5分钟获取标准报价 咨询电话:010-8334-5348 QQ:31794-7760 MSN:wwtrans#126.com




中国螺钉标准(GB screw standards)翻译目录查询

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF | 
编号中文名称英文名称
DL/T 682-1999 母线金具用沉头螺钉 ()
FZ/T 90027-1991 装螺栓螺钉用的冲孔尺寸 ()
FZ/T 90028-1991 轴上紧定螺钉用的孔尺寸 ()
FZ/T 90075-1995 轴上紧定螺钉用的平台 尺寸 ()
GB 3883.2-2005 手持式电动工具的安全第二部分:螺丝刀和冲击扳手的专用要求 Safety of hand-held motor-operated electric tools Part 2:Particular requirements for screwdrivers and impact wrenches
GB/T 100-1986 开槽沉头木螺钉 Slotted countersunk head wood screws
GB/T 101-1986 开槽半沉头木螺钉 Slotted raised countersunk head wood screws
GB/T 102-1986 六角头木螺钉 Hexagon head wood screws
GB/T 10635-2003 螺钉旋具通用技术条件 Screwdrivers--General technical requirements
GB/T 13806.1-1992 精密机械用紧固件十字槽螺钉 Fasteners for fine mechanics--Cross recessed screws
GB/T 13806.2-1992 精密机械用紧固件十字槽自攻螺钉刮削端 Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point
GB/T 14210-1993 墙板自攻螺钉 Dry wall screws
GB/T 15856.1-2002 十字槽盘头自钻自攻螺钉 Cross recessed pan head drilling screws with tapping screw thread
GB/T 15856.2-2002 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head drilling screws
GB/T 15856.3-2002 十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head drilling screws with tapping screw thread
GB/T 15856.4-2002 六角法兰面自钻自攻螺钉 Hexagon flange head drilling screws with tapping screw thread
GB/T 15856.5-2002 六角凸缘自钻自攻螺钉 Hexagon washer head drilling screws
GB/T 16824.1-1997 六角凸缘自攻螺钉 Hexagon head tapping screws with collar
GB/T 16824.2-1997 六角法兰面自攻螺钉 Hexagon flange head tapping screws
GB/T 16938-1997 紧固件螺栓、螺钉、螺柱和螺母通用技术条件 Fasteners--General requirements for bolts,screws,studs and nuts
GB/T 2670.1-2004 内六角花形盘头自攻螺钉 Hexalobular socket pan head tapping screws
GB/T 2670.2-2004 内六角花形沉头自攻螺钉 Hexalobular socket countersunk head tapping screws
GB/T 2670.3-2004 内六角花形半沉头自攻螺钉 Hexalobular socket raised countersunk(oval)head tapping screws
GB/T 2671.1-2004 内六角花形低圆柱头螺钉 Hexalobular socket cheese(short)head screws
GB/T 2671.2-2004 内六角花形圆柱头螺钉 Hexalobular socket head cap screws
GB/T 2672-2004 内六角花形盘头螺钉 Hexalobular socket pan head screws
GB/T 2673-2007 内六角花形沉头螺钉 hexalobular socket countersunk head screws
GB/T 2674-2004 内六角花形半沉头螺钉 Hexalobular socket raised countersunk head screws
GB/T 3098.1-2000 紧固件机械性能螺栓、螺钉和螺柱 Mechanical properties of fasteners--Bolts,screws and studs
GB/T 3098.10-1993 紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母 Mechanical properties of fasteners--Bolts,screws,studs and nuts made of non-ferrous metals
GB/T 3098.11-2002 紧固件机械性能自钻自攻螺钉 Mechanical properties of fasteners--Drilling screws with tapping screw thread
GB/T 3098.13-1996 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm
GB/T 3098.16-2000 紧固件机械性能不锈钢紧定螺钉 Mechanical properties of fasteners--Setscrews made of stainless-steel
GB/T 3098.3-2000 紧固件机械性能紧定螺钉 Mechanical properties of fasteners--Set screws
