编号 | 中文名称 | 英文名称 |
ANSI/ASTM D1525-2000
| 塑料维卡(Vicat)软化温度试验方法(08.01)
| Test Method for Vicat Softening Temperature of Plastics (08.01)
|
ANSI/ASTM D2319-1998
| 硬沥青软化点的试验方法(空气中立方块试验法)
| Test Method for Softening Point of Pitch (Cube-In-Air Method)
|
ANSI/ASTM D3104-1999
| 沥青软化点的试验方法(Mettler软化点法)
| Test Method for Softening Point of Pitches (Mettler Softening Point Method)
|
ANSI/ASTM D3461-1997
| 地沥青和硬沥青软化点测试方法(Mettler杯球法)
| Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-And-Ball Method)
|
ANSI/ASTM D61-1975
| 硬沥青软化点试验方法(水中方块法)
| Test Method for Softening Point of Pitches (Cube-In-Water Method)
|
ANSI/NSF 44-2004
| 民用阳离子交换水软化剂(i11)
| Residential cation exchange water softeners (i11)
|
ANSI/NSF 44?i10)-2002
| 住宅用阳离子交换水软化剂
| Residential Cation Exchange Water Softeners (i10)
|
ANSI/NSF 44�(i10)-2002
| 住宅用阳离子交换水软化器
| Residential Cation Exchange Water Softeners (i10)
|
ASTM C 1350M-1996
| 在软化点和退火范围(大约108Pa.s到大约1013Pa.s)之间玻璃黏滞度测定的标准试验方法
| Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa˙s to Approximately 10 13 Pa˙s) by Beam Bending (Metric)
|
ASTM C 336-1971
| 用纤维伸长法测定玻璃的软化点和应变点的试验方法
| Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
|
ASTM C 338-1993
| 玻璃的软化点的标准试验方法
| Standard Test Method for Softening Point of Glass
|
ASTM C 598-1993
| 用梁弯曲法测定玻璃的软化点和应变点的标准试验方法
| Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
|
ASTM C 965-1996
| 软化点以上的玻璃粘度的测定的标准实施规程
| Standard Practice for Measuring Viscosity of Glass Above the Softening Point
|
ASTM D 2319-1998
| 硬沥青软化点的标准试验方法(空气中立方块试验法)
| Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
|
ASTM D 3104-1999
| 硬沥青软化点的标准试验方法
| Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
|
ASTM D 3461-1997
| 硬沥青软化点的试验方法(米勒杯球法)
| Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
|
ASTM D 36-1995
| 沥青软化点标准试验方法(沥青软化点测定器)
| Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
|
ASTM D 3642-1998
| 某些碱溶性树脂软化点的试验方法
| Test Method for Softening Point of Certain Alkali-Soluble Resins
|
ASTM D 5070-1990
| 采用电位滴定法的织物软化剂中合成季胺盐的标准试验方法
| Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
|
ASTM D 5237-2005
| 织物软化剂评定的标准指南
| Standard Guide for Evaluating Fabric Softeners
|
ASTM D 5346-1993
| 测定油乳液和软化化合物用石油润滑油倾点的试验方法
| Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
|
ASTM D 6090-1999
| 软化点树脂标准试验方法(杯球法)
| Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
|
ASTM D 61-1975
| 硬沥青的软化点的试验方法(水中方块试验法)
| Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
|
ASTM D 6493-2005
| 用自动环球仪测定烃类树脂软化点的标准试验方法
| Standard Test Method for Softening Point of Hydrocarbon Resins by Automated Ring and Ball Apparatus
|
ASTM E 2347-2005
| 使用热机分析法测试压痕软化温度的标准试验方法
| Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
|
ASTM E 28-1999
| 用环球仪测定从松脂制品中取得的树脂的软化点的标准试验方法
| Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
|
BS 2HR 401-1973
| 冷加工和软化的无缝镍铬钛铝耐热合金管(镍基、Cr 19.5、Ti 2.2、Al 1.4)规范
| Specification for nickel-chromium-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
|
BS 6043-1.3-1983
| 制铝工业用炭素材料取样与试验方法.第1部分:电极硬柏油脂.第3节:软化点测定(环、球法)
| Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of softening point (ring and ball method)
