5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




ISO石油标准(ISO Petroleum standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
IEC 60962-1988 汽轮机用石油润滑油的维护与使用指南 Maintenance and use guide for petroleum lubricating oils for steam turbines
IEC 61221-2004 石油产品和润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
ISO 10239 Technical Corrigendum 1-2001 小艇 液化石油气(LPG)系统 技术勘误1 Small craft - Liquefied petroleum gas (LPG) systems; Technical corrigendum 1
ISO 10239-2000 小艇 液化石油气(LPG)系统 Small craft - Liquefied petroleum gas (LPG) systems
ISO 10307-1 Technical Corrigendum 1-1997 石油产品 残留在燃料油中的总沉淀物 第1部分:热过滤测定法 技术勘误1 Petroleum products - Total sediment in residual fuel oils - Part 1: Determination by hot filtration; Technical Corrigendum 1
ISO 10307-1-1993 石油产品 残留在燃料油中的总沉淀物 第1部分:热过滤测定法 Petroleum products; total sediment in residual fuel oils; part 1: determination by hot filtration
ISO 10307-2-1993 石油产品 残留在燃料油中的总沉淀物 第2部分:老化程序测定法 Petroleum products; total sediment in residual fuel oils; part 2: determination using standard procedures for ageing
ISO 10370 Technical Corrigendum 1-1996 石油产品.残碳的测定.数量法.技术勘误1 Petroleum products - Determination of carbon residue - Micro method; Technical Corrigendum 1
ISO 10370-1993 石油产品 残碳的测定 数量法 Petroleum products; determination of carbon residue; micro method
ISO 10400-1993 石油和天然气工业 套管、油管、钻杆和管线管性能公式与计算 Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe and line pipe properties
ISO 10405-2000 石油和天然气工业 套管和油管的维护和使用 Petroleum and natural gas industries - Care and use of casing and tubing
ISO 10407-1993 石油和天然气工业 钻井和生产设备 钻柱设计和操作极限 Petroleum and natural gas industries; drilling and production equipment; drill stem design and operating limits
ISO 10414-1-2001 石油和天然气工业 钻探油液的现场试验 第1部分:水基油液 Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
ISO 10414-2-2002 石油和天然气工业.钻井液的现场试验.第2部分:以油为基础的液体 Petroleum and natural gas industries - Field testing of drilling fluids - Part 2: Oil-based fluids
ISO 10416-2002 石油和天然气工业.钻用冲洗液.实验室试验 Petroleum and natural gas industries - Drilling fluids - Laboratory testing
ISO 10417-2004 石油和天然气工业.井下安全阀系统.设计、安装、操作和修整 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress
ISO 10418-2003 石油和天然气工业.近海生产装置.基础表面操作安全系统 Petroleum and natural gas industries - Offshore production installations - Basic surface process safety systems
ISO 10423-2003 石油和天然气工业.钻井和开采设备.井口设施和采油树设备 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment
ISO 10424-1-2004 石油和天然气工业.旋转钻孔设备.第1部分:旋转钻杆构件 Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements
ISO 10425-2003 石油和天然气工业用钢丝绳.最低要求和验收条件 Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
ISO 10426-1-2005 石油和天然气工业.油井固井用水泥和材料.第1部分:规范 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification
ISO 10426-2 AMD 1-2005 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥的试验.修改件1:亲水性试验 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements; Amendment 1: Water-wetting capability testing
ISO 10426-2 Technical Corrigendum 1-2006 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥测试 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements
ISO 10426-2-2003 石油和天然气工业.油井固井用水泥和材料.第2部分:油井用水泥的试验 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements
ISO 10426-3-2003 石油和天然气工业.油井固井用水泥和材料.第3部分:深水油井水泥成分的测试 Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations
ISO 10426-4-2004 石油和天然气工业.油井固井用水泥和材料.第4部分:在大气压力下泡沫水泥浆的制备和检验 Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure
ISO 10426-5-2004 石油和天然气工业.油井固井用水泥和材料.第5部分:在大气压力下固井水泥加工制剂的收缩和膨胀的测定 Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
ISO 10427-1-2001 石油和天然气工业 套管扶正器 第1部分:弓性弹簧套管扶正器 Petroleum and natural gas industries - Casing centralizers - Part 1: Bow-spring casing centralizers
ISO 10427-2-2004 石油和天然气工业.固井用设备.第2部分:扶正器的放置和限动环的检测 Petroleum and natural gas industries - Equipment for well cementing - Part 2: Centralizer placement and stop-collar testing
ISO 10427-3-2003 石油和天然气工业.固井用设备.第3部分:固井浮动设备的性能试验 Petroleum and natural gas industries - Equipment for well cementing - Part 3: Performance testing of cementing float equipment
ISO 10428-1993 石油和天然气工业 抽油杆(抽油杆短节 光杆 接箍和变径接箍) 规范 Petroleum and natural gas industries; sucker rods (pony-rods, polished rods, couplings and sub-couplings); specification
ISO 10431-1993 石油和天然气工业 抽油机 规范 Petroleum and natural gas industries; pumping units; specification
ISO 10432-2004 石油和天然气工业.下降孔设备.地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
ISO 10434-2004 石油、石油化学和相关工业用栓接帽状钢闸阀 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
ISO 10437-2003 石油、石油化学和天然气工业.专用汽轮机设备 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications
ISO 10438-1-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements
ISO 10438-2-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems
ISO 10438-3-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems
ISO 10438-4-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems
ISO 10439-2002 石油、化学和气体工业.离心压缩机 Petroleum, chemical and gas service industries - Centrifugal compressors
ISO 10440-1-2007 石油、石化和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors
ISO 10440-2-2001 石油和天然气工业 旋转型容积式压缩机 第2部分:封装的空气压缩机(无油) Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free)
ISO 10441-2007 石油、石化和天然气工业.机械动力传输用挠性联轴节.特殊应用 Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications
ISO 10442-2002 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors
ISO 10464-2004 气瓶.液化石油气(LPG)用可再填充的焊接钢制气瓶.周期检验和试验 Gas cylinders - Refillable welded steel cylinders for liquefied petroleum gas (LPG) - Periodic inspection and testing
