| 编号 | 中文名称 | 英文名称 |
|---|
| EN 10246-1-1996
| 钢管的无损检测 第1部分：证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验
| Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
|
| EN 10246-2-2000
| 钢管的无损检测 第2部分：证明液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管（埋弧焊除外） 的自动涡流
| Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
|
| EN 10275-1999
| 金属材料 管式环液压试验
| Metallic materials - Tube ring hydraulic pressure test
|
| EN 10305-4-2003
| 高精密度用途的钢管 交货技术条件 第4部分：液压和气动系统用冷拔无缝钢管
| Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
|
| EN 12107-1997
| 塑料管道系统 压注热塑管件、阀门和辅助设备 管道组件压注用热塑 材料的长期液压强度的测定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
|
| EN 12622-2001
| 液压弯板机 机床安全
| Safety of machine tools - Hydraulic press brakes
|
| EN 13242-2002
| 土木工程作业和公路建设中使用的非粘结和液压粘结材料集料
| Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
|
| EN 1397-1998
| 热交换器 室内液压电扇线圈元件 确定性能的试验程序
| Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
|
| EN 474-5-1996
| 土方机械 安全 第5部分：液压挖掘机的要求
| Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
|
| EN 50289-3-15-2003
| 通信电缆 试验方法规范 第3-15部分：机械试验方法 水下电缆耐液压／注意：和EN 50289-3-1联合使用
| Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1
|
| EN 50340-2001
| 液压电缆切割器 在额定电压高达AC 30 kV的电气设施上使用的装置
| Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002
|
| EN 693-2001
| 机械工具 安全 液压压力机
| Machine tools - Safety - Hydraulic presses
|
| EN 752-4-1997
| 室外建筑物的排水系统 第4部分：液压设计和环境考虑
| Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations
|
| EN 773-1999
| 液压排放管、排水管和污水管构件的一般要求
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
|
| EN 804-1994
| 塑料管道系统 压力管道溶焊接头的喷射铸造插接部件 瞬时内部液压阻力的试验方法
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
|
| EN 81-2-1998+AC-1999
| 电梯建造和安装的安全规则 第2部分：液压梯
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts / Note: To be amended by EN 81-2/prA1 (2003-07).
|
| EN 81-2/prA1-2003
| 电梯建造和安装的安全规则 第2部分：液压梯 修改A1
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; Amendment A1 / Note: Intended as an amendment to EN 81-2 (1998-08).
|
| EN 81-2/prA2-2000
| 电梯建造和安装的安全规则 第2部分：液压梯 修改A2：机械和滑轮空间
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts; A2: Machinery and pulley spaces
|
| EN 81-3-2000
| 电梯建造和安装的安全规则 第3部分：电和液压维修电梯
| Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts
|
| EN 853-1996
| 橡胶软管和软管配件 金属丝编织加强液压型 规范
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
|
| EN 854-1996
| 橡胶软管和软管配件 纺织增强液压型 规范
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
|
| EN 855-1996
| 塑料软管和软管配件 热塑料织物增强液压型 规范
| Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
|
| EN 856-1996
| 橡胶软管和软管配件 橡胶 包覆螺形线增强液压型 规范
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
|
| EN 857-1996
| 橡胶软管和软管配件 液压设备用金属丝编织增强压制型 规范
| Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
|
| EN 911-1995
| 塑料管道系统 热塑塑料压力管道用的弹性密封环型接头和机械接头 外部液压条件下防漏密封试验方法
| Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure
|
| EN 982-1996
| 机械的安全 流体动力系统及其元件的安全要求 液压装置
| Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
|
| EN ISO 10592-1995+A1-2000
| 小艇 液压操舵系统
| Small craft - Hydraulic steering systems (ISO 10592:1994)
|
| EN ISO 12922-2002
| 润滑剂、工业润滑油和有关产品(L类) H组(液压系统)HFAE、HFAS、 HFB、 HFC、 HFDR 和HFDU各品种的规格(包
| Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001)
|
| EN ISO 13938-1-1999
| 纺织品 织物胀破特性 第1部分：胀破强力测定的液压方法
| Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999)
|
| EN ISO 1402-1996
| 橡胶和塑料软管和软管组件 液压试验
| Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994)
|
| EN ISO 4263-2-2003
| 石油和相关产品 抗氧化油及液体老化性能的测定 TOST试验 第2部分：HFC级液压液试验程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003)
|
| EN ISO 4404-2-2003
| 石油与相关产品 阻燃液压油防腐蚀性的测定 第3部分：无水液体
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003)
|
| EN ISO 5198-1998
| 离心泵、混流泵和轴流泵 液压性能试验规范 精密级
| Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class (ISO 5198:1987)
|
| EN ISO 6743-4-2001
| 润滑剂、工业润滑油和有关产品(L类) 分类 第4部分：H组(液压系统)
| Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999)
|
| EN ISO 6803-1997
| 橡胶或塑料软管和软管组件 无弯曲的液压脉冲试验
| Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994)
|
| EN ISO 8032-1999
| 橡胶和塑料软管和软管组件 液压脉冲弯曲试验(半欧姆型试验)
| Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997)
|
| EN ISO 9906-1999
| 回转动力泵 液压性能验收试验 等级1和2
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999)
|
| EN ISO 9974-1-2000
| 通用和液压传动用联接件 带ISO 261 弹性螺纹或金属 金属密封的气门和双头螺栓端头 第1部分：螺纹气门
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
|
| EN ISO 9974-2-2000
| 通用和液压传动用联接件 带ISO 261 弹性螺纹或金属 金属密封的气门和双头螺栓端头 第2部分：弹性密封的
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996)
|
| EN ISO 9974-3-2000
| 通用和液压传动用联接件 带ISO 261 弹性螺纹或金属 金属密封的气门和双头螺栓端头 第3部分：金属 金属
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
|
| prEN 10305-6-1999
| 高精密度用途的钢管 交货技术条件 第6部分：液压和气动系统用冷拔焊接钢管
| Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
|
| prEN 12312-19-1999
| 航空地面辅助设备 特殊要求 第19部分：飞机起重器、轴式起重器和液压尾柱
| Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
|
| prEN 13204-1998
| 用于消防和营救服务的双重作用液压救援工具
| Double acting hydraulic rescue tools for fire and rescue service use
|
| prEN 13802-2000
| 铁路设备 悬挂构件 液压减振冲器
| Railway applications - Suspension components - Hydraulic dampers
|
| prEN 14227-1-2001
| 未粘合及液压粘合的混合物 规范 第1部分：公路路基和底基层用水泥粘合混合物
| Unbound and hydraulically bound mixtures - Specifications - Part 1: Cement bound mixtures for road bases and subbases
|
| prEN 14227-2-2001
| 未粘合及液压粘合的混合物 规范 第2部分 矿渣粘合混合物 定义、成分、分类
| Unbound and hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures - Definitions, composition, classification
|
| prEN 14227-3-2001
| 未粘合及液压粘合的混合物 规范 第3部分： 粘合混合物用灰分 定义、成分、分类
| Unbound and hydraulically bound mixtures - Specifications - Part 3: Fly ash for bound mixtures - Definitions, composition, classification
|
| prEN 14227-4-2001
| 未粘合及液压粘合的混合物 规范 第4部分：液压粘合混合物用灰分 定义、成分、分类
| Unbound and hydraulically bound mixtures - Specifications - Part 4: Fly ash for hydraulically bound mixtures; Definitions, composition, classification
|
| prEN 14227-5-2002
| 未粘合及液压粘合的混合物 规范 第5部分 用液压道路粘合剂粘合的粒状物料 规范 第3部分：定义、成份、
| Unbound and hydraulically bound mixtures - Specifications - Part 5: Granular materials bound with hydraulic road binders; Definitions, composition, classification
|
| prEN 14359-2002
| 液压动力设备的气压蓄能器
| Gas-loaded accumulators for fluid power applications
|
| prEN 4382-1997
| 航空航天系列 固溶处理耐热合金 NI-PH3601 (NiCr22Mo9Nb) 液压用无缝管 D≤50 mm、a≤3 mm
| Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Seamless tubes for hydraulic application D 50 mm, a 3 mm
|
| prEN 474-5-2001
| 土方机械 安全 第5部分：液压挖掘机的要求
| Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
|
| 编号 | 中文名称 | 英文名称 |
|---|
5分钟获取标准报价 咨询电话：010-8334-5348 QQ：31794-7760 MSN:wwtrans#126.com