| 编号 | 中文名称 | 英文名称 |
|---|
| IEC 60034-22-1996
| 旋转电机 第22部分:往复式内燃机驱动的发电机组用交流发电机
| Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
|
| IEC 88528-11-2004
| 往复式内燃机驱动交流发电机组.第11部分:旋转的不间断电力系统.性能要求和试验方法
| Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
|
| ISO 11055-1996
| 往复式内燃机的飞轮 离合器的安装尺寸
| Flywheels for reciprocating internal combustion engines - Installation dimensions for clutches
|
| ISO 11102-1-1997
| 往复式内燃机 手柄起动装置 第1部分:安全要求和试验
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests
|
| ISO 11102-2-1997
| 往复式内燃机 手柄起动装置 第2部分:脱开角试验方法
| Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement
|
| ISO 11424-1996
| 内燃机的空气和真空系统用橡胶软管及其管件 规范
| Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
|
| ISO 11806-1997
| 农林机械 由内燃机驱动的便携手持式割灌机和割草机 安全
| Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety
|
| ISO 1204-1990
| 往复式内燃机 旋转方向 气缸和气缸盖上气门标志及直列式内燃机右机、左机和发动机方位的定义
| Reciprocating internal combustion engines; designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
|
| ISO 13332-2000
| 往复式内燃机 在发动机底座处测量由高速和中速往复式内燃机产生的结构噪声的试验规程
| Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
|
| ISO 13738-2000
| 润滑剂、工业润滑油和有关产品(L类) E组(内燃机油) 二冲程汽油机油规格(EGB、EGC、EGD)
| Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
|
| ISO 13774-1998
| 内燃机燃料用橡胶和塑料软管 耐燃性试验方法
| Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability
|
| ISO 14314-2004
| 往复式内燃机.反冲起动设备.一般安全要求
| Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements
|
| ISO 14396-2002
| 往复式内燃机.发动机功率的测量和检测方法.依据ISO 8178的废气排放试验的补充要求
| Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
|
| ISO 15550-2002
| 内燃机.发动机功率的测量和检测方法.一般要求
| Internal combustion engines - Determination and method for the measurement of engine power - General requirements
|
| ISO 19013-1-2005
| 内燃机燃料回路用橡胶软管和管.规范.第1部分:柴油
| Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
|
| ISO 19013-2-2005
| 内燃机燃料回路用橡胶软管和管.规范.第2部分:汽油
| Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels
|
| ISO 19432-2006
| 建筑施工机械和设备.便携、手持、内燃机驱动的切断机.安全要求和试验
| Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing
|
| ISO 19438-2003
| 内燃机用柴油燃料和汽油过滤器.用粒子计数及污物滞留量评定过滤效率
| Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity
|
| ISO 21006-2006
| 内燃机.发动机重量（质量）说明
| Internal combustion engines - Engine weight (mass) declaration
|
| ISO 2261-1994
| 往复式内燃机 手操纵控制机构 标准动作方向
| Reciprocating internal combustion engines - Hand-operated control devices - Standard direction of motion
|
| ISO 22867-2004
| 林业机械.带内燃机的便携式手持机械的振动试验规范.手柄处的振动
| Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
|
| ISO 22868-2005
| 林用机械.带内燃机的便携手持式机械的噪声试验规范.工程法(2级准确度)
| Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)
|
| ISO 2710-1-2000
| 往复式内燃机 词汇 第1部分:发动机设计和运行术语 三种语言版
| Reciprocating internal combustion engines - Vocabulary - Part 1: Terms for engine design and operation
|
| ISO 2710-2-1999
| 往复式内燃机 词汇 第2部分:发动机维修术语 三种语言版
| Reciprocating internal combustion engines - Vocabulary - Part 2: Terms for engine maintenance
|
| ISO 3046-1-2002
| 往复式内燃机.性能.第1部分:功率、燃料消耗量和润滑油消耗量和试验方法说明.通用内燃机的附加要求
| Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods; Additional requirements for engines for general use
|
| ISO 3046-4-1997
| 往复式内燃机 性能 第4部分:调速
| Reciprocating internal combustion engines - Part 4: Speed governing
|
| ISO 3046-5-2001
| 往复式内燃机 性能 第5部分:扭转振动
| Reciprocating internal combustion engines - Performance - Part 5: Torsional vibrations
|
| ISO 3046-6-1990
| 往复式内燃机 性能 第6部分:超速保护
| Reciprocating internal combustion engines; performance; part 6: overspeed protection
|
| ISO 4081-2005
| 内燃机用制冷系统用橡胶软管和管件.规范
| Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
|
| ISO 4548-1-1997
| 内燃机全流式机油滤清器试验方法 第1部分:压差/流量特性
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 1: Differential pressure/flow characteristics
|
| ISO 4548-11-1997
| 内燃机全流式机油滤清器试验方法 第11部分:自洁式滤清器
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters
