| 编号 | 中文名称 | 英文名称 |
|---|
| GB/T 272-1993
| 滚动轴承代号方法
| Rolling bearing--Identification code
|
| GB/T 275-1993
| 滚动轴承与轴和外壳的配合
| Shaft and housing fits for rolling bearings
|
| GB/T 7810-1995
| 滚动轴承带座外球面球轴承外形尺寸
| Rolling bearings--Insert bearing units--Boundary dimensions
|
| GB/T 14364-1993
| 船舶轴系滑动式中间轴承
| Marine intermediate shafting sliding bearing
|
| GB/T 1174-1992
| 铸造轴承合金
| Cast bearing metals
|
| FZ/T 92013-2006
| SL系列上罗拉轴承
| SL series top roller bearings
|
| FZ/T 92024-2006
| LZ系列下罗拉轴承
| LZ series botton roller bearings
|
| GB/T 10445-1989
| 滑动轴承整体轴套的轴径
| Plain bearings--Shaft diameters for unsplit bushes
|
| GB/T 10446-1989
| 滑动轴承整圆止推垫圈尺寸和公差
| Plain bearings--Ring type thrust washers made from strip--Dimensions and tolerances
|
| GB/T 10447-1989
| 滑动轴承半圆止推垫圈要素和公差
| Plain bearings--Pressed bimetallic half thrust washers--Features and tolerances
|
| GB/T 12613.1-2002
| 滑动轴承卷制轴套第1部分:尺寸
| Plain bearings--Wrapped bushes--Part 1:Dimensions
|
| GB/T 12613.2-2002
| 滑动轴承卷制轴套第2部分:外径和内径的检测数据
| Plain bearings--Wrapped bushes--Part 2:Test data for outside and inside diameter
|
| GB/T 12613.3-2002
| 滑动轴承卷制轴套第3部分:润滑油孔、润滑油槽和润滑油穴
| Plain bearings--Wrapped bushes--Part 3:Lubrication holes，lubrication grooves and lubricationindentations
|
| GB/T 12613.4-2002
| 滑动轴承卷制轴套第4部分:材料
| Plain bearings--Wrapped bushes--Part 4:Materials
|
| GB/T 12764-1991
| 滚动轴承冲压外圈滚针轴承外形尺寸方案
| Rolling bearings--Needle rollerbearings，drawn cup，without inner ring--Boundary dimension plan
|
| GB/T 12765-1991
| 关节轴承安装尺寸
| Spherical plain bearings，joint type--Abutment andfillet dimensions
|
| GB/T 12948-1991
| 滑动轴承双金属结合强度破坏性试验方法
| Plain bearings--Metallic multilayer plain bearings--Destructive testing of bond for bearing metals
|
| GB/T 12949-1991
| 滑动轴承覆有减摩塑料层的双金属轴套
| Plain bearings--Bimetallic busheswith plastic overlay
|
| GB/T 13345-1992
| 轧机油膜轴承通用技术条件
| General technical requirement of oil film bearing for rolling mill
|
| GB/T 14036-1993
| 液压缸活塞杆端带关节轴承耳环安装尺寸
| Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions
|
| GB/T 14910-1994
| 滑动轴承厚壁多层轴承衬背技术要求
| Plain bearings--Requirements on backings for thick-walled multilayer bearings
|
| GB/T 16643-1996
| 滚动轴承滚针和推力圆柱滚子组合轴承外形尺寸
| Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions
|
| GB/T 16748-1997
| 滑动轴承金属轴承材料的压缩试验
| Plain bearings--Compression testing of metallic bearing materials
|
| GB/T 16925-1997
| 混凝土及其制品耐磨性试验方法(滚珠轴承法)
| Test method for abrasion resistance of concrete and its products(Ball bearing method)
|
| GB/T 16940-1997
| 直线运动支承直线运动球轴承外形尺寸和公差
| Linear motion bearings--Linear motion ball bearings--Boundary dimensions and tolerances
|
| GB/T 18254-2002
| 高碳铬轴承钢
| High-carbon chromium bearing steel
|
| GB/T 18323-2001
| 滑动轴承烧结轴套的尺寸和公差
| Plain bearings--Sintered bushes--Dimensions and tolerances
|
| GB/T 18324-2001
| 滑动轴承铜合金轴套
| Plain bearings--Copper alloy bushes
|
| GB/T 18325.1-2001
| 滑动轴承流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度
| Plainbearings--Bearing fatigue--Plain bearings in test rigs and in application underconditions of hydrodynamic lubrication
|
