5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




中国压力标准(GB pressure standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号 中文名称 英文名称
DL 612-1996(2005) 电力工业锅炉压力容器监察规程 ()
DL 647-2004 电站锅炉压力容器检验规程 ()
DL/T 1045-2007 钢弦式孔隙水压力计 vibrating wire piezometers
DL/T 5017-2007 水电水利工程压力钢管制造安装及验收规范 Specifications for manufacture installation and acceptance of steel penstocks in hydroelectric and hydraulic engineering
DL/T 5141-2001 水电站压力钢管设计规范 ()
DL/T 709-1999 压力钢管安全检测技术规程 ()
DL/T 874-2004 电力工业锅炉压力容器安全监督管理(检验)工程师资格考核规则 ()
FZ 90058-1994 压力容器类产品图样标注的规定 ()
FZ/T 90097-1998 染整机械轧车线压力 ()
FZ/T 99097-1998 染整机械轧车线压力 ()
GB 13623-2003 铝压力锅安全及性能要求 Requirement of safety and characterstics of aluminium pressure cooker
GB 14536.7-1996 家用和类似用途电自动控制器压力敏感电自动控制器的特殊要求(包括机械要求) Automatic electrical controls for household and similar use--Particular requirements for automatic electrical pressure sensing controls including mechanicalrequirements
GB 150-1998 钢制压力容器 Steel pressure vessels
GB 15066-2004 不锈钢压力锅 Stainless steel pressure cooker
GB 16749-1997 压力容器波形膨胀节 Bellows expansion joints for pressure vessel
GB 18442-2001 低温绝热压力容器 Cryo-insulation pressure vessels
GB 19189-2003 压力容器用调质高强度钢板 Quenched and tempered high strength steel plates for pressure vessels
GB 19521.14-2004 危险货物中小型压力容器检验安全规范 Safety code for the inspection of medium and minitype receptacles for dangerous goods
GB 20580-2006 化学品分类、警示标签和警示性说明安全规范 压力下气体 Safety rules for classification、precautionary labelling and precautionary statements of chemicals - Gases under pressure
GB 3531-1996 低温压力容器用低合金钢钢板 Low alloy steel plates for low temperature pressure vessels
GB 4584-2007 压力机用光电保护装置技术条件 Specification of active opto-electronic protective devices for presses
GB 4793.8-2008 测量、控制和试验室用电气设备的安全要求 第2-42部分:使用有毒气体处理医用材料及供试验室用的压力灭菌器 ()
GB 5091-1985 压力机的安全装置技术要求 Technical requirememts for safety devices of the presses
GB 5092-1985 压力机用感应式安全装置技术条件 Technical requirements for induction type safety device used for the presses
GB 5093-1985 压力机用手持电磁吸盘技术条件 Technical requirements for hand-held electromagnetic disk used for the presses
GB 5135.10-2006 自动喷水灭火系统 第10部分:压力开关 Automatic sprinkler system-Part10:Pressure switch
GB 713-2008 锅炉和压力容器用钢板 ()
GB 8599-1988 自动控制压力蒸汽灭菌器技术条件 Specifications for automated autoclave sterilizer
GB 9326.5-1988 交流330 kV 及以下油纸绝缘自容式充油电缆及附件压力供油箱 Oil-filled paper-insulated cables and accessories for alternating voltages up to and inclnding 330kV--Pressure tanks
GB/T 1048-2005 管道元件--PN(公称压力)的定义和选用 Pipework components-Definition and selection of PN
