编号 | 中文名称 | 英文名称 |
ANSI B133.12-1981
| 燃气轮机保养和安全的采购标准
| Gas Turbines - Procurement Standard - Maintenance and Safety
|
ANSI B133.8-1977
| 燃气轮机装置的声辐射
| Installation Sound Emission, Gas Turbine
|
ANSI/ASME B133.7M-1985
| 燃气轮机的燃料
| Fuels, Gas Turbine
|
ANSI/ASME B133.8M-1977
| 燃气轮机装置噪音释放
| Installation Sound Emission, Gas Turbine
|
ANSI/ASME B133.9-1994
| 固定式燃气轮机发动机的废气排放测量
| Measurement of Exhaust Emissions from Stationary Gas Turbine Engines
|
ANSI/ASME PTC22-2005
| 燃气轮机的性能试验规程
| Performance Test Code on Gas Turbines
|
ANSI/ASME PTC4.4-1981
| 燃气轮机热回收蒸汽发电机
| Gas Turbine Heat Recovery Steam Generators
|
ANSI/ASME PTC6A-2000
| 性能试验代码.蒸气轮机.附件
| Performance Test Code - Steam Turbines, Appendix
|
ANSI/ASTM D2880-2003
| 燃气轮机燃料油规范(05.02)
| Gas Turbine Fuel Oils, Specification for (05.02)
|
ANSI/ASTM D4241-1999
| 燃气轮机润滑油系统的设计(05.02)
| Gas Turbine Generator Lubricating Oil System, Design of (05.02)
|
ANSI/ASTM D4378-2003
| 蒸汽和燃气轮机矿物油在运行中的监测
| In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines (05.02)
|
ANSI/ASTM D4418-2001
| 燃气轮机接收、存储与处理的实施规程
| Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
|
ANSI/NFPA 37-2006
| 固定式内燃机和燃气轮机的安装标准
| Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
|
ASME 3977-1-2000
| 燃气轮机.采购.第1部分:一般说明和定义
| (Gas turbines - Procurement - Part 1: General introduction and definitions)
|
ASME 3977-2-2000
| 燃气轮机.采购.第2部分:标准参考条件和额定功率
| (Gas turbines - Procurement - Part 2: Standard reference conditions and ratings)
|
ASME B133.10-1981
| 由使用者和制造者提供的燃气轮机信息
| (Gas turbine information to be supplied by user and manufacturer)
|
ASME B133.11-1982
| 船舶及有关装置用燃气轮机的准备
| (Gas turbine preparation for shipping and installation)
|
ASME B133.12-1981
| 燃气轮机的维护和安全
| (Gas turbine maintenance and safety)
|
ASME B133.16-2000
| 燃气轮机在航海上的应用的采购标准
| (Procurement standard for gas turbine marine applications)
|
ASME B133.1M-1983
| 燃气轮机的术语
| (Gas turbine terminology)
|
ASME B133.2-1977
| 主燃气轮机
| (Basic gas turbine)
|
ASME B133.3-1981
| 燃气轮机辅助设备
| (Gas turbine auxiliary equipment)
|
ASME B133.4-1978
| 燃气轮机的控制和保护系统
| (Gas turbine control and protection systems)
|
ASME B133.5-1978
| 燃气轮机的电气设备
| (Gas turbine electrical equipment)
|
ASME B133.6-1978
| 燃气轮机的额定值和性能
| (Gas turbine ratings and performance)
|
ASME B133.7M-1985
| 燃气轮机的燃料
| (Gas turbine fuels)
|
ASME B133.8-1977
| 燃气轮机装置噪音释放
| (Gas turbine installation sound emissions)
|
ASME PTC 4.4-1981
| 燃气轮机热回收蒸汽发生器
| (Gas turbine heat recovery steam generators)
|
ASTM D 2880-2003
| 燃气轮机用燃料油标准规范
| Standard Specification for Gas Turbine Fuel Oils
|
ASTM D 3605-2000
| 原子吸收和火焰发散分光光度法测定气轮机燃料中痕量金属的标准试验方法
| Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
|
ASTM D 4378-2003
| 蒸汽和燃气轮机用矿物油在使用过程中监测的标准实施规程
| Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
|
ASTM D 4418-2000
| 燃气轮机用燃料的验收、贮存和搬运的标准操作规程
| Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
|
ASTM D 6439-2005
| 汽轮机、燃气轮机和水电轮机润滑系统的清洁、冲洗和净化的标准指南
| Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
|
ASTM D 6522-2000
| 用便携式分析仪测定燃天然气的往复式发动机、燃气轮机、燃烧炉和工艺加热器排放的氧化氮、一氧化碳和氧浓度
| Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
|
ASTM D 6728-2001
| 转盘电极原子发射光谱法测定气轮机和柴油发动机燃料中杂质的标准试验方法
| Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
|
ASTM E 2459-2005
| 测量大型工业燃气轮机和风扇的管内声压级的标准指南
| Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
|
BS 3135-1989
| 燃气轮机验收试验规范
| Specification for gas turbine acceptance test
|
BS 3863-1992
| 燃气轮机采购指南
| Guide for gas turbines procurement
|
BS 6843-2-1988
| 石油燃料的分类.第2部分:工业用和船舶用燃气轮机燃料
| Classification of petroleum fuels - Gas turbine fuels for industrial and marine applications
|
BS 7854-4-1998
| 机械振动.通过测量非旋转零件对机械振动的评估.不包括航空改型机的燃气轮机驱动装置
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Gas turbine driven sets excluding aircraft derivatives
|
BS EN 45510-5-2-1998
| 发电站设备采购指南.燃气轮机
| Guide for the procurement of power station equipment - Gas turbines
|
BS EN ISO 3977-5-2002
| 燃气轮机.采购.石油和天然气工业用设施
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
BS ISO 10494-1994
| 燃气轮机和燃气轮机组.气载噪音的测量.工程/测量方法
| Gas turbines and gas turbine sets - Measurement of emitted airborne noise - Engineering/survey method
|
BS ISO 11042-1-1997
| 燃气轮机.废气排放.第1部分:测量和评估
| Gas turbines - Exhaust gas emission - Measurement and evaluation
|
BS ISO 11042-2-1997
| 燃气轮机.废气排放.第2部分:自动排放监控
| Gas turbines - Exhaust gas emission - Automated emission monitoring
|
BS ISO 11086-1997
| 燃气轮机.词汇
| Gas turbines - Vocabulary
|
BS ISO 19860-2005
| 燃气轮机.燃气轮机装置的数据获取和趋势监控系统要求
| Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations
|
BS ISO 3977-1-2004
| 燃气轮机.采购.序言和定义
| Gas turbines - Procurement - General introduction and definitions
|
BS ISO 3977-2-2004
| 燃气轮机.采购.额定基准条件和特性
| Gas turbines - Procurement - Standard reference conditions and ratings
|
BS ISO 3977-4-2002
| 燃气轮机.采购.燃料和环境
| Gas turbines - Procurement - Fuels and environment - Part 4 : Fuels and environment
|
BS ISO 3977-5-2002
| 燃气轮机.采购.供石油和天然气工业应用
| Gas turbines - Procurement - Applications for petroleum and natural gas industries
|
BS ISO 3977-7-2002
| 燃气轮机.采购.技术信息
| Gas turbines - Procurement - Technical information
|
BS ISO 3977-8-2002
| 燃气轮机.采购.检验、测试、安装和交付使用
| Gas turbines - Procurement - Inspection, testing, installation and commissioning
|
BS ISO 3977-9-2004
| 燃气轮机.采购.可靠性、有效性、维修性和安全性
| Gas turbines - Procurement - Reliability, availability, maintainability and safety
|
BS ISO 7919-4-1996
| 非往复式机械的机械振动.旋转轴的测量和评估标准.第4部分:燃气轮机机组
| Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Gas turbine sets
|
DIN 4340-1976
| 燃气轮机.定义、名称
| Gas Turbines; Definitions, Designations
|
DIN 4341-1-1979
| 燃气轮机.验收试验
| Gas turbines; acceptance tests
|
DIN 4341-2-1986
| 燃气轮机验收试验.第2部分:评价范例
| Gas turbines; acceptance tests; examples for evalution
|
DIN 4342-1979
| 燃气轮机.标准参考条件、标准功率、性能数据
| Gas turbines; standard reference conditions, standard power and performance data
|
DIN EN ISO 3977-5-2003
| 燃气轮机.采购.第5部分:石油和天然气工业用燃气轮机
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003
|
DIN ISO 7919-4-1997
| 非活塞式机器的机械振动.轴振动测量和评定.第4部分:燃气轮机组
| Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 4: Gas turbine sets (ISO 7919-4:1996)
|
EN 45510-5-2-1998
| 发电站设备采购指南 第5-2部分:.燃气轮机
| Guide for procurement of power station equipment - Part 5-2: Gas turbines
|
EN ISO 3977-5-2003
| 燃气轮机 采购 第5部分:石油与天然气工业的应用
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001)
|
GB 14098-1993
| 燃气轮机噪声
| Gas turbine--Noise
|
GB/T 11348.4-1999
| 旋转机械转轴径向振动的测量和评定第4部分:燃气轮机组
| Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 4:Gas turbine sets |
GB/T 11369-1989
| 轻型燃气轮机排气冒烟测量
| Light weight gas turbines exhaust smokes measurement
|
GB/T 11370-1989
| 轻型燃气轮机气态污染物测量
| Gas emissions measurement of light weight gas turbines
|
GB/T 11371-1989
| 轻型燃气轮机使用与维护
| Light weight gas turbine operation and maintenance
|
GB/T 12692.3-1990
| 石油产品燃料 (F类)分类第三部分:工业及船用燃气轮机燃料品种
| Petroleum products--Fuels (class F) classification--Part 3:Categories of gas turbine fuels for industrial and marine applications
|
GB/T 13673-1992
| 轻型燃气轮机辅助设备通用技术条件
| General requirements for light weightgas turbine auxiliary equipment
|
GB/T 13674-1992
| 轻型燃气轮机燃料使用规范
| Applied specification of fuels for light weight gas turbine
|
GB/T 13675-1992
| 轻型燃气轮机运输与安装
| Light weight gas turbines preparation for shipping and installation
|
GB/T 14099-2005
| 燃气轮机采购
| Gas turbines-Procurement
|
GB/T 14099.7-2006
| 燃气轮机采购第7部分:技术信息
| Gas turbines - Procurement - Part 7: Technical information
|
GB/T 14099.9-2006
| 燃气轮机采购第9部分:可靠性、可用性、可维护性和安全性
| Gas turbines - procurement - Part 9: Reliability, availability, maintainability and safety
|
GB/T 14100-1993
| 燃气轮机验收试验
| Gas turbines--Acceptance tests
|
GB/T 14411-1993
| 轻型燃气轮机控制和保护系统
| Control and protective system for light weight gas turbine
|
GB/T 14793-1993
| 燃气轮机总装技术条件
| Assembling technical specifications for gas turbine
|
GB/T 15135-2002
| 燃气轮机词汇
| Gas turbines--Vocabulary
|
GB/T 15736-1995
| 燃气轮机辅助设备通用技术要求
| General requirements for gas turbine auxiliary equipment
|
GB/T 16637-1996
| 轻型燃气轮机电气设备通用技术要求
| General specification for lightweightgas turbine electrical equipment
|
GB/T 18345.1-2001
| 燃气轮机烟气排放第1部分:测量与评估
| Gas turbines--Exhaust gas emission--Part 1:Measurement and evaluation
|
GB/T 18345.2-2001
| 燃气轮机烟气排放第2部分:排放的自动监测
| Gas turbines--Exhaust gas emission--Part 2:Automated emission monitoring
|
GB/T 6075.4-2001
| 在非旋转部件上测量和评价机器的机械振动第4部分:不包括航空器类的燃气轮机驱动装置
| Mechanical vibration--Evaluation of machine vibration by measurementson non-rotating parts--Part 4:Gas turbine driven sets excluding aircraft derivatives
|
IEC 60953-3-2001
| 气轮机热力性能验收试验规则 第3部分:改型气轮机的热性能验证试验
| Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines
|
ISO 10494-1993
| 燃气轮机和燃气轮机组 气载噪音的测量 工程/测量方法
| Gas turbines and gas turbine sets; measurement of emitted airborne noise; engineering/survey method
|
ISO 11042-1-1996
| 燃气轮机 废气排放 第1部分:测试和评估
| Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
|
ISO 11042-2-1996
| 燃气轮机 废气排放 第2部分:排放的自动监测
| Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
|
ISO 11086-1996
| 燃气轮机 词汇 两种语言版
| Gas turbines - Vocabulary
|
ISO 14661-2000