ISO 10478-1994 石油产品 中间燃份油中的铝和硅的测定 感应耦合等离子发射和原子吸收光谱法 Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods
ISO 10691-2004 气瓶.液化石油气(LPG)用可再填充的焊接钢制气瓶.装填前后及装填期间的检验规程 Gas cylinders - Refillable welded steel cylinders for liquified petroleum gas (LPG) - Procedures for checking before, during and after filling
ISO 11007-1997 石油产品和润滑剂 润滑脂防锈性能的测定 Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases
ISO 11009-2000 石油产品和润滑剂 润滑脂抗水淋特性的测定 Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases
ISO 11223-2004 石油和液态石油产品.直接静态测量.通过静压油罐计量测量立式贮罐容量 Petroleum and liquid petroleum products - Direct static measurements - Measurement of content of vertical storage tanks by hydrostatic tank gauging
ISO 11563-2003 原油和石油制品.散货运输.实现管道满度的指南 Crude petroleum and petroleum products - Bulk cargo transfer - Guidelines for achieving the fullness of pipelines
ISO 11759-1999 输送液化石油气用橡胶软管和软管组件(LPGs) 规范 Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) - Specification
ISO 11960 Technical Corrigendum 1-2006 石油和天然气工业.油井套管或油管用钢管.技术勘误1 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1
ISO 11960-2004 石油和天然气工业.油井套管和油管用钢管 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
ISO 11961-1996 石油和天然气工业 钻井杆用钢管 规范 Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
ISO 12185 Technical Corrigendum 1-2001 原油和石油产品 密度的测定 振动的U形管法 技术勘误1 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method; Technical Corrigendum 1
ISO 12185-1996 原油和石油产品 密度的测定 振动的U形管法 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method
ISO 12205-1995 石油产品 中间馏份燃料的氧化安定性的测定 Petroleum products - Determination of the oxidation stability of middle-distillate fuels
ISO 12917-1-2002 石油和液化石油产品.卧式圆形油罐的校正.第1部分:手工法 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manuel methods
ISO 12917-2-2002 石油和液态石油产品.卧式圆筒状油罐的标定.第2部分:光电内测距法 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 2: Internal electro-optical distance-ranging method
ISO 12937-2000 石油产品 水分的测定 库仑卡尔·费休滴定法 Petroleum products - Determination of water - Coulometric Karl Fischer titration method
ISO 13357-1-2002 石油产品.润滑油可过滤性测定.第2部分:水中过滤油的程序 Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water
ISO 13357-2-2005 石油产品.润滑油的可过滤性测定.第2部分:干性油技术 Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils
ISO 13500-2006 石油和天然气工业.钻井液体材料.规范和测试 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests
ISO 13501-2005 石油和天然气工业.钻井液.加工系统评价 Petroleum and natural gas industries - Drilling fluids - Processing systems evaluation
ISO 13503-1 Technical Corrigendum 1-2005 石油和天然气工业.完井液和材料.第1部分:完井液粘性测量.技术勘误1 Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids; Technical Corrigendum 1
ISO 13503-1-2003 石油和天然气工业.完井液和材料.第1部分:完井液粘着特性的测量 Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids
ISO 13503-2-2006 石油和天然气工业.完井液和材料.第2部分:高压水砂破裂法和砾石包装作业用支撑剂性能测定 Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
ISO 13503-3 Technical Corrigendum 1-2006 石油和天然气工业.完井液和材料.第3部分:重盐水的试验.技术勘误1 Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines; Technical Corrigendum 1
ISO 13503-3-2005 石油和天然气工业.完井液和材料.第3部分:重盐水的试验 Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines
ISO 13503-4-2006 石油和天然气工业.完井液和材料.第4部分:在静态条件下测量外部碰击和砂砾包装液体泄露程序 Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
ISO 13503-5-2006 石油和天然气工业.完井液和材料.第5部分:测量重盐水长期电导率程序.技术勘误1 Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants
ISO 13533 Technical Corrigendum 1-2005 石油和天然气工业.钻井和生产设备.钻通设备.技术勘误1 Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment; Technical Corrigendum 1
ISO 13533-2001 石油和天然气工业 钻井和生产设备 钻井设备 Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
ISO 13534-2000 石油和天然气工业 钻井和生产设备 提升设备的检查、维护、修理和再制造 Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment
ISO 13535-2000 石油和天然气工业 钻井和生产设备 提升设备 Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment
ISO 13623-2000 石油和天然气工业.管道输送系统 Petroleum and natural gas industries - Pipeline transportation systems
ISO 13625-2002 石油和天然气工业.钻井和生产设备.海洋钻井隔水导管联接器 Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings
ISO 13626-2003 石油和天然气工业.钻井和生产设备.钻井和井检修结构 Petroleum and natural gas industries - Drilling and production equipment - Drilling and well-servicing structures
ISO 13628-1-2005 石油和天然器工业.水下采油系统的设计和操作.第1部分:一般要求和建议 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations
ISO 13628-10-2005 石油和天然气工业.水下采油系统的设计和操作.第10部分:连接柔性管规范 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
ISO 13628-11-2007 石油和天然气工业.水底生产系统的设计和运行.第11部分:海底和海上设备用软管系统 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications
ISO 13628-2-2006 石油和天然气工业.水下采油系统的设计和操作.第2部分:海底和海洋设备用游离软管系统 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-3-2000 石油和天然气工业 水下采油系统的设计和操作 第3部分:通流线系统 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowtime (TFL) systems
ISO 13628-4-1999 石油和天然气工业 水下采油系统的设计和操作 第4部分:井口和采油树设备 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
ISO 13628-5-2002 石油和天然气工业.水下采油系统的设计和操作.第5部分:水下缆线和管道 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals
ISO 13628-6-2006 石油和天然气工业.水下采油系统的设计和操作.第6部分:水下生产控制系统 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems
ISO 13628-7-2005 石油和天然气工业.水下采油系统的设计和操作.第7部分:完井/修井提升管系统 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
ISO 13628-8 Technical Corrigendum 1-2005 石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口.技术勘误1 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems; Technical Corrigendum 1
ISO 13628-8-2002 石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
ISO 13628-9-2000 石油和天然气工业 水下采油系统的设计和操作 第9部分:遥控设备干预系统 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tools (ROT) intervention systems