| GB/T 18326-2001
| 滑动轴承薄壁滑动轴承用金属多层材料
| Plain bearings--Multilayer materials for thin-walled plain bearings
|
| GB/T 18327.1-2001
| 滑动轴承基本符号
| Plain bearings--Basic symbols
|
| GB/T 18327.2-2001
| 滑动轴承应用符号
| Plain bearings--Applications
|
| GB/T 18329.1-2001
| 滑动轴承多层金属滑动轴承结合强度的超声波无损检验
| Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings
|
| GB/T 18330-2001
| 滑动轴承薄壁轴瓦和薄壁轴套的壁厚测量
| Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
|
| GB/T 18331.1-2001
| 滑动轴承卷制轴套外径的检测
| Plain bearings--Checking the outside diameter for wrapped bushes
|
| GB/T 18579-2001
| 高碳铬轴承钢丝
| High-carbon chromium bearing steel wires
|
| GB/T 18844-2002
| 滑动轴承损坏和外观变化的术语、特征及原因
| Plain bearings--Terms，characteristics and causes of damage and changes in appearance
|
| GB/T 19673-2005
| 直线运动滚动支承套筒型循环球直线运动轴承附件
| Linear motion rolling bearings-Rolling bearings,linear motion ball,recirculating,sleeve type-Accessories
|
| GB/T 20056-2006
| 滚动轴承向心滚针和保持架组件 尺寸和公差
| Rollingbearings - Radialneedlerollerandcageassemblies - Dimensions and tolerances
|
| GB/T 20057-2006
| 滚动轴承 单列圆柱滚子轴承 平挡圈和套圈无挡边端倒角尺寸
| Rolling bearings ― Single-row cylindrical roller bearings ― Chamfer dimensions for loose rib and non-rib sides
|
| GB/T 20058-2006
| 滚动轴承 单列角接触球轴承 外圈非推力端倒角尺寸
| Rolling bearings ― Single-row angular contact ball bearings ― Chamfer dimensions for outer ring non-thrust side
|
| GB/T 20059-2006
| 滚动轴承额定动载荷和额定寿命基本额定动载荷计算中的间断点
| Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings
|
| GB/T 20060-2006
| 滚动轴承圆柱滚子轴承可分离斜挡圈外形尺寸
| Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
|
| GB/T 2688-1981
| 滑动轴承粉末冶金轴承技术条件
| Powder metallurgy plain bearing--Technical requirements
|
| GB/T 271-1997
| 滚动轴承分类
| Rolling bearings--Classification
|
| GB/T 273.1-2003
| 滚动轴承圆锥滚子轴承外形尺寸总方案
| Rolling bearings--Tapered roller bearing--Plan of boundary dimensions
|
| GB/T 273.2-2006
| 滚动轴承推力轴承外形尺寸总方案
| Rolling bearings - Thrust bearings - Boundary dimensions, general plan
|
| GB/T 273.3-1999
| 滚动轴承向心轴承外形尺寸总方案
| Rolling bearings--Radial bearings--Boundary dimensions，general plan
|
| GB/T 274-2000
| 滚动轴承倒角尺寸最大值
| Rolling bearings--Chamfer dimension--Maximumvalues
|
| GB/T 276-1994
| 滚动轴承深沟球轴承外形尺寸
| Rolling bearings--Deep groove ball bearings--Boundary dimensions
|
| GB/T 281-1994
| 滚动轴承调心球轴承外形尺寸
| Rolling bearings--Self-aligning ball bearings--Boundary dimensions
|
| GB/T 285-1994
| 滚动轴承双列圆柱滚子轴承外形尺寸
| Rolling bearings--Double row cylindrical roller bearings--Boundary dimensions
|
| GB/T 288-1994
| 滚动轴承调心滚子轴承外形尺寸
| Rolling bearings--Self-aligning roller bearings--Boundary dimensions
|
| GB/T 2889-1994
| 滑动轴承术语
| Plain bearings--Terms，definitions and classification
|
| GB/T 290-1998
| 滚动轴承冲压外圈滚针轴承外形尺寸
| Rolling bearings--Needle roller bearings，drawn cup without inner rings--Boundary dimensions
|
| GB/T 294-1994
| 滚动轴承三点和四点接触球轴承外形尺寸
| Rolling bearings--Three pointand four point contact ball bearings--Boundary dimensions
|
| GB/T 296-1994
| 滚动轴承双列角接触球轴承外形尺寸
| Rolling bearings--Double row angular contact ball bearings--Boundary dimensions
|
| GB/T 297-1994
| 滚动轴承圆锥滚子轴承外形尺寸