GB/T 10924-1989 闭式单点压力机精度 Straight sided one-point mechanical presses--Testing of the accuracy
GB/T 10933-1989 闭式双点压力机精度 Straight sided two-point mechanical presses--Testing of the accuracy
GB/T 11191-2004 航空轮胎爆破压力试验方法 Test method of burst pressure for aircraft tyre
GB/T 11195-1998 航空有内胎轮胎胎圈密合压力试验方法 Bead fit test method for tube aircraft tyre
GB/T 11828.2-2005 水位测量仪器第2部分:压力式水位计 Instruments for Stage Measurement-Part 2:Pressure-Type Stage Guage
GB/T 12242-2005 压力释放装置性能试验规范 Performance Test Code-Pressure Relief Devices
GB/T 1226-2001 一般压力表 General pressure gauge
GB/T 1227-2002 精密压力表 Accurate pressure gauge
GB/T 13877.5-2003 农林拖拉机和自走式机械封闭驾驶室第5部分: 空气压力调节系统试验方法 Tractors and self-propelled machines for agriculture and forestry--Operator enclosure environment--Part 5: Pressurization system test method
GB/T 13927-1992 通用阀门压力试验 Pressure testing for general purpose valves
GB/T 14070-1993 气体分析校准用混合气体的制备压力法 Gas analysis--Preparation of calibration gas mixtures--Manometric method
GB/T 14347-1993 开式压力机型式与基本参数 Open front mechanical power presses--Types and basic parameters
GB/T 15443-1995 压水堆压力容器选材原则与基本要求 Pressurized water reactor pressure vessel--The principle of selecting materials and the basic requirements of the materials
GB/T 15478-1995 压力传感器性能试验方法 Test methods of the performances for pressuretransducer/sensor
GB/T 15820-1995 聚乙烯压力管材与管件连接的耐拉拔试验 Test of resistance to pull out ofjoints between polyethylene (PE) pressure pipes and fittings
GB/T 16407-2006 声学医用体外压力脉冲碎石机的声场特性和测量 Acoustics―Characteristics and measurements of field of Pressurepulse lithotripters
GB/T 16426-1996 粉尘云最大爆炸压力和最大压力上升速率测定方法 Determination for maximumexplosion pressure and maximum rate of pressure rise of dust cloud
GB/T 16805-1997 液体石油管道压力试验 Pressure testing of liquid petroleum pipelines
GB/T 16825.1-2002 静力单轴试验机的检验第1部分:拉力和(或)压力试验机测力系统的检验与校准 Verification of static uniaxial testing machines--Part 1:Tension/compression testing machines--Verification and calibration of the force-measuring system
GB/T 17200-1997 橡胶塑料拉力、压力、弯曲试验机技术要求 Requirements for tensile,flexural and compression testing machines for rubbers and plastics
GB/T 17782-1999 硫化橡胶压力空气热老化试验方法 Rubber,vulcanized--Test method of aging by heat and air pressure
GB/T 18182-2000 金属压力容器声发射检测及结果评价方法 Acoustic emission examination andevaluation of metallic pressure vessels
GB/T 18443.1-2001 低温绝热压力容器试验方法容积测量 Testing method of cryo-insulation pressure vessels--Volume measurement
GB/T 18443.2-2001 低温绝热压力容器试验方法真空度测量 Testing method of cryo-insulation pressure vessels--Vacuum measurement
