    
|
| 编号 | 中文名称 | 英文名称 |
| BS EN 10152-2003 | 电镀锌冷轧扁平钢轧材.技术交货条件 | (Electrolytically zinc coated cold rolled steel flat products - Technical delivery conditions) |
| BS EN 10154-2002 | 连续热浸铝硅(AS)涂覆钢条和钢板.交货技术条件 | (Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions) |
| BS EN 10155-1993 | 改进的抗大气腐蚀的结构钢.交货条件 | (Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions) |
| BS EN 10160-1999 | 厚度等于或大于6mm的钢板制品的超声检验(反射法) | (Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)) |
| BS EN 10162-2003 | 冷轧钢型材.交货技术条件.尺寸和横截面公差 | (Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances) |
| BS EN 10163-1-1991 | 热轧钢板材、宽扁材和型材表面条件供货要求规范.第1部分:一般要求 | (Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - General requirements) |
| BS EN 10163-1-2004 | 热轧钢板材、宽扁材和型材表面条件交货要求.一般要求 | |
| BS EN 10163-2-1991 | 热轧钢制品表面状态的供货条件(薄板.宽扁钢和异型钢).第2部分:薄板和宽扁钢 | (Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Plates and wide flats) |
| BS EN 10163-2-2004 | 热轧钢板材、宽扁材和型材表面条件交货要求.板材和宽扁材 | |
| BS EN 10163-3-1991 | 热轧钢制品表面状态的供货条件(薄板.宽扁钢和异型钢)规范.第3部分:异型钢 | (Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Sections) |
| BS EN 10163-3-2004 | 热轧钢板材、宽扁材和型材表面条件交货要求.型材 | |
| BS EN 10164-1993 | 产品表面垂直变形特性改进的钢产品.交货技术条件 | (Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions) |
| BS EN 10165-1996 | 非最终退火状态下合金钢制冷轧电工钢片和钢带 | (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state) |
| BS EN 10168-2004 | 钢产品.检查文件.信息和描述表 | |
| BS EN 10169-1-1997 | 连续有机涂层(盘绕涂层)钢板制品.一般信息(定义,材料,公差,测试方法) | (Continuously organic coated (coil coated) steel flat products - General information (definitions, materials, tolerances, test methods)) |
| BS EN 10169-1-2004 | 连续有机涂覆(盘绕涂覆)的扁钢制品.一般信息(定义、材料、公差、测试方法) | |
| BS EN 10169-3-2003 | 连续有机涂层(盘绕涂层)变平钢轧材.建筑物内部用品 | (Continuously organic coated (coil coated) steel flat products - Products for building interior applications) |
| BS EN 1017-1998 | 饮用水处理用化学物质.半烧的白云石 | (Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite) |
| BS EN 1018-1998 | 饮用水处理用化学物质.碳化钙 | (Chemicals used for treatment of water intended for human consumption - Calcium carbonate) |
| BS EN 10184-1992 | 黑色金属材料化学分析规范.钢铁中磷的测定.分光光度测定法 | (Specification for chemical analysis of ferrous materials - Determination of phosphorus in steels and irons - Spectrophotometric method) |
| BS EN 1019-1996 | 人员用水的化学处理.二氧化硫 | (Chemicals used for treatment of water intended for human consumption - Sulfur dioxide) |
| BS EN 1020-1998 | 与燃气和/或燃烧产物的辅助传输设备联合使用的空间加热净加热输入功率不超过300KW的非家用燃气强制对流空气 | (Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion produc) |
| BS EN 10200-1992 | 黑色金属材料化学分析方法.用分光光度法测定钢中的硼 | (Chemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometric method) |
| BS EN 10202-2001 | 冷缩电解铬产品.电解锡板和电解铬氧化涂层钢 | (Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel) |
| BS EN 10204-1991 | 冶金产品.检验文件型式 | (Metallic products - Types of inspection documents) |
| BS EN 10204-2004 | 金属产品.检验文件的类型 | |
| BS EN 10205-1992 | 生产镀锡薄钢板或镀镍铬氧化层钢板用冷轧黑色成卷薄钢板 | (Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel) |
| BS EN 10207-1992 | 简单压力容器用钢材、板材、带材和棒材供货技术条件 | (Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars) |
| BS EN 10208-1-1998 | 可燃性液体管线钢管.技术提交条件.A级要求管 | (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class A) |
| BS EN 10208-2-1997 | 可燃流体用钢管.技术交付条件.B级管要求 | (Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class B) |
| BS EN 10209-1996 | 搪瓷用的冷轧低碳钢板制品.交货技术条件 | (Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions) |
| BS EN 1021-1-1994 | 家具.装饰家具着火性的评估.火源:燃着的香烟 | (Furniture - Assessment of the ignitability of upholstered furniture - Ignition source: smouldering cigarette) |
