| 编号 | 中文名称 | 英文名称 |
|---|
| IEC 60041 Corrigendum 1-1996
| 测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验
| Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
|
| IEC 60041-1991
| 测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验
| Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
|
| IEC 60193-1999
| 水轮机、蓄能泵和水泵水轮机 模型验收试验
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
|
| IEC 60335-2-40 AMD 1-2006
| 家用和类似用途电器.安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求.修改件1
| Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers; Amendment 1
|
| IEC 60335-2-40 AMD 2-2006
| 家用和类似用途电器.安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求.修改件2
| Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers; Amendment 2
|
| IEC 60335-2-40 Edition 4.2-2006
| 家用和类似用途电器.安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求
| Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers
|
| IEC 60335-2-40-2002
| 家用和类似用途电器的安全.第2-40部分:电动热泵、空调器和去湿器的特殊要求
| Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers
|
| IEC 60335-2-41 AMD 1-2005
| 修改件1.家用和类似用途电器.安全.第2-41部分:泵的特殊要求
| Amendment 1 - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
|
| IEC 60335-2-41 Edition 3.1-2005
| 家用和类似用途电器.安全.第2-41部分:泵的特殊要求
| Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
|
| IEC 60335-2-41-2002
| 家用和类似用途电器的安全.第2-41部分:泵的特殊要求
| Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
|
| IEC 60335-2-51-2005
| 家用和类似用途电器.安全.第2-51部分:加热和供水设施用固定式循环泵的特殊要求
| Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
|
| IEC 60601-2-24-1998
| 医用电气设备 第2-24部分:输液泵及其控制器的安全专用要求
| Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers
|
| IEC 60609-1-2004
| 水轮机、蓄能泵和水泵水轮机.气蚀损坏的评定.第1部分:反击式水轮机、蓄能泵和水泵水轮机的评定
| Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines
|
| IEC 60609-2-1997
| 水轮机、蓄能泵和水泵水轮机气蚀损坏的评定 第2部分:水斗式水轮机的评定
| Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines
|
| IEC 60805-1985
| 蓄能泵和作为水泵运行的水泵水轮机的调试、运行和维护指南
| Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
|
| IEC 60994 Corrigendum 1-1997
| 水力机械(水轮机、蓄能泵和水泵水轮机)振动与脉动现场测量指南
| Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
|
| IEC 60994-1991
| 水力机械(水轮机、蓄能泵和水泵水轮机)振动与脉动现场测量指南
| Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
|
| IEC 61290-6-1-1998
| 光学纤维放大器 基础规范 第6-1部分:泵浦泄漏参数的测量方法 光解复用器
| Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
|
| IEC 61702-1995
| 直接耦合光伏水泵系统的额定值
| Rating of direct coupled photovoltaic (PV) pumping systems
|
| IEC/TR3 61366-1-1998
| 水轮机、蓄能泵和水泵水轮机 投标文件 第1部分:总则和附录
| Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 1: General and annexes
|
| IEC/TR3 61366-2-1998
| 水轮机、蓄能泵和水泵水轮机 投标文件 第2部分:轴向辐流式水轮机技术规范指南
| Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 2: Guidelines for technical specifications for Francis turbines
|
| IEC/TR3 61366-3-1998
| 水轮机、蓄能泵和水泵水轮机 投标文件 第3部分:水斗式水轮机的技术规范指南
| Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3: Guidelines for technical specifications for Pelton turbines
|
| IEC/TR3 61366-4-1998
| 水轮机、蓄能泵和水泵水轮机 投标文件 第4部分:转浆式和定浆式水轮机的技术规范指南
| Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines
|
| IEC/TR3 61366-5-1998
| 水轮机、蓄能泵和水泵水轮机 投标文件 第5部分:贯流式水轮机的技术规范指南
| Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 5: Guidelines for technical specifications for tubular turbines
|
