5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




法国电动机标准(NF motor standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  IEC |  JIS |  NF | 
编号中文名称英文名称
NF C47-732-2002 家用和类似用途的自动电控制设备.第2-2部分:电动机热保护器的特殊要求 (Automatic electrical controls for household and similar use - Part 2-2 : particular requirements for thermal motor protectors.)
NF C47-734-1993 家用和类似用途的自动电控制设备.第2部分:密封和半密封式电动压缩机热电动机保护装置的特殊要求 (Automatic electrical controls for househod and similar use. Part 2 : particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type.)
NF C47-734/A2-2003 家用和类似用途的自动电控制器.第2-4部分:密封和半密封电动压缩机组的电动机热保护器的特殊要求 (Automatic electrical controls for household and similar use - Part 2-4 : particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type.)
NF C47-740/A2-2003 家用和类似用途的自动电控制器.第2-10部分:电动机起动继电器的特殊要求 (Automatic electrical controls for household and similar use - Part 2-10 : particular requirements for motor starting relays.)
NF C51-120-1965 一般用低功率和中功率三相异步电动机.安装尺寸.联轴器.内部连接 (LOW AND MEDIUM OUTPUT THREE-PHASE ASYNCHRONOUS MOTORS FOR GENERAL USE. ANCHORING DIMENSIONS,CONNECTIONS,INTERNAL CONNECTIONS.)
NF C51-147-2001 带有标准尺寸和输出量的通用三相感应电动机.帧数为56至315、法兰数为65至740 (General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740.)
NF C51-150-1965 三相感应电动机.“全封闭”型.短路转子.E类 (Totally-enclosed three-phase induction motors with short-cicuited rotors. Class E.)
NF C51-155-1969 全封闭式线绕转子四极三相.感应电动机.E类 (Totally-enclosed wound-rotor four-pole three-phase. Induction motors. Class E.)
NF C51-160-1965 三相感应电动机.防护型.短路转子 (Protected three-phase induction motors with short-circuited rotors.)
NF C51-165-1965 三相感应电动机.防护型.绕组转子.E类 (Protected wound-rotor three-phase induction motors. Class E .)
NF C51-312-2003 旋转电机.第12部分:单速三相笼型感应电动机的起动性能 (Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors.)
NF C53-231-2002 半导体电力变换器.可调速电驱动装置.一般要求.第1部分:直流电动机的额定值规范 (Semiconductor power convectors - Adjustable speed electric drive systems - General requirements - Part 1 : rating specifications, particularly for D.C. motor drives.)
NF C54-150-1-2002 交流电动机的电容器.第1部分:总则.性能、试验和考核.安全要求.安装和操作指南 (AC motor capacitors - Part 1 : general - Performance, testing and rating - Safety requirements - Guide for installation and operation.)
NF C54-150-2-2003 交流电动机用电容器.第2部分:电动机起动电容器 (A.C. motor capacitors - Part 2 : motor start capacitors.)
NF C63-110-2001 低压开关设备和控制设备.第4-1部分:接触器和电动机起动器.机电接触器和电动机起动器 (Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.)
NF C63-110/A1-2003 低压开关设备和控制设备.第4-1部分:接触器和电动机起动器.机电式接触器和电动机起动器 (Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.)
NF C63-112-2000 低压开关设备和控制设备.第4-2部分:接触器和电动机起动器.交流半导体电动机控制器和起动器 (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - A.C. semiconductor motor controllers and starters.)
NF C63-112/A1-2002 低压开关设备和控制设备.第4-2部分:接触器和电动机启动器.交流电流半导体控制器和启动器 (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters.)
NF C63-113-2000 低压开关设备和控制设备.第4-3部分:接触器和电动机起动器.非电动机负载用交流半导体控制器和接触器 (Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.)
NF C63-146-1998 低压开关设备和控制设备.第5-1部分:控制线路装置和接转元件.电动机械控制线路装置 (Low-voltage switchgear and controlgear - Part 5-1 : control circuit devices and switching elements - Electromechanical control circuit devices.)
NF C63-650-1982 低压开关设备和控制设备.低压电动机起动器 (Low-voltage switchgear and controlgear. Low-voltage motor starters.)
NF C64-151-1985 交流高压开关设备和控制设备.高压电动机起动器.第1部分:直接交流起动器(全电压) (A.C. high-voltage switchgear and controlgear. High-voltage motor starters. Part 1 : direct-on-line (full voltage) A.C. starters.)
NF C64-170-2001 高压交流接触器和基于接触器的电动机起动器 (High-voltage alternating current contactors and contactor-based motor starters.)
