编号 | 中文名称 | 英文名称 |
---|---|---|
JIS A8321-2001 | 土方机械.降低液压挖土机和反铲装载机声震的控制装置.要求和试验 土工機械 ― 油圧ショベル又はバックホウローダのブーム降下制御装置 ― 性能基準及び試験方法 | Earth-moving machinery -- Hydraulic excavator and backhoe loader boom-lowering control device -- Requirements and tests |
JIS A8340-4-2004 | 土方机械.安全.第4部分:液压挖土机的要求 土工機械-安全-第4部:油圧ショベルの要求事項 | Earth-moving machinery -- Safety -- Part 4: Requirements for hydraulic excavators |
JIS A8403-1-1996 | 运土机械.液压挖掘机.第1部分:术语和商业要求 土工機械 ― 油圧ショベル ― 第1部:用語及び仕様項目 | Earth-moving machinery -- Hydraulic excavators -- Part 1: Terminology and commercial specifications |
JIS A8403-2-1998 | 运土机械.液压挖掘机.第2部分:规范活页的标准格式 土工機械 ― 油圧ショベル ― 第2部:仕様書様式 | Earth-moving machinery -- Hydraulic excavators -- Part 2: Standard form of specification sheets |
JIS A8403-3-1998 | 运土机械.液压挖掘机.第3部分:测试方法 土工機械 ― 油圧ショベル ― 第3部:性能試験方法 | Earth-moving machinery -- Hydraulic excavators -- Part 3: Testing methods |
JIS A8403-4-1998 | 运土机械.液压挖掘机.第4部分:铲斗的额定容积 土工機械 ― 油圧ショベル ― 第4部:バケットの定格容量 | Earth-moving machinery -- Hydraulic excavators -- Part 4: Bucket volumetric ratings |
JIS A8403-5-1998 | 运土机械.液压挖掘机.第5部分:机械过加载的测量方法 土工機械 ― 油圧ショベル ― 第5部:掘削力測定方法 | Earth-moving machinery -- Hydraulic excavators -- Part 5: Method of measuring tool forces |
JIS A8922-2001 | 土方机械.液压挖土机.操作人员安全保护装置的实验室试验和性能要求 土工機械 ― 油圧ショベル ― 運転員保護ガードの試験及び性能要求事項 | Earth-moving machinery -- Hydraulic excavators -- Laboratory tests and performance requirements for operator protective guards |
JIS B0142-1994 | 液压和气动技术的术语汇编 油圧及び空気圧用語 | Glossary of terms for oil hydraulics and pneumatics |
JIS B2291-1994 | 21 MPA液压用平焊管法兰 | 21 MPa slip-on welding pipe flanges for hydraulic use |
JIS B2292-1-2005 | 液压传动.容积式泵和发动机的安装盘与轴端的尺寸和识别代码.第1部分:用米制单位表示的英寸系列 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units |
JIS B2292-2-2005 | 液压传动.容积式泵和发动机的安装盘与轴端的尺寸和识别代码.第2部分:米制系列 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series |
JIS B2351-5-2000 | 液力和一般用途金属管接头.第5部分.螺纹液压动力接头的试验方法 | Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections |
JIS B2409-2002 | 液压流体动力.密封装置.油压往复设备的密封件性能评定的标准试验方法 | Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
JIS B6403-1994 | 液压机.准确度的测试 | Hydraulic presses -- Testing of the accuracy |
JIS B8038-1998 | 往复式液压气缸用活塞环 | Piston rings for reciprocating hydraulic cylinders |
JIS B8301 ERRATUM 1-2001 | 旋转动力泵.液压性能验收试验.1级和2级(勘误1) | Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2 (Erratum 1) |
JIS B8301-2000 | 旋转动力泵.液压性能验收试验.1级和2级 | Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2 |
JIS B8306-2002 | 离心油泵.用油作为测试液体的液压性能验收试验 | Centrifugal type oil pumps -- Hydraulic performance acceptance tests by oil as testing liquid |
JIS B8311-2002 | 往复式泵.液压性能验收试验 | Reciprocating pumps -- Hydraulic performance acceptance tests |
JIS B8312-2002 | 齿轮泵和螺旋泵.液压性能验收试验 | Gear pumps and screw pumps -- Hydraulic performance acceptance tests |
JIS B8348-2002 | 液压流体动力.泵和电动机.试验方法 | Hydraulic fluid power -- Pumps and motors -- Test methods |