ISO 13631-2002 石油和天然气工业.包装用往复式气体压缩机 Petroleum and natural gas industries - Packaged reciprocating gas compressors
ISO 13678 Technical Corrigendum 1-2005 石油和天然气工业.对套管、管道和管线用的螺纹油的评定和试验.技术勘误1 Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe; Technical Corrigendum 1
ISO 13678-2000 石油和天然气工业 对套管、管道和管线用的螺纹绝缘膏的评价和试验 Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
ISO 13679-2002 石油和天然气工业.套管和管连接的测试程序 Petroleum and natural gas industries - Procedures for testing casing and tubing connections
ISO 13680 Technical Corrigendum 2-2004 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件.技术勘误2 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
ISO 13680-2000 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
ISO 13691-2001 石油和天然气工业 特殊用途高速传动装置 Petroleum and natural gas industries - High-speed special-purpose gear units
ISO 13702-1999 石油和天然气工业 对海上开发安装中着火和爆炸的控制和减弱 要求和指南 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
ISO 13703 Technical Corrigendum 1-2002 石油和天然气工业.近海生产平台上管道系统的设计和安装.技术勘误1 Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms; Technical Corrigendum 1
ISO 13703-2000 石油和天然气工业 海上开采平台上管道系统的设计和安装 Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms
ISO 13705-2006 石油、石化和天然气工业.一般炼油厂火力加热器 Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service
ISO 13706-2005 石油、石化和天然气工业.风冷热交换器 Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
ISO 13707-2000 石油和天然气工业 往复式压缩机 Petroleum and natural gas industries - Reciprocating compressors
ISO 13709-2003 石油、石油化工和天然气工业用离心泵 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 13710-2004 石油、石油化学和天然气工业.往复式变容真空泵 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
ISO 13736-1997 石油产品和其他液体 闪点的测定 阿贝尔闭口杯法 Petroleum products and other liquids - Determination of flash point - Abel closed cup method
ISO 13737-2004 石油产品和润滑剂.润滑剂脂的低温针入度的测定 Petroleum products and lubricants - Determination of low-temperature cone penetration of lubricating greases
ISO 13740-1998 原油和石油产品 输入量的计算 在远洋运输中储油罐载负状态下容器组合的经验参数和减载下的容器组合经验参数 Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) on ocean-going tanker vessels
ISO 13757-1996 液化石油气 油残余物的测定 高温法 Liquefied petroleum gases - Determination of oily residues - High-temperature method
ISO 13758-1996 液化石油气 评价丙烷干燥度 阀冻结法 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
ISO 13759-1996 石油产品 柴油中硝酸烷基酯含量的测定 分光光度法 Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method
ISO 13775-2-2000 汽车用热塑管和软管 第2部分:石油类燃料上应用 Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications
ISO 13819-2-1995 石油和天然气工业 海上结构 第2部分:固定的钢结构 Petroleum and natural gas industries - Offshore structures - Part 2: Fixed steel structures
ISO 13847 Technical Corrigendum 1-2001 石油和天然气工业.管道输送系统.管道焊接.技术勘误1 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines; Technical Corrigendum 1
ISO 13847-2000 石油和天然气工业 管道输送系统 管道的焊接 Petroleum and natural gas industrie - Pipeline transportation systems - Welding of pipelines
ISO 13879-1999 石油和天然气工业 功能规范的内容和起草 Petroleum and natural gas industries - Content and drafting of a functional specification
ISO 13880-1999 石油和天然气工业 技术规范的内容和起草 Petroleum and natural gas industries - Content and drafting of a technical specification
ISO 14224-2006 石油、石化产品和天然气工业.设备可靠性和维修数据的采集与交换 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
ISO 14245-2006 气瓶.液化石油气瓶阀门的规范和试验.自闭合 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing
ISO 14310-2001 石油和天然气工业 下井设备 封隔器和桥塞 Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs
ISO 14313-1999 石油和天然气工业 管道输送系统 管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves
ISO 14435-2005 铝生产用含碳材料.石油焦.用感应耦合等离子体原子发射光谱测定法测定痕量金属 Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry
ISO 14596-2007 石油制品.硫含量的测定.波长色散X-射线荧光光谱法 Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry
ISO 14597-1997 石油产品 钒和镍含量的测定 波长色散X-射线荧光光谱法 Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry
ISO 14691-1999 石油和天然气工业 机械动力传输用挠性接箍 一般用途 Petroleum and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications
ISO 14692-1-2002 石油和天然气工业.玻璃纤维增强塑料管.第1部分:词汇、符号、应用和材料 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials
ISO 14692-2 Technical Corrigendum 1-2005 石油和天然气工业.玻璃增强塑料(GRP)管.第2部分:合格鉴定和制造.技术勘误1 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture; Technical Corrigendum 1
ISO 14692-2-2002 石油和天然气工业.玻璃纤维增强塑料管.第2部分:合格鉴定和制造 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
ISO 14692-3 Technical Corrigendum 1-2005 石油和天然气工业.玻璃增强塑料(GRP)管.第3部分:系统设计.技术勘误1 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design; Technical Corrigendum 1
ISO 14692-3-2002 石油和天然气工业.玻璃纤维增强塑料管.第3部分:系统管道 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System piping
ISO 14692-4 Technical Corrigendum 1-2006 石油和天然气工业.玻璃纤维增强塑料管.第4部分:制作、安装和操作;技术勘误1 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation; Technical Corrigendum 1
ISO 14692-4-2002 石油和天然气工业.玻璃纤维增强塑料管.第4部分:制作、安装和操作 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation
ISO 14693-2003 石油和天然气工业.钻井和油井辅助设备 Petroleum and natural gas industries - Drilling and well-servicing equipment
ISO 14723-2001 石油和天然气工业 管道输送系统 海底管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves
ISO 14935-1998 石油和相关产品 难燃液芯带燃烧持久度的测定 Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids
ISO 15029-1-1999 石油和相关产品 难燃液体喷射燃烧特性的测定 第1部分:喷流燃烧持久度 空锥喷嘴法 Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method
ISO 15136-1-2001 石油和天然气工业用下降孔设备 人工升降机用推进腔体泵系统 第1部分:泵 Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps
ISO 15136-2-2006 石油和天然气工业.人工升降机用推进腔体泵系统.第2部分:表面传动系统 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems
ISO 15138 Technical Corrigendum 1-2001 石油和天然气工业 海上开采装置 供暖 通风和空气调节 技术勘误1 Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning; Technical Corrigendum 1
ISO 15138-2000 石油和天然气工业 海上开采装置 供暖 通风和空气调节 Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
ISO 15156-1 Technical Corrigendum 1-2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化材料选择的一般原则.技术勘误 Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials; Technical Corrigendum 1
ISO 15156-1-2001 石油和天然气工业 石油制品和天然气生产中含硫化氢(H2S)环境下使用的材料 第1部分:耐破裂材料的一般选 Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials
ISO 15156-2 Technical Corrigendum 1-2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳钢和低合金钢及铸铁的使用. Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons; Technical Corrigendum 1
ISO 15156-2-2003 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons
ISO 15156-3 Technical Corrigendum 1-2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金. Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 1
ISO 15156-3 Technical Corrigendum 2-2005 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第1部分:耐裂化CRAs(防腐蚀合金)和其他合金. Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys; Technical Corrigendum 2
ISO 15156-3-2003 石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ISO 15167-1999 石油产品 中间馏份燃料颗粒物含量的测定 实验室过滤法 Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method
ISO 15169-2003 石油和液体石油产品.用混合油罐测量系统测定立式油罐所含烃类的体积、密度和质量 Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems
ISO 15463-2003 石油和天然气工业.新套管、管和平端钻管的现场检验 Petroleum and natural gas industries - Field inspection of new casing, tubing and plain-end drill pipe
ISO 15544-2000 石油和天然气工业 海上开采装置 紧急反应的要求和指南 Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response
ISO 15546-2007 石油和天然气工业.铝合金钻杆 Petroleum and natural gas industries - Aluminium alloy drill pipe
ISO 15547-1-2005 石油、石化和天然气工业.板式热交换器.第1部分:板框式热交换器 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 1: Plate-and-frame heat exchangers
ISO 15547-2-2005 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器 Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers
ISO 15589-1-2003 石油和天然气工业.管道运输系统的阴极保护.第1部分:陆地管线 Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 1: On-land pipelines
ISO 15589-2-2004 石油和天然气工业.管道运输系统的阴极保护.第2部分:海上管线 Petroleum and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines
ISO 15590-1-2001 石油和天然气工业 管道输送系统用诱导弯头、管件和法兰 第1部分:诱导弯头 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
ISO 15590-2-2003 石油和天然气工业.管道输送系统用进气弯管、管件和法兰.第2部分:管件 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings
ISO 15590-3-2004 石油和天然气工业.管道输送系统用进气弯头、管件和法兰.第3部分:法兰 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges
ISO 15597-2001 石油及有关产品 氯和溴含量的测定 波长散射X射线荧光光谱测定法 Petroleum and related products - Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry
ISO 15649-2001 石油和天然气工业 管道 Petroleum and natural gas industries - Piping
ISO 15663-1-2000 石油和天然气工业 寿命周期成本 第1部分:方法学 Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology
ISO 15663-2-2001 石油和天然气工业 寿命周期成本 第2部分:方法学应用指南和计算方法 Petroleum and natural gas industries - Life cycle costing - Part 2: Guidance on application of methodology and calculation methods
ISO 15663-3-2001 石油天然气工业.寿命周期费用分析.第3部分:实施指南 Petroleum and natural gas industries - Life-cycle costing - Part 3: Implementation guidelines
ISO 15761-2002 石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries
ISO 15911-2000 石油产品 用氢含量数据评定航空涡轮燃烧的净比能 Petroleum products - Estmation of net specific emergy of eviation turbine fuels using hydrogen content data
ISO 15995-2006 气瓶.液化石油气瓶阀门的规范和试验.手工操作 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
ISO 16070-2005 石油和天然气工业.下井设备.锁芯轴和落地接头 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples
ISO 16708-2006 石油和天然气工业.管道传输系统.基于可靠性的极限状态法 Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods
ISO 16812-2007 石油、石化和天然气工业.壳管式热交换器 Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
ISO 17078-1-2004 石油和天然气工业.钻井和生产设备.第1部分:偏心轴 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Side-pocket mandrels
ISO 17292-2004 石油、石化和相关工业用金属球阀 Metal ball valves for petroleum, petrochemical and allied industries
ISO 17776-2000 石油和天然气工业 海上开采装置 危险识别和风险评估用方法和技术指南 Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment
ISO 19900-2002 石油和天然气工业.近海结构的一般要求 Petroleum and natural gas industries - General requirements for offshore structures
ISO 19901-1-2005 石油和天然气工业.海上建筑物的特殊要求.第1部分:Metocean设计和运行研究 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1: Metocean design and operating considerations
ISO 19901-2-2004 石油和天然气工业.近海建筑物的特殊要求.第2部分:地震设计规程和标准 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 2: Seismic design procedures and criteria
ISO 19901-4-2003 石油和天然气工业.近海建筑物的特殊要求.第4部分:土工和基础设计考虑 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 4: Geotechnical and foundation design considerations
ISO 19901-5-2003 石油和天然气工业.海上建筑物的特殊要求.第5部分:设计和施工过程中的重量控制 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction
ISO 19901-7-2005 石油和天然气工业.海上建筑物的特殊要求.第7部分:浮动式海上建筑物和移动式海上设备用保持系统 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
ISO 19903-2006 石油和天然气工业.海上固定的混凝土建筑物 Petroleum and natural gas industries - Fixed concrete offshore structures
ISO 19904-1-2006 石油和天然气工业.漂浮离岸设施.第1部分:单体船、半潜水船和轻甲板船 Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars
ISO 1998-1 Technical Corrigendum 1-1999 石油工业 名词术语 第1部分:原料和产品 技术勘误1 两种语言版 Petroleum industry - Terminology - Part 1: Raw materials and products; Technical Corrigendum 1
ISO 1998-1-1998 石油工业 名词术语 第1部分:原料和产品 两种语言版 Petroleum industry - Terminology - Part 1: Raw materials and products
ISO 1998-2-1998 石油工业 名词术语 第2部分:性质和试验 两种语言版 Petroleum industry - Terminology - Part 2: Properties and tests