GB/T 3098.5-2000 紧固件机械性能自攻螺钉 Mechanical properties of fasteners--Tapping screws
GB/T 3098.6-2000 紧固件机械性能不锈钢螺栓、螺钉和螺柱 Mechanical properties of fasteners--Bolts,screws and studs made of stainless-steel
GB/T 3098.7-2000 紧固件机械性能自挤螺钉 Mechanical properties of fasteners--Thread rolling screws
GB/T 3099-1982 螺栓、螺钉、螺母及附件名词术语 Bolts,screws,nuts and accessories--Terminology and nomenclature
GB/T 3103.1-2002 紧固件公差螺栓、螺钉、螺柱和螺母 Tolerances for fasteners--Bolts,screws,studs and nuts
GB/T 3103.2-1982 紧固件公差用于精密机械的螺栓、螺钉和螺母 Tolerances for fasteners--Bolts,screws and nuts for fine mechanics
GB/T 3105-2002 普通螺栓和螺钉头下圆角半径 General purpose bolts and screws--Radii under the head
GB/T 3106-1982 螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度 Bolts,screws and studs--Nominal lengths,and thread lengths for general purpose bolts
GB/T 3229-2000 螺栓螺钉用装配工具机动螺刀头的六角传动端 Assembly tools for bolts and screws--Hexagon drive ends for machine-operated screw driver bits
GB/T 4389-1995 螺钉与螺母的装配工具双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸 Assembly tool for screws and nuts--Open-end double-head engineers wrenches,doublehead box wrenches and combination wrenches--Maximum outside dimensions of heads
GB/T 4625-1998 螺钉和螺母的装配工具术语 Assembly tools for screws and nuts--Nomenclature
GB/T 5276-1985 紧固件螺栓、螺钉、螺柱及螺母尺寸代号和标注 Fasteners--Bolts,screws,studs and nuts--Symbols and designations of dimensions
GB/T 5277-1985 紧固件螺栓和螺钉通孔 Fasteners--Clearance holes for bolts and screws
GB/T 5279-1985 沉头螺钉头部形状和测量 Countersunk head screws--Head configuration and gauging
GB/T 5279.2-1997 沉头螺钉第2部分:十字槽插入深度 Countersunk flat head screws--Part 2:Penetration depth of cross recesses
GB/T 5280-2002 自攻螺钉用螺纹 Tapping screws thread
GB/T 5281-1985 内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws
GB/T 5282-1985 开槽盘头自攻螺钉 Slotted pan head tapping screws
GB/T 5283-1985 开槽沉头自攻螺钉 Slotted countersunk head tapping screws
GB/T 5284-1985 开槽半沉头自攻螺钉 Slotted raised countersunk head tapping screws
GB/T 5285-1985 六角头自攻螺钉 Hexagon head tapping screws
GB/T 5286-2001 螺栓、螺钉和螺母用平垫圈总方案 Plain washers for bolts,screws and nuts--General plan
GB/T 5358-1998 内六角花形螺钉旋具 Hexagon spline screwdrivers
GB/T 5779.1-2000 紧固件表面缺陷螺栓、螺钉和螺柱一般要求 Fasteners--Surface discontinuities--Bolts,screws and studs for general requirements
GB/T 5779.3-2000 紧固件表面缺陷螺栓、螺钉和螺柱特殊要求 Fasteners--Surface discontinuities--Bolts,screws and studs for special requirements
GB/T 6188-2000 螺栓和螺钉用内六角花形 Hexalobular internal driving feature for bolts and screws
GB/T 65-2000 开槽圆柱头螺钉 Slotted cheese head screws
GB/T 6559-1986 自攻锁紧螺钉的螺杆粗牙普通螺纹系列 Screw thread shanks for thread forming screw--Metric coarse thread series
GB/T 6560-1986 十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws
GB/T 6561-1986 十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming screws
GB/T 6562-1986 十字槽半沉头自攻锁紧螺钉 Cross recessed raised countersunk head threadforming screws