JIS B8349-2-2004 | 液压传动.系统和组件中产生的压力波动级别的测定.第2部分:泵的简化法 | Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 2: Simplified method for pumps |
JIS B8350-1-2003 | 液压流体动力.气载噪声级测定的试验规程.第1部分:泵 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps |
JIS B8350-2-2003 | 液压流体动力.气载噪声级测定的试验规程.第2部分:马达 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors |
JIS B8350-3-2003 | 液压流体动力.气载噪声级测定的试验规程.第3部分:泵.采用平行六面体麦克风排列法 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array |
JIS B8351-1999 | 液压叶片泵 | Vane pumps for hydraulic use |
JIS B8352-1999 | 液压齿轮泵 | Gear pumps for hydraulic use |
JIS B8355-1997 | 液压流体动力.装配型四通电磁操纵阀 | Hydraulic fluid power -- Subplate type solenoid operated four-port valves |
JIS B8356-1-2000 | 液压动力.过滤器.过滤器性能的评价.第1部分:过滤器元件.功能特性的检验程序 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 1: Filter elements -- Procedure for verifying performance characteristics |
JIS B8356-2-2000 | 液压动力.过滤器.过滤器性能的评价.第2部分:过滤器元件.制造完整性的检定和首次起泡点的测定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 2: Filter elements -- Verification of fabrication integrity and determination of the first bubble point |
JIS B8356-3-2000 | 液压动力.过滤器.过滤器性能的评价.第3部分:过滤器元件.耐破坏/耐爆裂性检定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 3: Filter elements -- Verification of collapse/burst resistance |
JIS B8356-4-2000 | 液压动力.过滤器.过滤器性能的评价.第4部分:过滤器元件.材料与液体相容性的检定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 4: Filter elements -- Verification of material compatibility with fluid |
JIS B8356-5-2000 | 液压动力.过滤器.过滤器性能的评价.第5部分:过滤器元件.端向负荷试验方法 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 5: Filter elements -- Method for end load test |
JIS B8356-6-2000 | 液压动力.过滤器.过滤器性能的评价.第6部分:过滤器元件.流动疲劳特性的检定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 6: Filter elements -- Verification of flow fatigue characteristics |
JIS B8356-7-2000 | 液压动力.过滤器.过滤器性能的评价.第7部分:过滤器.压降与流动特性关系的评价 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 7: Filters -- Evaluation of pressure drop versus flow characteristics |
JIS B8356-8-2002 | 液压流体动力过滤器.评定过滤元件过滤性能的多通路试验方法 | Hydraulic fluid power filters -- Multi-pass method for evaluating filtration performance of a filter element |
JIS B8356-9-2000 | 液压动力.过滤器.过滤器性能的评价.第9部分:过滤器.对要求的说明 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 9: Filters -- Statement of requirements |
JIS B8357-2000 | 液压动力.带压力补偿的流量控制阀.安装面 | Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces |
JIS B8358-2004 | 液压传动.气囊式蓄能器.试验方法 | Hydraulic fluid power -- Bladder type accumulators -- Test methods |
JIS B8360-2000 | 液压用钢丝增强的橡胶软管组件 | Wire reinforced rubber hose assemblies for hydraulic use |
JIS B8361-2000 | 液压流体动力.与系统有关的一般规则 | Hydraulic fluid power -- General rules relating to systems |
JIS B8362-2000 | 液压用织物增强的热塑性塑料软管组件 | Textile reinforced thermoplastic hose assemblies for hydraulic use |
JIS B8363-2000 | 液压软管组件的端部配件及接头 | End fittings and adapters for hydraulic hose assemblies |