|
| ISO 4548-12-2000
| 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
|
| ISO 4548-2-1997
| 内燃机全流式机油滤清器试验方法 第2部分:滤芯旁通阀特性
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 2: Element by-pass valve characteristics
|
| ISO 4548-3-1997
| 内燃机全流式机油滤清器试验方法 第3部分:耐高压差和耐高温性
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 3: Resistance to high differential pressure and to elevated temperature
|
| ISO 4548-4-1997
| 内燃机全流式机油滤清器试验方法 第4部分:原始容灰量、滤芯寿命和累积效率(重量法)
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
|
| ISO 4548-5-1990
| 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久性试验
| Methods of test for full-flow lubricating oil filters for internal combustion engines; part 5: cold start simulation and hydraulic pulse durability test
|
| ISO 4548-6 Technical Corrigendum 1-1990
| 内燃机全流式机油滤清器试验方法 第6部分:静态爆破压力试验 技术勘误1
| Methods of test for full-flow lubricating oil filters for internal combustion engines; part 6: static burst pressure test; technical corrigendum 1
|
| ISO 4548-6-1985
| 内燃机全流式机油滤清器试验方法 第6部分:静态爆破压力试验
| Methods of test for full-flow lubricating oil filters for internal combustion engines; Part 6 : Static burst pressure test
|
| ISO 4548-7-1990
| 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验
| Methods of test for full-flow lubricating oil filters for internal combustion engines; part 7: vibration fatigue test
|
| ISO 4548-9-1995
| 内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
|
| ISO 5011-2000
| 内燃机和压缩机的空气进气清洁装置 性能测试
| Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing
|
| ISO 6415-2005
| 内燃机.离心式润滑油滤清器.尺寸
| Internal combustion engines - Spin-on filters for lubricating oil - Dimensions
|
| ISO 6621-1-1986
| 内燃机 活塞环 第1部分:词汇
| Internal combustion engines; Piston rings; Part 1 : Vocabulary
|
| ISO 6621-2-2003
| 内燃机.活塞环.第2部分:检验测量规则
| Internal combustion engines - Piston rings - Part 2: Inspection measuring principles
|
| ISO 6621-3-2000
| 内燃机 活塞环 第3部分:技术规范
| Internal combustion engines - Piston rings - Part 3: Material specifications (Revision of ISO 6621-3:1983)
|
| ISO 6621-4-2003
| 内燃机.活塞环.第4部分:一般规范
| Internal combustion engines - Piston rings - Part 4: General specifications
|
| ISO 6621-5-2005
| 内燃机.活塞环.第5部分:质量要求
| Internal combustion engines - Piston rings - Part 5: Quality requirements
|
| ISO 6622-1-2003
| 内燃机.活塞环.第1部分:矩形铸铁环
| Internal combustion engines - Piston rings - Part 1: Rectangular rings made of cast iron
|
| ISO 6622-2-2003
| 内燃机.活塞环.第2部分:矩形钢环
| Internal combustion engines - Piston rings - Part 2: Rectangular rings made of steel
|
| ISO 6623-2004
| 内燃机.活塞环.铸铁刮环
| Internal combustion engines - Piston rings - Scraper rings made of cast iron
|
| ISO 6624-1-2001
| 内燃机 活塞环 第1部分：铸铁梯形环
| Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast iron
|
| ISO 6624-2-2003
| 内燃机.活塞环.第2部分:半梯形铸铁环
| Internal combustion engines - Piston rings - Part 2: Half keystone rings made of cast iron
|
| ISO 6624-3-2001
| 内燃机 活塞环 第3部分：钢制梯形环
| Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel
|
| ISO 6624-4-2003
| 内燃机.活塞环.第4部分:半梯形钢环
| Internal combustion engines - Piston rings - Part 4: Half keystone rings made of steel
|
| ISO 6626-1989
| 内燃机.活塞环.螺旋撑簧油环
| Internal combustion engines; piston rings; coil-spring-loaded oil control rings
|
| ISO 6626-2-2003
| 内燃机.活塞环.第2部分:窄铸铁环带的螺旋撑簧油环
| Internal combustion engines - Piston rings -- Part 2 Coil-spring-loaded oil control rings of narrow width made of cast iron
|
| ISO 6627-2000
| 内燃机 活塞环 涨簧/组合控油环
| Internal combustion engines - Piston rings - Expander/segment oil-control rings
|
| ISO 6743-15-2000
| 润滑剂、工业润滑油和有关产品(L类) 分类 第15部分:E组(内燃机油)
| Lubricants, industrial oils and related products (class L) - Classification - Part 15: Family E (Internal combustion engine oils)
|
| ISO 6798-1995
| 往复式内燃机 辐射的空气噪声测量 工程法和简易法
| Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method
