| 编号 | 中文名称 | 英文名称 |
|---|
| NF T54-918-1-1999 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.苯乙烯共聚物混合物(SAN+PVC).第1部分:管道,配件和系统规 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Part 1 : specifications for pipes, fittings and the system.) |
| NF J82-956-1996 | 内河航运船只.污水排放用连接件 | (Inland navigation vessels. Connections for the discharge of waste water.) |
| NF T54-062-1-1999 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统规范 | (Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
| NF P16-364-3-2003 | 地下非压力排水和污水管网更新用塑料管道系统.第3部分:紧配合管用衬层 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.) |
| NF T54-300-2-2003 | 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第2部分:管道 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-300-4-2003 | 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.) |
| NF P15-910-2001 | 在非收集污水区域与家用污水净化有关的服务活动.自身污水处理装置诊断及其维修合同化指南 | (Service activities relating to domestic sewerage purification in non-collective sewerage areas - Guidelines for a diagnosis of self-contained sewerage installations and for the contractualization of t) |
| NF P16-321-1/A3-1999 | 雨水和污水管道用陶土管、配件及管连接件.第1部分:要求 | (Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1 : requirements.) |
| NF T54-300-5-2003 | 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第5部分:系统的适用性 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF P16-321-3-1992 | 雨水管和污水管用陶土管、配件和管道连接件.第3部分:试验方法(EN 295-3) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 3 : test methods.) |
| NF P16-321-5-1994 | 排水及污水用陶土管道,配件和管接头.第5部分:多孔陶土管道和配件的要求(EN 295-5) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.) |
| NF T54-300-1-2003 | 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第1部分:总则 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.) |
| NF D18-211-2002 | 生活污水排放旋塞.镍铬电镀覆层的一般规范 | (Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr.) |
| NF P16-364-4-2003 | 地下非压力排水和污水网用塑料管道系统.第4部分:现场固化管用的管衬 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.) |
| NF P16-104-2001 | 外部建筑排水和污水系统翻新和修理用构件的一般要求 | (General requirements for components used for renovation and repair of drain and sewer systems outside buildings.) |
| NF T54-914-1-2000 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道,配件和系统规 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : requirements for pipes, fittings and th) |
| NF P16-150-6-1998 | 建筑物外部排水和污水系统.第6部分:泵设备 | (Drain and sewer systems outside buildings. Part 6 : pumping installations.) |
| NF T54-917-1-2000 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚乙烯(PE).第1部分:管道,配件和系统规范 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.) |
| NF U44-041-1985 | 肥料.污水处理副产物污泥.名称和技术条件 | (Fertilizers and soil conditioners. Sludge resulting from the treatment of sewage. Denominations and specifications.) |
| NF T54-037-1981 | 塑料.未增塑聚氯乙烯管道元件.生活污水无压排放设备用密封圈接头.使 用特性 | (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.) |
| NF P16-700-5-1999 | 废水处理设备.第5部分:污水池处理 | (Wastewater treatment plants - Part 5 : lagooning processes.) |
| NF P16-700-9-2002 | 污水处理厂.第9部分:气味控制和通风 | (Wastewater treatment plants - Part 9 : odour control and ventilation.) |
| NF T54-300-3-2003 | 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.) |
| NF X33-006-1998 | 水质.取样.第13部分:污水管和水处理厂淤泥的取样指南 | (WATER QUALITY. SAMPLING. PART 13 : GUIDANCE ON SAMPLING OF SLUDGES FROM SEWAGE AND WATER TREATMENT WORKS. (EUROPEAN STANDARD EN ISO 5667-13).) |
| NF P41-102-1942 | 配水.术语.污水排放 | (WATER SUPPLY. TERMINOLOGY. SEWAGE DISPOSAL.) |
