5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




ISO钢铁标准(ISO steel standards)翻译目录查询

返回

编号中文名称英文名称
ISO 1035-1-1980 热轧钢棒材 第1部分:圆钢尺寸 Hot-rolled steel bars; Part 1 : Dimensions of round bars
ISO 10792-1-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第1部分:米制系列 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series
ISO 10792-2-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第2部分:英制系列 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series
ISO 10792-3-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第3部分:技术规范 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification
ISO 11124-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分:一般介绍及分类 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification
ISO 11124-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁丸 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit
ISO 11124-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第3部分:高碳铸钢丸和砂 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit
ISO 11124-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分:低碳铸钢丸 Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot
ISO 11125-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第1部分:抽样 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
ISO 11125-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution
ISO 11125-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第3部分:硬度测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness
ISO 11125-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第4部分:表观密度测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density
ISO 11125-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒的百分比和微结构的测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure
ISO 11125-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter
ISO 11125-7-1993 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第7部分:含水量测定 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
ISO 11126-1 Technical Corrigendum 1-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1
ISO 11126-1 Technical Corrigendum 2-1997 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误2 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2
ISO 11126-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification
ISO 11126-10-2000 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第10部分:铁铅石榴石 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne
ISO 11126-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第3部分:铜精炼渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag
ISO 11126-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag
ISO 11126-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第5部分:镍精炼渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag
ISO 11126-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag
ISO 11126-7 Technical Corrigendum 1-1999 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 技术勘误1 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1
ISO 11126-7-1995 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
ISO 11126-8-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第8部分:橄榄石砂 Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand
ISO 11126-9-1999 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第9部分:十字石 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
ISO 11127-1-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第1部分:抽样 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling
ISO 11127-2-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution
ISO 11127-3-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第3部分:表观密度测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density
ISO 11127-4-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第4部分:通过玻璃载片试验评定硬度 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test
ISO 11127-5-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第5部分:含水量测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture
ISO 11127-6-1993 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第6部分:通过测量电导率测定水溶性杂质 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement
ISO 11127-7-1993 涂装油漆和有关产品前钢材预处理 非金属喷沙清理磨料的试验方法 第7部分:水溶性氯化物的测定 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides
ISO 1127-1992 不锈钢管 尺寸、公差和单位长度的公称质量 Stainless steel tubes; dimensions, tolerances and conventional masses per unit length
ISO 11408-1999 化学转化膜 钢铁上的黑色氧化膜 规范和试验方法 Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods
ISO 12858-1-1999 光学和光学仪器 大地测量仪器辅助装置 第1部分:殷钢水平支柱 Optics and optical instruments - Ancillary devices for geodetic instruments - Part 1: Invar levelling staffs
ISO 13520-2002 奥氏体不锈钢铸件中铁素体含量的测定 Determination of ferrite content in austenitic stainless steel castings
ISO 14343 AMD 1-2006 电焊消耗品.不锈钢和耐热钢电弧焊用焊丝电极、焊丝和焊条.分类.修改件1:埋弧焊和电渣焊用条状电极的补充 Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification; Amendment 1: Addition of strip electrodes for submerged arc welding and electroslag welding