GB/T 18443.3-2001 低温绝热压力容器试验方法漏率测量 Testing method of cryo-insulation pressure vessels--Leakage measurement
GB/T 18443.4-2001 低温绝热压力容器试验方法漏放气速率测量 Testing method of cryo-insulation pressure vessels--Leak and outgassing rate measurement
GB/T 18443.5-2001 低温绝热压力容器试验方法静态蒸发率测量 Testing method of cryo-insulation pressure vessels--Static vaporation rate measurement
GB/T 18475-2001 热塑性塑料压力管材和管件用材料分级和命名总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient
GB/T 18520-2001 植物保护机械喷雾机喷头和压力表的连接尺寸 Equipment for crop protection--Sprayers--Connecting dimensions for nozzles and manometers
GB/T 18688-2002 农业灌溉设备灌溉阀的压力损失试验方法 Agricultural irrigation equipment--Pressure losses in irrigation valves--Test method
GB/T 18692-2002 农业灌溉设备直动式压力调节器 Agricultural irrigation equipment--Direct-acting pressure regulators
GB/T 18806-2002 电阻应变式压力传感器总规范 General specification for the resistance strain pressure transducer/sensor
GB/T 18945-2003 高聚物多孔弹性材料恒定压力降时流量的估算方法 Polymeric materials,cellular flexible--Method of assessment of air flow value at constant pressure-drop
GB/T 18997.1-2003 铝塑复合压力管第1部分:铝管搭接焊式铝塑管 Polyethylene/Aluminum/Polyethylene composite pressure pipe--Part 1:PE/AL/PE pipe overlap-welded by aluminum pipe
GB/T 18997.2-2003 铝塑复合压力管第2部分:铝管对接焊式铝塑管 Polyethylene/Aluminum/Polyethylene composite pressure pipe--Part 2:PE/AL/PE pipe butt-welded by aluminum pipe
GB/T 19624-2004 在用含缺陷压力容器安全评定 Safety assessment for in-service pressure vessels containing defects
GB/T 19699-2005 船舶与海上技术货油舱压力/真空阀 Ships and marine technology-Pressure/vacuum valves for cargo tanks
GB/T 19812.2-2005 塑料节水灌溉器材压力补偿式滴头及滴灌管 Plastic equipment for water saving irrigation-Pressure compensating emitter and emitting pipe
GB/T 19934.1-2005 液压传动金属承压壳体的疲劳压力试验第1部分:试验方法 Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method
GB/T 19955.2-2005 蒸汽流真空泵性能测量方法第2部分:临界前级压力的测量 Vapour vacuum pumps-Measurement of performance characteristics Part2:Measurement of critical backing pressure
GB/T 19956.2-2005 容积真空泵性能测量方法第2部分:极限压力的测量 Positive-displacement cacuum pumps-Measurement of performance characteristics Part2:Measurement of ultimate pressure
GB/T 20201-2006 灌溉用聚乙烯(PE)压力管机械连接管件 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
GB/T 20207.1-2006 丙烯腈-丁二烯-苯乙烯(ABS)压力管道系统第1部分:管材 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 1: Pipes
GB/T 20207.2-2006 丙烯腈-丁二烯-苯乙烯(ABS)压力管道系统第2部分:管件 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 2: fittings
GB/T 20421.1-2006 液压马达特性的测定第1部分:在恒低速和恒压力下 Hydraulic fluid power―Determination of characteristics of motors―Part 1: At constant low speed and at constant pressure