| 工业用热力涡轮机(蒸气轮机、燃气膨胀涡轮) 一般要求
| Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements
|
ISO 19860-2005
| 燃气轮机.燃气轮机装置的数据获取和趋势监控系统要求
| Gas turbines - Data acquisition and trend monitoring system requirements for gas turbine installations
|
ISO 2314 AMD 1-1997
| 燃气轮机 验收试验 修改1:联合循环动力设备的验收试验
| Gas turbines - Acceptance tests; Amendment 1: Acceptance test for combined-cycle power plants
|
ISO 2314 Technical Corrigendum 1-1997
| 燃气轮机 验收试验 技术勘误1
| Gas turbines - Acceptance tests; Technical Corrigendum 1
|
ISO 2314-1989
| 燃气轮机.验收试验
| Gas turbines; acceptance tests
|
ISO 3977-1-1997
| 燃气轮机 采购 第1部分:序言和定义
| Gas turbines - Procurement - Part 1: General introduction and definitions
|
ISO 3977-2-1997
| 燃气轮机.采购.第2部分:额定基准条件和特性
| Gas turbines - Procurement - Part 2: Standard reference conditions and ratings
|
ISO 3977-3-2004
| 燃气轮机.采购.第3部分:设计要求
| Gas turbines - Procurement - Part 3: Design requirements
|
ISO 3977-4-2002
| 燃气轮机.采购.第4部分:燃料和环境
| Gas turbines - Procurement - Part 4: Fuels and environment
|
ISO 3977-5-2001
| 燃气轮机 采购 第5部分:在石油和天然气工业中的应用
| Gas turbines - Procurement - Part 5: Applications for petroleum and natural gas industries
|
ISO 3977-7-2002
| 燃气轮机.采购.第7部分:技术信息
| Gas turbines - Procurement - Part 7: Technical information
|
ISO 3977-8-2002
| 燃气轮机.采购.第8部分:检查、测试、安装和交付使用
| Gas turbines - Procurement - Part 8: Inspection, testing, installation and commissioning
|
ISO 3977-9-1999
| 燃气轮机 采购 第9部分:可靠性、有效性、维修性及安全性
| Gas turbines - Procurement - Part 9: Reliability, availability, maintainability and safety
|
ISO 4261-1993
| 石油产品 燃料(F类) 船和工业用燃气轮机燃料的规格
| Petroleum products; fuels (class F); specifications of gas turbine fuels for industrial and marine applications
|
ISO 6249-1999
| 石油产品 燃气轮机燃料热氧化安定性的测定 JFTOT法
| Petroleum products - Determination of thermal oxidation stability of gas turbine fuels - JFTOT method
|
ISO 7919-4-1996
| 非往复式机器的机械振动 旋转轴的测量和评定准则 第4部分:燃气轮机组
| Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 4: Gas turbine sets
|
ISO 8216-2-1986
| 石油产品 燃料(F类) 分类 第2部分:工业和船用燃气轮机燃料的种类
| Petroleum products; Fuels (class F); Classification; Part 2 : Categories of gas turbine fuels for industrial and marine applications
|
JB/T 2783-1992
| 燃气轮机 型号编制方法
| ()
|
JB/T 5884-1991
| 燃气轮机 控制与保护系统
| ()
|
JB/T 5885-1991
| 燃气轮机 液体燃料接收、贮存和管理
| ()
|
JB/T 5886-1991
| 燃气轮机 气体燃料的使用导则
| ()
|
JB/T 6224-1992
| 燃气轮机 质量控制规范
| ()
|
JB/T 6689-1993
| 燃气轮机 压气机叶片燕尾根槽公差及技术要求
| ()
|
JB/T 6690-1993
| 燃气轮机 透平叶片枞树型叶根、槽公差及技术要求
| ()
|
JB/T 7822-1995
| 燃气轮机 电气设备通用技术条件
| ()
|
JB/T 8741-1998
| 燃气轮机包装与贮运技术条件
| ()
|
JB/T 9589-1999
| 燃气轮机 基本部件
| ()
|
JB/T 9590-1999
| 燃气轮机 维护和安全
| ()
|
JB/T 9591.1-1999
| 燃气轮机 油系统清洁度
| ()
|
JB/T 9591.2-1999
| 燃气轮机 油系统清洁度测试取样
| ()
|
JB/T 9591.3-1999
| 燃气轮机 油系统清洁度测试用显微镜计数法测定油液中固体颗粒污染度
| ()
|
JIS B0128-2005
| 火力发电厂术语汇编.燃气轮机和辅助设备
| Glossary of terms for thermal power plants -- Gas turbine and auxiliary equipment
|
JIS B8040-2005
| 燃气轮机.词汇
| Gas turbines -- Vocabulary
|
JIS B8041-2000
| 燃气轮机.验收试验
| Gas turbines -- Acceptance tests
|
JIS B8042-1-2001
| 燃气轮机.采购.第1部分:概述和定义
