编号 | 中文名称 | 英文名称 |
ANSI/ASTM F1677-2005
| 使用便携式可倾斜铰链支杆滑动测试仪(PIAST)的试验方法
| Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
|
ANSI/ASTM F1678-1997
| 便携式铰链支杆滑动测试仪(PAST)使用试验方法
| Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
|
ANSI/BHMA A156.1-2006
| 合页和铰链
| Butts and Hinges
|
ANSI/BHMA A156.17-2004
| 自闭式铰链和枢轴
| Self-Closing Hinges and Pivots
|
ANSI/BHMA A156.20-2006
| 条式及T形铰链和搭钩
| Strap and Tee Hinges, and Hasps
|
ANSI/BHMA A156.26-2006
| 连续铰链
| Continuous Hinges
|
ANSI/BHMA A156.7-2002
| 样板铰链尺寸
| Template Hinge Dimensions
|
ANSI/SAE J1110-1993
| 橡胶轮胎的铰链集材拖运机的特性和定义
| Specification Definitions - Articulated, Rubber-Tired Log Skidder
|
ASTM F 1758-2005
| 安全等级双开式弹簧门用安全铰链的标准试验方法
| Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
|
BS 2837-1988
| 包装箱提升装置用钢铰链与链带组件规范
| Specification for steel links and strap assemblies for lifting attachments for packing cases
|
BS DD 171-1987
| 铰链或枢轴安装的门的性能要求(包括试验方法)规定指南
| Guide to specifying performance requirements for hinged or pivoted doors (including test methods)
|
BS DD CEN/TS 13126-6-2004
| 建筑五金、窗户和门上窗的装置.要求和试验方法.可变几何形状的固定铰链(有或无摩擦系统)
| Building hardware, fittings for windows and door height windows - Requirements and test methods - Variable geometry stay hinges (with or without a friction system)
|
BS DD CEN/TS 13126-9-2004
| 建筑五金、窗户和门上窗的配件.要求和试验方法.尖轴铰链
| Building hardware, fittings for windows and door height windows - Requirements and test methods - Pivot hinges
|
BS EN 14512-2006
| 危险货物运输用容器.液态化学药品运输用罐设备.带绕轴旋转螺钉的铰链人孔盖和颈环
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole cover and neckrings with pivoting bolts
|
BS EN 948-1999
| 铰链门或旋转门.耐静扭力的测定
| Hinged or pivoted doors - Determination of the resistance to static torsion
|
DD 171-1987
| 铰链门和旋转门性能要求规定指南(包括试验方法)
| Guide to specifying performance requirements for hinged or pivoted doors (including test methods)
|
DIN 18262-1969
| 防火门用可调节非承重弹簧铰链
| Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors
|
DIN 18272-1987
| 防火间隔.防火门的铰链.弹性铰链和支撑铰链
| Fire barrieres; hinges for fire doors; spring hinge and supporting hinge
|
DIN 27203-2-2004
| 铁路车辆的状况.乘客区.第2部分:上车门.结构类型:折叠铰链门
| State of railway vehicles - Passenger area - Part 2: Entrance doors - Type of construction: Folding hinged doors
|
DIN 27203-6-2004
| 铁路车辆的状况.乘客区.第6部分:客车之间的后门/门.结构类型:折叠门、推拉门、旋转装货门、铰链门
| State of railway vehicles - Passenger area - Part 6: End doors/doors between coaches - Type of construction: Folding doors, sliding doors, roller loading doors, hinged doors
|
DIN 28125 Bb.1-1989
| 铰链盖.提升装置结构的示例
| Hinged covers; example for construction of a lifting aid
|
DIN 4000-48-1986
| 门铰链、合页和琴式铰的产品特性图表
| Tabular layouts of article characteristics for door hinges, hinges and piano hinges
|
DIN 48066-1-1975
| 铰链.第2部分:支架铰链(架空电力线用)
| Hinges; supporting hinges (for overhead power lines)
|
DIN 48066-2-1975
| 铰链.第2部分:张力铰链(架空电力线用)
| Hinges; strain hinges (for overheard power lines)
|
DIN 56923-1989
| 舞台工程.舞台设备.插座铰链