ISO 14343-2002 电焊消耗品.不锈钢和耐热钢电弧焊用焊丝电极、焊丝和焊条.分类 Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification
ISO 1461-1999 钢铁制件的热浸锌层 规范和试验方法 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
ISO 15730-2000 金属和其他无机覆盖层 抛光作为精加工和钝化不锈钢的方法 Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel
ISO 15787-2001 技术产品文献 热处理钢铁部件 表述和表示 Technical product documentation - Heat-treated ferrous parts - Presentation and indications
ISO 16048-2003 耐腐蚀不锈钢紧固件的钝化 Passivation of corrosion-resistant stainless-steel fasteners
ISO 16143-1-2004 通用不锈钢.第1部分:扁平制品 Stainless steels for general purposes - Part 1: Flat products
ISO 16143-2-2004 通用不锈钢.第2部分:半成品棒材、杆材和型材 Stainless steels for general purposes - Part 2: Semi-finished products, bars, rods and sections
ISO 16143-3-2005 通用不锈钢.第3部分:钢丝 Stainless steels for general purposes - Part 3: Wire
ISO 17053-2005 钢铁.氧的测定.在惰性气体中熔化后的红外法 Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas
ISO 17058-2004 钢铁.砷含量的测定.分光光度法 Steel and iron - Determination of arsenic content - Spectrophotometric method
ISO 17633-2004 焊接消耗品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类 Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification
ISO 18286-2004 热轧不锈钢板.尺寸和形状公差 Hot-rolled stainless steel plates - Tolerances on dimensions and shape
ISO 2037-1992 食品工业用不锈钢管 Stainless steel tubes for the industry
ISO 2081-1986 金属覆盖层 钢铁上锌电镀层 Metallic coatings; Electroplated coatings of zinc on iron or steel
ISO 2082-1986 金属覆盖层 钢铁上镉电镀层 Metallic coatings; Electroplated coatings of cadmium on iron or steel
ISO 2338-1997 不淬硬钢和奥氏体不锈钢 圆锥销 Parallel pins, of unhardened steel and austenitic stainless steel
ISO 2851-1993 食品工业用不锈钢弯头和三通 Stainless steel bends and tees for the food industry
ISO 2852-1993 食品工业用不锈钢套管 Stainless steel clamp pipe couplings for the food industry
ISO 2853-1993 食品工业用不锈钢螺纹接管器 Stainless steel threaded couplings for the food industry
ISO 3506-1-1997 耐腐蚀不锈钢紧固件的机械性能 第1部分:螺栓、螺钉和螺柱 Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs
ISO 3506-2-1997 耐腐蚀不锈钢紧固件的机械性能 第2部分:螺母 Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts
ISO 3506-3-1997 耐腐蚀不锈钢紧固件的机械性能 第3部分:紧定螺钉及类似的不受拉应力的螺纹紧固件 Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress
ISO 3506-4-2003 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws
ISO 3581-2003 焊料.不锈钢和耐热钢的手工金属电弧焊接用涂剂焊条.分类 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification
ISO 3651-1-1998 不锈钢耐晶间腐蚀的测定 第1部分:奥氏体和铁素体奥氏体(二重)不锈钢 用失重测定法在硝酸介质中的腐蚀试验(H Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2-1998 不锈钢耐晶间腐蚀的测定 第2部分:铁素体、奥氏体和铁素体奥氏体(二重)不锈钢 在含硫酸介质中的腐蚀试验 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 3763-1976 钢材 评定非金属夹杂物含量的宏观方法 Wrought steels; Macroscopic methods for assessing the content of non-metallic inclusions
ISO 3823-1-1997 牙科旋转器械 牙钻 第1部分:不锈钢牙钻和硬质合金牙钻 Dental rotary instruments - Burs - Part 1: Steel and carbide burs
ISO 4144-2003 管道系统.符合ISO 7/1螺纹标准的不锈钢配件 Pipework - Stainless steel fittings threaded in accordance with ISO 7-1
ISO 4950-1 AMD 1-2003 高屈服强度扁钢材.第1部分:一般要求.修改件1 High yield strength flat steel products - Part 1: General requirements; Amendment 1
ISO 4950-1-1995 高屈服强度扁钢材.第1部分:一般要求 High yield strength flat steel products - Part 1: General requirements
ISO 4950-2 AMD 1-2003 高屈服强度扁钢材.第2部分:按正火或控制轧制条件提供的钢材.修改件1 High yield strength flat steel products - Part 2: Products supplied in the normalized or controlled rolled condition; Amendment 1
ISO 4950-2-1995 高屈服强度扁钢材.第2部分:按正火或受控轧制条件提供的钢材 High yield strength flat steel products - Part 2: Products supplied in the normalized or controlled rolled condition
ISO 4950-3 AMD 1-2003 高屈服强度扁钢材.第3部分:按热处理(淬火+回火)条件提供的钢材.修改件1 High yield strength flat steel products - Part 3: Products supplied in the heat-treated (quenched + tempered) condition; Amendment 1
ISO 4950-3-1995 高屈服强度扁钢材.第3部分:按热处理(淬火+回火)条件提供的钢材 High yield strength flat steel products - Part 3: Products supplied in the heat-treated (quenched + tempered) condition
ISO 5251-1981 不锈钢对焊配件 Stainless steel butt-welding fittings
ISO 5832-1-1997 外科植入物 金属材料 第1部分:锻造不锈钢 Implants for surgery - Metallic materials - Part 1: Wrought stainless steel
ISO 5832-9-1992 外科植入物.金属材料.第9部分:锻造高氮不锈钢 Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel
ISO 6931-1-1994 弹簧不锈钢 第1部分:钢丝 Stainless steels for springs - Part 1: Wire
ISO 6931-2-2005 弹簧不锈钢.第2部分:窄形带材 Stainless steels for springs - Part 2: Narrow strip
ISO 7046-2-1990 十字槽沉头(通用头型)螺钉 产品等级A级 第2部分:性能等级钢8.8级、不锈钢和有色金属 Cross recessed countersunk flat head screws (common head style); grade A; part 2: steel of property class 8.8, stainless steel and non-ferrous metals
ISO 7153-1 AMD 1-1999 外科器械 金属材料 第1部分:不锈钢 修改1 Surgical instruments - Metallic materials - Part 1: Stainless steel; Amendment A1