JIS B8364-2000 | 液压用织物增强的橡胶软管组件 | Textile reinforced rubber hose assemblies for hydraulic use |
JIS B8366-1-2000 | 流体动力系统和元件.液压缸.元件和识别代码.第1部分:缸径和活塞杆直径.米制系列 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters -- Metric series |
JIS B8366-2-2000 | 流体动力系统和元件.液压缸.元件和识别码.第2部分:标称压力 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 2: Nominal pressures |
JIS B8366-3-2000 | 流体动力系统和元件.液压缸.元件和识别码.第3部分:活塞冲程的基本系列 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 3: Basic series of piston strokes |
JIS B8366-4-2000 | 流体动力系统和元件.液压缸.元件和识别码.第4部分:活塞杆螺纹尺寸和类型 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 4: Piston rod thread dimension and types |
JIS B8366-5-2000 | 流体动力系统和元件.液压缸.元件和识别码.第5部分:识别码 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 5: Identification code |
JIS B8366-6-2001 | 流体动力系统及元件.液压缸.元件和识别代码.第6部分:液压流体动力.单杆液压缸、16MPa和25MPa圆形缸盖、焊接 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 6: Hydraulic fluid power -- Single rod cylinders, 16 MPa and 25 MPa round cover, welded or threaded flange type mounting dimensions -- Tolerances |
JIS B8366-7-2001 | 液压气动系统及元件.液压缸.元件和识别代码.第7部分:液压流体动力.单杆液压缸、16MPa方形缸盖、系杆固定型 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 7: Hydraulic fluid power -- Single rod cylinders, 16 MPa square cover, tie rod tightened type mounting dimensions -- Port dimensions |
JIS B8367-1-2002 | 液压气缸的安装尺寸.第1部分:单杆.16 MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径25 mm 至 500 mm) | Mounting dimensions for hydraulic cylinders -- Part 1: Single rod -- 16 MPa series, round cover type with welded or threaded flange (Bores from 25 mm to 500 mm) |
JIS B8367-2-2002 | 液压气缸的安装尺寸.第2部分:单杆.16 MPa系列、方盖、系杆密封型液压气缸(气缸内径25 mm 至 200 mm) | Mounting dimensions for hydraulic cylinders -- Part 2: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 25 mm to 200 mm) |
JIS B8367-3-2002 | 液压气缸的安装尺寸.第3部分:单杆.16 MPa系列、方盖、系杆密封型液压气缸(气缸内径250 mm 至 500 mm) | Mounting dimensions for hydraulic cylinders -- Part 3: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 250 mm to 500 mm) |
JIS B8367-4-2002 | 液压气缸的安装尺寸.第4部分:单杆.25 MPa系列、焊接或螺纹法兰的圆盖型液压气缸(气缸内径50 mm 至 500 mm) | Mounting dimensions for hydraulic cylinders -- Part 4: Single rod -- 25 MPa series, round cover types with welded or threaded flange (Bores from 50 mm to 500 mm) |
JIS B8367-5-2002 | 液压气缸的安装尺寸.第5部分:单杆.10 MPa系列、方盖、系杆密封型液压气缸(汽缸内径40 mm 至 200 mm) | Mounting dimensions for hydraulic cylinders -- Part 5: Single rod -- 10 MPa series, square cover and tie rod tightend type (Bores from 40 mm to 200 mm) |
JIS B8367-6-2002 | 液压气缸的安装尺寸.第6部分:单杆.10 MPa系列、空间窄小型液压气缸(汽缸内径32 mm 至 100 mm) | Mounting dimensions for hydraulic cylinders -- Part 6: Single rod -- 10 MPa series space saving type (Bores from 32 mm to 100 mm) |
JIS B8368-1-2002 | 气压缸的安装尺寸.第1部分:单杆.带固定安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 2 | Mounting dimensions for pneumatic cylinders -- Part 1: Single rod -- 1 MPa series, square cover and tie rod tightend type with fixed mounting devices (Bores from 32 mm to 250 mm) |