|
BS 6782-6-1987
| 涂料用粘合剂.第6部分:软化点的测定方法
| Binders for paints - Method for determination of softening point (ring and ball method)
|
BS 7034-6-1989
| 玻璃粘度和测定粘度固定点.第6部分:软化点的测定方法
| Viscosity and viscometric fixed points of glass - Method for the determination of softening point
|
BS EN 1238-1999
| 粘合剂.热塑性粘合剂软化点的测定(环形和球形)
| Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
|
BS EN 1427-2000
| 石油及其制品的试验方法.沥青和沥青粘合剂.软化点的测定.环和球软点测定法
| Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of softening point - Ring and ball method
|
BS EN 2155-14-1993
| 飞机窗玻璃用透明材料的试验方法.1/10维卡特软化温度的测定
| Test methods for transparent materials for aircraft glazing - Determination of the 1/10 Vicat softening temperature
|
BS EN 727-1995
| 塑料管道和管道系统.热塑性塑料管和配件.维卡(vicat)软化温度的测定
| Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
|
BS EN ISO 306-2004
| 塑料.热塑性材料.维卡(VICAT)软化温度的测定
| Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
|
BS HR 209-1989
| 镍-铬-钴-钼-钛-铝耐热合金薄板材、带材和板材:软化的(镍基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)规范
| Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
|
BS HR 402-1973
| 冷加工和软化的无缝镍铬钴钛铝耐热合金管(镍基、Cr19.5、Co18.0、Ti2.5、Al1.5)规范
| Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
|
BS HR 403-1973
| 冷加工和软化的无缝镍铬钛耐热合金管(镍基、Cr19.5、Ti0.4)规范
| Specification for nickel-chromium-titanium heat-resisting alloy cold-worked and softened seamless tubes (nickel base, Cr 19.5, Ti 0.4)
|
BS HR 506-1989
| 镍-铬-钴-钛-铝耐热合金线材:软化的(镍基、Cr19.5、Co1.8、Ti2.5、Al1.5)规范
| Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5)
|
BS ISO 4625-1-2005
| 色漆和清漆用粘合剂.软化点的测定.环和球法
| Binders for paint and varnishes - Determination of softening point - Ring-and-ball method
|
BS ISO 4625-2-2005
| 色漆和清漆用粘合剂.软化点的测定.杯和球法
| Binders for paint and varnishes - Determination of softening point - Cup-and-ball method
|
DIN 1996-15-1975
| 筑路和相关用途沥青材料的检验.第15部分:根据威廉米法测定软化点
| Testing of Bituminous Materials for Road Building and Related Purposes; Determination of Softening Point in accordance with Wilhelmi
|
DIN 29640-1986
| 航空航天.丙烯酸酯塑料的软化处理.制造规程
| Aerospace; tempering of acrylic plastics; directives for manufacture
|
DIN 51920-1984
| 炭素材料试验.Mettler软化点的测定.粘接材料和浸渍材料
| Testing of carbon materials; determination of the Mettler softening point; binding and impregnating materials
|
DIN 52025-2004
| 含碳材料的检验.Kraeme-Sarnow软化点的测定
| Testing of carbonaceous materials - Determination of the Kraemer-Sarnow softening point
|
DIN 53180-1996
| 漆和类似涂料的粘结剂.树脂软化温度测定
| Binders for paints and varnishes - Determination of the softening temperature of resins
|
DIN EN 1238-1999
| 胶粘剂.热塑性粘接剂(环型和球型)软化点的测定
| Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball); German version EN 1238:1999
|
DIN EN 1427-1999
| 沥青和沥青粘合剂.软化点测定.圆环法和压球法
| Bitumen and bituminous binders - Determination of the softening point - Ring and ball method; German version EN 1427:1999
|
DIN EN 14743-2006
| 建筑物内水处理设备.软化剂.性能、安全和试验的要求
| Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing; German version EN 14743:2005
|
DIN EN 2155-14-1993
| 航空航天系列.飞行器上窗玻璃用透明材料的试验方法.第14部分:1/10维卡特软化温度的测定