| Stage engineering, stage equipment; socket hinges
|
DIN 68856-2-2004
| 家具五金件.术语和定义.第2部分:家具铰链和襟翼铰链
| Hardware for furniture - Terms and definitions - Part 2: Furniture hinges and flap hinges
|
DIN 68857-2004
| 家具五金件.杯形铰链及其安装底板.要求和检验
| Hardware for furniture - Cup hinges and their mounting plates - Requirements and testing
|
DIN 71805-1990
| 角形铰链.球形承窝.开口弹簧卡环
| Angle joints; housings, circlips
|
DIN 7956-1983
| 五金件.轧制长条铰链
| Hardware; continuos hinge rolled
|
DIN 81301-2003
| 船舶用铰链门带碰簧销的插锁
| Mortise-locks with latch-bolt for hinged doors on ships
|
DIN 81302-2003
| 传播用铰链门无碰簧销的插锁
| Mortise-locks without latch-bolt for hinged doors on ships
|
DIN 81303-2003
| 船舶用厕所和浴室的铰链门插锁
| Mortise-locks for hinged doors of lavatory and bath on ships
|
DIN 81306-2003
| 船舶用铰链门无销插锁
| Mortise-locks without bolt for hinged doors on ships
|
DIN 81311-2005
| 船用重型铰链门的带碰簧销的弹簧锁
| Rim-locks with latch-bolt for heavy hinged doors on ships
|
DIN 81312-1987
| 重型铰链门用无簧锁的门缘弹簧锁
| Rim-locks without latch-bolt for heavy hinged doors
|
DIN 81320-1977
| 通道上铰链门用搭扣
| Turnbuckles for flaps in passageways
|
DIN 81401-1978
| 船舱门用的可拆开的连接铰链和折页.用于螺接
| Loose joints butts and hinges for ship's cabin doors; for screwing-on
|
DIN 81402-1978
| 螺钉安装的船舱门用铰链
| Hinges for ship's cabinet doors, for screwing-on
|
DIN 81403-1978
| 舰船用带形铰链
| Strap hinges for ships and boats
|
DIN 83100-1-2002
| 船舶用重型铰链门.第1部分:防风雨(ISO型)、分类和交货技术条件
| Heavy hinged doors on ships - Part 1: Weathertight (ISO-type), classification, technical delivery conditions
|
DIN 83100-11-2002
| 船舶用重型铰链门.第11部分:无防风雨的、分类和交货技术条件
| Heavy hinged doors on ships - Part 11: Non-weathertight, classification, technical delivery conditions
|
DIN 83100-12-2002
| 船用重型铰链门.第12部分:不防风雨门.详细设计要求
| Heavy hinged doors on ships - Part 12: Non weathertight, design details
|
DIN 83100-13-2002
| 船舶用重型铰链门.第13部分:不防风雨的安装
| Heavy hinged doors on ships - Part 13: Non weathertight, installation
|
DIN 83100-2-2002
| 船舶用重型铰链门.第2部分:防风雨(ISO型)的设计细则
| Heavy hinged doors on ships - Part 2: Weathertight (ISO-type), design details
|
DIN 83100-3-2002
| 船用重型铰链门.第3部分:防风雨(ISO型)门.安装
| Heavy hinged doors on ships - Part 3: Weathertight (ISO-type), installation
|
DIN 83104-1985
| 船用重型铰链门和舱口用卡栓
| Dogs for heavy hinged doors on ships and for hatches
|
DIN 83105-2002
| 船舶用重型铰链门的铰链
| Hinges for heavy hinged doors on ships
|
DIN 83106-1984
| 船上重型铰链门和舱口用的密封垫片
| Gaskets for heavy hinged doors on ships and for hatches
|
DIN 83222-2006
| 工作面地板、中间底部和通道用带铰链的盖板
| Hinged flap for working floors, intermediate bottoms and walkways
|
DIN 83406-1-2001
| 船舶设备用铰链.第1部分:短铰链
| Hinges for ships equipment - Part 1: Short type
|
DIN 83406-2-2001
| 船舶设备用铰链.第2部分:长铰链
| Hinges for ships equipment - Part 2: Long type
|
DIN 85005-17-2001
| 船舶和船舶技术.技术文献图形符号.第17部分:门、铰链、操作室、窗、楼梯和电梯
| Ships and marine technology - Graphical symbols for technical documentation - Part 17: Doors, hatches, openings, windows, stairs, elevators
|
DIN CEN/TS 13126-6-2004