JIS B8368-2-2002 | 气压缸的安装尺寸.第2部分:单杆.带可分离安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 | Mounting dimensions for pneumatic cylinders -- Part 2: Single rod -- 1 MPa series, square cover and tie rod tightend type with detachable mounting devices (Bores from 32 mm to 320 mm) |
JIS B8368-3-2002 | 气压缸的安装尺寸.第3部分:单杆.带固定和可分离安装装置型的1 MPa系列、小缸径液压气缸( 汽缸内径8 mm 至 2 | Mounting dimensions for pneumatic cylinders -- Part 3: Single rod -- 1 MPa series, small bore with fixed and detachable mounting device type (Bores from 8 mm to 25 mm) |
JIS B8368-4-2002 | 气压缸的安装尺寸.第4部分:单杆.1 MPa系列、节省空间型液压气缸(汽缸内径20 mm 至 100 mm) | Mounting dimensions for pneumatic cylinders -- Part 4: Single rod -- 1 MPa series, space saving cylinders (Bores from 20 mm to 100 mm) |
JIS B8372-1-2003 | 液压流体动力.压缩空气压力调节器和过滤调节器.第1部分:厂商资料和产品生产要求应包含的主要特性 | Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements |
JIS B8375-1-2000 | 气动液压动力.五阀口方向控制阀.第1部分:无电气连器的安装界面 | Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector |
JIS B8375-2-2000 | 气动液压动力.五阀口方向控制阀.第2部分:带任选电气连接器的安装界面 | Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector |
JIS B8375-3-2000 | 气动液压动力.五阀口方向控制阀.第3部分:阀功能传送代码系统 | Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions |
JIS B8377-1-2002 | 液压动力系统和部件.气缸的检验和试验.第1部分:气压缸的验收试验 | Fluid power systems and components -- Inspection and test of cylinders -- Part 1: Acceptance tests for pneumatic cylinders |
JIS B8377-2-2002 | 流体动力系统和部件.气缸的检验和试验.第2部分:液压气缸的验收试验 | Fluid power systems and components -- Inspection and test of cylinders -- Part 2: Acceptance tests for hydraulic cylinders |
JIS B8382-2000 | 液压流体动力.无源活塞置换泵和马达.推导容量的测定 | Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity |
JIS B8383-2000 | 液压流体动力.泵和马达.几何位移量 | Hydraulic fluid power -- Pumps and motors -- Geometric displacements |
JIS B8384-2000 | 液压动力.正排量泵、电机和整体传动装置.稳态性能的测定 | Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance |
JIS B8385-2000 | 液压动力.泵、电机和整体传动装置.参数定义和字母符号 | Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols |
JIS B8386-2000 | 液压流体动力.阀门.压差/流体特性的测定 | Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics |
JIS B8387-2000 | 液压流体动力.四孔模块通气阀和四孔方向控制阀.02,03,05尺寸.夹持尺寸 | Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions |
JIS B8388-2000 | 液压动力系统和元件.带接地的三针电插头连接器.特性和要求 | Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements |
JIS B8389-2000 | 液压动力系统和元件.带接地的两针电插头连接器.特性和要求 | Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements |
JIS B8390-2000 | 气动液压动力.用可压缩流体的元件.流动速率特性的测定 | Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics |
JIS B8394-1-2000 | 液压动力.弹性体增能用、塑料面密封液压缸.尺寸和公差.第1部分:活塞密封液压缸 | Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 1: Piston seal housings |
JIS B8394-2-2000 | 液压动力.弹性体增能用、塑料面密封液压缸.尺寸和公差.第2部分:杆密封液压缸 | Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 2: Rod seal housings |
JIS B8397-1-2001 | 液压流体动力.电动机特性的测定.第1部分:在恒定低速和恒压下进行的测定 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure |
JIS B8397-2-2001 | 液压流体动力.电动机特性的测定.第2部分:可起动性 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability |
JIS B8397-2002 | 液压流体动力.带分离器的气-液蓄压器.压力和容积的范围及特征数量 | Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities |
JIS B8397-3-2001 | 液压流体动力.电动机特性的测定.第3部分:在恒定流量和恒定扭矩下进行的测定 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque |
JIS B8398-2002 | 液压流体动力.气-液蓄压器.气体口的尺寸 | Hydraulic fluid power -- Gas-loaded accumulators -- Dimensions of gas ports |
JIS B8399-2002 | 液压流体动力.带分离器的气-液蓄压器.优选液压端口的选择 | Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports |
JIS B8404-1-2005 | 液压传动.气缸.16MPa中型和25MPa系列气缸.附件安装尺寸.第1部分:杆端普通眼 | Hydraulic fluid power -- Cylinders -- 16MPa medium and 25MPa series -- Accessory mounting dimensions -- Part 1: Rod end plain eyes |
JIS B8404-2-2005 | 液压传动.气缸.16MPa中型和25MPa系列气缸.附件安装尺寸.第2部分:杆端球形眼 | Hydraulic fluid power -- Cylinders -- 16 MPa medium and 25 MPa series -- Accessory mounting dimensions -- Part 2: Rod end spherical eyes |
JIS B8404-3-2005 | 液压传动.气缸.16MPa中型和25MPa系列气缸.附件安装尺寸.第3部分:杆端和支架 | Hydraulic fluid power -- Cylinders -- 16MPa medium and 25MPa series -- Accessory mounting dimensions -- Part 3: Rod end and bracket |
JIS B8404-4-2005 | 液压传动.气缸.带32 mm至200 mm气缸孔的16MPa小型系列.附件安装尺寸.第4部分:杆端和支架 | Hydraulic fluid power -- Cylinders -- 16 MPa compact series with bores from 32 mm to 200 mm -- Accessory mounting dimensions -- Part 4: Rod end and bracket |
JIS B8404-5-2005 | 液压传动.气缸.带32 mm至200 mm的气缸孔的16MPa小型系列.附件安装尺寸.第5部分:杆端 | Hydraulic fluid power -- Cylinders -- 16MPa compact series with bores from 250 mm to 500 mm --Accessory mounting dimensions -- Part 5: Rod end |
JIS B8651-2002 | 比例电动液压减压阀试验方法 | Test methods for electro-hydraulic proportional pressure relief valves |
JIS B8652-2002 | 电动液压比例安全阀和减压阀的试验方法 | Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves |
JIS B8653-2002 | 电动液压比例节流阀试验方法 | Test methods for electro-hydraulic proportional metering valves |
JIS B8654-2002 | 电动液压比例串联型流量控制阀试验方法 | Test methods for electro-hydraulic proportional series flow control valves |
JIS B8655-2002 | 电动液压比例串联型定向流量控制阀试验方法 | Test methods for electro-hydraulic proportional directional series flow control valves |
JIS B8656-2002 | 电动液压比例旁通流量控制阀试验方法 | Test methods for electro-hydraulic proportional bypass flow control valves |
JIS B8657-2002 | 电动液压比例定向旁通流量控制阀试验方法 | Test methods for electro-hydraulic proportional directional bypass flow control valves |
JIS B8659-1-2000 | 液压流体动力.电气调节液压控制阀门.第1部分:四路直流控制阀门的试验方法 | Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves |
JIS B8659-2-2002 | 液压流体动力.电气调节液压控制阀门.第2部分:三路定向流量控制阀门的试验方法 | Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves |
JIS B8660-2000 | 液压动力.流量和压力控制阀.试验方法 | Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods |
JIS B8661-2002 | 液压流体动力.电控油压泵试验方法 | Hydraulic fluid power -- Test method for electrically controlled oil hydraulic pumps |