| Aerospace series; test methods for transparent materials for aircraft glazing; part 14: determination of the 1/10 vicat softening temperature; German version EN 2155-14:1993
|
DIN EN 727-1995
| 塑料管道和管道输送系统.热塑塑料管和管件.维卡软化温度(VST)的测定; 德文版本 EN 727:1994
| Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST); German version EN 727:1994
|
DIN EN ISO 306-2004
| 塑料.热塑性材料.维卡特(VICAT)软化温度的测定(VST)
| Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004); German version EN ISO 306:2004
|
DIN EN ISO 4625-1-2006
| 色漆和清漆用粘合剂.软化点的测定.第1部分:环-球法
| Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2004); German version EN ISO 4625-1:2006
|
DIN EN ISO 4625-2-2006
| 色漆和清漆用粘合剂.软化点的测定.第2部分:环窝接合法
| Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004); German version EN ISO 4625-2:2006
|
DIN ISO 7884-6-1998
| 玻璃.粘度和粘度固定点.第6部分:软化点的测定
| Glass - Viscosity and viscometric fixed points - Part 6: Determination of softening point (ISO 7884-6:1987)
|
EN 1238-1999
| 胶粘剂 热塑性胶粘剂软化点的测定(环和球)
| Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball)
|
EN 1427-1999
| 沥青和沥青粘合剂 软化点的测定 圆环法和圆球法
| Bitumen and bituminous binders - Determination of the softening point - Ring and ball method
|
EN 727-1994
| 塑料管道和导管系统 热塑性管和配件 维卡(Vicat)软化温度(VST)的测定
| Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
|
EN ISO 306-1996
| 塑料 热塑性材料 维卡软化温度的测定
| Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:1994)
|
GB/T 11409.3-2003
| 橡胶防老剂、硫化促进剂软化点的测定
| Test method of softening point for rubber antiagers and vulcanizing accelerators
|
GB/T 12007.6-1989
| 环氧树脂软化点测定方法环球法
| Epoxide resins--Determination of softening point--Ring and ball method
|
GB/T 15332-1994
| 热熔胶粘剂软化点的测定环球法
| Determination of the softening point ofhot-melt adhesives--Ball and ring method
|
GB/T 1633-2000
| 热塑性塑料维卡软化温度(VST)的测定
| Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST)
|
GB/T 2294-1997
| 焦化固体类产品软化点测定方法
| Solid products of coal carbonization--Determination of softening point
|
GB/T 4507-1999
| 沥青软化点测定法(环球法)
| Standard test method for softening point of bitumen (Ring-and-ball apparatus)
|
GB/T 5989-1998
| 耐火制品荷重软化温度试验方法示差-升温法
| Refractory products--Determination of refractoriness-under-load--Differential-with rising temperature
|
GB/T 8802-2001
| 热塑性塑料管材、管件维卡软化温度的测定
| Thermoplastics pipes and fitting--Determination of vicat softening temperature
|
GB/T 9284-1988
| 色漆和清漆用漆基软化点的测定环球法
| Binders for paints and varnishes--Determination of softening point--Ring-and-ball method
|
ISO 17235-2002
| 皮革.物理和机械试验.软化度测定
| Leather - Physical and mechanical tests - Determination of softness
|
ISO 1893-2005
| 耐火制品.荷重软化温度(荷重耐溶性)的测定.升温示差法
| Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature
|
ISO 2507-1-1995
| 热塑性塑料管材和管件 维卡软化温度 第1部分:一般试验方法
| Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method
|
ISO 2507-2-1995
| 热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚
| Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
|
ISO 2507-3-1995
| 热塑性塑料管材和管件 维卡软化温度 第3部分:丙烯腈-丁二烯-苯乙烯共聚物和丙烯腈-丁二烯-丙烯酸酯共聚物管
| Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
|
ISO 306-2004
| 塑料.热塑性材料.维卡特(VICAT)软化温度的测定
| Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
|
ISO 4625-1-2004
| 色漆和清漆用粘合剂.软化点的测定.第1部分:环球法
| Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method
|
ISO 4625-2-2004
| 色漆和清漆用粘合剂.软化点的测定.第2部分:环窝接合法
| Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method
|
ISO 5940-1981
| 铝生产用碳素材料 电极用沥青 用环和球法测定软化点
| Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method
|
ISO 7884-6-1987
| 玻璃 粘度和粘度固定点 第6部分:软化点的测定
| Glass; Viscosity and viscometric fixed points; Part 6 : Determination of softening point
|
JB/T 4279.8-2008
| 漆包绕组线试验仪器设备检定方法 第8部分:软化击穿试验仪
| Verification procedure for test equipment of enamelled winding wire Part8:Cut-through tester |
JB/T 5636-1991
| 光学玻璃软化加热炉 能耗分等
| ()
|
JB/T 5705-1991
| 铝材软化退火电阻加热炉 能耗分等
| ()
|
JB/T 5706-1991
| 铜材软化退火电阻加热炉 能耗分等
| ()
|
JIS K5601-2-2-1999
| 涂料成份的试验方法.第2部分:溶剂溶解物质的成份分析.第21节:软化点(环和球法)
| Testing methods for paint components -- Part 2: Component analysis in solvent soluble matter -- Section 2: Softening point (Ring and ball method)
|
JIS K6863-1994
| 热溶粘接剂软化点的试验方法
| Testing methods for the softening point of hot melt adhesives
|
JIS K7196-1991
| 用热机械分析法测定热塑性塑料薄膜及薄板软化温度的测试方法
| Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis
|
JIS K7206-1999
| 塑料.热塑性材料.维卡软化温度的测定
| Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
|
JIS K7234-1986
| 环氧树脂软化点的测试方法
| Testing methods for softening point of epoxide resins
|
JIS R3103-1-2001
| 玻璃的粘度和测粘固定点.第1部分:软化点的测定
| Viscosity and viscometric fixed points of glass -- Part 1: Determination of softening point
|
JIS T3231-2005
| 硬化心切开术/静脉储存系统(带或不带过滤器)以及软化静脉储存袋
| Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
|
MT/T 44-1987(2005)
| 煤和岩石单向抗压强度及软化系数测定方法
| ()
|
NF B30-102-1968
| 玻璃.软化温度的测定.(LITTLETON点)
| (GLASS. DETERMINATION OF SOFTENING POINT. (LITTLETON POINT).)
|
NF G52-033-2003
| 皮革.物理和机械试验.软化度测定
| (Leather - Physical and mechanical tests - Determination of softness.)
|
NF L17-600-14-1993
| 航空航天系列.飞机窗用透明材料的试验方法.第14部分:1/10维卡软化温度的测定(EN 2155-14)
| (Aerospace series. Test methods for transparent materials for aircraft glazing. Part 14 : determination of the 1/10 vicat softening temperature.)
|
NF P98-623-1991
| 路面横标记.路面上使用的标记.聚乙烯树脂软化的分析
| (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF SLIGHTLY OR NON POLAR PLASTICIZERS OF POLYDIENIC RESINS.)
|
NF T20-167-1986
| 生产铝用碳质材料.电极用沥青.用环球法测定软化点
| (CARBONACEOUS MATERIALS FOR THE PRODUCTION OF ALUMINIUM. PITCH FOR ELECTRODES. DETERMINATION OF SOFTENING POINT BY THE RING-BALL METHOD.)
|
NF T51-021-1997
| 塑料.热塑塑料.维卡(VICAT)软化温度的测定
| (Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).)
|
NF T51-437-1985
| 塑料.固态酚树脂.软化点的测定.珠环法
| (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF SOFTENING POINT. “BALL AND RING“ METHOD.)
|
NF T54-024-1994
| 塑料管道系统.热塑塑料管和配件.维卡软化点的测定
| (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).)
|
NF T60-147-2003
| 石油产品.石蜡产品软化点的测定.环法和球法
| (Petroleum products - Determination of softening point of paraffin products - Ring and ball method.)
|
NF T66-008-2000
| 沥青和沥青粘合剂.软化点的测定.圆环法和压球法
| (Bitumen and bituminous binders - Determination of softening point - Ring and Ball method.)