| BS EN 1021-2-1994 | 家具.装饰家具着火性的评估.火源:等同于火柴的煤气火焰 | (Furniture - Assessment of the ignitability of upholstered furniture - Ignition source: match flame equivalent) |
| BS EN 10210-1-1994 | 非合金及精粒结构钢的热轧空心型材.交货技术条件 | (Hot finished structural hollow sections of non-alloy and fine grain structural steels - Technical delivery requirements) |
| BS EN 10210-2-1997 | 精粒结构钢和非合金热轧空心型材.公差,尺寸和部分特性 | (Hot finished structural hollow sections of non-alloy and fine grain structural steels - Tolerances, dimensions and sectional properties) |
| BS EN 10211-1996 | 钢铁材料的化学分析.钢和铁中钛含量测定.火焰原子吸收光谱测定法 | (Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method) |
| BS EN 10212-1996 | 生铁材料的化学分析.用分光光度法测定钢和铁中的砷含量 | (Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method) |
| BS EN 10213-1-1996 | 压力用途的钢铸件交货技术条件.概述 | (Technical delivery conditions for steel castings for pressure purposes - General) |
| BS EN 10213-2-1996 | 压力用途的钢铸件的交货技术条件.第2部分:环境温度和高温下使用的钢种 | (Technical delivery conditions for steel castings for pressure purposes - Steel grades for use at room temperature and at elevated temperature) |
| BS EN 10213-3-1996 | 压力用途的钢铸件交货技术条件.低温下使用的钢 | (Technical delivery conditions for steel castings for pressure purposes - Steels for use at low temperatures) |
| BS EN 10213-4-1996 | 压力用途的钢铸件的交货技术条件.第4部分:奥氏体和奥氏体-铁素体钢种 | (Technical delivery conditions for steel castings for pressure purposes - Austenitic and austenitic-ferritic steel grades) |
| BS EN 10214-1995 | 连续热浸镀锌铝薄钢板和钢带.交货技术条件 | (Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions) |
| BS EN 10215-1995 | 连续热浸镀铝锌薄钢板和钢带.交货技术条件 | (Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions) |
| BS EN 10216-1-2002 | 压力无缝钢管.交货技术条件.规定室温特性的非合金钢管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties) |
| BS EN 10216-2-2002 | 压力无缝钢管.交货技术条件.规定高温特性的非合金和合金钢管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties) |
| BS EN 10216-3-2002 | 压力无缝钢管.交货技术条件.合金细粒钢管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes) |
| BS EN 10216-4-2002 | 压力无缝钢管.交货技术条件.规定低温特性的非合金和合金钢管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified low temperature properties) |
| BS EN 10216-5-2004 | 压力无缝钢管.交货技术条件.无缝钢管 | |
| BS EN 10217-1-2002 | 压力焊接钢管.交货技术条件.规定室温特性的非合金钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties) |
| BS EN 10217-2-2002 | 压力焊接钢管.交货技术条件.规定高温特性的非合金和合金电焊钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties) |
| BS EN 10217-3-2002 | 压力焊接钢管.交货技术条件.合金细粒钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes) |
| BS EN 10217-4-2002 | 压力焊接钢管.交货技术条件.规定低温特性的非合金和合金电焊钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties) |
| BS EN 10217-5-2002 | 压力焊接钢管.交货技术条件.规定高温特性的非合金和合金埋弧焊接钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10217-6-2002 | 压力焊接钢管.交货技术条件.规定低温特性的非合金埋弧焊接钢管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties) |
| BS EN 10218-1-1994 | 钢丝和线材制品.概述.试验方法 | Steel wire and wire products - General - Test methods |
| BS EN 10218-2-1997 | 钢丝和线材制品.概述.线材尺寸和公差 | Steel wire and wire products - General - Wire dimensions and tolerances |
| BS EN 10219-1-1997 | 精粒结构钢和非合金冷型焊接结构型材.技术提交要求 | Cold formed welded structural sections of non-alloy and fine grain steels - Technical delivery requirements |
| BS EN 10219-2-1997 | 精粒结构钢和非合金冷型焊接结构型材.公差,尺寸和部分特性 | Cold formed welded structural sections of non-alloy and fine grain steels - Tolerances, dimensions and sectional properties |
| BS EN 1022-1997 | 居室家具.坐椅稳定性的测试 | Domestic furniture - Seating - Determination of stability |
| BS EN 1022-2005 | 居室家具.座椅.稳定性测定 | |