GB/T 6563-1986 六角头自攻锁紧螺钉 Hexagon head thread forming screws
GB/T 6564-1986 内六角花形圆柱头自攻锁紧螺钉 Hexagon lobular socket thread forming screws
GB/T 67-2000 开槽盘头螺钉 Slotted pan head screws
GB/T 68-2000 开槽沉头螺钉 Slotted countersunk flat head screws(common head style)
GB/T 69-2000 开槽半沉头螺钉 Countersunk slotted raised head screws(common head style)
GB/T 70.1-2000 内六角圆柱头螺钉 Hexagon socket head cap screws
GB/T 70.2-2000 内六角平圆头螺钉 Hexagon socket button head screws
GB/T 70.3-2000 内六角沉头螺钉 Hexagon socket countersunk head screws
GB/T 71-1985 开槽锥端紧定螺钉 Slotted set screws with cone point
GB/T 72-1988 开槽锥端定位螺钉 Slotted set screws with cone point
GB/T 73-1985 开槽平端紧定螺钉 Slotted set screws with flat point
GB/T 74-1985 开槽凹端紧定螺钉 Slotted set screws with cup point
GB/T 75-1985 开槽长圆柱端紧定螺钉 Slotted set screws with long dog point
GB/T 77-2007 内六角平端紧定螺钉 Hexagon socket set screws with flat point
GB/T 78-2007 内六角锥端紧定螺钉 Hexagon socket set screws with cone point
GB/T 79-2007 内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point
GB/T 80-2007 内六角凹端紧定螺钉 hexagon socket set screws with cup point
GB/T 818-2000 十字槽盘头螺钉 Pan head screws with cross recess
GB/T 819.1-2000 十字槽沉头螺钉第1部分:钢4.8级 Countersunk flat head screws(common head style)with cross recess--Part 1:Steel of property class 4.8
GB/T 819.2-1997 十字槽沉头螺钉第2部分:钢8.8、不锈钢A2-70和有色金属CU2或CU3 Cross recessed countersunk flat head screws(common head style)--Grade A--Part 2:Steel ofproperty class 8.8,stainless steel and non-ferrous metals
GB/T 820-2000 十字槽半沉头螺钉 Countersunk raised head screws (common head style) with cross recess
GB/T 821-1988 方头倒角端紧定螺钉 Square set screws with chamfered end
GB/T 822-2000 十字槽圆柱头螺钉 Cheese head screws with cross recess
GB/T 825-1988 吊环螺钉 Eyebolts
GB/T 828-1988 开槽盘头定位螺钉 Slotted pan head set screws with dog point
GB/T 829-1988 开槽圆柱端定位螺钉 Slotted set screws with dog point
GB/T 83-1988 方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end
GB/T 830-1988 开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder
GB/T 831-1988 开槽无头轴位螺钉 Slotted shoulder screws
GB/T 832-1988 开槽带孔球面圆柱头螺钉 Slotted cap stan screws
GB/T 833-1988 开槽大圆柱头螺钉 Slotted large cheese head screws
GB/T 834-1988 滚花高头螺钉 Knurled thumb screws
GB/T 835-1988 滚花平头螺钉 Knurled screws
GB/T 836-1988 滚花小头螺钉 Knurled screws with small head
GB/T 837-1988 开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
GB/T 838-1988 六角头不脱出螺钉 Hexagon screws with waisted shank
GB/T 839-1988 滚花头不脱出螺钉 Knurled thumb screws with waisted shank
GB/T 84-1988 方头凹端紧定螺钉 Square set screws with cup point
GB/T 840-1988 塑料滚花头螺钉 Plastic diamond knurlhead screws
GB/T 845-1985 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
GB/T 846-1985 十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
GB/T 847-1985 十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
GB/T 85-1988 方头长圆柱端紧定螺钉 Square set screws with long dog point