| 窗和落地窗用建筑五金和配件.要求和试验方法.第6部分:(有或无摩擦系统的)可变几何形状固定铰链
| Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system); German version CEN/TS 13126-6:2004
|
DIN CEN/TS 13126-9-2004
| 窗和门高窗户的建筑物五金和配件.要求和试验方法.第9部分:尖轴铰链
| Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges; German version CEN/TS 13126-9:2004
|
DIN EN 10223-5-1998
| 栅栏用钢丝和钢丝制品.第5部分:钢丝编制铰链网格和结节网格栅栏
| Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing; German version EN 10223-5:1998
|
DIN EN 1119-1996
| 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和配件.密封性和耐柔性连接和铰链连接磨损能力试验方法
| Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996
|
DIN EN 12982-2000
| 工业阀门.铰链焊接端阀门端对端和中心对末端尺寸
| Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; German version EN 12982:2000
|
DIN EN 131-4-2007
| 梯子.第4部分:单或多铰链接合梯
| Ladders - Part 4: Single or multiple hinge-joint ladders; German version EN 131-4:2007
|
DIN EN 14512-2006
| 危险货物运输用容器.液体化学物品运输的容器设备.绕轴旋转螺钉的铰链人孔盖和颈环
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts; English version of DIN EN 14512:2006-10
|
DIN EN 1935-2002
| 建筑五金件.单轴铰链.要求和试验方法
| Building hardware - Single-axis hinges - Requirements and test methods; German version EN 1935:2002
|
DIN EN 353-1-2002
| 防止人员从高处跌落的保护设备.第1部分:设有刚性铰链的导向跌落保护装置; 德文版本 EN 353-1:2002
| Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line; German version EN 353-1:2002
|
DIN EN 353-2-2002
| 防止人员从高处跌落的保护设备.第2部分:设有柔性铰链的导向跌落保护装置; 德文版本 EN 353-2:2002
| Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line; German version EN 353-2:2002
|
EN 1677-4-2000
| 吊重装置组件 安全 第4部分:铰链 8级
| Components for slings - Safety - Part 4: Links, Grade 8
|
EN 1677-6-2001
| 吊重装置组件 安全 第6部分:铰链 4级
| Components for slings - Safety - Part 6: Links; Grade 4
|
EN 1935-2002
| 建筑五金器具 单轴铰链 要求和试验方法
| Building hardware - Single-axis hinges - Requirements and test methods
|
EN 947-1998
| 铰链门或枢轴门 抗垂直负载的测定
| Hinged or pivoted doors - Determination of the resistance to vertical load
|
EN 948-1999
| 铰链门或枢轴门 耐静力扭转的测定
| Hinged or pivoted doors - Determination of the resistance to static torsion
|
EN ISO 9173-1-1995
| 拔牙钳 第1部分:螺钉和铰链接合型
| Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991)
|
ISO 4141-4-2001
| 道路车辆 多芯连接电缆 第4部分:铰链试验方法和对装芯电缆组件的要求
| Road vehicles - Multi-core connecting cables - Part 4: Articulation test methods and requirements for coiled cable assemblies
|
JB/T 8010.14-1999
| 机床夹具零件及部件 铰链压板
| ()
|
JB/T 8033-1999
| 机床夹具零件及部件 铰链轴
| ()
|
JB/T 8034-1999
| 机床夹具零件及部件 铰链支座
| ()
|
JB/T 8035-1999
| 机床夹具零件及部件 铰链叉座
| ()
|
JB/T 9162.23-1999
| 铰链 尺寸
| ()
|
JIS A1510-3-2001
| 建筑物门配件的试验方法.第3部分:暗装的关门装置、关门装置和铰链关门装置
| Test method for door fittings of buildings -- Part 3: Floor concealed door closers, door closers and hinge closers
|
JIS A8346-2004
| 运土机械.铰链式车架锁.性能要求
| Earth-moving machinery -- Articulated frame lock -- Performance requirements |
JIS T9220-1992
| 外锁紧肘铰链式关节
| Outside locking elbow hinge units
|
NF E28-201-1967
| 润滑装置.铰链盖滑脂塞
| (FLIP TOP LUBRICATOR.)