GB/T 20522-2006 半导体器件第14-3部分: 半导体传感器-压力传感器 Semiconductor devices Part 14-3: Semiconductor sensors - Pressure sensors
GB/T 20663-2006 囊式蓄能用压力容器 Bladder type accumulators
GB/T 20801.1-2006 压力管道规范 工业管道 第1部分:总则 Pressure piping code Industrial piping―Part 1:General
GB/T 20801.2-2006 压力管道规范 工业管道 第2部分:材料 pressure piping code - Industrial piping - Part 2: Materials
GB/T 20801.3-2006 压力管道规范 工业管道 第3部分:设计和计算 Pressure piping code - Industrial piping - Part 3: Design and calculation
GB/T 20801.4-2006 压力管道规范 工业管道 第4部分:制作与安装 Pressure piping code - Industrial piping - Part 4: Fabrication and assembly
GB/T 20801.5-2006 压力管道规范 工业管道 第5部分:检验与试验 Pressure piping code - Industrial piping - Part 5: Inspection and testing
GB/T 20801.6-2006 压力管道规范 工业管道 第6部分:安全防护 Pressure piping code - Industrial piping - Part 6: Safeguarding
GB/T 20910-2007 热水系统用温度压力安全阀 Temperature/pressure safety valve for hot water supply system
GB/T 21190-2007 纸、纸板和瓦楞纸板 压力试验仪的描述与校准 Paper, board and corrugated fibreboard - Description and calibration of compression-testing equipment
GB/T 21432-2008 石墨制压力容器 ()
GB/T 21433-2008 不锈钢压力容器晶间腐蚀敏感性检验 ()
GB/T 21579-2008 危险品 时间/压力试验方法 ()
GB/T 21596-2008 危险品 便携式罐体压力试验方法 ()
GB/T 21616-2008 危险品 易燃液体蒸汽压力试验方法 ()
GB/T 21681-2008 数控压力机、液压机用模拟负荷测试系统 ()
GB/T 2346-2003 流体传动系统及元件公称压力系列 Fluid power systems and components--Nominal pressures
GB/T 2352-2003 液压传动隔离式充气蓄能器压力和容积范围及特征量 Hydraulic fluid power--Gas-loaded accumulators with separator--Ranges of pressures and volumes and characteristic quantities
GB/T 2951.6-1997 电缆绝缘和护套材料通用试验方法第3部分:聚氯乙烯混合料专用试验方法第1节:高温压力试验----抗开裂试验 Common test methods for insulating and sheathing materials of electric cables--Part 3:Methods specific to PVC compounds--Section one:Pressure test at high temperature--Test for resistance to cracking
GB/T 3411-1994 差动电阻式孔隙压力计 Unbonded elastic wire resistance type pore pressure cell
GB/T 3478.2-1995 圆柱直齿渐开线花键30°压力角尺寸表 Straight cylindrical involute splines--30° pressure angle dimensions tables
GB/T 3478.3-1995 圆柱直齿渐开线花键37.5°压力角尺寸表 Straight cylindrical involutesplines--37.5° pressure angle dimensions tables
GB/T 3478.4-1995 圆柱直齿渐开线花键45°压力角尺寸表 Straight cylindrical involute splines--45° pressure angle dimensions tables
GB/T 3478.6-1995 圆柱直齿渐开线花键30°压力角M值和W值 Straight cylindrical involute splines--30°pressurengle M and W values
GB/T 3478.7-1995 圆柱直齿渐开线花键37.5°压力角M值和W值 Straight cylindrical involute splines--37.5°pressure angle M and W values
GB/T 3478.8-1995 圆柱直齿渐开线花键45°压力角M值和W值 Straight cylindrical involute splines--45°pressure angle M and W values