ISO 7153-1-1991 外科器械 金属材料 第1部分:不锈钢 Surgical instruments; metallic materials; part 1: stainless steel
ISO 7598-1988 适于按照ISO 7/1车螺纹用不锈钢管 Stainless steel tubes suitable for screwing in accordance with ISO 7-1
ISO 8074-1985 航空航天 奥氏体不锈钢零件的表面处理 Aerospace; Surface treatment of austenitic stainless steel parts
ISO 8075-1985 航空航天 可淬硬的不锈钢零件表面处理 Aerospace; Surface treatment of hardenable stainless steel parts
ISO 8249-2000 焊接 奥氏体和成双铁素体奥氏体镍-铬(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定 Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals
ISO 8442-2-1997 与食品料有关的材料和物质.餐具和凹型餐具.第2部分:不锈钢和镀银餐具的要求 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery
ISO 8501-2-1994 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部去除原有涂层后钢材的除锈等级 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
ISO 8501-3-2006 涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
ISO 8502-11-2006 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐浊度测定的现场方法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
ISO 8502-2-2005 涂覆油漆和相关产品前钢材衬底的预处理.表面清洁度的评定试验.第2部分:洁净表面氯化物的测定 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
ISO 8502-3-1992 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分:油漆前预处理后的钢材表面上的灰尘评定(压 Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
ISO 8502-4-1993 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分:油覆前凝露可能性的评定导则 Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application
ISO 8502-5-1998 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第5部分:涂装前钢材表面上氯化物测定(离子探测管法) Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
ISO 8502-6-2006 油漆和相关产品用前钢材的预处理.表面清洁度的评定试验.第6部分:提取分析用可溶性杂质.Bresle法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method
ISO 8502-8-2001 涂装油漆和有关产品前钢材的预处理 表面清洁度评定试验 第8部分:现场水分折射测定方法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture
ISO 8502-9-1998 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导测定法 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts
ISO 8503-1-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分:磨料喷射清理表面粗糙度的ISO评定 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8503-2-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分:磨料喷射清理表面的粗糙度定级方法 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure
ISO 8503-3-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分:ISO表面轮廓比较仪的校准方法和表 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure
ISO 8503-4-1988 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分:ISO表面轮廓比较仪的校准方法和表 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure
ISO 8503-5-2003 涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
ISO 8504-1-2000 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分:总则 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
ISO 8504-2-2000 涂装油漆和有关产品前钢材预处理.表面预处理方法.第2部分:磨料喷射清理 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
ISO 8504-3-1993 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗 Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning
ISO 8733-1997 不淬硬钢或奥氏体不锈钢内螺纹圆柱销 Parallel pins with internal thread, of unhardened steel or austenitic stainless steel
ISO 8734-1997 淬硬钢和马氏体不锈钢(定位销)圆柱销 Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
ISO 8735-1997 淬硬钢和马氏体不锈钢内螺纹圆锥销 Parallel pins with internal thread, of hardened steel and martensitic stainless steel
ISO 9327-5-1999 压力用途的钢锻件和轧制或锻造的棒材 交货技术条件 第5部分:不锈钢 Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels
ISO 9328-7-2004 压力用途扁钢产品.交货技术条件.第7部分:不锈钢 Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels
ISO 9329-4-1997 压力用途的无缝钢管 交货技术条件 第4部分:奥氏体不锈钢 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
ISO 9330-6-1997 压力用途的焊接钢管 交货技术条件 第6部分:奥氏体不锈钢管的焊接长度 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
ISO 9444-2002 连续热轧不锈钢带材、板材和切割长度.尺寸和形状公差 Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths - Tolerances on dimensions and form
ISO 9445-2002 连续冷轧不锈钢窄带材、宽带材、板材和切割长度.尺寸和形状公差 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form
ISO 9587-1999 金属和其他无机覆盖层 钢铁为减少氢脆危险的预处理 Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
ISO 9588-1999 金属和其他无机覆盖层 钢铁为减少氢脆危险的的后涂覆处理 Metallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
ISO 9626 AMD 1-2001 供制造医疗器械用的不锈钢针管 修改1 Stainless steel needle tubing for the manufacture of medical devices; Amendment 1
ISO 9626-1991 供制造医疗器械用的不锈钢针管 Stainless steel needle tubing for manufacture of medical devices
ISO/TR 15235-2001 涂装油漆和有关产品前钢材的预处理 收集的有关溶水盐污染水平的影响的信息 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
ISO/TR 17671-3-2002 焊接.金属材料焊接的推荐.第3部分:不锈钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
ISO/TR 4558-1985 小艇 不锈钢丝绳用索具螺旋扣、叉头、连接销和眼孔的主要尺寸 Small craft; Rigging screws for stainless steel wire rope; Principal dimensions for forks, connection pins and eye-holes
ISO/TS 15510-2003 不锈钢.化学成分 Stainless steels - Chemical composition
编号中文名称英文名称

返回