|
NF F01-031-1976
| 铁路车辆.大型铰链
| (RAILWAY TRANSPORT EQUIPMENT. HEAVY-DUTY HINGES.)
|
NF F01-032-1976
| 铁路车辆.中型和大型铰链. 轴
| (RAILWAY TRANSPORT EQUIPMENT. MEDIUM AND HEAVY-DUTY HINGES. PINS.)
|
NF F31-031-1990
| 铁路车辆.内铰链式门插锁.互换性规格和功能规格
| (RAILWAY ROLLING STOCK. MORTISE LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICATIONS.)
|
NF F31-032-1990
| 铁路车辆.内铰链式门板把锁.互换性规格和功能规格
| (RAILWAY ROLLING STOCK. BRACKET LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICAITONS.)
|
NF L81-313-1978
| 机上提升球头铰链和系环的固定.ISO米制螺纹剖面和BNAE公差
| (AIRCRAFT RECEPTACLES FOR JACKING PADS AND MOORING RINGS. METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).)
|
NF L81-323-1978
| 机上提升球头铰链和系环的固定.ISO米制螺纹剖面和公差
| (AIRCRAFT RECEPTACLES FOR JACKING PADS AND MOORING RINGS.METRIC ISO THREAD PROFILE AND TOLERANCES.)
|
NF L92-313-1978
| 由千斤顶提升飞机用的活动球头铰链.ISO米制螺纹剖面和BNAE公差
| (REMOVABLE AIRCRAFT JACKING PADS WITH METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).)
|
NF P20-517-2000
| 铰链门或支枢式门.门扇静态扭转的测定
| (Hinged or pivoted doors - Determination of the resistance to static torsion.)
|
NF P26-331-1999
| 建筑五金.电磁铰链.要求和试验方法
| (BUILDING HARDWARE. ELECTROMAGNETIC HINGES. REQUIREMENTS AND TEST METHODS.)
|
NF S91-129-1996
| 拔牙钳.第1部分:螺钉和铰链接合型
| (Dental extraction forceps. Part 1 : screw and pin joint types.)
|
NF T57-215-1996
| 塑料管道系统.玻璃增强热固性塑料管和配件接头.挠性和铰链接头耐泄漏和损伤试验方法
| (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.)
|
QB/T 1235-1991
| 塑料门窗合叶(铰链)
| ()
|
QB/T 1242-1991
| 家具五金杯状暗铰链安装尺寸
| ()
|
QB/T 1496-1992
| 事物特性表铰链与门窗合页
| ()
|
QB/T 1738-1993
| 弹簧合页(铰链)
| ()
|
QB/T 2189-1995
| 家具五金杯状暗铰链及其安装座要求和检验
| ()
|
prEN 1636-2-1996
| 无压力排水道和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第2部分:带有挠
| Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints
|
编号 | 中文名称 | 英文名称 |