GB/T 3722-1992 液压式压力试验机 Hydraulic compression testing machines
GB/T 3751-2008 卡套式压力表管接头 ()
GB/T 392-1977 润滑脂压力分油测定法 Determination of colloid-stability of lubricating greases
GB/T 4217-2001 流体输送用热塑性塑料管材公称外径和公称压力 Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressures
GB/T 4546-1998 玻璃瓶罐耐内压力试验方法 Glass containers--Internal pressure resistance--Method of test
GB/T 4830-1984 工业自动化仪表气源压力范围和质量 Pressure range and quality of air supply for the industrial process measurement and control instruments
GB/T 4857.4-2008 包装 运输包装件基本试验 第4部分:采用压力试验机进行的抗压和堆码试验方法 Packaging - Basic tests for transport packages - Part 4:Compression and Stacking tests using a compression tester
GB/T 4974-2005 空压机、凿岩机械与气动工具优先压力 Compressors,rock drilling machines and pneumatic tools-Preferred pressures
GB/T 5104-2004 30°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 30°pressure angle involute splines
GB/T 5105-2004 45°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 45°pressure angle involute splines
GB/T 5351-2005 纤维增强热固性塑料管短时水压失效压力试验方法 Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure
GB/T 5645-2008 扩口式压力表管接头 ()
GB/T 5922-1986 汽车和挂车气压制动装置压力测试连接器 Motor vehicles and towed vehicles--Pressure test connection for compressed-air pneumatic braking equipment
GB/T 6058-2005 纤维缠绕压力容器制备和内压试验方法 Test method for preparation and internal pressure testing of filament-wound pressure vessels
GB/T 6417.2-2005 金属压力焊接头缺欠分类及说明 Classification and explanation of imperfections in pressure welded joints
GB/T 7937-2008 液压气动管接头及其相关元件 公称压力系列 ()
GB/T 8105-1987 压力控制阀试验方法 Hydraulic fluid power--Valves--Testing method of pressure control valves
GB/T 8600-1988 压力蒸汽灭菌器灭菌效果检验方法 Inspecting method for sterilizing effect of automated autoclave sterilizer
GB/T 8650-2006 管线钢和压力容器钢抗氢致开裂评定方法 Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking
GB/T 8892-2005 压力表用铜合金管 Copper alloy tube for pressure gauge
GB/T 9019-2001 压力容器公称直径 Nominal diameter of pressure vessels
GB/T 9574-2001 橡胶和塑料软管及软管组合件试验压力、爆破压力与设计工作压力的比率 Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure
HG 20585-1998 钢制低温压力容器技术规定 ()
HG 20604-1997 钢制管法兰压力——温度等级(欧洲体系) ()
HG 20625-1997 钢制管法兰压力—温度等级(美洲体系) ()
HG 20660-2000 压力容器中化学介质毒性危害和爆炸危险程度分类 ()
HG/T 2353.6-1992 磁浆过滤用滤芯 冒泡压力试验方法 ()
HG/T 2741-1995 压力容器用碳钢铸件技术条件 ()
HG/T 2806-1987 奥氏体不锈钢压力容器制造管理通则 ()
HG/T 3237-2006 橡胶机械用自力式压力调节阀 Self-operated pressure regulators for rubber machinery
JB 3350-1993 机械压力机 安全技术要求 ()
JB 4708-2000 钢制压力容器焊接工艺评定 ()
JB 4726-2000 压力容器用碳素钢和低合金钢锻件 ()
JB 4727-2000 低温压力容器用碳素钢和低合金钢锻件 ()
JB 4728-2000 压力容器用不锈钢锻件 ()