ISO 1998-3-1998 石油工业 名词术语 第3部分:勘探和采油 两种语言版 Petroleum industry - Terminology - Part 3: Exploration and production
ISO 1998-4-1998 石油工业 名词术语 第4部分:炼制 两种语言版 Petroleum industry - Terminology - Part 4: Refining
ISO 1998-5 Technical Corrigendum 1-1999 石油工业 名词术语 第5部分:运输、储存、分配 技术勘误1 两种语言版 Petroleum industry - Terminology - Part 5: Transport, storage, distribution; Technical Corrigendum 1
ISO 1998-5-1998 石油工业 名词术语 第5部分:运输、储存、分配 两种语言版 Petroleum industry - Terminology - Part 5: Transport, storage, distribution
ISO 1998-6-2000 石油工业 名词术语 第6部分:计量 两种语言版 Petroleum industry - Terminology - Part 6: Measurement
ISO 1998-7-1998 石油工业 名词术语 第7部分:其他术语 两种语言版 Petroleum industry - Terminology - Part 7: Miscellaneous terms
ISO 1998-99-2000 石油工业 名词术语 第99部分:总则和索引 两种语言版 Petroleum industry - Terminolgy - Part 99: General and index
ISO 20203-2005 铝生产中使用的碳素材料.煅烧焦炭.用X-射线衍射法测定煅烧石油焦的晶体粒度 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction
ISO 2049-1996 石油产品 色度的测定(ASTM等级) Petroleum products - Determination of colour (ASTM scale)
ISO 20623-2003 石油及相关产品.用4球法测定流体的极限压力和耐磨性(欧洲条件) Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions)
ISO 20763-2004 石油和相关产品.液压液耐磨性的测定.叶轮泵法 Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
ISO 20764-2003 石油和相关产品.水量测定用高沸点流体试验区的准备.氮净化法 Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method
ISO 20783-1-2003 石油及相关产品.测定抗火液体的乳剂稳定性.第1部分:HFAE类液体 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE
ISO 20783-2-2003 石油及相关产品.测定抗火液体的乳剂稳定性.第2部分:HFB类液体 Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB
ISO 20823-2003 石油及相关产品.与热表面接触时液体易燃性的测定.歧管点火试验 Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test
ISO 20826-2006 车载液化石油汽装置部件.容器 Automotive LPG components - Containers
ISO 20843-2003 石油和相关产品.HFAE、HFAS和HFC类别中抗燃液压油pH值的测定 Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
ISO 20844-2004 石油和相关产品.用柴油喷射器喷嘴测定含高聚物油的剪切稳定性 Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
ISO 20846-2004 石油制品.机动车燃料的硫含量的测定.紫外线荧光法 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method
ISO 20847-2004 石油制品.机动车燃料的硫含量的测定.能量分散X射线荧光光谱法 Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry
ISO 20884-2004 石油制品.机动车燃料的硫含量的测定.波长色散X射线荧光光谱法 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry
ISO 21329-2004 石油和天然气工业.管道运输系统.机械连接器的试验过程 Petroleum and natural gas industries - Pipeline transportation systems - Test procedures for mechanical connectors
ISO 2137-1985 石油产品 润滑脂和石油脂 锥入度的测定 Petroleum products; Lubricating grease and petrolatum; Determination of cone penetration
ISO 2160-1998 石油产品 对铜的腐蚀性 铜片腐蚀试验 Petroleum products - Corrosiveness to copper - Copper strip test
ISO 2176 Technical Corrigendum 1-2001 石油产品 润滑脂 滴点的测定 技术勘误1 Petroleum products - Lubricating grease - Determination of dropping point; Technical Corrigendum 1
ISO 2176-1995 石油产品 润滑脂 滴点的测定 Petroleum products - Lubricating grease - Determination of dropping point
ISO 22991-2004 储气瓶.液化石油气用可运输的可再填充焊接钢瓶.设计和建造 Gas cylinders - Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG) - Design and construction
ISO 23251 Technical Corrigendum 1-2007 石油、石化和天然气工业.压力释放和降压系统.技术勘误1 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems; Technical Corrigendum 1
ISO 23251-2006 石油、石化和天然气工业.压力.缓解和减少系统 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems
ISO 2909-2002 石油产品.用运动粘度计算粘度指数 Petroleum products - Calculation of viscosity index from kinematic viscosity
ISO 2928-2003 25巴(2.5MPa)及以下的天然气和液相或气相液化石油气用橡胶软管和软管组件.规范 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) - Specification
ISO 2977-1997 石油产品和烃类溶剂 苯胺点和混合苯胺点的测定 Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point
ISO 3007-1999 石油产品和原油 蒸气压的测定 雷德法 Petroleum products and crude petroleum - Determination of vapour pressure - Reid method
ISO 3012-1999 石油产品 轻质和中间馏份燃料硫醇硫的测定 电位滴定法 Petroleum products - Determination of thiol (mercaptan) sulfur in light and middle distillate fuels - Potentiometric method
ISO 3013-1997 石油产品 航空燃料冰点的测定 Petroleum products - Determination of the freezing point of aviation fuels
ISO 3014-1993 石油产品 航空燃料冰点的测定 Petroleum products; determination of the smoke point of kerosine
ISO 3015-1992 石油产品 浊点的测定 Petroleum products; determination of cloud point
ISO 3016-1994 石油.倾点的测定 Petroleum products - Determination of pour point
ISO 3104 Technical Corrigendum 1-1997 石油产品 透明和不透明石油液体 运动粘度的测定和动力粘度的计算 技术勘误1 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity; Technical corrigendum 1
ISO 3104-1994 石油产品 透明和不透明石油液体 运动粘度的测定和动力粘度的计算 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 3170-2004 石油液体.人工采样 Petroleum liquids - Manual sampling
ISO 3171-1988 石油液体 自动管线采样 Petroleum liquids; automatic pipeline sampling
ISO 3183-2007 石油和天然气工业.管道运输系统用钢管 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
ISO 3183-3 Technical Corrigendum 1-2000 石油和天然气工业.管道钢管.交货技术条件.第3部分:C级钢管的要求.技术勘误1 Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1
ISO 3405-2000 石油产品 常压下馏份特性的测定 Petroleum products - Determination of distillation characteristics at atmospheric pressure
ISO 3675-1998 原油和液体石油产品 密度实验室测定 密度计法 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method
ISO 3733-1999 石油产品和沥青材料 水分的测定 蒸馏法 Petroleum products and bituminous materials - Determination of water - Distillation method
ISO 3734-1997 石油产品 燃料油中水和沉积物的测定 离心法 Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method
ISO 3771-1994 石油产品 总碱值的测定 高氯酸电位滴定法 Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
ISO 3830-1993 石油产品 汽油中铅含量的测定 一氯化碘法 Petroleum products; determination of lead content of gasoline; iodine monochloride method