| Rolling bearings--Tapered roller bearings--Boundary dimensions
|
| GB/T 299-1995
| 滚动轴承双列圆锥滚子轴承外形尺寸
| Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions
|
| GB/T 300-1995
| 滚动轴承四列圆锥滚子轴承外形尺寸
| Rolling bearings--Four row tapered roller bearings--Boundary dimensions
|
| GB/T 301-1995
| 滚动轴承推力球轴承外形尺寸
| Rolling bearings--Thrust ball bearings--Boundary dimensions
|
| GB/T 304.1-2002
| 关节轴承分类
| Spherical plain bearings--Classification
|
| GB/T 304.2-2002
| 关节轴承代号方法
| Spherical plain bearings--Identification code
|
| GB/T 304.3-2002
| 关节轴承配合
| Spherical plain bearings--Fits
|
| GB/T 304.9-1981
| 向心关节轴承技术条件
| Spherical plain radial bearings，joint type--Technical requirements
|
| GB/T 305-1998
| 滚动轴承外圈上的止动槽和止动环尺寸和公差
| Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances
|
| GB/T 307.1-2005
| 滚动轴承向心轴承公差
| Rolling bearings-Radial bearings-Tolerances
|
| GB/T 307.2-2005
| 滚动轴承测量和检验的原则及方法
| Rolling bearings-Measuring and gauging principles and methods
|
| GB/T 307.3-2005
| 滚动轴承通用技术规则
| Rolling bearings-General technical regulations
|
| GB/T 307.4-2002
| 滚动轴承推力轴承公差
| Rolling bearings--Thrust bearings--Tolerances
|
| GB/T 308-2002
| 滚动轴承钢球
| Rolling bearings--Steel balls
|
| GB/T 3086-1982
| 高碳铬不锈轴承钢技术条件
| Specification for high carbon chromium stainless bearing steels
|
| GB/T 309-2000
| 滚动轴承滚针
| Rolling bearings--Needle rollers
|
| GB/T 3162-1991
| 滑动轴承薄壁轴瓦尺寸、结构要素与公差
| Plain bearings--Thin-walled bearing shells--Dimensions，structure elements and tolerances
|
| GB/T 3203-1982
| 渗碳轴承钢技术条件
| Specification for carburizing steels of bearings
|
| GB/T 3882-1995
| 滚动轴承外球面球轴承和偏心套外形尺寸
| Rolling bearings--Insert bearings and eccentric looking collars--Boundary dimensions
|
| GB/T 3944-2002
| 关节轴承词汇
| Spherical plain bearings--Vocabulary
|
| GB/T 4199-2003
| 滚动轴承公差定义
| Rolling bearings--Tolerances--Definitions
|
| GB/T 4459.7-1998
| 机械制图滚动轴承表示法
| Mechanical drawings--Representation of rolling bearings
|
| GB/T 4604-2006
| 滚动轴承径向游隙
| Rolling bearings - Radial internal clearance
|
| GB/T 4605-2003
| 滚动轴承推力滚针和保持架组件及推力垫圈
| Rolling bearings--Thrust needle roller and cage assemblies，thrust washers
|
| GB/T 4648-1996
| 滚动轴承圆锥滚子轴承凸缘外圈外形尺寸
| Rolling bearings--Metric tapered roller bearings--Flanged cups--Boundary dimensions
|
| GB/T 4661-2002
| 滚动轴承圆柱滚子
| Rolling bearings--Cylindrical rollers
|
| GB/T 4662-2003
| 滚动轴承额定静载荷
| Rolling bearings--Static load ratings
|
| GB/T 4663-1994
| 滚动轴承推力圆柱滚子轴承外形尺寸
| Rolling bearings--Cylindrical thrust roller bearings--Boundary dimensions
|
| GB/T 5800-2003
| 滚动轴承仪器用精密轴承
| Rolling bearings--Instrument precision bearings
|
| GB/T 5801-2006
| 滚动轴承48、49和69尺寸系列滚针轴承外形尺寸和公差
| Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
|
| GB/T 5859-1994
| 滚动轴承推力调心滚子轴承外形尺寸
| Rolling bearings--Self-aligning thrust roller bearings--Boundary dimensions
|
| GB/T 5868-2003
| 滚动轴承安装尺寸
| Rolling bearings--Mounting dimensions
|
| GB/T 6391-2003
| 滚动轴承额定动载荷和额定寿命
| Rolling bearings--Dynamic load ratings and rating life
|
| GB/T 6445-2007
| 滚动轴承 滚轮滚针轴承 外形尺寸和公差
| ()
|
| GB/T 6930-2002
| 滚动轴承词汇
| Rolling bearings--Vocabulary
|
| GB/T 7217-2002