JB 4733-1996 压力容器用爆炸不锈钢复合钢板 ()
JB 4741-2000 压力容器用镊铜合金热轧板材 ()
JB 4742-2000 压力容器用镍铜合金无缝管 ()
JB 4743-2000 压力容器用镍铜合金锻件 ()
JB 4744-2000 钢制压力容器产品焊接试板的力学性能检验 ()
JB 8780-1998 螺旋压力机 安全技术要求 ()
JB 8897-1999 弹性式压力仪表通用安全规范 ()
JB 9968-1999 开式压力机 噪声限值 ()
JB 9974-1999 闭式压力机 噪声限值 ()
JB 9977-1999 双盘摩擦压力 机噪声限值 ()
JB/T 10168-2000 闭式高速精密压力机 技术条件 ()
JB/T 10203-2000 远传压力表 ()
JB/T 10372-2002 液压压力继电器 ()
JB/T 10385-2002 家用和类似用途手动复位压力式热切断器 ()
JB/T 10524-2005 硅压阻式压力传感器 ()
JB/T 10726-2007 扩散硅式压力变送器 Silicon-diffused pressure transmitters
JB/T 10782.2-2007 闭式双动拉伸多连杆压力机 第2部分:精度 Straight-side double-action multi-link-Part 2:Testing of the accuracy
JB/T 10783.2-2007 闭式四点多连杆压力机 第2部分:精度 Straight-side four point multi-link-Part 2:Testing of the accuracy
JB/T 10784-2007 机械式干粉压力机 通用技术条件 General specifications for mechanical dry powder compacting presses
JB/T 1149-1980 扁平钢带压力容器 技术条件 ()
JB/T 1647-1999 闭式单、双点压力机 型式与基本参数 ()
JB/T 1769-1999 闭式单、双点切边压力机 型式与基本参数 ()
JB/T 2001.22-1999 水系统 压力表开关 型式与尺寸(PN=31.5MPa) ()
JB/T 2474-1999 液压螺旋压力机 基本参数 ()
JB/T 2547.1-2007 双盘摩擦压力机 第1部分:技术条件 Friction screw presses-Part 1:Specifications
JB/T 2936.1-1999 闭式冷挤压压力机 型式与基本参数 ()
JB/T 2936.2-1999 闭式冷挤压压力机 技术条件 ()
JB/T 3228-1999 闭式机械压力机 紧固模具用槽、打(顶)杆孔的分布形式与尺寸 ()
JB/T 3847-1999 开式压力机 紧固模具用槽、孔的分布形式与尺寸 ()
JB/T 3848-1999 闭式多工位压力机 精度 ()
JB/T 3880-1985 底传动双动拉伸压力机 技术条件 ()
JB/T 3881-1999 闭式双动拉伸压力机 精度 ()
JB/T 4700-2000 压力容器法兰分类与技术条件 ()
JB/T 4709-2000 钢制压力容器焊接规程 ()
JB/T 4711-2003 压力容器涂敷与运输包装 ()
JB/T 4732-1995(2005) 钢制压力容器分析设计标准 ()
JB/T 4746-2002 钢制压力容器用封头 ()
JB/T 4747-2002 压力容器用钢焊条订货技术条件 ()
JB/T 4748-2002 压力容器用镍及镍基合金爆炸复合钢板 ()
JB/T 4750-2003 制冷装置用压力容器 ()
JB/T 50040-1999 弹性式压力表 可靠性技术要求与考核方法 ()
JB/T 5110.1-1991 螺旋压力机锻模 圆形模块结构与尺寸 ()
JB/T 5110.2-1991 螺旋压力机锻模 矩形模块结构与尺寸 ()
JB/T 5110.3-1991 螺旋压力机锻模 模块技术条件 ()
JB/T 5110.4-1992 螺旋压力机锻模 圆形模块用模座 ()
JB/T 5110.5-1992 螺旋压力机锻模 矩形模块用模座 ()
JB/T 5110.6-1992 螺旋压力机锻模 横座技术条件 ()
JB/T 5110.7-1992 螺旋压力机锻模 压圈 ()
JB/T 5198-2007 模锻螺旋压力机 精度 Die-forging screw presses-Testing of the accuracy
JB/T 5199-1991 开式双点压力机 精度 ()
JB/T 5200-1991 闭式四点压力机 精度 ()
JB/T 5247.1-1998 台式压力机 技术条件 ()
JB/T 5247.2-1998 台式压力机 型式与基本参数 ()
JB/T 5247.3-1999 台式压力机 精度 ()
JB/T 53050-1992 钢制焊接单层压力容器 产品质量分等 ()
JB/T 53051-1992 钢制多层包扎压力容器 产品质量分等 ()
JB/T 53052-1992 热套压力容器 产品质量分等 ()
JB/T 53182-1994 扁平钢带压力容器 质量分等 ()
JB/T 5425-2004 真空压力复合气泵 ()
JB/T 54364-1998 开式压力机 可靠性评定方法 ()
JB/T 54366-1994 闭式压力机可靠性考核评定规范 ()
JB/T 5491-2005 膜片压力表 ()
JB/T 5492-1991 电位器式压力传感器 ()
JB/T 5493-1991 电阻应变式压力传感器 ()
JB/T 5527-2005 船用压力表 ()
JB/T 5528-2005 压力表标度及分划 ()
JB/T 5534-2007 压力式温度控制器用锡青铜波纹管 Tin bronze bellows for pressure temperature controller