| NF U44-108-1982 | 城市污水处理后的污泥.泥浆.用于批量平均含量的取样 | (FLUID SLUDGE FROM TREATMENT OF URBAN SEWAGE. SAMPLING FOR ESTIMATING THE AVERAGE CONTENT OF A BATCH.) |
| NF T57-214-1-1998 | 地下排水系统和压力下污水排放的塑料管道系统.基于不饱和聚酯 树脂(UP)的玻璃增强热固塑料.第1部分:一般性( | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.) |
| NF X43-103-1996 | 空气质量.气味测量.污水气味测量.超阀限方法 | (AIR QUALITY. OLFACTOMETRIC MEASUREMENTS. MEASUREMENT OF THE ODOUR OF A GAZEOUS EFFLUENT. SUPRA-THRESHOLD METHODS.) |
| NF P16-364-1-2003 | 地下非压力排水和污水管网更新用塑料管道系统.第1部分:总则 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general.) |
| NF P16-700-3-2001 | 污水处理厂.第3部分:预处理 | (Wastewater treatment plants - Part 3 : preliminary treatment.) |
| NF A48-820-1994 | 污水排放用球墨铸铁管、配件、附件及其接头.要求和试验方法 | (Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.) |
| NF P16-700-10-2001 | 污水处理厂.第10部分:安全原则 | (Wastewater treatment plants - Part 10 : safety principles.) |
| NF P16-321-7-1996 | 排水及污水用陶土管道.配件和管接头.第7部分:陶土管道和管道插孔用连接件的要求 | (Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.) |
| NF P16-100-1997 | 自流系统泄放、排水和污水管部件的一般要求 | (General requirements for components used in discharge pipes, drains and sewers for gravity systems.) |
| NF P16-321-4-1995 | 排水管和污水管用的陶土管和配件及管接头.第4部分:专用配件、转换接头和可互换附件的要求(EN 295-4) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 4 : requirements for special fittings, adaptors and compatible accessories.) |
| NF T54-919-1-1999 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:管道,配件和系统规范 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : specifications for pipes, fittings and the system.) |
| NF P16-321-6-1996 | 排水及污水用陶土管道.配件和管接头.第6部分:陶土管道的出入水孔的要求 | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.) |
| NF P16-150-7-1998 | 建筑物外管道和污水系统.第6部分:维修和操作(欧洲标准EN 752-7) | (DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 7 : MAINTENANCE AND OPERATIONS. (EUROPEAN STANDARD EN 752-7).) |
| NF T90-341-1995 | 水质.通过化学药品和污水对活性污泥中微生物硝酸化抑制作用的鉴定方法(EN ISO 9509) | (Water quality. Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water.) |
| NF H96-112-2-1999 | 垃圾收集用提升设备.第2部分:容量500-1300升的移动废料容器用转轴式提升设备的技术规范和安全要求 | (Lifting devices for refuse collection. Part 2 : technical specifications and safety requirements concerning trunnion lifting devices used for mobile waste containers with capacities from 500 l to 1 300 l.) |
| NF P81-201-1993 | 垃圾收集用提升设备.第3部分:容量80-1300升的移动废料容器用冠形和转轴式提升设备的技术规范和安全要求 | (Lifting devices for refuse collection. Part 3 : technical specifications and safety requirements concerning comb and trunnion lifting devices used for mobile waste containers with capacities from 80 l to 1 300 l.) |
| NF R17-112-1-1998 | 垃圾收集车及其相关提升装置.一般要求和安全要求.第1部分:尾部负载的垃圾收集车 | (Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 1 : rear-end loaded refuse collection vehicles.) |
| NF H96-112-4-1999 | 垃圾收集用提升设备.第4部分:检验提升设备的要求和试验方法 | (LIFTING DEVICES FOR REFUSE COLLECTION. PART 4 : REQUIREMENTS FOR CHECKING THE LIFTING DEVICE AND TEST METHODS.) |
| NF R10-302-1991 | 道路车辆.垃圾收集车发出的空中噪声测量 | (ROAD VEHICLES. MEASUREMENT OF AIR BORNE NOISE EMITTED BY REFUSE COLLECTION VEHICLES.) |
| NF H96-110-4-1997 | 垃圾运送箱.第4部分:有宽耳轴或圆锥形和/或梳齿提升设备用容积从750L到1700L的四轮运送箱.尺寸和设计(欧洲 | (MOBILE WASTE CONTAINERS. PART 4 : CONTAINERS WITH 4 WHEELS WITH A CAPACITY FROM 750 L TO 1700 L WITH FLAT LID(S), FOR WIDE TRUNNION OR BG-AND/OR WIDE COMB LIFTING DEVICE. DIMENSIONS AND DESIGN. (EUROPEAN STANDARD EN 840-4).) |
| NF H96-110-6-1997 | 垃圾运送箱.第6部分:安全和健康要求(欧洲标准EN 840-6) | (MOBILE WASTE CONTAINERS. PART 6 : SAFETY AND HEALTH REQUIREMENTS. (EUROPEAN STANDARD EN 840-6).) |
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com