| 编号 | 中文名称 | 英文名称 |
|---|
| JIS B4130-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶体氮化硼的粒度
| Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride
|
| JIS B4131-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶体氮化硼砂轮
| Diamond/CBN products -- Diamond or CBN grinding wheels
|
| JIS B4138-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶体氮化硼分割锯
| Diamond/CBN products -- Diamond or CBN segmented saws
|
| JIS B4141-1998
| 金刚石/立方晶体氮化硼产品.金刚石或立方晶粒氮化硼砂轮和锯.形状的尺寸特性和代码
| Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms
|
| JIS B6915-1999
| 钢铁的渗氮和碳氮共渗工艺
| Process of nitriding and nitrocarburizing of iron and steel
|
| JIS B7953-2004
| 大气中氮氧化合物的连续分析仪
| Continuous analyzers for oxides of nitrogen in ambient air
|
| JIS B7982-2002
| 烟道废气中氧化氮的自动测量系统和分析仪
| Automated measuring systems and analyzers for nitrogen oxides in flue gas
|
| JIS B7988-2007
| 废气中氧化亚氮用连续分析器
| Continuous analyzers for dinitrogen monoxide in flue gas
|
| JIS B7992-2002
| 用非萃取法测定烟道废气中氮的氧化物的自动测量系统
| Automated measuring systems for oxides of nitrogen in flue gas using non-extractive methods
|
| JIS C6492-1998
| 印制电路基板材料.限定可燃性(垂直燃烧试验)的双马来酰亚胺/三氮杂苯改良环氧衍生物机织玻璃纤维包铜层压片
| Base materials for printed circuits -- Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test)
|
| JIS C6524-1995
| 多层印制线路板用半固化片.BISMALEIMIDE/三氮杂苯/环氧树脂浸渍玻璃布
| Prepreg for multilayer printed wiring boards -- Bismaleimide/Triazine/Epoxide resin-impregnated glass cloth
|
| JIS D1030-1998
| 汽车.排气中一氧化碳、二氧化碳、总烃类和氧化氮含量测量的分析程序
| Automobiles -- Analytical procedure for measurement of carbon monoxide, carbon dioxide, total hydrocarbons and oxides of nitrogen in exhaust gas
|
| JIS G0562-1993
| 钢和铁渗氮层深度的测量方法
| Method of measuring nitrided case depth for iron and steel
|
| JIS G0563-1993
| 渗氮钢和铁的表面硬度的测量方法
| Method of measuring surface hardness for nitrided iron and steel
|
| JIS G1228 AMD 1-2006
| 钢铁.氮含量的测定方法(修改件1)
| Iron and steel -- Methods for determination of nitrogen content (Amendment 1)
|
| JIS G1228-1997
| 钢铁中氮含量的测定方法
| Iron and steel -- Methods for determination of nitrogen content
|
| JIS G7502-2000
| 锻造氮化钢
| Wrought nitriding steels
|
| JIS H1612-1993
| 钛和钛合金中氮的测定方法
| Methods for determination of nitrogen in titanium and titanium alloys
|
| JIS H1653-1991
| 锆及锆合金中氮的测定方法
| Methods for determination of nitrogen in zirconium and zirconium alloys
|
| JIS H1685-2000
| 钽中氮的测定方法
| Method for determination of nitrogen in tantalum
|
| JIS H8690-1993
| 干式处理氮化钛镀层
| Titanium nitride coatings by dry processing
|
| JIS K0104-2000
| 废气中氧化氮含量的测定方法
| Methods for determination of nitrogen oxides in flue gas
|
| JIS K0400-44-40-2000
| 水质.基尔达氮的测定.用硒矿化后的检测方法
| Water quality -- Determination of Kjeldahl nitrogen -- Method after mineralization with selenium
|
| JIS K0400-45-10-2000
| 水质.氮的测定.用戴氏合金还原后的催化消化
| Water quality -- Determination of nitrogen -- Catalytic digestion after reduction with Devarda's alloy
|
| JIS K1107-2005
| 氮气
| Nitrogen
|
| JIS K2609-1998
| 原油和石油产品.氮含量的测定
| Crude petroleum and petroleum products -- Determination of nitrogen content
|
| JIS K6217-2-2001
| 橡胶工业用碳黑.基本特性.第2部分:特定表面面积的测定.氮吸收法.单点法
| Carbon black for rubber industry -- Fundamental characteristics -- Part 2: Determination of specific surface area -- Nitrogen adsorption methods -- Single-point procedures
|
| JIS K7245-2000
| 塑料.环氧化胺硬化剂.伯胺、仲胺和叔胺族氮含量的测定
| Plastics -- Amine epoxide hardeners -- Determination of primary, secondary and tertiary amine group nitrogen content
|
| JIS K8776-1994
| 2-羟基-1-(2'羟基-4'-磺基-1'-萘偶氮)-3-萘酸
| 2-Hydroxy-1-(2-hydroxy-4-sulfo-1-naphthylazo)-3-naphthoic acid
|
| JIS K8826 AMD 1-2006
| 氮化物分析用氢氧化钠（修改件1）
| Sodium hydroxide for nitrogen compounds analysis (Amendment 1)
|
| JIS K8826-2004
| 氮化物分析用氢氧化钠
| Sodium hydroxide for nitrogen compounds analysis
|
| JIS K9501-1995
| 叠氮化钠
| Sodium azide
|
| JIS K9524-1994
| 偶氮砷 III
| Arsenazo III
|
| JIS L0855-2005
| 耐氧化氮染色牢度试验方法
| Test methods for colour fastness to nitrogen oxides
|
| JIS P4505-1999
| 重氮感光纸
| Diazo Sensitized Papers
|
| JIS R1603-2007
| 精细陶瓷用氮化硅细粉末的化学分析方法
| Methods for chemical analysis of fine silicon nitride powders for fine ceramics
|
| JIS R1640-2002
| 氮化硅的定量相位分析方法
| Methods for the quantitative phase analysis of silicon nitride
|
| JIS R1669-2006
| 精细陶瓷.滚动轴承球的氮化硅材料的基本特征和分类
| Fine ceramics -- Fundamental characteristics and classification of silicon nitride materials for rolling bearing balls
|
| JIS R1675-2007
| 精细陶瓷用精细氮化铝粉的化学分析方法
| Methods for chemical analysis of fine aluminium nitride powders for fine ceramics
|
| JIS R1701-1-2004
| 精细陶瓷(高级陶瓷、高级工业陶瓷).光催化材料的空气净化性能试验方法.第1部分:氧化氮的清除
| Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials -- Part 1: Removal of nitric oxide
|
| JIS S3032-1994
| 开放式强制通风燃油空间取暖炉用氧化氮排放率的测量方法
| Measurement method of NOx emission rate for open type forced ventilating oil burning space heaters
|
| JIS T7403-2-2005
| 外科植入物用不锈钢基合金.第2部分:锻制的高氮不锈钢
| Stainless steel based alloys for surgical implant applications -- Part 2: Wrought high nitrogen stainless steel
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com