JB/T 5537-2006 半导体压力传感器 Semiconductor pressure sensors
JB/T 5924-1991 液压元件压力容腔体的额定疲劳压力和额定静态压力验证方法 ()
JB/T 599-2005 压力表校验器 ()
JB/T 5992.3-1992 机械制造工艺方法分类与代码 压力加工 ()
JB/T 6059.1-1992 机械压力机锻模 导柱 ()
JB/T 6059.2-1992 机械压力机锻模 组合态导套外壳 ()
JB/T 6059.3-1992 机械压力机锻模 组合导套衬套 ()
JB/T 6059.4-1992 机械压力机锻模 组合导套刮圈 ()
JB/T 6059.5-1992 机械压力机锻模 导套盖板 ()
JB/T 6059.6-1992 机械压力机锻模 整体导套 ()
JB/T 6059.7-1992 机械压力机锻模 导套油封圈 ()
JB/T 6059.8-1992 机械压力机锻模 定位销 ()
JB/T 6059.9-1992 机械压力机锻模 定位键 ()
JB/T 6170-2006 压力传感器 Pressure sensors
JB/T 6172-2005 压力传感器 系列型谱 ()
JB/T 6385-2007 锥密封焊接式压力表管接头 ()
JB/T 6488.4-1995 云母带 真空压力浸渍用环氧玻璃粉云母带 ()
JB/T 6490-1992 塑料压力成型机 ()
JB/T 6499.1-1992 机械压力机切边模 导柱 ()
JB/T 6499.2-1992 机械压力机切边模 导套 ()
JB/T 6539-1992(2005) 微型空气压缩机用钢制压力容器 ()
JB/T 6580-1993 开式压力机 精度 ()
JB/T 6580.1-1999 开式压力机 技术条件 ()
JB/T 6580.2-1999 开式压力机 性能要求与试验方法 ()
JB/T 6630-1993 机械密封系统用压力罐 型式、主要尺寸和基本参数 ()
JB/T 6801-1993 压力表阻尼器 技术条件 ()
JB/T 6802-2008 压力控制器 Pressure controller
JB/T 6803.1-1993 液体压力计 一般杯形、U 形压力计 ()
JB/T 6803.2-1993 液体压力计 精密杯形、U 形压力计 ()
JB/T 6804-2006 抗震压力表 Shock-resistant pressure gauge
JB/T 6805-2008 压力表接点装置 技术条件 Technical conditions for contact devices of pressure gauges
JB/T 6962.1-1993 机械压力机锻模 模座 ()
JB/T 6962.2-1993 机械压力机锻模 垫板 ()
JB/T 6962.3-1993 机械压力机锻模 模块 ()
JB/T 7046-2006 液压蓄能器压力容腔体的额定疲劳压力和额定静态压力验证方法 Hydraulic fluid power-Accumulators-Verify methods of rated fatigue pressure and rated static pressure of pressure-containing envelopes
JB/T 7065-2004 变压器用压力释放阀 ()
JB/T 7069-2004 变压器用压力释放阀 试验导则 ()
JB/T 7392-2006 数字压力表 Digital pressure instrument
JB/T 7393-1994 活塞式压力计 ()
JB/T 7482-2008 压电式压力传感器 ()
JB/T 7487.2-2007 金属膜盒 第2部分:金属压力膜盒 Metal capsule-Part 2:Metal pressure capsule
JB/T 7667-1995 在役压力容器声发射检测评定方法 ()
JB/T 7696.1-1995 工程机械用压力表 ()
JB/T 7862.3-2001 农业机械 切割器的压力器 ()
JB/T 7961-1995 制冷用压力、压差控制器 ()
JB/T 8214.7-1999 QDZ气动单元组合仪表 压力变送器 ()
JB/T 8216.5-1999 DDZ-Ⅱ系列电动单元组合仪表 力平衡式压力变送器 ()
JB/T 8217.2-1999 B系列气动基地式仪表 压力仪表 ()
JB/T 8347-1996 开式压力机 操作指示形象符号 ()
JB/T 8348.1-1996 底传动双动拉伸压力机 精度 ()
JB/T 8348.2-1996 底传动双动拉伸压力机 技术条件 ()
JB/T 8472.2-1996 蒸汽流真空泵性能测定 第二部分:临界前级压力的测定 ()
JB/T 8597-1997 钢筋电渣压力焊机技术条件 ()
JB/T 8624-1997 隔膜式压力表 ()
JB/T 8763-2001 电液式水泥压力试验机 技术条件 ()
JB/T 8782-1998 闭式高速精密压力机 精度 ()
JB/T 8839.1-1999 内燃机用磁电式压力表 技术条件 ()
JB/T 8839.2-1999 内燃机用磁电式压力表 试验方法 ()
JB/T 8843.1-1999 内燃机用压力报警器 技术条件 ()
JB/T 8843.2-1999 内燃机用压力报警器 试验方法 ()
JB/T 8904.2-1999 KF系列气动基地式仪表KFK型压力指示调节仪 ()
JB/T 8904.5-1999 KF系列气动基地式仪表KFP型压力指示调节仪 ()
JB/T 8967-1999 家用和类似用途压力式温度控制器 ()
JB/T 9235-1999 工业自动化仪表 公称工作压力值系列 ()
JB/T 9259-1999 蒸汽和气体压力式温度计 ()