JIS B8663-2001 | 液压流体动力.液压缸.活塞和杆用方断面轴承圈的盖尺寸 | Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
JIS B8664-2001 | 液压流体动力.压力控制阀(不包括减压阀)、顺序活门、释荷阀、节流阀和止回阀. 安装表面 | Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces |
JIS B8665-2001 | 液压流体动力.阀门安装表面和插装式阀腔的识别代码 | Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities |
JIS B8666-2001 | 液压流体动力.减压阀.安装表面 | Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces |
JIS B8667-2004 | 液压传动.压力开关.安装表面 | Hydraulic fluid power -- Pressure switches -- Mounting surfaces |
JIS B9930-2000 | 液压流体动力.流体污染.用显微镜计数方法测定颗粒污染度 | Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope |
JIS B9932-2003 | 液压流体动力.流体自动颗粒计数器的校准 | Hydraulic fluid power -- Calibration of automatic particle counters for liquids |
JIS B9933-2000 | 液压流体动力.流体.限定固体颗粒污染水平的编码 | Hydraulic fluid power -- Fluids -- Code for defining the level of contamination by solid particles |
JIS B9934-2000 | 液压流体动力.使用消光原理自动计数测定颗粒污染 | Hydraulic fluid power -- Determination of particulate contamination by automatic counting using the light extinction principle |
JIS B9935-2001 | 液压流体动力.液体的在线自动粒子计数系统.校正和验证方法 | Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation |
JIS B9936-2001 | 液压流体动力.粒子污染分析.从工作系统的作业线上提取流体样品 | Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system |
JIS B9937-2001 | 液压流体动力.液体样品容器.合格鉴定和控制、清洁方法 | Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods |
JIS B9938-2002 | 液压流体动力.耐火流体.使用导则 油圧 ― 難燃性作動油 ― 使用指針 | Hydraulic fluid power -- Fire-resistant (FR) fluids -- Guidelines for use |
JIS B9939-1-2003 | 液压流体动力.测量技术.第1部分:一般测量原则 油圧 ― 測定技術 ― 第1部:一般測定原則 | Hydraulic fluid power -- Measurement techniques -- Part 1: General measurement principles |
JIS B9939-2-2003 | 液压流体动力.测量技术.第2部分:封闭管道中平均稳态压力的测量 油圧 ― 測定技術 ― 第2部:管路における平均定常圧力の測定 | Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit |
JIS D2601-2006 | 汽车零件.使用非石油基制动流体的液压制动系统的制动软管组件 自動車部品―非鉱油系液圧ブレーキホースアセンブリ | Automotive parts -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
JIS D2603-2005 | 汽车部件.使用非石油基液压制动液的液压制动系统用液压制动主缸 自動車部品-非鉱油系液圧ブレーキマスタシリンダ | Automotive parts -- Hydraulic brake master cylinders for hydraulic brake systems using a non-petroleum base hydraulic brake fluid |
JIS D2604-1998 | 汽车零部件.使用非石油基制动流体的液压制动系统的液压车轮制动缸 自動車部品 ― 非鉱油系液圧ブレーキホイールシリンダ | Automotive parts -- Hydraulic brake wheel cylinders for hydraulic brake systems using a non-petroleum base brake fluid |
JIS D2605-2005 | 汽车部件.使用非石油基液压制动液的液压制动缸用橡胶皮碗 自動車部品-非鉱油系液圧ブレーキシリンダのゴムカップ | Automotive parts -- Rubber cups for hydraulic braking cylinders using a non-petroleum base hydraulic brake fluid |
JIS D2608-1998 | 汽车零件.使用非石油基液压制动流体的液压制动轮缸的橡胶套管 | Automotive parts -- Rubber boots for hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid |
JIS D2609-2002 | 道路车辆.使用非石油基液压制动液的液压盘式制动缸的弹性密封件 | Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid |
JIS D2610-2005 | 汽车部件.使用非石油基液压制动液体的液压制动主油缸储油箱用膜片衬垫 | Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