ISO 3837 Technical Corrigendum 1-1994 液体石油产品 烃类的测定 荧光指示剂吸附法 技术勘误1 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent indicator adsorption method; Technical Corrigendum 1
ISO 3837 Technical Corrigendum 2-1996 液体石油产品 烃类的测定 萤光指示剂吸附法 技术勘误2 Liquid petroleum products - Determination of hydrocarbon types - Fluorescent indicator adsorption method; Technical Corrigendum 2
ISO 3837-1993 液体石油产品 烃类的测定 荧光指示剂吸附法 Liquid petroleum products; determination of hydrocarbon types; fluorescent indicator adsorption method
ISO 3838-2004 原油和液体或固体石油产品.密度或相对密度的测定.毛细管塞比重瓶和带刻度双毛细管比重瓶法 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
ISO 3839-1996 石油产品 馏份和脂肪族烯烃溴值的测定 电位滴定法 Petroleum products - Determination of bromine number of distillates and aliphatic olefins - Electrometric method
ISO 3871-2000 道路车辆 石油基或非石油基制动液容器的标记 Road vehicles - Labelling of containers for petroleum or non-petroleum base brake fluid
ISO 3924-1999 石油产品 馏程的测定 气相色谱法 Petroleum products - Determination of boiling range distribution - Gas chromatography method
ISO 3962-1977 石油和天然气工业用材料和设备.油井或天然气井用钢钻杆的钻具接头 Materials and equipment for petroleum and natural gas industries; Tool joints for steel drill pipe for oil or natural gas wells
ISO 3977-5-2001 燃气轮机 采购 第5部分:在石油和天然气工业中的应用 Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
ISO 3987-1994 石油产品 润滑油和添加剂 硫酸盐灰分的测定 Petroleum products - Lubricating oils and additives - Determination of sulfated ash
ISO 3993-1984 液化石油气和轻质烃类 密度或相对密度的测定 压力比重计法 Liquefied petroleum gas and light hydrocarbons; Determination of density or relative density; Pressure hydrometer method
ISO 3996-1995 道路车辆 使用非石油基制动液的液压制动系统软管组件 Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
ISO 4256-1996 液化石油气 蒸气压的测定 LPG法 Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method
ISO 4257 Technical Corrigendum 1-2007 液化石油气.取样方法.技术勘误1 Liquefied petroleum gases - Method of sampling; Technical Corrigendum 1
ISO 4257-2001 液化石油气 采样方法 Liquefied petroleum gases - Method of sampling
ISO 4259-2006 石油产品.与试验方法相关的精度数据的确定和应用 Petroleum products - Determination and application of precision data in relation to methods of test
ISO 4260-1987 石油产品和烃类 硫含量的测定 威克波耳德(Wickbold)燃烧法 Petroleum products and hydrocarbons; Determination of sulfur content; Wickbold combustion method
ISO 4261-1993 石油产品 燃料(F类) 船和工业用燃气轮机燃料的规格 Petroleum products; fuels (class F); specifications of gas turbine fuels for industrial and marine applications
ISO 4262-1993 石油产品 残碳的测定 兰姆斯波特姆(Ramsbottom)法(简称“兰氏法”) Petroleum products; determination of carbon residue; Ramsbottom method
ISO 4263-1-2003 石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第1部分:矿物油测定规程 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 1: Procedure for mineral oils
ISO 4263-2-2003 石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:HFC类液压液测定规程 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids
ISO 4263-3-2006 石油及相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第2部分:合成液压液的无水程序 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids
ISO 4263-4-2006 石油及相关产品.防腐蚀矿物油和液体的老化性能测定.TOST试验.第4部分:工业齿轮油的程序 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils
ISO 4264-2007 石油产品.四变量公式法计算中间馏分燃料的十六烷指数 Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation
ISO 4266-1-2002 石油和液态石油产品.用自动法测定储罐中温度和液面.第1部分:气罐的液面测量 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 1: Measurement of level in atmospheric tanks
ISO 4266-2-2002 石油和液态石油产品.用自动法测定储罐中温度和液面.第2部分:船用容器的液面测量 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 2: Measurement of level in marine vessels
ISO 4266-3-2002 石油和液态石油产品.用自动法测定储罐中温度和液面.第3部分:加压储罐的液面测量(非冷却的) Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
ISO 4266-4-2002 石油和液态石油产品.用自动法测定储罐中温度和液面.第4部分:气罐温度的测量 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 4: Measurement of temperature in atmospheric tanks
ISO 4266-5-2002 石油和液态石油产品.用自动法测定储罐中温度和液面.第5部分:船用容器温度的测量 Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 5: Measurement of temperature in marine vessels
ISO 4266-6-2002 石油和液态石油产品.用自动法测定储罐中温度和液面.第6部分:加压储罐温度的测量(非冷却的) Petroleum and liquid petroleum products - Measurement of level and temperature in storage tanks by automatic methods - Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated)
ISO 4267-2-1988 石油和液态石油产品 油量的估算 第2部分:动态计量 Petroleum and liquid petroleum products; calculation of oil quantities; part 2: dynamic measurement
ISO 4268-2000 石油和液态石油产品 温度计量 手工法 Petroleum and liquid petroleum products - Temperature measurements - Manual methods
ISO 4269-2001 石油和液态石油产品 采用液态测量的油罐标定 采用容量计的增量法 Petroleum and liquid petroleum products - Tank calibration by liquid measurement - Incremental method using volumetric meters
ISO 4404-1-2001 石油及有关产品 耐火液压油液的抗腐蚀性的测定 第1部分:含水油液 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids
ISO 4404-2-2003 石油和相关产品.难燃液压液抗腐蚀性的测定.第2部分:不含水油液 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids
ISO 4512-2000 石油和液态石油产品 储油罐中液位的测量设备 人工法 Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods
ISO 4925-2005 道路车辆.液压系统用非石油基制动液的规范 Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems
ISO 4926-2006 道路车辆.液压制动系统.非石油基基准液 Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids
ISO 4927-2005 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃) Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
ISO 4928-2006 道路车辆.使用非石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封圈(最高工作温度120℃) Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
ISO 4929-1978 道路车辆 使用非石油基液压制动液的液压制动主液压缸储油器的膜片密封垫 Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
ISO 4930-2006 道路车辆.使用非石油基液压制动液的液压制动盘式液压缸的弹性密封垫(最高工作温度150℃) Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.)