|
QC/T 29089-1992(2005)
| 汽车软化仪表板表皮
| ()
|
SY/T 5644-1993(2006年确认)
| 石油沥青软化点试验器技术条件
| ()
|
YB/T 2203-1998(2005)
| 耐火浇注料荷重软化温度试验方法(非示差-升温法)
| ()
|
YB/T 370-1995(2005)
| 耐火制品荷重软化温度试验方法(非示差-升温法)
| ()
|
YB/T 4024-1991(2005)
| 耐火泥浆荷重软化温度试验方法 (升温法)
| ()
|
prEN 2120-1977
| 航空航天系列 软化和冷拉钢FE-PA12 棒材和线材0.25毫米D2.5毫米
| Aerospace series; steel FE-PA 12, softened and cold drawn; bars and wires 0,25 mm D 2,5 mm
|
prEN 2469-1998
| 航空航天系列 气体熔化钢FE-PA3901 (X1CrNi18-10) 软化的 钢丝 0,4 D 12,5 m
| Aerospace series - Steel FE-PA3901 (X1CrNi18-10) air melted - Softened - Wires - 0,4 D 12,5 mm - 450 MPa R<(Index)m> 650 MPa
|
prEN 3163-1999
| 航空航天系列 FE-PM3801 (X5CrNiCu17-4)空气熔炼软化钢 锻坯a 或 D≥300 mm
| Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) air melted, softened - Forging stock a or D ≥ 300 mm
|
prEN 3359-1998
| 航空航天系列 真空感应熔炼和消耗电极再熔炼固溶处理和沉淀处理软化的FE-PM1503 (X3CrNiMoAl13-8-2)钢 锻
| Aerospace series - Steel FE-PM1503 (X3CrNiMoAl 13-8-2) vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D 300 mm
|
prEN 3364-2000
| 航空航天系列 消耗电极再熔炼软化的FE-PM1802 (X5CrNiCu15-5)钢 锻坯a 或 D≤300 mm
| Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) consumable electrode remelted, softened - Forging stock a or D 300 mm
|
prEN 3365-1998
| 航空航天系列 空气熔炼软化的FE-PM3901 (X15CrNi17-3)钢 锻坯a 或 D≤ 300 mm
| Aerospace series - Steel FE-PM3901 (X15CrNi17-3) air melted - Softened - Forging stock - a or D 300 mm
|
prEN 3476-1998
| 航空航天系列 FE-PL1501 (30CrMo12)空气熔炼钢软化锻坏 a 或 D≤300 mm
| Aerospace series - Steel FE-PL1501 (30CrMo12) air melted - Softened - Forging stock - a or D 300 mm
|
prEN 3511-1999
| 航空航天系列 FE-PL1801 (100Cr6)真空感应熔炼和的消耗熔化电极再熔钢 软化的、机加工轴承制造用棒材a或
| Aerospace series - Steel FE-PL1801 (100Cr6); vacuum induction melted and consumable electrode remelted - Softened - Bar for the manufacture of machined bearings - a or D 130 mm
|
prEN 3516-1998
| 航空航天系列 FE-PL8201 (41NiCrMo2)空气熔炼 软化的钢 锻坯 a 或 D≤300 mm
| Aerospace series - Steel FE-PL8201 (41NiCrMo2) air melted - Softened - Forging stock - a or D 300 mm
|
prEN 3816-1997
| 航空航天系列 FE-PA3601 (X6CrNiTi18-10) 空气熔炼钢 、软化和冷轧 薄板和带 a≤3 mm、 Rm≥800 MPa
| Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) air melted, softened and cold rolled - Sheet and strip a 3 mm Rm≥ 800 MPa
|
prEN 3990-1997
| 航空航天系列 FE-PA2801 (X60NiMnCr13-5-3)软化的钢 机加工用棒 De≤150 mm、 650 MPa≤Rm 900 MPa
| Aerospace series - Steel FE-PA2801 (X60NiMnCr13-5-3) softened - Bar for machining D<(Index)e> 150 mm, 650 MPa R<(Index)
|
prEN 3992-1997
| 航空航天系列 FE-PA2801 (X60NiMnCr13-5-3)软化的钢 锻件 De≤150 mm、 620 MPa≤Rm≤900 MPa
| Aerospace series - Steel FE-PA2801 (X60NiMnCr13-5-3) softened - Forgings D<(Index)e> 150 mm, 620 MPa R<(Index)m> 900 MPa
|
prEN 4089-1997
| 航空航天系列 真空感应熔炼和真空电弧再熔、软化FE-PL5101 (13MoCrNiV4-4-3-1)钢 锻坯a 或 D≤150 mm
| Aerospace series - Steel FE-PL5101 (13MoCrNiV4-4-3-1) vacuum induction melted and vacuum arc remelted, softened - Forging stock a or D 150 mm
|
prEN 4346-2000
| 航空航天系列 FE-PM1505 (X1CrNiMoAlTi12-9-2) 真空感应熔炼和消耗电极再熔炼软化的钢 锻坯a 或D≤300
| Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock a or D 300 mm
|
prEN 4347-2000
| 航空航天系列 FE-PM1506 (X3CrNiMoAl13-8-2)真空感应熔炼和再消耗电极再熔炼软化的钢 锻坯a 或D≤300 mm
| Aerospace series - Steel FE-PM1506 (X3CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock a or D 300 mm
|
prEN ISO 306-2002
| 塑料 热塑性材料 维卡软化温度的测定
| Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO/DIS 306:2002)
|
编号 | 中文名称 | 英文名称 |