5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




日本管道标准(JIS pipe standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
JIS A0015-1976 住宅管道装置的模数协调尺寸 Modular co-ordinating sizes of piping unit for dwellings
JIS A4009-1997 空气管道组件 Components of air duct
JIS A4413 AMD 1-2006 住宅用管道装置(修改件1)
住宅用配管ユニット(追補1)
Piping units for dwellings (Amendment 1)
JIS A4413-1991 住宅用管道装置
住宅用配管ユニット
Piping units for dwellings
JIS B0011-1-1998 技术制图.管道的简化表示法.第1部分:总则和正交表示法 Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation
JIS B0011-2-1998 技术制图.管道的简化表示法.第2部分:等容表示法 Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric representation
JIS B0011-3-1998 技术制图.管道的简化表示法.第3部分:通风和排水系统的终端部件 Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems
JIS B0109-4-1999 往复式内燃机.元件和系统词汇.第4部分:增压和空气/排气管道系统 Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 4: Pressure charging and air/exhaust gas ducting systems
JIS B2293-2000 真空技术.管道配件.装配尺寸 Vacuum technology -- Pipeline fittings -- Mounting dimensions
JIS B8471-2004 水管道.电磁阀 Water pipe line -- Solenoid valves
JIS B8472-1994 蒸汽管道.电磁阀 Steam pipe line -- Solenoid valves
JIS B8473-1994 燃油管道.电磁阀 Fuel oil pipe line -- Solenoid valves
JIS B8602-2002 致冷剂管道法兰盘 Pipe flanges for refrigerants
JIS B8615-1-1999 非管道式空调和热泵.性能试验和评定 Non-ducted air conditioners and heat pumps -- Testing and rating for performance
JIS B8615-2-1999 管道通风空调和空气对空气热泵.性能的试验和额定值 Ducted air-conditioners and air-to-air heat pumps -- Testing and rating for performance
JIS B8627-2-2000 燃气发动机驱动的热泵空调器.第2部分:无管道输送的燃气发动机驱动的热泵空调器.性能的试验和额定值 Gas engine driven heat pump air conditioners -- Part 2: Non-ducted gas engine driven heat pump air conditioners -- Testing and rating for performance
JIS B8627-3-2000 燃气发动机驱动的热泵空调器.第3部分:有管道输送的燃气发动机驱动的热泵空调器.性能的试验和额定值 Gas engine driven heat pump air conditioners -- Part 3: Ducted gas engine driven heat pump air conditioners -- Testing and rating for performance
JIS B9939-2-2003 液压流体动力.测量技术.第2部分:封闭管道中平均稳态压力的测量 Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit
JIS C8425-1984 室内配线用塑料面配线管道 Plastic surface raceways for interior wiring
JIS D3607-1-2002 柴油发动机.高压燃料喷射管道用钢制管件.第1部分:无缝冷拉单壁管件的要求
ディーゼル機関 ― 高圧燃料噴射管の鋼管 ― 第1部:冷間仕上継目無単層鋼管の要求事項
Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes
JIS D3607-2-2002 柴油发动机.高压燃料喷射管道用钢制管件.第2部分:复合管件的要求
ディーゼル機関 ― 高圧燃料噴射管の鋼管 ― 第2部:複合鋼管の要求事項
Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 2: Requirements for composite tubes
JIS F0014-1979 造船术语汇编.(船体部分.管道) Glossary of terms for shipbuilding (Hull part -- Piping)
JIS F0301-1990 小船管道系统绝热方案 Schemes of thermal insulation of piping for small ships
JIS F0302-1998 造船.小船空调管道绝热作业标准操作规程 Shipbuilding -- Standard practice for thermal insulation work for small ships' airconditioning ducts
JIS F0602-1995 造船.输油管道系统非石棉衬垫.应用标准 Shipbuilding -- Non-asbestos gaskets to cargo piping system -- Application standard
JIS F3995-2000 挖泥船排放管道的橡胶套管 Rubber sleeves for dredge discharge pipes
JIS F7005-1984 船舶管道系统的识别 Identification of piping system on board ships
JIS F7006-2004 造船.管道系统.图形符号 Shipbuilding -- Piping systems -- Graphic symbols
JIS F7008-2001 管道隔热标准规范 Standard specification of thermal insulation for piping
JIS F7101-2002 造船.机械设备的管道.标准流速
船舶機関部配管 ― 標準流速
Shipbuilding -- Pipes of machinery -- Standard velocity of flow
JIS F7203-1998 造船.机械设备空间和管道的舱底泥盒.一般设计特性 Shipbuilding -- Bilge mud boxes for machinery spaces and tunnels -- General design characteristics