|
| ISO 6826-1997
| 往复式内燃机 防火
| Reciprocating internal combustion engines - Fire protection
|
| ISO 683-15-1992
| 热处理钢、合金钢和易切钢 第15部分:内燃机用阀门钢
| Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines
|
| ISO 7648-1987
| 往复式内燃机飞轮壳 基本尺寸和公差
| Flywheel housings for reciprocating internal combustion engines; Nominal dimensions and tolerances
|
| ISO 7649-1991
| 往复式内燃机离合器壳 标称尺寸和公差
| Clutch housings for reciprocating internal combustion engines; nominal dimensions and tolerances
|
| ISO 7967-1-2005
| 往复式内燃机.零部件和系统词汇.第1部分:固定件和外部罩盖
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers
|
| ISO 7967-2 AMD 1-1999
| 往复式内燃机 零部件和系统词汇 第2部分:主要运动件 修改1 两种语言版
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 2: Main running gear; Amendment 1
|
| ISO 7967-2-1987
| 往复式内燃机 零部件和系统词汇 第2部分:主要运动件 三种语言版
| Reciprocating internal combustion engines; Vocabulary of components and systems; Part 2 : Main running gear Trilingual edition
|
| ISO 7967-3-1987
| 往复式内燃机 零部件和系统词汇 第3部分:气门、凸轮轴传动和驱动机构 三种语言版
| Reciprocating internal combustion engines; Vocabulary of components and systems; Part 3 : Valves, camshaft drive and actuating mechanisms Trilingual edition
|
| ISO 7967-4-2005
| 往复式内燃机.零部件和系统词汇.第4部分:增压及进/排气管系统
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems
|
| ISO 7967-5-2003
| 往复式内燃机.零件和系统的词汇.第5部分:冷却系统
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems
|
| ISO 7967-6-2005
| 往复式内燃机.零部件和系统词汇.第6部分:润滑系统
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems
|
| ISO 7967-7 Technical Corrigendum 1-2006
| 往复式内燃机.零部件和系统词汇.第7部分:调节系统.技术勘误1
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems; Technical Corrigendum 1
|
| ISO 7967-7-2005
| 往复式内燃机.零部件和系统词汇.第7部分:调节系统
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems
|
| ISO 7967-8-2005
| 往复式内燃机.零部件和系统词汇.第8部分:起动系统
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems
|
| ISO 7967-9-1996
| 往复式内燃机 零部件和系统词汇 第9部分:控制和监测系统 三种语言版
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 9: Control and monitoring systems
|
| ISO 8178-10-2002
| 往复式内燃机.排放测量.第10部分:压燃式发动机瞬态工况排气烟度现场测量用试验周期和试验方法
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurements of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
|
| ISO 8178-11-2006
| 往复式内燃机.废气排放测量.第11部分:瞬态试验条件下非道路车辆发动机排气和颗粒废物排放量现场测量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
|
| ISO 8178-2-1996
| 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
|
| ISO 8178-3-1994
| 往复式内燃机 排放测量 第3部分:稳态工况排气烟度的定义及测量方法
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
|
| ISO 8178-4-1996
| 往复式内燃机 排放测量 第4部分:不同用途发动机的试验周期
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications
|
| ISO 8178-5-1997
| 往复式内燃机.排气污染测定.第5部分:燃料试验
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
|
| ISO 8178-6-2000
| 往复式内燃机 排放测量 第6部分:测量结果和试验报告
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
|
| ISO 8178-7-1996
| 往复式内燃机 排放测量 第7部分:发动机系族的确定
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
|
| ISO 8178-8-1996
| 往复式内燃机 排放测量 第8部分:发动机系组的确定
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
|
| ISO 8178-9 AMD 1-2004
| 往复式内燃机.排放测量.第9部分:压燃式发动机瞬态工况排气烟度试验台测量用试验周期和试验方法
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions; Amendment 1
|
| ISO 8178-9-2000
| 往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度试验台测量用试验方法和试验周期
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
|
| ISO 8528-3-2005
| 往复式内燃机驱动的交流发电机组.第3部分:发电机组用交流发电机
| Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
|
| ISO 8528-5-2005
| 往复式内燃机驱动的交流发电机组.第5部分:发电机组
| Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
|
| ISO 8665-2006
| 小型船舶.海船推进往复式内燃机.动力测量和说明
| Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations
|
| ISO 8999-2001
| 往复式内燃机 图形符号
| Reciprocating internal combustion engines - Graphical symbols
|
| ISO 9785-2002
| 船舶和海上技术.可行驶内燃机车辆的货舱的通风.气流总需量的理论计算
| Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com