编号 |
中文名称 |
英文名称 |
JIS B0101-1994
|
螺纹和紧固件.词汇
|
Screw threads and fasteners -- Vocabulary
|
JIS B0143-1985
|
螺纹紧固件用尺寸符号和标识
|
Symbols and designations of dimensions for threaded fasteners
|
JIS B1003-2003
|
紧固件.ISO 公制外螺纹零件端头
|
Fasteners -- Ends of parts with external ISO metric thread
|
JIS B1006-1985
|
外螺纹紧固件用退刀螺纹和螺纹根切
|
Thread run-outs and thread undercuts for external threaded fasteners
|
JIS B1010-2003
|
紧固件的标识系统
|
Designation system for fasteners
|
JIS B1021-2003
|
紧固件公差.第1部分:螺栓、螺钉、螺柱和螺母.产品分级 A、B 和 C
|
Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
|
JIS B1022-1999
|
紧固件公差.第3部分:螺栓,螺钉和螺母用垫圈.A级和C级产品
|
Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C
|
JIS B1041-1993
|
紧固件.表面缺陷.第1部分:普通要求用螺栓、螺钉和螺柱
|
Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements
|
JIS B1042-1998
|
紧固件.表面不连续性.第2部分:螺母
|
Fasteners -- Surface discontinuities -- Part 2: Nuts
|
JIS B1043-1993
|
紧固件.表面缺陷.第3部分:特殊要求用螺栓、螺钉和螺柱
|
Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements
|
JIS B1044-2001
|
紧固件.电镀层
|
Fasteners -- Electroplated coatings
|
JIS B1045-2001
|
紧固件.测定氢脆的预加载试验.平行承载表面法
|
Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method
|
JIS B1046-2005
|
紧固件.非电解锌粉覆盖层
|
Fasteners -- Non-electrolytically applied zinc flake coatings
|
JIS B1047-2006
|
耐腐蚀不锈钢紧固件的钝化处理
|
Passivation of corrosion-resistant stainless-steel fasteners
|
JIS B1051 ERRATUM 1-2001
|
碳素钢和合金钢紧固件的机械特性.第1部分:螺栓、螺钉和螺柱(勘误1)
|
(Erratum 1)
|
JIS B1051-2000
|
碳素钢和合金钢紧固件的机械特性.第1部分:螺栓、螺钉和螺柱
|
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs
|
JIS B1053-1999
|
用碳钢和合金钢制成的紧固件的机械特性.第5部分:不低于拉伸强度的紧固螺钉和类似螺纹紧固件
|
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses
|
JIS B1054-1-2001
|
耐腐蚀不锈钢紧固件的机械性能.第1部分:螺栓、螺钉和螺柱
|
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 1: Bolts, screws and studs
|
JIS B1054-2-2001
|
耐腐蚀不锈钢紧固件的机械特性.第2部分:螺母
|
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 2: Nuts
|
JIS B1054-3-2001
|
耐腐蚀不锈钢紧固件的机械特性.第3部分:无拉伸应力的定位螺钉和类似紧固件
|
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
|
JIS B1054-4-2006
|
耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉
|
Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 4: Tapping screws
|
JIS B1057-2001
|
有色金属紧固件的机械性能
|
Mechanical properties of non-ferrous metal fasteners
|
JIS B1058-1995
|
紧固件的机械特性.第7部分:扭力试验和标称直径为1mm-10mm的螺栓和螺钉的最小扭矩
|
Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
|
JIS B1071-1985
|
紧固件尺寸和几何形状的验证方法
|
Method of verification for size and geometry of threaded fasteners
|
JIS B1081 ERRATUM 1-2000
|
螺纹紧固件.轴向负荷疲劳试验.试验方法和结果评定(勘误1)
|
Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results (Erratum 1)
|
JIS B1081-1997
|
螺纹紧固件.轴向载荷疲劳试验.试验方法和结果评价
|
Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results
|
JIS B1082-1987
|
紧固件的应力区和承载区
|
Stress area and bearing area for threaded fasteners
|
JIS B1083-1990
|
螺纹紧固件的紧固总则
|
General rules for tightening of threaded fasteners
|
JIS B1091-2003
|
紧固件.验收检验
|
Fasteners -- Acceptance inspection
|
JIS B1092-2006
|
紧固件.质量保证体系
|
Fasteners -- Quality assurance system
|
JIS B1099-2005
|
紧固件.螺栓、螺钉、螺柱和螺母的一般要求
|
Fasteners -- General requirements for bolts, screws, studs and nuts
|
JIS E1107-1998
|
鱼尾板用钢螺栓及螺母和紧固件
|
Steel bolts and nuts for fish-plates and fastenings
|
JIS E1118-1997
|
预应力混凝土轨枕.铁轨紧固件
|
Prestressed concrete sleepers -- Rail fastenings
|
JIS L3416-2000
|
一触即合紧固件
|
Touch and close fastener
|
编号 |
中文名称 |
英文名称 |