GB/T 86-1988 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and coneend
GB/T 878-2007 开槽无头螺钉 Slotted headless screws with shank
GB/T 884-1986 螺钉锁紧挡圈 Lock ring with screw
GB/T 885-1986 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip
GB/T 891-1986 螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw
GB/T 9074.1-2002 螺栓或螺钉和平垫圈组合件 Bolt or screw and washer assemblies with plain washers
GB/T 9074.10-1988 十字槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunkhead screw and countersunk external toothed lock washer assemblies
GB/T 9074.18-2002 自攻螺钉和平垫圈组合件 Tapping screw and washer assemblies with plain washers
GB/T 9074.2-1988 十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw andserrated lock washer external teeth assemblies
GB/T 9074.20-2004 十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers
GB/T 9074.3-1988 十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single coil spring lock washer assemblies
GB/T 9074.4-1988 十字槽盘头螺钉,弹簧垫圈和平垫圈组合件 Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies
GB/T 9074.5-2004 十字槽小盘头螺钉和平垫圈组合件 Cross recessed small pan head screw andwasher assemblies with plain washers
GB/T 9074.7-1988 十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw and single coil spring lock washer assemblies
GB/T 9074.8-1988 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件 Cross recessed small pan headscrew,single coil spring lock washer and plain washer assemblies
GB/T 9074.9-1988 十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T 922-1986 木螺钉技术条件 Specifications for wood screws
GB/T 944.1-1985 螺钉用十字槽 Cross recesses for screws
GB/T 9456-1988 十字槽凹穴六角自攻螺钉 Cross recessed hexagon head tapping screws withindentation
GB/T 946-1988 开槽球面圆柱头轴位螺钉 Slotted raised cheese head screws with shoulder
GB/T 947-1988 开槽球面大圆柱头螺钉 Slotted large raised cheese head screws
GB/T 948-1988 开槽沉头不脱出螺钉 Slotted countersunk head screws with waisted shank
GB/T 949-1988 开槽半沉头不脱出螺钉 Slotted raised countersunk head screws with waisted shank
GB/T 950-1986 十字槽圆头木螺钉 Cross recessed round head wood screws
GB/T 951-1986 十字槽沉头木螺钉 Cross recessed countersunk head wood screws
GB/T 952-1986 十字槽半沉头木螺钉 Cross recessed raised countersunk head wood screws
GB/T 97.4-2002 平垫圈用于螺钉和垫圈组合件 Plain washers for screw and washer assemblies
GB/T 97.5-2002 平垫圈用于自攻螺钉和垫圈组合件 Plain washers for tapping sew and washer assemblies
GB/T 99-1986 开槽圆头木螺钉 Slotted round head wood screws
JB/T 10108-1999 电动螺丝刀 ()
JB/T 10652-2006 轮式拖拉机轮毂螺栓、车轮螺钉和螺母 技术条件 Wheeled tractor-Hub bolts,wheel screws and nuts-Specifications
JB/T 2703-1999 微型永磁直流螺丝刀 ()
JB/T 3411.126-1999 端铣刀杆螺钉 尺寸 ()
JB/T 3411.127-1999 端铣刀杆螺钉扳手 尺寸 ()
JB/T 3411.16-1999 内四方紧定螺钉 尺寸 ()
JB/T 3411.90-1999 定心圆锥螺钉 尺寸 ()
JB/T 3926.12-1999 垂直斗式提升机 胶带螺钉参数尺寸 ()
JB/T 4211.1-1996 冷镦螺钉模具终镦 冲头 A型 ()
JB/T 4211.10-1996 冷镦螺钉模具 凹模 B型 ()
JB/T 4211.11-1996 冷镦螺钉模具 凹模 C型 ()
JB/T 4211.12-1996 冷镦螺钉模具 凹模 D型 ()
JB/T 4211.2-1996 冷镦螺钉模具终镦 冲头 B型 ()