| IEC/TR3 61366-6-1998
| 水轮机、蓄能泵和水泵水轮机 投标文件 第6部分:水泵水轮机的技术规范指南
| Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 6: Guidelines for technical specifications for pump-turbines
|
| IEC/TR3 61366-7-1998
| 水轮机、蓄能泵和水泵水轮机 投标文件 第7部分:蓄能泵的技术规范指南
| Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 7: Guidelines for technical specifications for storage pumps
|
| IEC/TS 62091-2003
| 低压开关设备和控制设备.固定式消防泵的驱动器用控制器
| Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps
|
| ISO 10767-1-1996
| 液压传动 系统和元件产生压力波动值的测定 第1部分:用于泵的精密方法
| Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Precision method for pumps
|
| ISO 10767-2-1999
| 液压传动 系统和元件产生压力波动值的测定 第2部分:用于泵的简化方法
| Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 2: Simplified method for pumps
|
| ISO 10816-5-2000
| 机械振动 在非旋转部件上测量和评定机器振动 第5部分:水力发电厂和泵站机组
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants
|
| ISO 12334-2000
| 航空航天 带压力补偿的变流量液压泵 35000 kPa系统的一般要求
| Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems
|
| ISO 13253-1995
| 管道式空调器和气-气加热泵 性能的检测和额定功率
| Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance
|
| ISO 13256-1-1998
| 水源热泵 性能试验和额定功率 第1部分:水-气和盐水-气热泵
| Water-source heat pumps - Testing and rating for performance - Part 1: Water-to-air and brine-to-air heat pumps
|
| ISO 13256-2-1998
| 水源热泵 性能试验和额定功率 第2部分:水-水和盐水-水热泵
| Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps
|
| ISO 13261-1-1998
| 空调和空气源热泵设备的声功率额定值 第1部分:无室外管道设备
| Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment
|
| ISO 13261-2-1998
| 空调和空气源热泵设备的声功率额定值 第2部分:无室内管道设备
| Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment
|
| ISO 13457-2000
| 农业灌溉设备 水驱动的化学制剂喷射泵
| Agricultural irrigation equipment - Water-driven chemical injector pumps
|
| ISO 13709-2003
| 石油、石油化工和天然气工业用离心泵
| Centrifugal pumps for petroleum, petrochemical and natural gas industries
|
| ISO 13710-2004
| 石油、石油化学和天然气工业.往复式变容真空泵
| Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps
|
| ISO 13948-1-2000
| 柴油机 燃料喷射泵和燃料喷射器低压连接 第1部分:螺纹连接件
| Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections
|
| ISO 13948-2-2000
| 柴油机 燃料喷射泵和燃料喷射器低压连接 第2部分:无螺纹(推进式)连接件
| Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections
|
| ISO 14617-9-2002
| 图表用图形符号.第9部分:泵、压缩机和风扇
| Grahical symbols for diagrams - Part 9: Pumps, compressors and fans
|
| ISO 14681-1998
| 柴油机 燃料喷射泵试验 燃料喷射器的校正
| Diesel engines - Fuel injection pump testing - Calibration fuel injectors
|
| ISO 14847-1999
| 回转容积泵 技术要求
| Rotary positive displacement pumps - Technical requirements
|
| ISO 15083-2003
| 小艇.舱底泵吸系统
| Small craft - Bilge-pumping systems
|
| ISO 15136-1-2001
| 石油和天然气工业用下降孔设备 人工升降机用推进腔体泵系统 第1部分：泵
| Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps
|
| ISO 15136-2-2006
| 石油和天然气工业.人工升降机用推进腔体泵系统.第2部分:表面传动系统
| Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems
|
| ISO 15783-2002
| 无密封旋转动力泵.2级.规范
| Seal-less rotodynamic pumps - Class II - Specification
|
| ISO 16017-1-2000
| 室内、环境和工作场所空气 用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析 第1部分:泵唧
| Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling
|
| ISO 1607-1-1993
| 容积真空泵 性能测量方法 第1部分:体积流速(抽速)的测量
| Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
|
| ISO 1607-2-1989
| 容积真空泵 性能测量方法 第2部分:极限压力的测量
| Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure
|
| ISO 1608-1-1993
