strength grading criteria) |
BS EN 125100-1977 | 电子器件质量评定协调体系.分规范:电感器用磁性氧化铁芯 | (Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for inductor applications) |
BS EN 12511-2002 | 架空线用木杆.特征值的测定 | (Wood poles for overhead lines - Determination of characteristic values) |
BS EN 12512-2002 | 木结构.试验方法.机械紧固件接头的循环试验 | (Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners) |
BS EN 12513-2000 | 铸造.铸铁的耐磨损性 | (Founding - Abrasion resistant cast irons) |
BS EN 12514-1-2000 | 油燃烧器供油系统的安装.安全要求和试验.部件、供油泵、控制和安全装置、供油罐 | (Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks) |
BS EN 12514-2-2000 | 油燃烧器供油系统的安装.安全要求和试验.部件、阀门、管道、过滤器、油空气分离器、油量计 | (Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters) |
BS EN 12515-1997 | 热环境.利用要求湿度的计算对热应力的分析测定和说明 | (Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate) |
BS EN 12516-2-2004 | 阀门.外壳设计强度.钢制阀门外壳的计算方法 | |
BS EN 12516-3-2002 | 阀门.外壳设计强度.实验方法 | (Valves - Shell design strength - Experimental method) |
BS EN 12517-1998 | 焊接的无损检验.焊接接头的放射性检验.验收等级 | (Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels) |
BS EN 12518-2000 | 人类饮用水处理用化学品.高钙石灰 | (Chemicals used for treatment of water intended for human consumption - High-calcium lime) |