编号 | 中文名称 | 英文名称 |
BS EN 10246-2-2000 | 钢管的无损检测.验证水密封性用无缝和焊接的(埋弧焊除外)奥氏体铁素体钢管的自动涡流试验 | (Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydrauli) |
BS EN 10246-3-2000 | 钢管的无损检验.缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动涡流试验 | (Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections) |
BS EN 10246-4-2000 | 钢管的无损检验.横向缺陷探测用无缝铁磁性钢管自动全周界磁化换能器/流量渗漏试验 | (Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections) |
BS EN 10246-5-2000 | 钢管的无损检验.径向缺陷探测用无缝和焊接(埋弧焊除外)的铁磁性钢管自动全周界磁化换能器/流量渗漏试验 | (Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detec) |
BS EN 10246-6-2000 | 钢管的无损检验.横向缺陷探测用无缝钢管自动全周界超声检验 | (Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections) |
BS EN 10246-7-1996 | 钢管的无损检测.第7部分:证明长度误差用整个管圆周上无缝和焊接铁磁钢管(埋弧焊除外)的自动超声波检验 | (Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections) |
BS EN 10246-8-2000 | 钢管的无损试验.径向缺陷探测用电焊钢管焊缝的自动超声试验 | (Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections) |
BS EN 10246-9-2000 | 钢管的无损检测.检测纵向或横向缺陷用焊接和埋弧焊钢管的自动超声波检测 | (Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections) |
BS EN 10248-1-1996 | 非合金钢制热轧板桩.第1部分:交货技术条件 | (Hot rolled sheet piling of non alloy steels - Technical delivery conditions) |
BS EN 10248-2-1996 | 非合金钢制热轧板桩.第2部分:极限尺寸和外形公差 | (Hot rolled sheet piling of non alloy steels - Tolerances on shape and dimensions) |
BS EN 10249-1-1996 | 非合金钢制冷成型板桩.第1部分:交货技术条件 | (Cold formed sheet piling of non alloy steels - Technical delivery conditions) |
BS EN 10249-2-1996 | 非合金钢制冷成型板桩.第2部分:极限尺寸和外形公差 | (Cold formed sheet piling of non alloy steels - Tolerances on shape and dimensions) |
BS EN 10250-1-1999 | 一般工程用途的敞口钢模锻件.一般要求 | (Open steel die forgings for general engineering purposes - General requirements) |
BS EN 10250-2-2000 | 一般工程用途的敞口钢模锻件.非合金质量特殊钢 | (Open steel die forgings for general engineering purposes - Non-alloy quality and special steels) |
BS EN 10250-3-2000 | 一般工程用途的敞口钢模锻件.合金特殊钢 | (Open steel die forgings for general engineering purposes - Alloy special steels) |
BS EN 10250-4-2000 | 一般工程用途的敞口钢模锻件.不锈钢 | (Open steel die forgings for general engineering purposes - Stainless steels) |
BS EN 10251-1997 | 磁性材料.测定电工钢片和电工钢带几何特性值的方法 | (Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip) |
BS EN 10252-1997 | 磁性物质.以中频测量磁钢薄板和带材磁性能的方法 | (Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies) |
BS EN 10253-1-1999 | 对接焊管道配件.一般用途和无特殊检验要求的锻制碳钢 | (Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements) |
BS EN 10254-1999 | 钢封闭模锻件.一般技术提交条件 | (Steel closed die forgings - General technical delivery conditions) |
BS EN 10255-2004 | 焊接或加螺纹的非合金钢管.交货技术条件 | |
BS EN 10255-2004 | 焊接和加螺纹的非合金钢管.交货技术条件 | |
BS EN 10256-2000 | 钢管的无损检验.1级和2级无损检验师的资格及能力 | (Non-destructive testing on steel tubes - Qualification and competence of level 1 and level 2 non-destructive testing personnel) |
BS EN 10257-1-1998 | 电力电缆或通信电缆铠装用镀锌或锌合金非合金钢丝.地面电缆 | (Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Land cables) |
BS EN 10257-2-1998 | 电力电缆或通信电缆铠装用锌或锌合金涂覆非合金钢丝.海底电缆 | (Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Submarine cables) |
BS EN 10258-1997 | 冷轧不锈钢窄带材和剪切长度.尺寸和外形公差 | (Cold-rolled stainless steel narrow strip and cut lengths - Tolerances on dimensions and shape) |
BS EN 10259-1997 | 冷轧不锈钢和耐热钢宽带材,中厚板与薄板.尺寸和外形公差 | (Cold-rolled stainless and heat resisting steel wide strip and plate/sheet - Tolerances on dimensions and shape) |
BS EN 1026-2000 | 门窗.透气率.试验方法 | (Windows and doors - Air permeability - Test method) |
BS EN 10263-1-2001 | 冷加工和冷挤压的钢棒,棍和线.一般交货技术条件 | (Steel rod, bars and wire for cold heading and cold extrusion - General technical delivery conditions) |
