5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




ISO验收标准(ISO acceptance standards)翻译目录查询

ASME |  BS |  DIN |  EN |  GB |  IEC |  IEEE |  ISO |  JIS |  NF | 
编号中文名称英文名称
ISO 10099-2001 气压传动 缸筒 最终检验和验收准则 Pneumatic fluid power - Cylinders - Final examination and acceptance criteria
ISO 10100-2001 液压传动 缸筒 验收试验 Hydraulic fluid power - Cylinders - Acceptance tests
ISO 10360-1 Technical Corrigendum 1-2002 产品几何量技术规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第1部分:词汇.技术勘误1 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary; Technical Corrigendum 1
ISO 10360-1-2000 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第1部分:词汇 两种语言版 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary
ISO 10360-2-2001 产品几何量技术规范(GPS) 坐标测量机(CMMs)的验收和复检 第2部分:用于测量尺寸的CMM Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size
ISO 10360-3-2000 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第3部分:旋转台的轴线作为第四轴线的坐标测量机 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis
ISO 10360-4 Technical Corrigendum 1-2002 产品几何量技术规范(GPS).坐标测量机(CMM)的验收和复检试验.第4部分:用于扫描型坐标机.技术勘误1 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode; Technical Corrigendum 1
ISO 10360-4-2000 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第4部分:用于扫描型坐标机 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
ISO 10360-5-2000 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第5部分:使用多触针探测系统的坐标测量机 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems
ISO 10360-6-2001 产品几何量技术规范(GPS) 坐标测量机(CMMs)的验收和复检 第6部分:对计算高斯相关特性误差的估计 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
ISO 10425-2003 石油和天然气工业用钢丝绳.最低要求和验收条件 Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
ISO 10545-1-1995 陶瓷砖 第1部分:抽样和验收条件 Ceramic tiles - Part 1: Sampling and basis for acceptance
ISO 10725-2000 散料验收抽样检验程序和抽样方案 Acceptance sampling plans and procedures for the inspection of bulk materials
ISO 11474-1998 金属与合金的腐蚀 人工环境中的腐蚀试验 采用盐溶液间歇式喷射的加速户外验收试验(疤点试验) Corrosion of metals and alloys - Corrosion test in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
ISO 11970-2001 钢铸件制造焊接焊接工艺的规范和验收 Specification and approval of welding procedures for production welding of steel castings
ISO 1217-1996 容积式压缩机 验收试验 Displacement compressors - Acceptance tests
ISO 13448-1-2005 基于优先分配原则(APP)的验收取样规程.第1部分:APP法指南 Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach
ISO 13448-2-2004 基于优先分配原则的验收取样规程.第2部分:按属性验收取样用协调单个取样方案 Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes
ISO 14231-2000 热喷涂 热喷涂设备的验收检查 Thermal spraying - Acceptance inspection of thermal spraying equipment
ISO 14560-2004 按属性验收取样规程.每百万不合格产品中规定的质量等级 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO 14744-1-2000 焊接 电子束焊接机的验收检验 第1部分:原理和验收条件 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions
ISO 14744-2-2000 焊接 电子束焊接机的验收检验 第2部分:加速电压特性的测量 Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics
ISO 14744-3-2000 焊接 电子束焊接机的验收检验 第3部分:电子束电流特性的测量 Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics
ISO 14744-4-2000 焊接 电子束焊接机的验收检验 第4部分:焊接速度的测量 Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed
ISO 14744-5-2000 焊接 电子束焊接机的验收检验 第5部分:偏转精度的测量 Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy
ISO 14744-6-2000 焊接 电子束焊接机的验收检验 第6部分:焊点位置稳定性的测量 Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position
ISO 14982-1998 农林机械 电磁兼容性 试验方法和验收标准 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