JB/T 4211.3-1996 冷镦螺钉模具终镦 冲头 C型 ()
JB/T 4211.4-1996 冷镦螺钉模具终镦 冲头 D型 ()
JB/T 4211.5-1996 冷镦螺钉模具终镦 冲头 E型 ()
JB/T 4211.6-1996 冷镦螺钉模具终镦 冲头 F型 ()
JB/T 4211.7-1996 冷镦螺钉模具终镦 冲头 G型 ()
JB/T 4211.8-1996 冷镦螺钉模具终镦 冲头 H型 ()
JB/T 4211.9-1996 冷镦螺钉模具 凹模 A型 ()
JB/T 4212.1-1996 冷镦内六角圆柱头螺钉模具 初镦冲头 A型 ()
JB/T 4212.10-1996 冷镦内六角圆柱头螺钉模具 初镦凹模 ()
JB/T 4212.11-1996 冷镦内六角圆柱头螺钉模具 成形凹模 ()
JB/T 4212.12-1996 冷镦内六角圆柱头螺钉模具 六角凹模片 ()
JB/T 4212.13-1996 冷镦内六角圆柱头螺钉模具 镦六角凹模 ()
JB/T 4212.2-1996 冷镦内六角圆柱头螺钉模具 初镦冲头顶杆 A型 ()
JB/T 4212.3-1996 冷镦内六角圆柱头螺钉模具 初镦冲头 B型 ()
JB/T 4212.4-1996 冷镦内六角圆柱头螺钉模具 成形冲头 ()
JB/T 4212.5-1996 冷镦内六角圆柱头螺钉模具 内六角冲头 A型 ()
JB/T 4212.6-1996 冷镦内六角圆柱头螺钉模具 内六角冲头 B型 ()
JB/T 4212.7-1996 冷镦内六角圆柱头螺钉模具 内六角冲头 C型 ()
JB/T 4212.8-1996 冷镦内六角圆柱头螺钉模具 内六角冲头 D型 ()
JB/T 4212.9-1996 冷镦内六角圆柱头螺钉模具 初镦成形凹模片 ()
JB/T 5129-2004 纯扭式气动螺丝刀 ()
JB/T 5227.6-1991 气相色谱仪用管路附件 堵头螺钉 ()
JB/T 5343-1999 电动自攻螺丝刀 ()
JB/T 5399-1991 尼龙嵌件锁紧螺栓、螺钉锁紧部分 结构要素与锁紧力矩 ()
JB/T 5614-2006 锯片铣刀、螺钉槽铣刀寿命试验方法 Life testing methods in metal slitting saws and bolt slot cutters
JB/T 7384.13-1994 紧固件 自攻锁紧螺钉外接圆直径量规 ()
JB/T 7384.14-1994 紧固件 木螺钉螺纹小径卡尺 ()
JB/T 7650.5-2008 冲模卸料装置 第5部分:圆柱头卸料螺钉 Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts
JB/T 7650.5-2008 冲模卸料装置 第5部分:圆柱头卸料螺钉 Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts
JB/T 7650.6-2008 冲模卸料装置 第6部分:圆柱头内六角卸料螺钉 Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts
JB/T 7650.6-2008 冲模卸料装置 第6部分:圆柱头内六角卸料螺钉 Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts
JB/T 7755-2007 滚动轴承 附件 外球面球轴承用紧定螺钉 ()
JB/T 8006.1-1999 机床夹具零件及部件 压紧螺钉 ()
JB/T 8006.2-1999 机床夹具零件及部件 六角头压紧螺钉 ()
JB/T 8006.3-1999 机床夹具零件及部件 固定手柄压紧螺钉 ()
JB/T 8006.4-1999 机床夹具零件及部件 活动手柄压紧螺钉 ()
JB/T 8026.6-1999 机床夹具零件及部件 螺钉支承 ()
JB/T 8036.1-1999 机床夹具零件及部件 螺钉支座 ()
JB/T 8042-1999 机床夹具零件及部件 螺钉用垫板 ()
JB/T 8043.1-1999 机床夹具零件及部件 塑料夹具用六角头螺钉 ()
JB/T 8043.2-1999 机床夹具零件及部件 塑料夹具用内六角螺钉 ()
JB/T 8045.5-1999 机床夹具零件及部件 钻套螺钉 ()
JB/T 8046.3-1999 机床夹具零件及部件 镗套螺钉 ()
JB/T 8363.1-1996 沉孔可转位刀片用紧固螺钉头部内六角花型的型式和尺寸 ()
JB/T 8363.2-1996 沉孔可转位刀片用紧固螺钉 技术规范 ()
JB/T 8366-1996 螺钉槽铣刀 ()
JB/T 9151.1-1999 紧固件测试方法 尺寸与几何精度 螺栓、螺钉、螺柱和螺母 ()
JB/T 9151.2-1999 紧固件测试方法 尺寸与几何精度 木螺钉 ()
JB/T 9151.3-1999 紧固件测试方法 尺寸与几何精度 自攻螺钉 ()
JB/T 9158.13-1999 卧式多轴自动车床辅具 方头螺钉尺寸 ()
JB/T 9161.10-1999 内圆磨床接杆用螺钉 尺寸 ()
JB/T 9162.14-1999 带孔滚花螺钉 尺寸 ()
JB/T 9162.14-1999 带孔滚花螺钉 尺寸 ()
JB/T 9162.15-1999 压紧螺钉 尺寸 ()
JB/T 9162.16-1999 圆柱头螺钉 尺寸 ()
QB/T 1906-1993 手表螺钉 ()
QB/T 2146-1995 家用缝纫机挑线杆螺钉 ()
QB/T 2448-1999 手表通用螺钉尺寸系列 ()
QB/T 2564.1-2002 螺钉旋具 命名与术语 ()
QB/T 2564.2-2002 螺钉旋具 一字槽螺钉旋具旋杆 ()
QB/T 2564.3-2002 螺钉旋具 十字槽螺钉旋具旋杆 ()
QB/T 2564.4-2002 螺钉旋具 一字槽螺钉旋具 ()
QB/T 2564.5-2002 螺钉旋具 十字槽螺钉旋具 ()
QB/T 2564.6-2002 螺钉旋具 螺旋棘轮螺钉旋具 ()
QB/T 2564.6-2002 螺钉旋具 螺旋棘轮螺钉旋具 ()
QB/T 3555-1999 家用缝纫机大顶尖螺钉技术条件 ()
QC/T 602-1999(2005) 十字槽大半圆头自攻螺钉 ()
QC/T 602-1999(2005) 十字槽大半圆头自攻螺钉 ()
QC/T 713-2004 塑料(尼龙)用自攻螺钉螺纹 Tapping screws thread for plastic(nylon)
编号中文名称英文名称

返回