JIS F7211-2004 造船.带5K阀门的管道玻璃类型液位表 Shipbuilding -- Tube glass type level gauges with 5K valves
JIS F7212-2004 造船.带自锁阀门的管道玻璃类型液位表 Shipbuilding -- Tube glass type level gauges with self closing valves
JIS G3132-2005 管道用热轧碳素钢带材 Hot-rolled carbon steel strip for pipes and tubes
JIS G5525-2000 铸铁排水管道和管件 Cast-iron drainage pipes and fittings
JIS G5528 AMD 1-2006 球墨铸铁管道及配件内壁用环氧粉末覆层(修改件1) Epoxy-powder coating for interior of ductile iron pipes and fittings (Amendment 1)
JIS H0515-1992 钛管道和管件的涡流检验 Eddy current inspection of titanium pipes and tubes
JIS H0516-1992 钛管道和管件的超声波检验 Ultrasonic inspection of titanium pipes and tubes
JIS K0804-1998 气体检测器管道测量系统(污染长度型) Gas detector tube measurement system (Length-of-stain type)
JIS K6795-1998 交叉链接聚乙烯管道(PE-X).预定强度下的时间和温度效应 Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
JIS K6796-1998 交叉链接聚乙烯(PE-X)制管道和配件.用胶含量测定法评估交叉链接程度 Pipes and fitting made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
JIS K6812-2003 聚烯烃管道、配件和复合物中颜料或炭黑分散程度的评估方法 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
JIS K7013-1997 增强式纤维塑料管道 Fibre reinforced plastic pipes
JIS K7014-1997 增强式纤维塑料管道用配件和接头 Fittings and joints for fibre reinforced plastic pipes
JIS K7020-1998 玻璃纤维增强热固性塑料(GRP)管道和配件.回归分析方法及其应用 Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Methods for regression analysis and their use
JIS K7030-1997 玻璃纤维增强热固性塑料(GRP)制管道和配件.与压力相关的术语定义、包括术语之间的关系及安装和连接的术语 Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) -- Definitions of terms relating pressure, including relationship between them, and terms for installation and jointing
JIS K7031-2003 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在短期内压下管壁密封性检定的试验方法 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure
JIS K7032-2002 塑料管道系统.玻璃增强热塑(GRP)管道.初始的特定环硬性的测定 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
JIS K7033-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)制管道.初始拉伸性能的测定 Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial tensile properties
JIS K7034-2003 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在偏移条件下内截面耐化学侵蚀的测定 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack from the inside of a section in a deflected condition
JIS K7035-1998 塑料管道系统. 玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下蠕变因子的测定和长期特定环硬度的计算 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
JIS K7036-1998 塑料管道系统. 玻璃纤维增强热固性塑料(GRP)管道和配件.螺栓连接的法兰接头设计的检定试验方法 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints
JIS K7037-1998 塑料管道系统. 玻璃纤维增强热固性塑料(GRP)管道.表观初始圆周拉伸强度的测定 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength
JIS K7038-1998 塑料管道系统. 玻璃纤维增强热固性塑料(GRP)管道.初始环偏移度抗性检定的试验方法 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test method to prove the resistance to initial ring deflection
JIS K7039-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下长期最终弯曲应力的测定和长期最终相应环偏移 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions
JIS K7040-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)部件.用重量分析法测定成分的总量 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method
JIS K7042-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.粘合的或绕接的钢性接头设计的检定试验方法 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped rigid joints
JIS T7101-1997 医疗气体管道系统 Medical gas pipeline systems
JIS Z2287-2003 锅炉管道金属材料的蒸汽氧化试验方法 Method for steam oxidation test of boiler tube metallic materials
JIS Z3050-1995 管道焊接的无损检测方法 Method of nondestructive examination for weld of pipeline
编号中文名称英文名称

返回