NF C64-204-1993 电动机用高电压熔丝规范 (Specification for high-voltage fuse-links for motor circuit applications.)
NF E48-353-2002 液力传动.活塞泵和电动机的安装法兰盘和轴端用尺寸及识别码.第2部分:米制系列 (Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2 : metric series.)
NF E48-381-2002 液压传动.马达特性的测定.第1部分:在恒低速和恒压力下的测定 (Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure.)
NF E48-382-2002 液压传动.马达特性的测定.第2部分:起动性 (Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability.)
NF E48-387-1992 气压液力传动.气载噪声级测定试验规程.第2部分:电动机 (HYDRAULIC FLUID POWER. TEST CODE FOR DETERMINATION OF AIRBONE NOISE LEVELS. PART 2 : MOTORS.)
NF E48-393-2001 液力传动.系统和元件中产生的压力波动等级的测定.第3部分:电动机法 (Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3 : method for motors.)
NF F65-349-1-2000 电气牵引.铁路和道路车辆用旋转电机.第1部分:非电子交换回馈交变电流马达机 (Electrical traction - Rotating electrical machines for rail and road vehicules - Part 1 : machines other than electronic convertor-fed alternating current motors.)
NF F65-349-1/A1-2003 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子变流器供电的交流电动机之外的旋转电机 (Electric traction - Rotating electrical machines for rail and road vehicles - Part 1 : machines other than electronic convertor-fed alternating current motors.)
NF F65-377-1999 电力牵引.铁路车辆.反向供电交流电动机及其控制的联合检验 (Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control.)
NF F65-377-2-2003 铁路设施.机车车辆.联合试验.第2部分:斩波直流牵引电动机及其控制设备 (Railway applications - Rolling stock - Combined testing - Part 2 : chopper-fed direct current traction motors and their control.)
NF F65-377-3-2003 铁路设施.机车车辆.第3部分:间接变流器供电的交流电动机及其他控制系统的组合检验 (Railway applications - Rolling stock - Part 3 : combined testing of alternating current motors, fed by an indirect convertor, and their control system.)
NF J37-825-1-2002 充气船.第1部分:最大电动机功率为4.5KW的船 (Inflatable boats - Part 1 : boats with a maximum motor power rating of 4,5 kW.)
NF J37-825-2-2002 充气船.第2部分:最大电动机功率为4.5KW至15KW的船 (Inflatable boats - Part 2 : boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive.)
NF J37-825-3-2002 充气船.第3部分:最大电动机功率为15KW以上的船 (Inflatable boats - Part 3 : boats with a maximum power rating of 15 kW and greater.)
NF L45-201-1991 航空和航天.恒排量液压马达.总规范 (Aerospace. Constant displacement hydraulic motors. General specifications.)
NF L51-710-1966 飞行器用电动机.安装和驱动 (ELECTRIC MOTORS FOR AIRCRAFT. FIXING AND DRIVE.)
NF L70-010-1980 机载机械仪表和电动机械仪表.一般特性 (Aircraft. Mechanical and electromechanical indicators. General requirements.)
NF L70-520-1971 二相电动机 (TWO PHASE SERVOMOTORS.)
NF R11-415-1997 道路车辆.电动机起动器的电性能.试验方法和一般要求 (Road vehicles. Electrical performance of starter motors. Test methods and general requirements.)
NF S31-006-1-1992 声学.测量旋转式电动机械发出的天线噪音的试验规程.第1部分:在反射平面上自由场条件的鉴定方法 (ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF AIRBONE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY. PART 1 : ENGINEERING METHOD FOR FREE-FIELD CONDITIONS OVER A REFLECTING PLANE. (EUROPEAN STANDARD EN 21680-1).)
NF S31-006-2-1992 声学.测量旋转式电动机械发出的天线噪音的试验规程.第2部分:检验方法 (ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF AIRBONE NOISE EMITTED BY ROTATING ELECTRICAL MACHINERY. PART 2 : SURVEY METHOD. (EUROPEAN STANDARD EN 21680-2).)
NF S91-124-1999 牙钻手柄.牙科用低压电动机 (DENTAL HANDPIECES. DENTAL LOW-VOLTAGE ELECTRICAL MOTORS. (EUROPEAN STANDARD EN ISO 11498).)
NF X50-001-2-5-2002 发电站设备采购指南.第2-5部分:电气设备.马达 (Guide for procurement of power station equipment - Part 2-5 : electrical equipment - Motors.)
编号中文名称英文名称

返回