JB/T 9271-1999 焊接、切割及类似工艺用压力表 ()
JB/T 9272-1999 氨压力表 ()
JB/T 9273-1999 电接点压力表 ()
JB/T 9274-1999 膜盒压力表 ()
JB/T 9275-1999 电接点膜盒压力表 ()
JB/T 9277-1999 压力表误差表 ()
JB/T 9278-1999 压力表齿轮传动机构 技术条件 ()
JB/T 9448-1999 静电复印机用硅橡胶定影压力辊 技术条件 ()
JB/T 9451-1999 大气压力传感器 试验导则 ()
JB/T 9842-1999 拖拉机、内燃机用弹簧管式压力表 ()
JB/T 9961-1999 开式多工位压力机 精度 ()
JB/T 9964-1999 闭式压力机 技术条件 ()
JC 552-1994 纤维缠绕增强热固性树脂压力管 ()
JC/T 230-1993 石英玻璃管耐内压力检验方法 ()
JC/T 434-1991(1996) 电工用石棉水泥压力板 ()
JC/T 692-1998 反渗透水处理装置用玻璃纤维增强塑料压力壳体 ()
JC/T 717-1990(1996) 地面用玻璃纤维增强塑料压力容器 ()
JC/T 960-2005 水泥胶砂强度自动压力试验机 ()
JJG(石油) 07-1999 机械式井下压力计 ()
JJG(石油) 40-1995 压力式碳酸盐岩含量测量仪 ()
JJG(石油) 9-1999 电子式井下压力计检定规程 ()
JJG(石油)07-1999(2007) 机械式井下压力计检定规程 ()
JJG(石油) 32-1994 耐(抗)震压力表 ()
MT/T 638-1996(2005) 煤矿井下煤层瓦斯压力的直接测定方法 ()
QB 2099.5-1995 家用和类似用途的电气自控制器电气自动控制压力敏感控制器的特殊要求(包括机械要求) ()
QB/T 1164-2000 压力喷雾干燥机 ()
QB/T 1292-1991 自动洗衣机用水位压力开关 ()
QB/T 1755-1993 造纸机械压力洗浆机 ()
QB/T 2072.1-1994 制糖机械压力容器通用零部件钢制平焊法兰 ()
QB/T 2072.10-1994 制糖机械压力容器通用零部件平焊法兰垫片 ()
QB/T 2072.2-1994 制糖机械压力容器通用零部件钢制平焊法兰 ()
QB/T 2072.3-1994 制糖机械压力容器通用零部件换热器用奥氏体不锈钢焊接钢管 ()
QB/T 2072.4-1994 制糖机械压力容器通用零部件钢制悬挂式支座 ()
QB/T 2072.5-1994 制糖机械压力容器通用零部件无折边锥形封头 ()
QB/T 2072.6-1994 制糖机械压力容器通用零部件矩形人孔 ()
QB/T 2072.7-1994 制糖机械压力容器通用零部件视镜 ()
QB/T 2072.8-1994 制糖机械压力容器通用零部件视镜罩 ()
QB/T 2072.9-1994 制糖机械压力容器通用零部件汁汽三通阀 ()
QB/T 2909-2007 温度压力安全保护阀 Temperature/pressure protection values
QB/T 3671-1999 压力式喷雾干燥器 ()
QC/T 217-2007 汽车用压力报警器 Pressure alarms for automobile
SB/T 10440-2007 真空和(或)压力浸注(处理)用木材防腐设备机组 ()
SD 340-1989 火力发电厂锅炉、压力容器焊接工艺评定规程 ()
SH/T 0221-1992(2003) 液化石油气密度或相对密度测定法(压力密度计法) ()
SH/T 0685-1999(2005) 液化石油气密度测定法(压力密度瓶法) ()
SH/T 0719-2002 润滑油氧化诱导期测定法(压力差示扫描量热法) ()
SH/T 0771-2005 石油产品倾点测定法(自动压力脉冲法) ()
SH/T 0790-2007 润滑脂氧化诱导期测定法(压力差示扫描量热法) Standard test method for oxidation induction time of lubricating greases by pressure differential scanning calorimetry
SH/T 3074-2007 石油化工钢制压力容器 Steel pressure vessels of petrochemical
SY/T 0323-2000 玻璃纤维增强热固性树脂压力管道施工及验收规范 ()
SY/T 10044-2002 炼油厂压力泄放装置的尺寸确定、选择和安装的推荐作法 ()
SY/T 5099-1985 石油下井仪器温度、压力分级及其匹配 ()
SY/T 5318-1991(2007) 200-J 型压力计 ()
SY/T 5346-2005 岩石毛管压力曲线的测定 ()
SY/T 5623-1997(2005) 地层孔隙压力预测检测方法 ()
SY/T 5748-1995 岩石中气体突破压力测定 ()
SY/T 6507-2000 压力容器检验规范 维护检验、定级、修理和改造 ()
SY/T 6552-2003 石油工业在用压力容器检验的推荐作法 ()
SY/T 6573-2003 最低混相压力细管实验测定法 ()
SY/T 6640-2005 电子式井下压力计校准方法 ()
SY/T 6738-2008 岩心毛管压力测量仪器通用技术条件 ()
YB 9070-1992(2006年确认) 压力容器设计管理规定 ()
YB 9073-1994(2006年确认) 钢制压力容器设计技术规定 ()
YS/T 683-2008 压力(差压)变送器现场校准规范 Calibration specification for local mounting pressure(differential pressure) transmitter
编号 中文名称 英文名称

返回