ISO 5024-1999 石油液体和液化石油气 计量 标准参考条件 Petroleum liquids and liquefied petroleum gases - Measurement - Standard reference conditions
ISO 5163-2005 石油产品.发动机和航空燃料爆震特性的测定.马达法 Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method
ISO 5164-2005 石油产品.发动机燃料爆震特性的测定.研究法 Petroleum products - Determination of knock characteristics of motor fuels - Research method
ISO 5165-1998 石油产品 柴油着火性能的测定 十六烷值法 Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method
ISO 5226-1985 石油和天然气工业用材料和设备.油井或天然气井用铝合金钻管 Materials and equipment for petroleum and natural gas industries; Aluminium alloy drill pipe for oil or natural gas wells
ISO 5275-2003 石油产品和烃类溶剂.硫醇类和其他硫类的测定.(博士法试验-定硫醇) Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test
ISO 5661-1983 石油产品 液态烃类 折光指数的测定 Petroleum products; Hydrocarbon liquids; Determination of refractive index
ISO 6117-2005 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度100℃) Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.)
ISO 6118-2006 道路车辆.使用非石油基制动液的液压制动促动缸的弹性皮碗和密封圈(最高工作温度70℃) Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
ISO 6119-2006 道路车辆.使用非石油基液压制动液的液压盘式制动液压缸的弹性密封垫(最高工作温度120℃) Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
ISO 6120-1995 道路车辆.使用石油基液压液的液压制动系统制动软管总成 Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
ISO 6244-1982 石蜡和石油脂 滴熔点的测定 Petroleum waxes and petrolatums; Determination of drop melting point
ISO 6245-2001 石油制品 灰分测定 Petroleum products - Determination of ash
ISO 6246 Technical Corrigendum 1-1998 石油产品 轻质和中间馏份燃料的胶含量 喷射蒸发法 技术勘误1 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method; Technical Corrigendum 1
ISO 6246-1995 石油产品 轻质和中间馏份燃料的胶含量 喷射蒸发法 Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method
ISO 6247 Technical Corrigendum 1-1999 石油产品 润滑油发泡特性的测定 技术勘误1 Petroleum products - Determination of foaming characteristics of lubricating oils; Technical Corrigendum 1
ISO 6247-1998 石油产品 润滑油发泡特性的测定 Petroleum products - Determination of foaming characteristics of lubricating oils
ISO 6249-1999 石油产品 燃气轮机燃料热氧化安定性的测定 JFTOT法 Petroleum products - Determination of thermal oxidation stability of gas turbine fuels - JFTOT method
ISO 6250-1997 石油产品 航空燃料水反应的测定 Petroleum products - Determination of the water reaction of aviation fuels
ISO 6251-1996 液化石油气 对铜的腐蚀性 铜片试验 Liquefied petroleum gases - Corrosiveness to copper - Copper strip test
ISO 6293-1-1996 石油产品 皂化值的测定 第1部分:颜色指示滴定法 Petroleum products - Determination of saponification number - Part 1: Colour indicator titration method
ISO 6293-2-1998 石油产品 皂化值的测定 第2部分:电位滴定法 Petroleum products - Determination of saponification number - Part 2: Potentiometric titration method
ISO 6296-2000 石油产品 水的测定 电位测量卡尔·费休滴定法 Petroleum products - Determination of water - Potentiometric Karl Fischer titration method
ISO 6297-1997 石油产品 航空和馏份燃料 电导率的测定 Petroleum products - Aviation and distillate fuels - Determination of electrical conductivity
ISO 6299-1998 石油产品 润滑脂滴点(宽温度范围)的测定 Petroleum products - Determination of dropping point of lubricating greases (wide temperature range)
ISO 6448-1985 橡胶密封件 输送石油产品管道和配件用密封圈 材料规范 Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material
ISO 6551-1982 石油液体和气体 动态测量的精度和可靠性 电脉冲数据和/或电子脉冲数据的电缆传输 Petroleum liquids and gases; Fidelity and security of dynamic measurement; Cabled transmission of electric and/or electronic pulsed data
ISO 6614-1994 石油产品 矿物油和合成液水分离的测定 Petroleum products - Determination of water separability of petroleum oils and synthetic fluids
ISO 6615-1993 石油产品 残碳的测定 康氏法 Petroleum products; determination of carbon residue; Conradson method
ISO 6617-1994 石油基润滑油 老化特性 氧化后残碳变化的测定 Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation
ISO 6618 Technical Corrigendum 1-1999 石油产品和润滑剂.酸和中和碱值的测定.颜色指示剂滴定法.技术勘误1 Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method; Technical Corrigendum 1
ISO 6618-1997 石油产品和润滑剂 酸和中和碱值的测定 颜色指示剂滴定法 Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method
ISO 6619-1988 石油产品和润滑剂 中和值 电位滴定法 Petroleum products and lubricants; neutralization number; potentiometric titration method
ISO 7120-1987 石油产品和润滑剂 石油原油和其他液体 水存在时防锈性能的测定 Petroleum products and lubricants; Petroleum oils and other fluids; Determination of rust-preventing characteristics in the presence of water
ISO 7308-1987 道路车辆 储能液压制动用的石油基制动液 Road vehicles; Petroleum-based brake-fluid for stored-energy hydraulic brakes
ISO 7309-1985 道路车辆 液压制动系统 ISO标准石油基液 Road vehicles; Hydraulic braking systems; ISO reference petroleum base fluid
ISO 734-1-2006 油料种子残渣.测定油含量.第1部分:已烷萃取法(轻质石油) Oilseed meals - Determination of oil content - Part 1: Extraction method with hexane (or light petroleum)