ISO 15616-1-2003 高质量焊接和切割用CO2激光射线机的验收试验.第1部分:通用原理和验收条件 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions
ISO 15616-2-2003 高质量焊接和切割用CO2激光射线机的验收试验.第2部分:静态和动态准确度的测定 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
ISO 15616-3-2003 高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
ISO 16622-2002 气象学.声呐风速计/温度计.平均风速测量计的验收试验方法 Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements
ISO 1708-1989 卧式车床验收条件 精度检验 Acceptance conditions for general purpose parallel lathes; testing of the accuracy
ISO 17101-2004 农业机械.旋转和甩刀式割草机.投掷对象试验和验收标准 Agricultural machinery - Rotary and flail mowers - Thrown-object test and acceptance criteria
ISO 17103-2003 农用机械.旋转式和甩刀式割草机.防护围裙的试验方法和验收标准 Agricultural machinery - Rotary and flail mowers - Test methods and acceptance criteria for protective skirts
ISO 17613-1-2006 饮用水人工操作泵.选择和验收.第1部分:东南亚 Manually operated pumps for drinking water - Selection and acceptance - Part 1: Southeast Asia
ISO 1834-1999 起重用短环链 验收总则 Short link chain for lifting purposes - General conditions of acceptance
ISO 18414-2006 按属性验收取样规程.基于控制出厂质量信用原则的验收零取样系统 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
ISO 19840-2004 色漆和清漆.用防护漆系统对钢结构的腐蚀防护.粗面上干膜厚度的测量和验收标准 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
ISO 21247-2005 产品验收的组合接受零点抽样系统和过程控制规程 Combined accept-zero sampling systems and process control procedures for product acceptance
ISO 23079-2005 镁和镁合金.回炉料.要求、分类和验收 Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
ISO 2314 AMD 1-1997 燃气轮机 验收试验 修改1:联合循环动力设备的验收试验 Gas turbines - Acceptance tests; Amendment 1: Acceptance test for combined-cycle power plants
ISO 2314 Technical Corrigendum 1-1997 燃气轮机 验收试验 技术勘误1 Gas turbines - Acceptance tests; Technical Corrigendum 1
ISO 2314-1989 燃气轮机.验收试验 Gas turbines; acceptance tests
ISO 2423-1982 摇臂钻床验收条件 精度检验 Acceptance conditions for radial drilling machines with the arm adjustable in height; Testing of accuracy
ISO 2701-1977 一般用途非合金钢丝绳用拉拨钢丝 验收条件 Drawn wire for general purpose non-alloy steel wire ropes; Terms of acceptance
ISO 3189-1 Technical Corrigendum 1-2002 通用钢丝绳套.第1部分:一般特性和验收条件.技术勘误1 Sockets for wire ropes for general purposes - Part 1: General characteristics and conditions of acceptance; Technical Corrigensdum 1
ISO 3189-1-1985 普通钢丝绳用套管 第1部分:一般特性和验收条件 Sockets for wire ropes for general purposes; Part 1 : General characteristics and conditions of acceptance
ISO 3269-2000 紧固件 验收检查 Fasteners - Acceptance inspection
ISO 3408-3-2006 滚珠丝杠.第3部分:验收条件和验收检验 Ball screws - Part 3: Acceptance conditions and acceptance tests
ISO 3443-6-1986 建筑公差 第6部分:验收标准及根据尺度公差规定和统计控制进行验收的一般原则 方法1 Tolerances for building; Part 6 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control; Method 1
ISO 3443-7-1988 建筑公差 第7部分:验收标准及根据尺度公差规定和统计控制进行验收的一般原则 方法2(统计控制方法) Tolerances for building; part 7: general principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control; method 2 (statistical control method)
ISO 3463 AMD 1-1998 农林用轮式拖拉机 防护装置 动态试验方法和验收条件 修改1 Wheeled tractors for agriculture and forestry - Protective structures - Dynamic test method and acceptance conditions; Amendment 1
ISO 3463-1989 农林用轮式拖拉机 防护装置 动态试验方法和验收条件 Wheeled tractors for agriculture and forestry; protective structures; dynamic test method and acceptance conditions
ISO 3601-3-2005 流体动力系统.O型密封圈.第3部分:质量验收准则 Fluid power systems - O-rings - Part 3: Quality acceptance criteria