BS EN 10263-2-2001 | 冷加工和冷挤压的钢棒,棍和线.一般交货技术条件.冷处理后不用于热处理的钢 | (Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for steels not intended for heat treatment after cold working) |
BS EN 10263-3-2001 | 冷加工和冷挤压的钢棒,棍和线.一般交货技术条件.表面硬化钢 | (Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for case hardening steels) |
BS EN 10263-4-2001 | 冷加工和冷挤压的钢棒,棍和线.淬火和回火钢的一般交货技术条件. | (Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for steels for quenching and tempering) |
BS EN 10263-5-2001 | 冷加工和冷挤压的钢棒,棍和线.不锈钢的交货技术条件 | (Steel rod, bars and wire for cold heading and cold extrusion - Technical delivery conditions for stainless steels) |
BS EN 10264-1-2002 | 钢丝和钢丝产品.绳索用钢丝.一般要求 | (Steel wire and wire products - Steel wire for ropes - General requirements) |
BS EN 10264-2-2002 | 钢丝和钢丝产品.绳索用钢丝.一般绳索用的冷拉非合金钢丝 | (Steel wire and wire products - Steel wire for ropes - Cold drawn non alloy steel wire for ropes for general applications) |
BS EN 10264-3-2002 | 钢丝和钢丝产品.绳索用钢丝.重型装置用圆形和异型非合金钢丝 | (Steel wire and wire products - Steel wire for ropes - Round and shaped non alloyed steel wire for high duty applications) |
BS EN 10264-4-2002 | 钢丝和钢丝产品.绳索用钢丝.不锈钢丝 | (Steel wire and wire products - Steel wire for ropes - Stainless steel wire) |
BS EN 10265-1996 | 磁性材料.薄板材和带材的机械特性和磁导率的规范 | (Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability) |
BS EN 10266-2003 | 钢管、配件和结构空心型材.产品标准中术语的符号和定义 | (Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards) |
BS EN 10267-1998 | 热加工温度下沉淀硬化用铁素体-珠光体钢 | (Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures) |
BS EN 10268-1999 | 由冷成型高弯曲强度微合金钢制造的冷轧平板制品.一般提交条件 | (Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions) |
BS EN 10269-1999 | 规定高温和/或低温性能的紧固件用钢及镍合金 | (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties) |
BS EN 1027-2000 | 门窗.水密性.试验方法 | (Windows and doors - Watertightness - Test method) |
BS EN 10270-1-2001 | 金属弹簧用钢线.获得专利的冷拉伸非合金弹簧钢线 | (Steel wire for mechanical springs - Patented cold drawn unalloyed spring steel wire) |
BS EN 10270-2-2001 | 机械弹簧钢线.油硬化和回火的弹簧钢线 | (Steel wire for mechanical springs - Oil hardened and tempered spring steel wire) |
BS EN 10270-3-2001 | 机械弹簧钢线.不锈钢弹簧钢线 | (Steel wire for mechanical springs - Stainless spring steel wire) |
BS EN 10271-1999 | 电镀锌镍涂覆钢平板制品.技术提交条件 | (Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions) |
BS EN 10272-2000 | 压力装置用不锈钢棒材 | (Stainless steel bars for pressure purposes) |
BS EN 10273-2000 | 有特定高温性能的压力装置用热轧可焊接钢棒 | (Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties) |
BS EN 10274-1999 | 金属材料.失落重力撕裂试验 | (Metallic materials - Drop weight tear test) |
BS EN 10275-1999 | 金属材料.管形环水压试验 | (Metallic materials - Tube ring hydraulic pressure test) |
BS EN 10276-1-2000 | 铁素体材料的化学分析.钢铁中氧的含量测定.氧测定用钢样品的抽样和制备 | (Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Sampling and preparation of steel samples for oxygen determination) |
BS EN 10276-2-2003 | 钢铁材料的化学分析.钢和铁中氧的含量测定.在惰性气体中熔解后红外法 | (Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Infrared method after fusion under inert gas) |
BS EN 10277-1-1999 | 光亮钢产品.技术提交条件.总则 | (Bright steel products - Technical delivery conditions - General) |
BS EN 10277-2-1999 | 光亮钢产品.技术提交条件.一般工程用途钢 | (Bright steel products - Technical delivery conditions - Steels for general engineering purposes) |
BS EN 10277-3-1999 | 光亮钢产品.技术提交条件.自由切割钢 | (Bright steel products - Technical delivery conditions - Free cutting steels) |
BS EN 10277-4-1999 | 光亮钢产品.技术交货条件.表面硬化钢 | (Bright steel products - Technical delivery conditions - Case-hardening steels) |