| BS EN 10220-2002 | 无缝和焊接钢管.尺寸和每单位长度的质量 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| BS EN 10221-1996 | 热轧圆棒材和线材的表面质量的分类.交货技术条件 | Specification for surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| BS EN 10222-1-1998 | 压力容器用钢锻件.敞口铸模锻件的一般要求 | Steel forgings for pressure purposes - General requirements for open die forgings |
| BS EN 10222-2-2000 | 压力容器用钢锻件.具有特殊提高温度特性的铁素体钢和马口铁钢 | Steel forgings for pressure purposes - Ferritic and martensitic steels with specified elevated temperature properties |
| BS EN 10222-3-1999 | 压力容器用钢锻件.具有特定低温特性的镍钢 | Steel forgings for pressure purposes - Nickel steels with specified low-temperature properties |
| BS EN 10222-4-1999 | 压力容器用钢锻件.具有高验收强度的可焊精粒钢 | Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength |
| BS EN 10222-5-2000 | 压力容器用钢锻件.马口铁钢,奥氏体钢,奥氏体-铁素体不锈钢 | (Steel forgings for pressure purposes - Martensitic, austenitic and austenitic-ferritic stainless steels) |
| BS EN 10223-1-1998 | 栏栅用钢线和金属线制品.锌和锌合金包覆的刺钢丝线 | Steel wire and wire products for fences - Zinc and zinc alloy coated steel barbed wire |
| BS EN 10223-2-1998 | 栏栅用钢线和金属线制品.农业,绝缘和栏栅用六角型钢丝网 | Steel wire and wire products for fences - Hexagonal steel wire netting for agricultural, insulation and fencing purposes |
| BS EN 10223-3-1998 | 栏栅用钢线和金属线制品.工程用六角型钢丝网 | Steel wire and wire products for fences - Hexagonal steel wire netting for engineering purposes |
| BS EN 10223-4-1998 | 栅栏用钢丝和钢丝制品.钢丝焊接网式栅栏 | Steel wire and wire products for fences - Steel wire welded mesh fencing |
| BS EN 10223-5-1998 | 栅栏用钢丝和钢丝制品.钢丝编织绞接和打结网式栅栏 | Steel wire and wire products for fences - Steel wire woven hinged joint and knotted mesh fencing |
| BS EN 10223-6-1998 | 栅栏用钢线和线制品.钢线链栅栏的测定 | Steel wire and wire products for fences - Steel wire chain link fencing |
| BS EN 10223-7-2002 | 栏栅用钢丝和金属丝制品.栏栅用焊接钢丝钢条 | Steel wire and wire products for fences - Steel wire welded panels - For fencing |
| BS EN 10224-2002 | 包括生活用水在内的水成液的输送用非合金钢管和配件.交货技术条件 | (Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions) |
| BS EN 10225-2001 | 固定近海结构的可焊接结构钢.技术提交条件 | (Weldable structural steels for fixed offshore structures - Technical delivery conditions) |
| BS EN 10226-1-2004 | 螺纹上有压力密封接缝的管螺纹.锥形外螺纹和平行内螺纹.尺寸、公差及名称与符号 | |
| BS EN 10226-1-2004 | 螺纹上有压力密封接缝的管螺纹.锥形外螺纹和平行内螺纹.尺寸、公差及名称与符号 | |
| BS EN 10228-1-1999 | 钢锻件的无损检验.磁粉检验 | (Non-destructive testing of steel forgings - Magnetic particle inspection) |
| BS EN 10228-2-1998 | 钢锻件的无损检验.渗透检验 | (Non-destructive testing of steel forgings - Penetrant testing) |
| BS EN 10228-3-1998 | 钢锻件的无损检验.铁素体或马氏体钢锻件的超声检验 | (Non-destructive testing of steel forgings - Ultrasonic testing of ferritic or martensitic steel forgings) |
| BS EN 10228-4-1999 | 钢锻件的无损检验.奥氏体和奥氏体-铁素体不锈钢锻件的超声检验 | (Non-destructive testing of steel forgings - Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings) |
| BS EN 10229-1998 | 钢产品耐氢诱发断裂(HIC)的评估 | (Evaluation of resistance of steel products to hydrogen induced cracking (HIC)) |
| BS EN 1023-1-1997 | 办公家具.遮板.尺寸 | (Office furniture - Screens - Dimensions) |
| BS EN 1023-2-2000 | 办公家具.遮板.机械安全要求 | (Office furniture - Screens - Mechanical safety requirements) |
| BS EN 1023-3-2000 | 办公家具.遮板.试验方法 | (Office furniture - Screens - Test methods) |
| BS EN 10230-1-2000 | 钢圆铁钉.一般应用的松动钉 | (Steel wire nails - Loose nails for general applications) |
| BS EN 10232-1994 | 金属材料.整截面管材弯曲试验 | (Metallic materials - Tube (in full section) - Bend test) |
| BS EN 10233-1994 | 金属材料.管材.压扁试验 | (Metallic materials - Tube - Flattening test) |
| BS EN 10234-1994 | 金属材料.管材.管流延伸试验 | Metallic materials - Tube - Drift expanding test |
| BS EN 10235-1994 | 金属材料.管材.突边试验 | (Metallic materials - Tube - Flanging test) |