ISO 3655-1986 带固定式或移动式工作台的单柱或双柱立式车镗床验收条件 总论和精度检验 Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table; General introduction and testing of the accuracy
ISO 4094-2005 纸、纸板和纸浆.试验仪器的国际间校准.标准化和授权实验室的验收和任命 Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories
ISO 4463-1-1989 建筑物的测量方法 定线和测量 第1部分:计划和组织、测量程序、验收标准 Measurement methods for building; setting-out and measurement; part 1: planning and organization, measuring procedures, acceptance criteria
ISO 5022-1979 定型耐火制品 取样和验收试验 Shaped refractory products; Sampling and acceptance testing
ISO 5674-2004 农林用拖拉机和机械.动力输出轴护罩.强度和磨损试验及验收标准 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria
ISO 5700 AMD 1-1998 农林用轮式拖拉机 防护装置 静态试验方法和验收条件 修改1 Wheeled tractors for agriculture and forestry - Protective structures - Static test method and acceptance conditions; Amendment 1
ISO 5700-1989 农林用轮式拖拉机 防护装置 静态试验方法和验收条件 Wheeled tractors for agriculture and forestry; protective structures; static test method and acceptance conditions
ISO 5734-1986 机床用机械分度头验收条件 精度检验 Acceptance conditions of mechanical dividing heads for machine tools; Testing of accuracy
ISO 5948-1994 铁路车辆材料 超声波验收检验 Railway rolling stock material - Ultrasonic acceptance testing
ISO 6361-1-1986 加工铝和铝合金薄板、带、厚板 第1部分:交货和验收的技术条件 Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for inspection and delivery
ISO 6362-1-1986 加工铝和铝合金挤压棒/条材、管材和型材 第1部分:验收和交货的技术条件 Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical conditions for inspection and delivery
ISO 6363-1-1988 加工铝和铝合金冷拉棒/条材和管材 第1部分:验收及交货的技术条件 Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions for inspection and delivery
ISO 6365-1-1988 加工铝和铝合金冷拉线材 第1部分:验收及交货的技术条件 Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection and delivery
ISO 6480-1983 卧式内拉床验收条件 精度检验 Conditions of acceptance for horizontal internal broaching machines; Testing of the accuracy
ISO 6481-1981 立式外拉床验收条件 精度检验 Acceptance conditions for vertical surface type broaching machines; Testing of accuracy
ISO 6545-1992 滚齿机验收条件 精度检验 Acceptance conditions for gear hobbing machines; testing of the accuracy
ISO 6779-1981 立式内拉床验收条件 精度检验 Acceptance conditions for broaching machines of vertical internal type; Testing of accuracy
ISO 6899-1984 开式机械动力压力机验收条件 精度检验 Acceptance conditions of open front mechanical power presses; Testing of the accuracy
ISO 6933-1986 铁路车辆材料 磁粉验收检验 Railway rolling stock material; magnetic particle acceptance testing
ISO 7007-1983 木工机械 细木工带锯机 术语和验收条件 Woodworking machines; Table bandsawing machines; Nomenclature and acceptance conditions
ISO 7008-1983 木工机械 有或无移动平台的单片圆锯机 术语和验收条件 Woodworking machines; Single blade circular saw benches with or without travelling table; Nomenclature and acceptance conditions
ISO 7009-1983 木工机械 单轴铣机 术语和验收条件 Woodworking machines; Single spindle moulding machines; Nomenclature and acceptance conditions
ISO 7363-1986 起重机和起重机械 技术性能和验收文件 Cranes and lifting appliances; Technical characteristics and acceptance documents
ISO 7568-1986 木工机械 单面木工压刨床 术语和验收条件 Woodworking machines; Thickness planing machines with rotary cutterblock for one-side dressing; Nomenclature and acceptance conditions
ISO 7569-1986 木工机械 二、三、四面木工压刨床 术语和验收条件 Woodworking machines; Planing machines for two-, three- or four-side dressing; Nomenclature and acceptance conditions