BS EN 10277-5-1999 | 光亮钢产品.技术提交条件.淬火和回火钢 | (Bright steel products - Technical delivery conditions - Steels for quenching and tempering) |
BS EN 10278-1999 | 光亮钢产品的尺寸和公差 | (Dimensions and tolerances of bright steel products) |
BS EN 10279-2000 | 热轧钢槽.质量,尺寸,形状公差 | (Hot rolled steel channels - Tolerances on shape, dimension and mass) |
BS EN 1028-1-2002 | 消防泵.起动注油消防离心泵.分类.总则和安全要求 | (Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Classification - General and safety requirements) |
BS EN 1028-2-2002 | 消防泵.带primer消防离心泵.一般验证和安全要求 | (Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Verification of general and safety requirements) |
BS EN 10280-2001 | 磁性材料.通过单片试验片对电气片和带的磁性能测量的方法 | (Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester) |
BS EN 10282-2001 | 磁性材料.电气片和带的表面绝缘性能测定的试验方法 | (Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip) |
BS EN 10283-1999 | 腐蚀抗性钢铸件 | (Corrosion resistant steel castings) |
BS EN 10288-2002 | 岸上和近海管线用钢管及配件.外部双层挤压聚乙烯基涂层 | (Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings) |
BS EN 10289-2002 | 岸上和海中管线用钢管和配件.外用环氧树脂及环氧树脂修饰层 | (Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings) |
BS EN 10290-2002 | 岸上和海底输油管用钢管和配件.用于外部液体的聚氨酯和改进型聚氨酯脂涂层 | (Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings) |
BS EN 10291-2000 | 金属材料.拉伸同轴蠕变试验.试验方法 | (Metallic materials - Uniaxial creep testing in tension - Methods of test) |
BS EN 10292-2000 | 冷成型用高屈服强度的连续热浸镀锌钢带材和薄板.交货技术条件 | (Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions) |
BS EN 10295-2002 | 耐热钢铸件 | (Heat resistant steel castings) |
BS EN 10296-1-2003 | 机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管 | (Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes) |
BS EN 10297-1-2003 | 机械和工程通用无密封环形钢管.技术交货条件.非合金和合金钢管 | (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes) |
BS EN 10301-2003 | 岸上及海底管道用钢管及配件.非腐蚀性气体的输送用减少摩擦的内涂层 | (Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas) |
BS EN 10302-2002 | 耐蠕变的镍和钴合金钢 | (Creep resisting steels, nickel and cobalt alloys) |
BS EN 10303-2001 | 在中等频率使用的薄磁性钢板和带材 | (Thin magnetic steel sheet and strip for use at medium frequencies) |
BS EN 10304-2001 | 继电器用磁性材料(钢铁) | (Magnetic materials (iron and steel) for use in relays) |
BS EN 10305-1-2002 | 精密仪器用钢管.交货技术条件.无缝冷拔钢管 | (Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes) |
BS EN 10305-2-2002 | 精密仪器用钢管.交货技术条件.焊接冷拔钢管 | (Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes) |
BS EN 10305-3-2002 | 精密仪器用钢管.交货技术条件.焊接冷精加工钢管 | (Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes) |
BS EN 10305-4-2003 | 精密仪器用钢管.技术交货条件.液压和气动系统用无缝冷拉管 | (Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems) |
BS EN 10305-5-2003 | 精密仪器用钢管.交货技术条件.焊接和冷精加工方形及矩形钢管 | (Steel tubes for precision applications - Technical delivery conditions - Welded and cold sized square and rectangular tubes) |
BS EN 10305-6-2005 | 精密仪器用钢管.交货技术条件.液压和气动动力系统用焊接冷拉管材 | |
BS EN 10306-2002 | 铁和钢.带平行法兰的 H 钢梁和IPE 钢梁的超声波测试 | (Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams) |
BS EN 10307-2002 | 无损检测.厚度大于或等于6mm的奥氏体铁素体不锈钢体钢扁平轧材的超声波检验测试法(反射法) | (Non-destructive testing - Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)) |
BS EN 10308-2002 | 无损检验.钢棒的超声检验 | (Non-destructive testing - Ultrasonic testing of steel bars) |
BS EN 10310-2004 | 岸上和海底管路用钢管和配件.聚酰胺粉末基内外涂层 | |
BS EN 10311-2005 | 水和其他含水液体传送用钢管和配件的连接用接头 | |
BS EN 10312-2003 | 包括引用水在内的水成液输送用焊接不锈钢管.交货技术条件 | (Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions) |
BS EN 10314-2002 | 高温下钢坚固强度最小值的运算方法 | (Method for the derivation of minimum values of proof strength of steel at elevated temperatures) |