| 蒸气真空泵 性能特性的测量 第1部分:体积流速(抽速)的测量
| Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
|
| ISO 1608-2-1989
| 蒸气真空泵 性能特性的测量 第2部分:临界前级压力的测量
| Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure
|
| ISO 16200-1-2001
| 工作场所空气质量 采用溶剂解吸作用/气相色谱法对挥发性有机化合物取样和分析 第1部分：泵激取样法
| Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method
|
| ISO 16330-2003
| 往复式变容真空泵和泵装置.技术要求
| Reciprocating positive displacement pumps and pump units - Technical requirements
|
| ISO 16902-1-2003
| 液压传动.用声强法测定声功率级的试验规程:工程法.第1部分:泵
| Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques: Engineering method - Part 1: Pumps
|
| ISO 17559-2003
| 液压流体动力.电控液压泵.性能特征测定的试验方法
| Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
|
| ISO 17613-1-2006
| 饮用水人工操作泵.选择和验收.第1部分:东南亚
| Manually operated pumps for drinking water - Selection and acceptance - Part 1: Southeast Asia |
| ISO 20763-2004
| 石油和相关产品.液压液耐磨性的测定.叶轮泵法
| Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
|
| ISO 21049-2004
| 泵.离心和旋转泵用轴密封系统
| Pumps - Shaft sealing systems for centrifugal and rotary pumps
|
| ISO 2151-2004
| 声学.压缩机和真空泵的噪声试验规范.工程方法(2级)
| Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)
|
| ISO 21573-1-2006
| 建筑施工机械和设备.混凝土泵.第1部分:技术和工业规范
| Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications
|
| ISO 24490-2005
| 低温容器.低温设备用泵
| Cryogenic vessels - Pumps for cryogenic service
|
| ISO 2714-1980
| 液态烃 用容积置换仪表系统而非分配泵系统测量体积
| Liquid hydrocarbons; Volumetric measurement by displacement meter systems other than dispensing pumps
|
| ISO 2858-1975
| 端吸离心泵(额定压强 16 bar) 标记、性能和尺寸
| End-suction centrifugal pumps (rating 16 bar); Designation, nominal duty point and dimensions
|
| ISO 3019-1-2001
| 液压传动 活塞泵和马达的安装法兰和轴端的尺寸和标识码 第1部分：用米制单位表示的英制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units
|
| ISO 3019-2-2001
| 液压传动 活塞泵和马达的安装法兰和轴端的尺寸和标识码 第2部分：米制系列
| Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series
|
| ISO 3069-2000
| 端吸离心泵 机械密封和软填料密封腔的尺寸
| End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing
|
| ISO 3529-2-1981
| 真空技术 词汇 第2部分:真空泵和有关术语 三种语言版
| Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition
|
| ISO 3661-1977
| 端吸离心泵 底座尺寸和安装尺寸
| End-suction centrifugal pumps; Baseplate and installation dimensions
|
| ISO 3662-1976
| 液压传动 泵和马达 几何排量
| Hydraulic fluid power; Pumps and motors; Geometric displacements
|
| ISO 4008-1-1980
| 道路车辆 喷油泵试验 第1部分:动态条件
| Road vehicles; Fuel injection pump testing; Part 1 : Dynamic conditions
|
| ISO 4008-2-1983
| 道路车辆 喷油泵试验 第2部分:静态条件
| Road vehicles; Fuel injection pump testing; Part 2 : Static conditions
|
| ISO 4008-3 AMD 1-2002
| 道路车辆.喷油泵试验.第3部分:应用和试验程序.修改1
| Road vehicles - Fuel injection pump testing - Part 3: Application and test procedures; Amendment 1
|
| ISO 4008-3-1987
| 道路车辆 喷油泵试验 第3部分:应用和试验程序
| Road vehicles; Fuel injection pump testing; Part 3 : Application and test procedures
|
| ISO 4093-1999
| 柴油机 喷油泵 试验台用高压油管
| Diesel engines - Fuel injection pumps - High-pressure pipes for testing
|
| ISO 4113-1988
| 道路车辆 柴油机喷油泵的校泵油
| Road vehicles; calibration fluid for diesel injection equipment
|
| ISO 4391-1983
| 液压传动 泵、马达和整体式传动装置 参数定义和字母符号
| Hydraulic fluid power; Pumps, motors and integral transmissions; Parameter definitions and letter symbols
|
| ISO 4409-1986
| 液压传动 容积式泵、马达和整体式传动装置 稳态性能测定