| Gas turbines -- Procurement -- Part 1: General introduction and definitions
|
JIS B8042-2-2001
| 燃气轮机.采购.第2部分:标准参考条件和额定值
| Gas turbines -- Procurement -- Part 2: Standard reference conditions and ratings
|
JIS B8042-3-2001
| 燃气轮机.采购.第3部分:设计要求
| Gas turbines -- Procurement -- Part 3: Design requirements
|
JIS B8042-4-2003
| 燃气轮机.采办.第4部分:燃料和环境
| Gas turbines -- Procurement -- Part 4: Fuels and environment
|
JIS B8042-5-2001
| 燃气轮机.采购.第5部分:石油和天然气工业中的应用
| Gas turbines -- Procurement -- Part 5: Applications for petroleum and natural gas industries
|
JIS B8042-6-2003
| 燃气轮机.采办.第6部分:组合循环
| Gas turbines -- Procurement -- Part 6: Combined cycles
|
JIS B8042-7-2001
| 燃气轮机.采购.第7部分:技术信息
| Gas turbines -- Procurement -- Part 7: Technical information
|
JIS B8042-8-2001
| 燃气轮机.采购.第8部分:检查、试验、安装和试运转
| Gas turbines -- Procurement -- Part 8: Inspection, testing, installation and commissioning
|
JIS B8042-9-2003
| 燃气轮机.采办.第9部分:可靠性、可用性、可维护性和安全性
| Gas turbines -- Procurement -- Part 9: Reliability, availability, maintainability and safety
|
JIS B8044-2001
| 燃气轮机和燃气涡轮机组.发出的气载噪声的测量.工程/测量法
| Gas turbines and gas turbine sets -- Measurement of emitted airborne noise -- Engineering/survey method
|
NF E37-501-3-2002
| 燃气轮机.采购.第3部分:设计要求
| (Gas turbines - Procurement - Part 3 : design requirements.)
|
NF E37-501-4-2002
| 燃气轮机.采购.第4部分:燃料和环境
| (Gas turbines - Procurement - Part 4 : fuels and environment.)
|
NF E37-501-5-2003
| 燃气轮机.采购.第5部分:在石油和天然气工业中的应用
| (Gas turbines - Procurement - Part 5 : application for petroleum and natural gas industrie.)
|
NF E37-501-7-2002
| 燃气轮机.采购.第7部分:技术信息
| (Gas turbines - Procurement - Part 7 : technical information.)
|
NF E37-501-8-2002
| 燃气轮机.采购.第8部分:检查,试验,安装和交付使用
| (Gas turbines - Procurement - Part 8 : inspection, testing, installation and commissioning.)
|
NF E37-502-1994
| 燃气轮机和燃气轮机组.辐射空载噪声的测量.工程/监察法
| (Gas turbines and gas turbine sets. Measurement of emitted airborne noise. Engineering/survey method.)
|
NF E37-503-1997
| 燃气轮机.采购.修改1:混合循环装置的基本采购信息
| (GAZ TURBINES. PROCUREMENT. BASIC PROCUREMENT INFORMATION FOR COMBINED-CYCLE PLANTS.)
|
NF E37-504-1-1999
| 燃气轮机.废气排放.第1部分:测量和评价
| (Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.)
|
NF E37-504-2-1999
| 燃气轮机.废气排放.第2部分:自动排放监测
| (Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.)
|
NF M07-051-1999
| 石油产品.燃气轮机燃料的热氧化稳定性的测定.JFTOT法
| (Petroleum products - Determination of thermal oxidation stability of gas turbine fuels - JFTOT method.)
|
NF M15-019-1987
| 石油产品.燃料(F级).分类.第2部分:工业和船舶使用的燃气轮机燃料的种类
| (PETROLEUM PRODUCTS. FUEL (CLASS F). CLASSIFICATION. PART 2 : CATEGORIES OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS.)
|
NF M15-020-1994
| 石油产品.F类燃油.工业和船用燃气轮机燃油规范
| (PETROLEUM PRODUCTS. FUELS (CLASS F). SPECIFICATIONS OF GAS TURBINES FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS.)
|
SH/T 3516-2001
| 催化裂化装置轴流压缩机—烟气轮机机组施工技术规程
| ()
|
SYJ 4040-1989
| 工业燃气轮机安装施工及验收规范
| ()
|
prEN 45537-1995
| 采购指南 涡轮机组 燃气轮机
| Guides for procurement - Turbine group - Gas turbines
|
编号 | 中文名称 | 英文名称 |