编号 | 中文名称 | 英文名称 |
---|---|---|
JIS A1439-2004 | 建筑物中密封和门窗玻璃用密封剂的试验方法 | Testing methods of sealants for sealing and glazing in buildings |
JIS A1470-2-2002 | 调节室内湿度的建筑材料的吸湿或脱湿的试验方法.第2部分:密封箱法 | Test method of adsorption/desorption efficiency for building materials to regulate an indoor humidity -- Part 2: Sealed box method |
JIS A5750-2000 | 建筑物中门窗和面板接缝用弹性泡沫预制密封垫 | Elastomeric cellular preformed gaskets for windows, doors and joints of panel in buildings |
JIS A5756 AMD 1-2006 | 建筑衬垫和建筑结构衬垫.门窗玻璃安装和嵌板密封用预成形固态硫化橡胶材料(修改件1) | Building gaskets and Building structural gaskets -- Materials in preformed solid vulcanizates used for sealing glazing and panels (Amendment 1) |
JIS A5756-1997 | 建筑衬垫和建筑结构衬垫.门窗玻璃安装和嵌板密封用预成形固态硫化橡胶材料 | Building gaskets and Building structural gaskets -- Materials in preformed solid vulcanizates used for sealing glazing and panels |
JIS A5758-2004 | 建筑物中密封和门窗玻璃用密封剂 | Sealants for sealing and glazing in buildings |
JIS B0116-1978 | 包装材料和密封垫术语汇编 | Glossary of terms for packings and gaskets |
JIS B2207 AMD 1-2006 | 具有全密封垫铝合金管法兰的计算基础(修改件1) | Basis for calculation of aluminium alloy pipe flanges with full face gasket (Amendment 1) |
JIS B2355-1-2000 | 流体动力用和通用的连接件.带ISO261螺纹和 O 形环密封件的端口和螺柱端头.第1部分:截断平头壳体内带有 O 形 | Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing |
JIS B2355-2-2000 | 流体动力用和通用连接件.带ISO261螺纹和 O 形环密封件的端口和螺柱端头.第2部分:大功能(S系列)螺柱端头. | Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 2: Heavy-duty (S series) stud ends -- Dimensions, design, test methods and requirements |
JIS B2355-3-2000 | 流体动力用和通用连接件.带ISO261螺纹和 O 形环密封件的端口和螺柱端头.第3部分:小功能(L 系列)螺柱端头. | Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 3: Light-duty (L series) stud ends -- Dimensions, design, test methods and requirements |
JIS B2356-1-2001 | 一般用途的和流体动力用接头.带弹性密封件或金属与金属间密封件的ISO 261螺纹的端口和螺柱端头.第1部分:螺 | Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports |
JIS B2356-2-2000 | 流体动力用和通用连接件.带ISO 261螺纹,带有弹性体或金属对金属密封件的端口和螺柱断头.第2部分:带弹性密 | Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 2: Stud ends with elastomeric sealing (type E) |
JIS B2358-1-2001 | 一般用途的和流体动力用接头.带ISO 261螺纹和O形环密封件的端口和螺柱端头.第1部分:在截断外壳体内装有O形 | Connections for general use and fluid power -- Ports and stud ends with ISO 725 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing |
JIS B2402-1-2002 | 旋转轴唇形密封件.第1部分:公称尺寸和公差 オイルシール ― 第1部:寸法及び許容差 | Rotary shaft lip type seals -- Part 1: Nominal dimensions and tolerances |
JIS B2402-2-2002 | 旋转轴唇形密封件.第2部分:词汇 オイルシール ― 第2部:用語 | Rotary shaft lip type seals -- Part 2: Vocabulary |
JIS B2402-3-2002 | 旋转轴唇形密封件.第3部分:储存、搬运和安装 オイルシール ― 第3部:保管,取扱い及び取付 | Rotary shaft lip type seals -- Part 3: Storage, handling and installation |
JIS B2402-4-2002 | 旋转轴唇形密封件.第4部分:性能试验程序 オイルシール ― 第4部:性能試験方法 | Rotary shaft lip type seals -- Part 4: Performance test procedures |
JIS B2402-5-2002 | 旋转轴唇形密封件.第5部分:目视缺陷的鉴定 オイルシール ― 第5部:外観欠陥 | Rotary shaft lip type seals -- Part 5: Identification of visual imperfections |
JIS B2403-1995 | V型密封件 Vパッキン | V packings |
JIS B2405-2003 | 机械密封件.一般要求 メカニカルシール通則 | Mechanical seals -- General requirements |
JIS B2405 AMD 1-2006 | 机械密封.通用要求(修改件1) メカニカルシール通則(追補1) | Mechanical seals -- General requirements (Amendment 1) |
JIS B2406-1991 | O形密封圈装配槽.设计标准 Oリング取付溝部の形状・寸法 | O-rings housings -- Design criteria |
JIS B2407-1995 | O型密封圈的保护垫圈 Oリング用バックアップリング | Back-up rings for O-rings |