| Hydraulic fluid power; Positive displacement pumps, motors and integral transmissions; Determination of steady-state performance
|
| ISO 4412-1-1991
| 液压传动 空气噪声级测定的试验规范 第1部分:泵
| Hydraulic fluid power; test code for determination of airborne noise levels; part 1: pumps
|
| ISO 4412-3-1991
| 液压传动 空气噪声级测定的试验规范 第3部分:泵 采用平行六面体传声器阵列的方法
| Hydraulic fluid power; test code for determination of airborne noise levels; part 3: pumps; method using a parallelepiped microphone array
|
| ISO 5151-1994
| 无输入空调器和热泵 性能参数试验
| Non-ducted air conditioners and heat pumps - Testing and rating for performance
|
| ISO 5198-1987
| 离心泵、混流泵和轴流泵 液压性能试验规范 精密级
| Centrifugal, mixed flow and axial pumps; Code for hydraulic performance tests; Precision grade
|
| ISO 5199-2002
| 离心泵的技术规范.2类
| Technical specifications for centrifugal pumps - Class II
|
| ISO 5302-2003
| 真空技术.涡轮分子泵.性能特征的测量
| Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics
|
| ISO 6145-2-2001
| 气体分析 用动态容量法制备标定用混合气体 第2部分：容量泵
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps
|
| ISO 6519-2004
| 柴油机.喷油泵.轴端和毂盘的锥度
| Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs
|
| ISO 7224-1983
| 葡萄栽培和葡萄酒酿制设备 捣碎泵 试验方法
| Equipment for vine cultivation and wine making; Mash pumps; Methods of test
|
| ISO 7299-1996
| 柴油机 喷油泵端面法兰
| Diesel engines - End-mounting flanges for fuel injection pumps
|
| ISO 7440-1-1991
| 道路车辆 喷油泵试验台 第1部分:标准喷油器总成
| Road vehicles; fuel injection equipment testing; part 1: calibration nozzle and holder assemblies
|
| ISO 7440-2-1991
| 道路车辆 喷油泵试验台 第2部分:孔板流量测量
| Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement
|
| ISO 7876-1 AMD 1-1999
| 燃油系统 词汇 第1部分:喷油泵 修改1 两种语言版
| Fuel injection equipment - Vocabulary - Part 1: Fuel injection pump; Amendment 1
|
| ISO 7876-1-1990
| 燃油系统 词汇 第1部分:喷油泵 三种语言版
| Fuel injection equipment; vocabulary; part 1: fuel injection pumps
|
| ISO 7879-1997
| 柴油机 柱塞式喷油泵 安装尺寸
| Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions
|
| ISO 7886-2-1996
| 一次性使用无菌皮下注射器 第1部分:带动力驱动注射泵的注射器
| Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
|
| ISO 7919-5-2005
| 机械振动.通过旋转轴的测量评价机械振动.第5部分:水力发电厂和泵站机组
| Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants
|
| ISO 8278-1986
| 航空航天 液压式压力补偿变流量泵 一般要求
| Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements
|
| ISO 8426-1988
| 液压传动 容积式泵和马达 空载排量的测定
| Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity
|
| ISO 8849-2003
| 小艇.电动直流舱底泵
| Small craft - Electrically operated direct-current bilge pumps
|
| ISO 8976-2004
| 夹扭钳和剪切钳.水泵钳.尺寸和试验值
| Pliers and nippers - Multiple slip joint pliers - Dimensions and test values
|
| ISO 9534-1989
| 道路车辆 燃油泵的电气连接
| Road vehicles; fuel pump electric connections
|
| ISO 9905 Technical Corrigendum 1-2005
| 离心泵的技术规范.I类.技术勘误1
| Technical specifications for centrifugal pumps - Class I - Technical Corrigendum 1
|
| ISO 9905-1994
| 离心泵技术条件 Ⅰ类
| Technical specifications for centrifugal pumps - Class I
|
| ISO 9906-1999
| 回转动力泵 液压性能验收试验 等级1和2
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
|
| ISO 9908-1993
| 离心泵技术条件 Ⅲ类
| Technical specifications for centrifugal pumps; class III
|
| ISO/TR 17766-2005
| 离心泵运转用粘性液体.性能修正
| Centrifugal pumps handling viscous liquids - Performance corrections
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com