JIS D2611-1995 | 汽车部件.使用非石油基液压制动油的液压盘式制动器油缸的弹性防尘罩 | Automotive parts -- Elastomeric boots of hydraulic disc brakes cylinders using a non-petroleum base hydraulic brake fluid |
JIS D2612-2005 | 汽车部件.使用非石油基液压制动液的液压制动主油缸用储油箱密封件 | Automotive parts -- Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid |
JIS D8101 AMD 1-2006 | 汽车用便携式液压千斤顶(修改件1) | Portable hydraulic jacks for automobiles (Amendment 1) |
JIS D8101-1994 | 汽车用便携式液压千斤顶 | Portable hydraulic jacks for automobiles |
JIS D8102-1994 | 汽车用液压千斤顶 | Hydraulic garage jacks for automobiles |
JIS F1024-1998 | 小船.液压操纵方向系统 | Small craft -- Hydraulic steering systems |
JIS F6720-1995 | 船液压舵机的工厂试验方法 | Shop test method for ships' hydraulic steering gears |
JIS F6721-1995 | 船用液压舵机液压泵的工厂试验方法 | Shop test method for oil pressure pumps at hydraulic steering gears for ships |
JIS F8079-1989 | 船用电气设施.第204部分:系统设计.电动及电动液压转向机构 | Electrical installations in ships Part 204 System design -- Electric and electrohydraulic steering gear |
JIS K6330-8-1998 | 橡胶和塑料软管的测试方法.第8部分:无挠曲的液压脉冲试验 | Testing methods for rubber and plastics hoses -- Part 8: Hydraulic-pressure impulse test without flexing |
JIS K6349-1-1999 | 液压用钢丝增强橡胶软管.第1部分:橡胶软管和软管组件.线增强液压型.规范 | Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification |
JIS K6349-2-1999 | 液压用钢丝增强橡胶软管.第2部分:橡胶软管和软管组件.橡胶包覆的螺旋线增强液压型.规范 | Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification |
JIS K6349-3 ERRATUM 1-2000 | 液压系统用钢丝增强橡胶软管.第3部分:钢丝增强橡胶软管(勘误 1) | Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (Erratum 1) |
JIS K6349-3-1999 | 液压用钢丝增强橡胶软管.第3部分:线增强橡胶软管 | Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses |
JIS K6375-1999 | 塑料软管和软管组件.液压型织物增强的热塑性塑料.规范 | Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification |
JIS K6379-1999 | 塑料软管和软管组件.织物增强的液压型.规范 | Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification |
JIS W0105-1984 | 飞机液压和气压系统术语汇编 | Glossary of terms for aircraft hydraulic and pneumatic systems |
JIS W1842-1994 | 航空航天.恒定置换液压马达.一般规范 | Aerospace -- Constant displacement hydraulic motors -- General specifications |
JIS W2909-1982 | 飞机液压系统及应急气动系统的试验 | Test for aircraft hydraulic and emergency pneumatic systems |
JIS W2913-1982 | 飞机液压系统元件的通用规范 | Hydraulic system components, aircraft, general specification for |
JIS W2921-1993 | 航空航天.液压系统和部件.压力和温度分类 | Aerospace -- Fluid systems and components -- Pressure and temperature classifications |
JIS W2922-1996 | 飞行器.液压元件.认可元件用指示流体的标记 | Aircraft -- Hydraulic components -- Marking to indicate fluid for which component is approved |
JIS W2923-2000 | 航空航天.流体系统和部件.液压流体的固体颗粒污染物的系统取样和测量方法 | Aerospace -- Fluid systems and components -- Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
JIS W2924-2002 | 航空航天.液压流体的清洁度分类 | Aerospace -- Cleanliness classification for hydraulic fluids |
JIS W2925-2002 | 航空航天.液压系统流体污染.取样点的位置和取样的准则 | Aerospace -- Hydraulic system fluid contamination -- Location of sampling points and criteria for sampling |
编号 | 中文名称 | 英文名称 |