| 编号 |
中文名称 |
英文名称 |
| IEC 60191-6-13-2007
|
半导体装置的机械标准化.第6-13部分:小间距球栅阵列和小间距盘栅阵列(FBGA/FLGA)用顶部开口型插座的设计指
|
Mechanical standardization of semiconductor devices - Part 6-13: Design guideline for open-top type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA)
|
| IEC 60191-6-16-2007
|
半导体器件的机械标准化.第6-16部分:半导体试验术语表和BGA、LGA、FBGA和FLGA用老化插座
|
Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA
|
| IEC 60309-1 AMD 1-2005
|
工业用插头、插座和耦合器.第1部分:一般要求.修改件1
|
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements; Amendment 1
|
| IEC 60309-1 Edition 4.1-2005
|
工业用插头、插座和耦合器.第1部分:一般要求
|
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
|
| IEC 60309-1-1999
|
工业用插头、插座和耦合器 第1部分:一般要求
|
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
|
| IEC 60309-2 AMD 1-2005
|
工业用插头、插座和耦合器.第2部分:插销和插套附件的尺寸互换性要求.修改件1
|
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories; Amendment 1
|
| IEC 60309-2 Edition 4.1-2005
|
工业用插头、插座和耦合器.第2部分:插销和插套附件的尺寸互换性要求
|
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
|
| IEC 60309-2-1999
|
工业用插头、插座和耦合器 第2部分:插销和插套附件的尺寸互换性要求
|
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
|
| IEC 60309-4-2006
|
工业用插头,插座和连接器.第4部分:有或没有互锁的开关插座和连接器
|
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
|
| IEC 60526-1978
|
医用X射线设备高压电缆插头插座的连接
|
High-voltage cable plug and socket connections for medical X-ray equipment
|
| IEC 60598-2-12-2006
|
灯具.第2-12部分:特殊要求.安装干线插座的通夜照明灯
|
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
|
| IEC 60603-12-1992
|
印制板用频率低于3MHz的连接器 第12部分:集成电路用系列插座的尺寸、一般要求和试验的详细规范
|
Connectors for frequencies below 3 MHz for use with printed boards; part 12: detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
|
| IEC 60603-5-1987
|
印制板用频率低于3MHz的连接器 第5部分:间距为2.54 mm (0.1 in)双面印制板用的边缘插座连接器和两件式连接
|
Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (O.1 in) spacing
|
| IEC 60603-6-1987
|
印制板用频率低于3MHz的连接器 第6部分:标称厚度为1.6 mm (0.063 in)单面或双面印制板用接触件间距为2.54 m
|
Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge-socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm (0.063 in) nominal thickness.
|
| IEC 60670-23-2006
|
家用和类似用途固定电气设施附件外壳.第23部分:地板插座与接线外壳的特殊要求
|
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures
|
| IEC 60796-3-1990
|
微处理机系统总线 8位和16位数据(MULTIBUS) 第3部分:采用插针和插座连接器(间接配合)作为欧洲卡配置的机械
|
Microprocessor system BUS I, 8-bit and 16-bit data; part 3: mechanical and pin descriptions for the eurocard configuration with pin and socket (indirect) connectors
|
| IEC 60884-1 AMD 1-2006
|
家用和类似用途的插头和插座引出线.第1部分:一般要求.修改件1
|
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements; Amendment 1
|
| IEC 60884-1 Edition 3.1-2006
|
家用和类似用途的插头和插座引出线.第1部分:通用要求
|
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
|
| IEC 60884-1-2002
|
家用和类似用途的插头和插座引出线.第1部分:一般要求
|
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
|
| IEC 60884-2-1-2006
|
家用和类似用途的插头插座.第2-1部分:熔断器插头的特殊要求
|
Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs
|
| IEC 60884-2-2-2006
|
家用和类似用途的插头插座.第2-2部分:电器插座的特殊要求
|
Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances
|
| IEC 60884-2-3-2006
|
家用和类似用途的插头插座.第2-3部分:固定设施用无联锁带开关插座的特殊要求
|
Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations
|
| IEC 60884-2-4-2007
|
家用和类似用途的插头插座.第2-4部分:(SELV)安全特低电压用插头插座的特殊要求
|
Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV
|
| IEC 60884-2-5-1995
|
家用和类似用途的插头插座 第2-5部分:接线板的特殊要求
|
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors
|
| IEC 60884-2-6-1997
|
家用和类似用途的插头插座 第2-6部分:固定设施用带联锁带开关插座的特殊要求
|
Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed installations
|
| IEC 60906-1-1986
|
家用和类似用途插头插座的IEC系统 第1部分:交流16A、250V插头和插座
|
IEC System of plugs and socket outlets for household and similar purposes. Part 1 : Plugs and socket-outlets 16 A 250 V a.c.
|
| IEC 60906-2-1997
|
家用和类似用途插头插座的IEC系统 第2部分:交流15A、125V插头和插座
|
IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c.
|
| IEC 60906-3-1994
|
家用和类似用途插头插座的IEC系统 第3部分:交流和直流16A,6V、12V、24V、48V、安全特低电压(SELV)插头插座
|
IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.c. and d.c.
|
| IEC 61076-2-102-2002
|
电气设备连接器.第2-102部分:经质量评定的圆形连接器.外部低电压电源用插头和插座的分规范
|
Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality; Detail specification for plugs and jacks for external low voltage power supply
|
| IEC 61076-5-2001
|
直流低频模拟及数字高速数据应用系统用连接器 第5部分：经质量评定的成列插座 分规范
|
Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification
|
| IEC 61076-7-100-2006
|
电子设备连接器.第7-100部分:电缆电源插座附件.由高负载矩形或圆形连接器罩和密封系统完整部件组成的米制电
|
Connectors for electronic equipment - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
|
| IEC 62196-1-2004
|
插头、插座、车辆耦合器和引入线.电气车辆传导充电.第1部分:250A a.c 和400A d.c以下的电气车辆的充电
|
Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
|
| IEC/TR 60083-2006
|
IEC成员国中标准化的家用和类似用途的插头和插座
|
Plugs and socket-outlets for domestic and similar general use standardized in the member countries of IEC
|
| ISO 3553-1-1987
|
道路车辆 点火线圈和分电器的高压接头 第1部分:插座型
|
Road vehicles; High-tension connections for ignition coils and distributors; Part 1 : Socket-type
|
| ISO 46-1973
|
航空器 燃油管嘴接地插头和插座
|
Aircraft; Fuel nozzle grounding plugs and sockets
|
| ISO 518-2006
|
摄影.闪光灯和电子闪光装置的有电触点和无电触点的照相机附件插座.规范
|
Photography - Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units - Specification
|
| ISO 5866-1983
|
航空器 有扁接头的2型和3A型插座式的换向继电器 间隙和固定尺寸
|
Aircraft; 2 and 3A plug-in base change-over relays, Type II, with crimped connections; Clearance and fixing dimensions
|
| ISO/TS 21108-2005
|
手持式动力工具.脉冲扳手.电插座接口的尺寸和公差
|
Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket
|
| 编号 |
中文名称 |
英文名称 |
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com