ISO 7570-1986 木工机械 木工平压两用刨床 术语和验收条件 Woodworking machines; Surface planing and thicknessing machines; Nomenclature and acceptance conditions
ISO 7571-1986 木工机械 单面木工平刨床 术语和验收条件 Woodworking machines; Surface planing machines with cutterblock for one-side dressing; Nomenclature and acceptance conditions
ISO 7722-1985 重力铸造、砂型铸造、冷硬铸造或由有关工艺生产的铝合金铸件 验收和交货的一般条件 Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes; General conditions for inspection and delivery
ISO 7945-1985 木工机械 立式单轴钻床 术语和验收条件 Woodworking machines; Single spindle boring machines; Nomenclature and acceptance conditions
ISO 7946-1985 木工机械 榫槽机 术语和验收条件 Woodworking machines; Slot mortising machines; Nomenclature and acceptance conditions
ISO 7947-1985 木工机械 二、三、四面木工铣床 术语和验收条件 Woodworking machines; Two-, three- and four-side moulding machines; Nomenclature and acceptance conditions
ISO 7948-1987 木工机械 镂铣机 术语和验收条件 Woodworking machines; Routing machines; Nomenclature and acceptance conditions
ISO 7949-1985 木工机械 胶合板板叠切边机 术语和验收条件 Woodworking machines; Veneer pack edge shears; Nomenclature and acceptance conditions
ISO 7950-1985 木工机械 单链链式榫槽机 术语和验收条件 Woodworking machines; Single chain mortising machines; Nomenclature and acceptance conditions
ISO 7957-1987 木工机械 摇臂式木工圆锯机 术语和验收条件 Woodworking machines; Radial circular saws; Nomenclature and acceptance conditions
ISO 7958-1987 木工机械 单锯片往复木工锯板机 术语和验收条件 Woodworking machines; Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels; Nomenclature and acceptance conditions
ISO 7959-1987 木工机械 多锯片纵剖木工圆锯机 术语和验收条件 Woodworking machines; Double edging precision circular sawing machines; Nomenclature and acceptance conditions
ISO 7966-1993 验收控制图 Acceptance control charts
ISO 7983-1988 木工机械 带移动工作台木工圆锯机 术语及验收条件 Woodworking machines; single blade circular sawing machines with travelling table; nomenclature and acceptance conditions
ISO 7987-1985 木工机械 木工车床 术语和验收条件 Woodworking machines; Turning lathes; Nomenclature and acceptance conditions
ISO 7988-1988 木工机械 双头开榫机 术语和验收条件 Woodworking machines; double-end tenoning machines; nomenclature and acceptance conditions
ISO 8206-1991 氧气切割机验收试验 重复精度 工作特性 Acceptance tests for oxygen cutting machines; reproducible accuracy; operational characteristics
ISO 8579-1-2002 齿轮装置验收规程.第1部分:空气载声的试验规程 Acceptance code for gear units - Part 1: Test code for airborne sound
ISO 8579-2-1993 齿轮验收规则 第2部分:验收试验中齿轮装置机械振动测定 Acceptance code for gears; part 2: determination of mechanical vibrations of gear units during acceptance testing
ISO 8636-1-2000 机床 龙门铣床的验收条件 精度检验 第1部分:固定式龙门铣床 Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 1: Fixed bridge (portal-type) machines
ISO 8636-2-1988 龙门铣床的验收条件 精度检验 第2部分:移动龙门铣床 Acceptance conditions for plano-milling machines; testing of the accuracy; part 2: gantry-type machines
ISO 8956-1986 整体式或非整体式车床用仿形装置验收条件 精度检验 Acceptance conditions for copying attachments, integral or otherwise, for lathes; testing of the accuracy
ISO 9906-1999 回转动力泵 液压性能验收试验 等级1和2 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
ISO/IEC TR 14763-3-2000 信息技术 用户建筑群布缆的实现和操作 第3部分:光缆缚设的验收测试 ()
ISO/TS 10303-1012-2004 工业自动化系统和集成.产品数据表示和交换.第1012部分:应用模式:验收 Industrial automation systems and integration - Product data representation and exchange - Part 1012: Application module: Approval
ISO/TS 17477-2003 使用2维移动光学型激光器的焊接和切割用CO2激光束机器的验收试验 Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type
编号中文名称英文名称

返回