| BS EN 10236-1994 | 金属材料.管材.环形管扩管试验 | (Metallic materials - Tube - Ring expanding test) |
| BS EN 10237-1994 | 金属材料.管材.环形管拉伸试验 | (Metallic materials - Tube - Ring tensile test) |
| BS EN 10238-1997 | 自动喷砂清理和自动涂底漆结构钢制品 | (Automatically blast cleaned and automatically primed structural steel products) |
| BS EN 1024-1997 | 间断敷设用粘土制屋面瓦.几何性能测定 | (Clay roofing tiles for discontinuous laying - Determination of geometric characteristics) |
| BS EN 10240-1998 | 钢管内或外保护覆层.用于自动车间的热浸电动覆膜规范 | (Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants) |
| BS EN 10241-2000 | 螺纹钢管配件 | (Steel threaded pipe fittings) |
| BS EN 10242-1995 | 可锻铸铁的加螺纹管道配件 | (Threaded pipe fittings in malleable cast iron) |
| BS EN 10243-1-1999 | 钢模锻.公差和尺寸.落锤或垂直压力锻造 | (Steel die forgings - Tolerances on dimensions - Drop and vertical press forgings) |
| BS EN 10243-2-1999 | 钢模锻.公差和尺寸.水平锻压机器上的镦锻压 | (Steel die forgings - Tolerances on dimensions - Upset forgings made on horizontal forging machines) |
| BS EN 10244-1-2001 | 钢线和线产品.钢线上的非有色金属涂层.一般原理 | (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles) |
| BS EN 10244-2-2001 | 钢线和线产品.钢线上的非有色金属涂层.锌和锌合金涂层 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc alloy coatings |
| BS EN 10244-3-2001 | 钢线和线产品.钢线上的非有色金属涂层.铝涂层 | (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Aluminium coatings) |
| BS EN 10244-4-2001 | 钢线和线产品.钢线上的非有色金属涂层.锡涂层 | (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Tin coatings) |
| BS EN 10244-5-2001 | 钢线和线产品.钢线上的非有色金属涂层.镍涂层 | (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Nickel coatings) |
| BS EN 10244-6-2001 | 钢线和线产品.钢线上的非有色金属涂层.铜,青铜或黄铜涂层 | (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Copper, bronze or brass coatings) |
| BS EN 10245-1-2001 | 钢线和线产品.钢线上的有机涂层.一般规则 | (Steel wire and wire products - Organic coatings on steel wire - General rules) |
| BS EN 10245-2-2001 | 钢线和线产品.钢线上的有机涂层.PVC精制线 | (Steel wire and wire products - Organic coatings on steel wire - PVC finished wire) |
| BS EN 10245-3-2001 | 钢线和线产品.钢线上的有机涂层.PE涂层线 | (Steel wire and wire products - Organic coatings on steel wire - PE coated wire) |
| BS EN 10245-4-2003 | 钢丝和钢丝产品.钢丝上的有机涂层.聚酯涂层丝 | (Steel wire and wire products - Organic coatings on steel wire - Polyester coated wire) |
| BS EN 10246-1-1996 | 钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 | (Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness) |
| BS EN 10246-10-2000 | 钢管的无损检验.缺陷探测用自动熔融电弧焊接钢管焊缝的放射线检验 | (Non-destructive testing of steel tubes - Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections) |
| BS EN 10246-11-2000 | 钢管的无损检测.表面缺陷检测用无缝和焊接钢管的液体渗透试验 | (Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections) |
| BS EN 10246-12-2000 | 钢管的无损检测.表面缺陷检测用无缝和焊接钢管的磁粉检测 | (Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections) |
| BS EN 10246-13-2000 | 钢管的无损检测.无缝和焊接钢管(埋弧焊除外)的全自动外围超声波厚度检测 | Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
| BS EN 10246-14-2000 | 钢管的无损检验.层状缺陷探测用无缝和焊接(埋弧焊接除外)钢管的自动超声检验 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| BS EN 10246-15-2000 | 钢管的无损检测.无缝和焊接钢管(埋弧焊除外)的全自动外围超声波厚度检测 | (Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections) |
| BS EN 10246-16-2000 | 钢管的无损检验.层状缺陷探测用调节到焊接钢管焊缝区域的自动超声波检验 | (Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections) |
| BS EN 10246-17-2000 | 钢管的无损检验.层状缺陷探测用无缝和焊接钢管管端部的超声波检验 | (Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections) |
| BS EN 10246-18-2000 | 钢管的无损检验.层状缺陷探测用无缝和焊接铁磁钢管管端部的磁粉检验 | (Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections) |
Copyright © 2008 Worldwide Translation.
宽天下翻译公司版权所有.Tel:010-83345348