| 滚动轴承凸缘外圈向心球轴承凸缘尺寸
| Rolling bearings--Radial ball bearings with flanged outer ring--Flange dimensions
|
| GB/T 7218-1995
| 滚动轴承凸缘外圈微型向心球轴承外形尺寸
| Rolling bearings--Miniature radial ball bearings with flanged outer ring--Boundary dimensions
|
| GB/T 7308-1987
| 滑动轴承薄壁翻边轴瓦尺寸、公差及检验方法
| Plain bearings--Thin-walled flanged half bearings--Dimensions， tolerances and methods of checking
|
| GB/T 7631.4-1989
| 润滑剂和有关产品(L类)的分类第4 部分:F组 (主轴、轴承和有关离合器)
| Lubricants and related products (class L)--Classification--Part 4:Family F (Spindlebearings，bearings and associated clutches)
|
| GB/T 7809-1995
| 滚动轴承外球面球轴承座外形尺寸
| Roliing bearings--Housings for insertbearing--Boundary dimensions
|
| GB/T 7811-2007
| 滚动轴承 参数符号
| ()
|
| GB/T 7813-1998
| 滚动轴承附件轴承座外形尺寸(1987年版)
| Rolling bearings accessories--Plummer block housings--Boundary dimensions
|
| GB/T 7948-1987
| 塑料轴承极限PV试验方法
| Test method for PV limit of plastics bearings
|
| GB/T 8597-2003
| 滚动轴承防锈包装
| Rolling bearings--Rust proof packaging
|
| GB/T 8740-2005
| 铸造轴承合金锭
| Casting bearing alloy ingots
|
| GB/T 9160.1-2006
| 滚动轴承附件第1部分：锥形衬套
| Rolling bearings―Accessories―Part 1: Tapered sleeves
|
| GB/T 9160.2-2006
| 滚动轴承附件第2部分:锁紧螺母和锁紧装置
| Rolling bearings-Accessories-Part 2:Locknuts and locking devices
|
| GB/T 9161-2001
| 关节轴承杆端关节轴承
| Spherical plain bearings--Spherical plain bearings rod ends
|
| GB/T 9162-2001
| 关节轴承推力关节轴承
| Spherical plain bearings--Thrust spherical plain bearings
|
| GB/T 9163-2001
| 关节轴承向心关节轴承
| Spherical plain bearings--Radial spherical plain bearings
|
| GB/T 9164-2001
| 关节轴承角接触关节轴承
| Spherical plain bearings--Angular contact radial spherical plain bearings
|
| HG/T 3980-2007
| 汽车轴承用密封圈
| Sealing rings of automobile bearing
|
| JB/T 10650-2006
| 冶金设备用带座剖分式滚动轴承
| Split rolling bearing with housing for metallurgical equipment
|
| JB/T 10781-2007
| 四螺柱滚动轴承座 型式与尺寸
| 4 Sruds rolling bearings block housings-Types and dimensions
|
| JB/T 4071.1-2007
| 轴承套圈磨床 第1部分：外表面磨床 精度检验
| Grinding machines for bearing ring-Part 1: Outer surface grinding machines-Testing of the accuracy
|
| JB/T 4071.2-2007
| 轴承套圈磨床 第2部分：内表面磨床 精度检验
| Grinding machines for bearing ring-Part 2: Inner surface grinding machines-Testing of the accuracy
|
| JB/T 4334-2006
| 静压空气轴承透平膨胀机 技术条件
| Technical conditions for static gas bearing turbo expanders
|
| JB/T 5314-2002
| 滚动轴承 振动（加速度）测量方法
| Rolling bearings-Measuring methods for vibration(acceleration)
|
| JB/T 7293－2007
| 内燃机主轴承盖 螺栓与螺母 技术条件
| Internal combustion engines -Main bearing lid bolts and nuts-Specification
|
| JB/T 9049-2007
| 轧辊油膜轴承
| Oil film bearing for rolling roll
|
| JB/T 9921.2-2007
| 轴承内圈沟超精机和轴承外圈沟超精机 第2部分：技术条件
| Superfinishing machine for groove of bearing inner rings and superfinishing machine for groove of bearing outer rings-Part 2:Specifications |
| YB/T 5144-2006
| 轴承保持器用碳素结构钢丝
| Carbon structural steel wires for bearing cages
|
| JB/T 1255－2001
| 高碳铬轴承钢滚动轴承零件热处理技术条件
| Specification for heat–treatment of rolling bearing parts made from high carbon chromium steel
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com