ISO 7507-1-2003 石油和液态石油产品.直立式圆筒状油罐的标定.第1部分:围测法 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 1: Strapping method
ISO 7507-2-2005 石油和液态石油产品.直立式圆筒状油罐的标定.第2部分:光学参比线法 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 2: Optical-reference-line method
ISO 7507-3-2006 石油和液态石油产品.直立式圆筒状油罐的标定.第3部分:光学三角测量法 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 3: Optical-triangulation method
ISO 7507-4-1995 石油和液态石油产品 直立式圆筒状油罐的标定 第4部分:内光电测距法 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 4: Internal electro-optical distance-ranging method
ISO 7507-5-2000 石油和液态石油产品 直立式圆筒状油罐的标定 第5部分:光电外测距法 Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 5: External electro-optical distance-ranging method
ISO 7536-1994 石油产品 汽油氧化安定性的测定 诱导期法 Petroleum products - Determination of oxidation stability of gasoline - Induction period method
ISO 7537-1997 石油产品 总酸值的测定 半微量颜色指示剂滴定法 Petroleum products - Determination of acid number - Semi-micro colour-indicator titration method
ISO 7624-1997 石油产品和润滑剂 加抑制剂矿物汽轮机油 氧化稳定性的测定 Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability
ISO 7630-1985 道路车辆 使用石油基液压制动液的鼓式制动轮缸的弹性O形密封圈(最高工作温度120℃) Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
ISO 7631-1985 道路车辆 使用石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封垫圈(最高工作温度120℃) Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
ISO 7632-1985 道路车辆 使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫圈(最高工作温度120℃) Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
ISO 7633-1985 道路车辆 使用石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃) Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
ISO 8216-1-2005 石油产品.燃料(F类)分类.第1部分:船用燃料类别 Petroleum products - Fuels (class F) classification - Part 1: Categories of marine fuels
ISO 8216-2-1986 石油产品 燃料(F类) 分类 第2部分:工业和船用燃气轮机燃料的种类 Petroleum products; Fuels (class F); Classification; Part 2 : Categories of gas turbine fuels for industrial and marine applications
ISO 8216-3-1987 石油产品 燃料(F类) 分类 第3部分:L组(液化石油气) Petroleum products; Fuels (class F); Classification; Part 3 : Family L (Liquefied petroleum gases)
ISO 8216-99-2002 石油产品.燃料(F类).分类.第99部分:总则 Petroleum products - Fuels (class F); Classification - Part 99: General
ISO 8217-2005 石油产品.燃料(F类).船用燃料规范 Petroleum products - Fuels (class F) - Specifications of marine fuels
ISO 8222-2002 石油测量系统.校准.容积验证箱校正时的温度修正 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
ISO 8681-1986 石油产品和润滑剂 分类法 等级的定义 Petroleum products and lubricants; Method of classification; Definition of classes
ISO 8691-1994 石油产品 液体燃料中的微量钒 用灰化后火焰原子吸收光谱法测定 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing
ISO 8697-1999 原油和石油产品 运输量估算 船上质量(OBQ)和船上剩余量(ROB)的评估 Crude petroleum and petroleum products - Transfer accountability - Assessment of on board quantity (OBQ) and quantity remaining on board (ROB)
ISO 8754-2003 石油产品.硫含量的测定.能量分散X射线荧光光谱测定法 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry
ISO 8789-1994 摩托车输送液化石油气用橡胶软管和软管组件 规范 Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification
ISO 8819-1993 液化石油气 硫化氢的测定 乙酸铅法 Liquefied petroleum gases; detection of hydrogen sulfide; lead acetate method
ISO 8973-1997 液化石油气 密度和蒸气压的计算 Liquefied petroleum gases - Calculation for density and vapour pressure
ISO 91-1-1992 石油计量表.第1部分:以15鳦和60鳩为参比温度基础的表 Petroleum measurement tables; part 1: tables based on reference temperatures of 15 °C and 60 °F
ISO 91-2-1991 石油计量表.第2部分:以20℃为参比温度基础的表 Petroleum measurement tables; part 2: tables based on a reference temperature of 20 °C
ISO 9120-1997 石油及相关产品.汽轮机油和其他油的空气释放性能的测定.冲击滤尘器法 Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method
ISO 9162-1989 石油产品 燃料(F类) 液化石油气 规格 Petroleum products; fuels (class F); liquefied petroleum gases; specifications
ISO 9200-1993 原油和液态石油产品 粘质烃类容量计量 Crude petroleum and liquid petroleum products; volumetric metering of viscous hydrocarbons
ISO 9770-1989 石油和石油产品 碳氢化合物在638kg/m-1074kg/m的压缩因数 Crude petroleum and petroleum products; compressibility factors for hydrocarbons in the range 638 kg/m<(hoch)3> to 1074 kg/m<(hoch)3>
ISO/TR 13739-1998 石油产品 制定向船用燃料舱输送燃料的实用程序的方法 Petroleum products - Methods for specifying practical procedures for the transfer of bunker fuels to ships
ISO/TR 13881-2000 石油和天然气工业 产品、加工和服务的分类和合格评定 Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services
ISO/TS 15926-4-2007 工业自动化系统和集成.包括石油和天然气生产设施的加工设备使用寿命数据的集成.第4部分:原始参考数据 Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - Part 4: Initial reference data
ISO/TS 24817-2006 石油、石化和天然气工业.管件用复合材料检修. 资格鉴定和设计、安装、试验和检验 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection
ISO/TS 29001-2003 石油、化工和天然气工业.部门专用质量管理系统.产品和服务机构的要求 Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations
编号中文名称英文名称

返回