JIS B2409-2002 | 液压流体动力.密封装置.油压往复设备的密封件性能评定的标准试验方法 油圧 ― 密封装置 ― 油圧用往復動シールの性能評価標準試験方法 | Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
JIS B2410-2005 | O型密封圈.工业用弹性材料的适宜性 Oリング-ゴム材料の選定指針 | O-rings -- Suitability of elastomeric materials for industrial applications |
JIS B8367-2-2002 | 液压气缸的安装尺寸.第2部分:单杆.16 MPa系列、方盖、系杆密封型液压气缸(气缸内径25 mm 至 200 mm) | Mounting dimensions for hydraulic cylinders -- Part 2: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 25 mm to 200 mm) |
JIS B8367-3-2002 | 液压气缸的安装尺寸.第3部分:单杆.16 MPa系列、方盖、系杆密封型液压气缸(气缸内径250 mm 至 500 mm) | Mounting dimensions for hydraulic cylinders -- Part 3: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 250 mm to 500 mm) |
JIS B8367-5-2002 | 液压气缸的安装尺寸.第5部分:单杆.10 MPa系列、方盖、系杆密封型液压气缸(汽缸内径40 mm 至 200 mm) | Mounting dimensions for hydraulic cylinders -- Part 5: Single rod -- 10 MPa series, square cover and tie rod tightend type (Bores from 40 mm to 200 mm) |
JIS B8368-1-2002 | 气压缸的安装尺寸.第1部分:单杆.带固定安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 2 | Mounting dimensions for pneumatic cylinders -- Part 1: Single rod -- 1 MPa series, square cover and tie rod tightend type with fixed mounting devices (Bores from 32 mm to 250 mm) |
JIS B8368-2-2002 | 气压缸的安装尺寸.第2部分:单杆.带可分离安装装置的1 MPa系列、方盖、系杆密封型液压气缸(汽缸内径32 mm 至 | Mounting dimensions for pneumatic cylinders -- Part 2: Single rod -- 1 MPa series, square cover and tie rod tightend type with detachable mounting devices (Bores from 32 mm to 320 mm) |
JIS B8394-1-2000 | 液压动力.弹性体增能用、塑料面密封液压缸.尺寸和公差.第1部分:活塞密封液压缸 | Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 1: Piston seal housings |
JIS B8394-2-2000 | 液压动力.弹性体增能用、塑料面密封液压缸.尺寸和公差.第2部分:杆密封液压缸 | Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 2: Rod seal housings |
JIS B8396-2000 | 流体动力系统和元件.气缸.往复运功用的活塞和活塞杆密封件的外套.尺寸和公差 | Hydraulic fluid power -- Cylinders -- Housings for piston and rod seals in reciprocating applications -- Dimensions and tolerances |
JIS C4306-2005 | 6kV密封绕组式配电变压器 | 6kV Encapsulated-winding distribution transformers |
JIS C5402-12-6-2002 | 电子设备连接器.试验和测量.第12-6部分:钎焊试验.试验12f:机器钎焊时连接件密封耐焊剂和清洗剂性能 | Connectors for electronic equipment -- Tests and measurements -- Part 12-6: Soldering tests -- Test 12f: Sealing against flux and cleaning solvents in machine soldering |
JIS C5402-14-7-2002 | 电子设备连接器.试验和测量.第14-7部分:密封试验.试验14g:水冲击试验 | Connectors for electronic equipment -- Tests and measurements -- Part 14-7: Sealing tests -- Test 14g: Impacting water |
JIS C60068-2-17-2001 | 基本环境试验过程.第2部分:试验.试验Q:密封 | Basic environmental testing procedures -- Part 2: Tests -- Test Q: Sealing |
JIS C8705-2006 | 密封可再充电式镍镉单电池 | Sealed nickel-cadmium rechargeable single cells |
JIS C8712-2006 | 便携设备用便携式密封二次电池及由其制成的蓄电池的安全要求 | Safety requirements for portable sealed secondary cells, and batteries made from them, for use in portable applications |
JIS C8713-2006 | 包括碱性或其他非酸性电解液的二次电池和蓄电池.密封便携式二次电池和蓄电池的机械试验 | Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Mechanical tests for sealed portable secondary cells and batteries |
JIS C9730-2-4-2004 | 家用和类似用途的自动电气控制装置.第2-4部分:密封和半密封型电动压缩机用热电机保护器的特殊要求 | Automatic electrical controls for household and similar use -- Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
JIS D2609-2002 | 道路车辆.使用非石油基液压制动液的液压盘式制动缸的弹性密封件 | Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid |
JIS D2612-2005 | 汽车部件.使用非石油基液压制动液的液压制动主油缸用储油箱密封件 | Automotive parts -- Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid |
JIS D3105-1992 | 汽车发动机用气缸盖密封垫 | Cylinder head gaskets for automobile engines |
JIS F8801-2002 | 造船.电气设备用防水电缆密封套 | Shipbuilding -- Watertight cable glands for electric appliance |
JIS F8802-1987 | 船舶舱壁和甲板用电缆密封套 | Marine cable glands for bulkhead and deck |
JIS F8838-2004 | 造船.防水密封插头和插座盒 | Shipbuilding -- Watertight type plugs and socket-outlet boxes |
JIS H8683-1-1999 | 铝及铝合金阳极氧化覆层密封质量试验方法.第1部分:染料点滴试验方法 | Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Dye spot test method |
JIS H8683-2-1999 | 铝及铝合金阳极氧化覆层密封质量试验方法.第2部分:磷铬酸溶液浸入的试验方法 | Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Phosphoric-chromic acid solution immersion test method |
JIS H8683-3-1999 | 铝及铝合金阳极氧化覆层密封质量试验方法.第3部分:导纳试验方法 | Test methods for sealing quality of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Admittance test method |
JIS K5533-2003 | 天然漆密封剂 | Lacquer sealers |
JIS K5663-2003 | 合成树脂乳胶漆和密封剂 | Synthetic resin emulsion paint and sealer |
JIS K6380-1999 | 橡胶密封材料 | Rubber packing material |
JIS K6820 AMD 1-2006 | 液体密封剂(修改件1) | Fluid sealants (Amendment 1) |
JIS K6820-1995 | 液体密封剂 | Fluid sealants |
JIS K6885-2005 | 螺纹密封用未烧结聚四氟乙烯带 | Unsintered polytetrafluoroethylene tapes for thread sealing |
JIS K7031-2003 | 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在短期内压下管壁密封性检定的试验方法 | Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the leaktightness of the wall under short-term internal pressure |
JIS R3209-1998 | 密封绝缘玻璃 | Sealed insulating glass |
JIS S2031-2007 | 密封型燃油空间加热器 | Closed type oil burning space heaters |
JIS S6020-1992 | 朱砂密封墨盒 | SHUNIKU (Cinnabar seal-ink pads) |
JIS T6522-2005 | 牙根管密封材料 | Dental root canal sealing materials |
JIS T6524-2005 | 牙科.聚合凹纹和裂纹密封剂 | Dentistry -- Polymer-based pit and fissure sealants |
JIS W1831-1994 | 航空航天.流体系统用带螺纹的和密封的联结件.尺寸 | Aerospace -- Couplings, threaded and sealed, for fluid systems -- Dimensions |
JIS W2014-2002 | 航空航天系统保护用涂饰剂、涂漆及密封剂 | Finishes, coatings and sealants for the protection of aerospace systems |
JIS Z1571-2005 | 食品和饮料用密封金属罐 | Hermetically sealed metal cans for food and drink |
JIS Z4821-1-2002 | 密封放射源.一般要求和分类 | Sealed radioactive sources -- General requirements and classification |
JIS Z4821-2-2002 | 密封放射源.漏泄试验方法 | Sealed radioactive sources -- Leakage test methods |
JIS Z7302-10-2002 | 密封垃圾再生燃料.第10部分:分解物的测试方法 | Densified refuse derived fuel -- Part 10: Test method for disintegrated contents |
JIS Z7302-4 ERRATUM 1-2000 | 密封垃圾的再生燃料.第4部分:灰分的测试方法(勘误1) | Densified refuse derived fuel -- Part 4: Test method for ash (Erratum 1) |
JIS Z7302-4 ERRATUM 2-2000 | 密封垃圾的再生燃料.第4部分:灰分的测试方法(勘误2) | Densified refuse derived fuel -- Part 4: Test method for ash (Erratum 2) |
JIS Z7302-5-2002 | 密封垃圾再生燃料.第5部分:金属含量的测试方法 | Densified refuse derived fuel -- Part 5: Test methods of metals contents |
JIS Z7302-7-2002 | 密封垃圾再生燃料.第7部分:硫含量的测试方法 | Densified refuse derived fuel -- Part 7: Test method for sulfur content |
JIS Z7302-8-2002 | 密封垃圾再生燃料.第8部分:元素分析的试验方法 | Densified refuse derived fuel -- Part 8: Test method for ultimate analysis |
JIS Z7302-9-2002 | 密封垃圾再生燃料.第9部分:表观体密度的测试方法 | Densified refuse derived fuel -- Part 9: Test method for apparent bulk density |
编号 | 中文名称 | 英文名称 |