BS EN 10319-1-2003 | 金属材料.拉伸应力松弛试验.试验机规程 | (Metallic materials - Tensile stress relaxation testing - Procedure for testing machines) |
BS EN 1032-2003 | 机械振动.为测定振动传导值对可移动机械的试验 | (Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value) |
BS EN 10326-2004 | 结构钢的持续热浸镀带材和薄板.交货技术条件 | |
BS EN 10327-2004 | 冷成形低碳钢持续热浸涂覆带材和片材.交货技术条件 | |
BS EN 10328-2005 | 铁和钢.表面加热后测定常规深度和硬度 | |
BS EN 1033-1996 | 手臂振动.测量手操纵机器把手平面的机械振动的试验室法.概述 | (Hand-arm vibration - Laboratory measurement of vibration at the grip surface of hand-guided machinery - General) |
BS EN 10330-2003 | 磁性材料.开路中磁性材料矫顽力的测量方法 | (Magnetic materials - Method of measurement of the coercivity of magnetic materials in an open circuit) |
BS EN 10331-2003 | 磁性材料.烧结的软磁性材料规范 | (Magnetic materials - Specification for sintered soft magnetic materials) |
BS EN 10332-2003 | 磁性材料.永磁(硬磁性)材料.磁性能的测量方法 | (Magnetic materials - Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties) |
BS EN 1034-1-2000 | 机械安全.纸制造和整饰机器设计和结构的安全要求.共同要求 | (Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Common requirements) |
BS EN 1034-3-2000 | 机械安全.造纸机械和精整机的设计和建造安全要求.络纱机、纵切机和绞合机 | (Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Winders and slitters, plying machines) |
BS EN 1035-1999 | 鞣皮机.移动平整机.安全要求 | (Tannery machines - Moving platen machinery - Safety requirements) |
BS EN 1036-1999 | 建筑物玻璃.由镀银浮法玻璃制成的室内用镜子 | (Glass in building - Mirrors from silver-coated float glass for internal use) |
BS EN 1037-1996 | 机器的安全性.避免意外起动 | (Safety of machinery - Prevention of unexpected start-up) |
BS EN 1038-1996 | 识别卡系统.适用于远程通信.用于电话卡的集成电路 | (Identification card systems - Telecommunications applications - Integrated circuit(s) card payphone) |
BS EN 1040-1997 | 化学消毒剂和防腐剂的基本杀毒作用.检验方法和要求(第1期) | (Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)) |
BS EN 1041-1998 | 厂商提供的医疗设备信息 | (Information supplied by the manufacturer with medical devices) |
BS EN 1043-1-1996 | 金属材料焊接的破坏试验.硬度试验.第1部分:电弧焊接的硬度试验 | (Destructive tests on welds in metallic materials - Hardness testing - Hardness test on arc welded joints) |
BS EN 1043-2-1997 | 金属材料焊接的破坏试验.第2部分:焊接连接件的显微硬度试验 | (Destructive tests on welds in metallic materials - Hardness testing - Micro hardness testing on welded joints) |
BS EN 1044-1999 | 铜焊.焊接填充金属 | (Brazing - Filler metals) |
BS EN 1045-1997 | 硬焊.硬焊用熔剂.分类和交货技术条件 | (Brazing - Fluxes for brazing - Classification and technical delivery conditions) |
BS EN 1047-1-1997 | 保险贮藏组合家具.耐火试验方法和分类.数据库 | (Secure storage units - Classification and methods of test for resistance to fire - Data cabinets) |
BS EN 1047-2-2000 | 安全存储装置.耐火试验方法和分类.数据空间和数据容器 | (Secure storage units - Classification and methods of test for resistance to fire - Data rooms and data containers) |
BS EN 1048-1999 | 热交换器.空气冷化液体冷却器.性能稳定性的试验方法 | (Heat exchangers - Air-cooled liquid coolers “dry coolers“ - Test methods for establishing the performance) |
BS EN 1049-2-1994 | 纺织品.织物.构造.分析方法.每单位长线数的测定 | (Textiles - Woven fabrics - Construction - Methods of analysis - Determination of number of threads per unit length) |
BS EN 1050-1997 | 机械安全.危害评估原理 | (Safety of machinery - Principles for risk assessment) |
BS EN 1051-1-2003 | 建筑物玻璃.玻璃砖和玻璃铺面.定义和说明 | (Glass in building - Glass blocks and glass pavers - Definitions and description) |
BS EN 1052-1-1999 | 砖石的试验方法.压缩强度的测定 | (Methods of test for masonry - Determination of compressive strength) |
BS EN 1052-2-1999 | 砖砌体的试验方法.挠曲强度的测定 | (Methods of test for masonry - Determination of flexural strength) |
BS EN 1052-3-2002 | 砖石工程的试验方法.起始剪切强度的测定 | (Methods of test for masonry - Determination of initial shear strength) |